It supports one new eal long option '--lcores' for EAL thread cpuset assignment.
The format pattern:
--lcores='lcores[@cpus]<,lcores[@cpus]>'
lcores, cpus could be a single digit/range or a group.
'(' and ')' are necessary if it's a group.
If not supply '@cpus', the value of cpus uses the same as lcores.
e.g. '1,2@(5-7),(3-5)@(0,2),(0,6),7-8' means starting 9 EAL thread as below
lcore 0 runs on cpuset 0x41 (cpu 0,6)
lcore 1 runs on cpuset 0x2 (cpu 1)
lcore 2 runs on cpuset 0xe0 (cpu 5,6,7)
lcore 3,4,5 runs on cpuset 0x5 (cpu 0,2)
lcore 6 runs on cpuset 0x41 (cpu 0,6)
lcore 7 runs on cpuset 0x80 (cpu 7)
lcore 8 runs on cpuset 0x100 (cpu 8)
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
---
lib/librte_eal/common/eal_common_launch.c | 1 -
lib/librte_eal/common/eal_common_options.c | 300 ++++++++++++++++++++++++++++-
lib/librte_eal/common/eal_options.h | 2 +
lib/librte_eal/linuxapp/eal/Makefile | 1 +
4 files changed, 299 insertions(+), 5 deletions(-)
@@ -117,4 +117,3 @@ rte_eal_mp_wait_lcore(void)
rte_eal_wait_lcore(lcore_id);
}
}
-
@@ -45,6 +45,7 @@
#include <rte_lcore.h>
#include <rte_version.h>
#include <rte_devargs.h>
+#include <rte_memcpy.h>
#include "eal_internal_cfg.h"
#include "eal_options.h"
@@ -85,6 +86,7 @@ eal_long_options[] = {
{OPT_XEN_DOM0, 0, 0, OPT_XEN_DOM0_NUM},
{OPT_CREATE_UIO_DEV, 1, NULL, OPT_CREATE_UIO_DEV_NUM},
{OPT_VFIO_INTR, 1, NULL, OPT_VFIO_INTR_NUM},
+ {OPT_LCORES, 1, 0, OPT_LCORES_NUM},
{0, 0, 0, 0}
};
@@ -255,9 +257,11 @@ eal_parse_corelist(const char *corelist)
if (min == RTE_MAX_LCORE)
min = idx;
for (idx = min; idx <= max; idx++) {
- cfg->lcore_role[idx] = ROLE_RTE;
- lcore_config[idx].core_index = count;
- count++;
+ if (cfg->lcore_role[idx] != ROLE_RTE) {
+ cfg->lcore_role[idx] = ROLE_RTE;
+ lcore_config[idx].core_index = count;
+ count++;
+ }
}
min = RTE_MAX_LCORE;
} else
@@ -292,6 +296,279 @@ eal_parse_master_lcore(const char *arg)
return 0;
}
+/*
+ * Parse elem, the elem could be single number/range or '(' ')' group
+ * Within group elem, '-' used for a range seperator;
+ * ',' used for a single number.
+ */
+static int
+eal_parse_set(const char *input, uint16_t set[], unsigned num)
+{
+ unsigned idx;
+ const char *str = input;
+ char *end = NULL;
+ unsigned min, max;
+
+ memset(set, 0, num * sizeof(uint16_t));
+
+ while (isblank(*str))
+ str++;
+
+ /* only digit or left bracket is qulify for start point */
+ if ((!isdigit(*str) && *str != '(') || *str == '\0')
+ return -1;
+
+ /* process single number or single range of number */
+ if (*str != '(') {
+ errno = 0;
+ idx = strtoul(str, &end, 10);
+ if (errno || end == NULL || idx >= num)
+ return -1;
+ else {
+ while (isblank(*end))
+ end++;
+
+ min = idx;
+ max = idx;
+ if (*end == '-') {
+ /* proccess single <number>-<number> */
+ end++;
+ while (isblank(*end))
+ end++;
+ if (!isdigit(*end))
+ return -1;
+
+ errno = 0;
+ idx = strtoul(end, &end, 10);
+ if (errno || end == NULL || idx >= num)
+ return -1;
+ max = idx;
+ while (isblank(*end))
+ end++;
+ if (*end != ',' && *end != '\0')
+ return -1;
+ }
+
+ if (*end != ',' && *end != '\0' &&
+ *end != '@')
+ return -1;
+
+ for (idx = RTE_MIN(min, max);
+ idx <= RTE_MAX(min, max); idx++)
+ set[idx] = 1;
+
+ return end - input;
+ }
+ }
+
+ /* process set within bracket */
+ str++;
+ while (isblank(*str))
+ str++;
+ if (*str == '\0')
+ return -1;
+
+ min = RTE_MAX_LCORE;
+ do {
+
+ /* go ahead to the first digit */
+ while (isblank(*str))
+ str++;
+ if (!isdigit(*str))
+ return -1;
+
+ /* get the digit value */
+ errno = 0;
+ idx = strtoul(str, &end, 10);
+ if (errno || end == NULL || idx >= num)
+ return -1;
+
+ /* go ahead to separator '-',',' and ')' */
+ while (isblank(*end))
+ end++;
+ if (*end == '-') {
+ if (min == RTE_MAX_LCORE)
+ min = idx;
+ else /* avoid continuous '-' */
+ return -1;
+ } else if ((*end == ',') || (*end == ')')) {
+ max = idx;
+ if (min == RTE_MAX_LCORE)
+ min = idx;
+ for (idx = RTE_MIN(min, max);
+ idx <= RTE_MAX(min, max); idx++)
+ set[idx] = 1;
+
+ min = RTE_MAX_LCORE;
+ } else
+ return -1;
+
+ str = end + 1;
+ } while (*end != '\0' && *end != ')');
+
+ return str - input;
+}
+
+/* convert from set array to cpuset bitmap */
+static inline int
+convert_to_cpuset(rte_cpuset_t *cpusetp,
+ uint16_t *set, unsigned num)
+{
+ unsigned idx;
+
+ CPU_ZERO(cpusetp);
+
+ for (idx = 0; idx < num; idx++) {
+ if (!set[idx])
+ continue;
+
+ if (!lcore_config[idx].detected) {
+ RTE_LOG(ERR, EAL, "core %u "
+ "unavailable\n", idx);
+ return -1;
+ }
+
+ CPU_SET(idx, cpusetp);
+ }
+
+ return 0;
+}
+
+/*
+ * The format pattern: --lcores='lcores[@cpus]<,lcores[@cpus]>'
+ * lcores, cpus could be a single digit/range or a group.
+ * '(' and ')' are necessary if it's a group.
+ * If not supply '@cpus', the value of cpus uses the same as lcores.
+ * e.g. '1,2@(5-7),(3-5)@(0,2),(0,6),7-8' means start 9 EAL thread as below
+ * lcore 0 runs on cpuset 0x41 (cpu 0,6)
+ * lcore 1 runs on cpuset 0x2 (cpu 1)
+ * lcore 2 runs on cpuset 0xe0 (cpu 5,6,7)
+ * lcore 3,4,5 runs on cpuset 0x5 (cpu 0,2)
+ * lcore 6 runs on cpuset 0x41 (cpu 0,6)
+ * lcore 7 runs on cpuset 0x80 (cpu 7)
+ * lcore 8 runs on cpuset 0x100 (cpu 8)
+ */
+static int
+eal_parse_lcores(const char *lcores)
+{
+ struct rte_config *cfg = rte_eal_get_configuration();
+ static uint16_t set[RTE_MAX_LCORE];
+ unsigned idx = 0;
+ int i;
+ unsigned count = 0;
+ const char *lcore_start = NULL;
+ const char *end = NULL;
+ int offset;
+ rte_cpuset_t cpuset;
+ int lflags = 0;
+ int ret = -1;
+
+ if (lcores == NULL)
+ return -1;
+
+ /* Remove all blank characters ahead and after */
+ while (isblank(*lcores))
+ lcores++;
+ i = strnlen(lcores, sysconf(_SC_ARG_MAX));
+ while ((i > 0) && isblank(lcores[i - 1]))
+ i--;
+
+ CPU_ZERO(&cpuset);
+
+ /* Reset lcore config */
+ for (idx = 0; idx < RTE_MAX_LCORE; idx++) {
+ cfg->lcore_role[idx] = ROLE_OFF;
+ lcore_config[idx].core_index = -1;
+ CPU_ZERO(&lcore_config[idx].cpuset);
+ }
+
+ /* Get list of cores */
+ do {
+ while (isblank(*lcores))
+ lcores++;
+ if (*lcores == '\0')
+ goto err;
+
+ /* record lcore_set start point */
+ lcore_start = lcores;
+
+ /* go across a complete bracket */
+ if (*lcore_start == '(') {
+ lcores += strcspn(lcores, ")");
+ if (*lcores++ == '\0')
+ goto err;
+ }
+
+ /* scan the separator '@', ','(next) or '\0'(finish) */
+ lcores += strcspn(lcores, "@,");
+
+ if (*lcores == '@') {
+ /* explict assign cpu_set */
+ offset = eal_parse_set(lcores + 1, set, RTE_DIM(set));
+ if (offset < 0)
+ goto err;
+
+ /* prepare cpu_set and update the end cursor */
+ if (0 > convert_to_cpuset(&cpuset,
+ set, RTE_DIM(set)))
+ goto err;
+ end = lcores + 1 + offset;
+ } else { /* ',' or '\0' */
+ /* haven't given cpu_set, current loop done */
+ end = lcores;
+
+ /* go back to check <number>-<number> */
+ offset = strcspn(lcore_start, "-");
+ if (offset < (end - lcore_start))
+ lflags = 1;
+ }
+
+ if (*end != ',' && *end != '\0')
+ goto err;
+
+ /* parse lcore_set from start point */
+ if (0 > eal_parse_set(lcore_start, set, RTE_DIM(set)))
+ goto err;
+
+ /* without '@', by default using lcore_set as cpu_set */
+ if (*lcores != '@' &&
+ 0 > convert_to_cpuset(&cpuset, set, RTE_DIM(set)))
+ goto err;
+
+ /* start to update lcore_set */
+ for (idx = 0; idx < RTE_MAX_LCORE; idx++) {
+ if (!set[idx])
+ continue;
+
+ if (cfg->lcore_role[idx] != ROLE_RTE) {
+ lcore_config[idx].core_index = count;
+ cfg->lcore_role[idx] = ROLE_RTE;
+ count++;
+ }
+
+ if (lflags) {
+ CPU_ZERO(&cpuset);
+ CPU_SET(idx, &cpuset);
+ }
+ rte_memcpy(&lcore_config[idx].cpuset, &cpuset,
+ sizeof(rte_cpuset_t));
+ }
+
+ lcores = end + 1;
+ } while (*end != '\0');
+
+ if (count == 0)
+ goto err;
+
+ cfg->lcore_count = count;
+ lcores_parsed = 1;
+ ret = 0;
+
+err:
+
+ return ret;
+}
+
static int
eal_parse_syslog(const char *facility, struct internal_config *conf)
{
@@ -492,6 +769,13 @@ eal_parse_common_option(int opt, const char *optarg,
conf->log_level = log;
break;
}
+ case OPT_LCORES_NUM:
+ if (eal_parse_lcores(optarg) < 0) {
+ RTE_LOG(ERR, EAL, "invalid parameter for --"
+ OPT_LCORES "\n");
+ return -1;
+ }
+ break;
/* don't know what to do, leave this to caller */
default:
@@ -530,7 +814,7 @@ eal_check_common_options(struct internal_config *internal_cfg)
if (!lcores_parsed) {
RTE_LOG(ERR, EAL, "CPU cores must be enabled with options "
- "-c or -l\n");
+ "-c, -l or --lcores\n");
return -1;
}
if (cfg->lcore_role[cfg->master_lcore] != ROLE_RTE) {
@@ -586,6 +870,14 @@ eal_common_usage(void)
" The argument format is <c1>[-c2][,c3[-c4],...]\n"
" where c1, c2, etc are core indexes between 0 and %d\n"
" --"OPT_MASTER_LCORE" ID: Core ID that is used as master\n"
+ " --"OPT_LCORES" MAP: maps between lcore_set to phys_cpu_set\n"
+ " The argument format is\n"
+ " 'lcores[@cpus]<,lcores[@cpus],...>'\n"
+ " lcores and cpus list are grouped by '(' and ')'\n"
+ " Within the group, '-' is used for range separator,\n"
+ " ',' is used for single number separator.\n"
+ " '( )' can be omitted for single element group, '@' \n"
+ " can be omitted if cpus and lcores has the same value\n"
" -n NUM : Number of memory channels\n"
" -v : Display version information on startup\n"
" -m MB : memory to allocate (see also --"OPT_SOCKET_MEM")\n"
@@ -77,6 +77,8 @@ enum {
OPT_CREATE_UIO_DEV_NUM,
#define OPT_VFIO_INTR "vfio-intr"
OPT_VFIO_INTR_NUM,
+#define OPT_LCORES "lcores"
+ OPT_LCORES_NUM,
OPT_LONG_MAX_NUM
};
@@ -95,6 +95,7 @@ CFLAGS_eal_hugepage_info.o := -D_GNU_SOURCE
CFLAGS_eal_pci.o := -D_GNU_SOURCE
CFLAGS_eal_pci_vfio.o := -D_GNU_SOURCE
CFLAGS_eal_common_whitelist.o := -D_GNU_SOURCE
+CFLAGS_eal_common_options.o := -D_GNU_SOURCE
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603