[dpdk-dev,05/12] lib/librte_vhost: copy host_memory_map from virtio-net.c to a new file virtio-net-cdev.c
Commit Message
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
lib/librte_vhost/vhost_cuse/virtio-net-cdev.c | 258 ++++++++++++++++++++++++++
1 file changed, 258 insertions(+)
create mode 100644 lib/librte_vhost/vhost_cuse/virtio-net-cdev.c
Comments
On 2015/01/30 15:36, Huawei Xie wrote:
> Signed-off-by: Huawei Xie <huawei.xie@intel.com>
> ---
> lib/librte_vhost/vhost_cuse/virtio-net-cdev.c | 258 ++++++++++++++++++++++++++
> 1 file changed, 258 insertions(+)
> create mode 100644 lib/librte_vhost/vhost_cuse/virtio-net-cdev.c
>
> diff --git a/lib/librte_vhost/vhost_cuse/virtio-net-cdev.c b/lib/librte_vhost/vhost_cuse/virtio-net-cdev.c
> new file mode 100644
> index 0000000..fbfc403
> --- /dev/null
> +++ b/lib/librte_vhost/vhost_cuse/virtio-net-cdev.c
> @@ -0,0 +1,258 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stdint.h>
> +#include <dirent.h>
> +#include <linux/vhost.h>
> +#include <linux/virtio_net.h>
> +#include <fuse/cuse_lowlevel.h>
> +#include <stddef.h>
> +#include <string.h>
> +#include <stdlib.h>
> +#include <sys/eventfd.h>
> +#include <sys/mman.h>
> +#include <sys/types.h>
> +#include <unistd.h>
> +#include <errno.h>
> +
> +#include <rte_log.h>
> +
> +#include "vhost-net.h"
> +
> +/* Line size for reading maps file. */
> +static const uint32_t BUFSIZE = PATH_MAX;
> +
> +/* Size of prot char array in procmap. */
> +#define PROT_SZ 5
> +
> +/* Number of elements in procmap struct. */
> +#define PROCMAP_SZ 8
> +
> +/* Structure containing information gathered from maps file. */
> +struct procmap {
> + uint64_t va_start; /* Start virtual address in file. */
> + uint64_t len; /* Size of file. */
> + uint64_t pgoff; /* Not used. */
> + uint32_t maj; /* Not used. */
> + uint32_t min; /* Not used. */
> + uint32_t ino; /* Not used. */
> + char prot[PROT_SZ]; /* Not used. */
> + char fname[PATH_MAX]; /* File name. */
> +};
> +
> +/*
> + * Locate the file containing QEMU's memory space and
> + * map it to our address space.
> + */
> +static int
> +host_memory_map(struct virtio_net *dev, struct virtio_memory *mem,
> + pid_t pid, uint64_t addr)
> +{
Hi Xie,
This patch only copy host_memory_map() to a new file.
And actually the original function is removed at below patch.
- "[PATCH 07/12] lib/librte_vhost: split set_memory_table into two parts"
Is it difficult to remove and copy the function in this patch?
Thanks,
Tetsuya
> + struct dirent *dptr = NULL;
> + struct procmap procmap;
> + DIR *dp = NULL;
> + int fd;
> + int i;
> + char memfile[PATH_MAX];
> + char mapfile[PATH_MAX];
> + char procdir[PATH_MAX];
> + char resolved_path[PATH_MAX];
> + char *path = NULL;
> + FILE *fmap;
> + void *map;
> + uint8_t found = 0;
> + char line[BUFSIZE];
> + char dlm[] = "- : ";
> + char *str, *sp, *in[PROCMAP_SZ];
> + char *end = NULL;
> +
> + /* Path where mem files are located. */
> + snprintf(procdir, PATH_MAX, "/proc/%u/fd/", pid);
> + /* Maps file used to locate mem file. */
> + snprintf(mapfile, PATH_MAX, "/proc/%u/maps", pid);
> +
> + fmap = fopen(mapfile, "r");
> + if (fmap == NULL) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Failed to open maps file for pid %d\n",
> + dev->device_fh, pid);
> + return -1;
> + }
> +
> + /* Read through maps file until we find out base_address. */
> + while (fgets(line, BUFSIZE, fmap) != 0) {
> + str = line;
> + errno = 0;
> + /* Split line into fields. */
> + for (i = 0; i < PROCMAP_SZ; i++) {
> + in[i] = strtok_r(str, &dlm[i], &sp);
> + if ((in[i] == NULL) || (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> + str = NULL;
> + }
> +
> + /* Convert/Copy each field as needed. */
> + procmap.va_start = strtoull(in[0], &end, 16);
> + if ((in[0] == '\0') || (end == NULL) || (*end != '\0') ||
> + (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> +
> + procmap.len = strtoull(in[1], &end, 16);
> + if ((in[1] == '\0') || (end == NULL) || (*end != '\0') ||
> + (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> +
> + procmap.pgoff = strtoull(in[3], &end, 16);
> + if ((in[3] == '\0') || (end == NULL) || (*end != '\0') ||
> + (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> +
> + procmap.maj = strtoul(in[4], &end, 16);
> + if ((in[4] == '\0') || (end == NULL) || (*end != '\0') ||
> + (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> +
> + procmap.min = strtoul(in[5], &end, 16);
> + if ((in[5] == '\0') || (end == NULL) || (*end != '\0') ||
> + (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> +
> + procmap.ino = strtoul(in[6], &end, 16);
> + if ((in[6] == '\0') || (end == NULL) || (*end != '\0') ||
> + (errno != 0)) {
> + fclose(fmap);
> + return -1;
> + }
> +
> + memcpy(&procmap.prot, in[2], PROT_SZ);
> + memcpy(&procmap.fname, in[7], PATH_MAX);
> +
> + if (procmap.va_start == addr) {
> + procmap.len = procmap.len - procmap.va_start;
> + found = 1;
> + break;
> + }
> + }
> + fclose(fmap);
> +
> + if (!found) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Failed to find memory file in pid %d maps file\n",
> + dev->device_fh, pid);
> + return -1;
> + }
> +
> + /* Find the guest memory file among the process fds. */
> + dp = opendir(procdir);
> + if (dp == NULL) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Cannot open pid %d process directory\n",
> + dev->device_fh, pid);
> + return -1;
> + }
> +
> + found = 0;
> +
> + /* Read the fd directory contents. */
> + while (NULL != (dptr = readdir(dp))) {
> + snprintf(memfile, PATH_MAX, "/proc/%u/fd/%s",
> + pid, dptr->d_name);
> + path = realpath(memfile, resolved_path);
> + if ((path == NULL) && (strlen(resolved_path) == 0)) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Failed to resolve fd directory\n",
> + dev->device_fh);
> + closedir(dp);
> + return -1;
> + }
> + if (strncmp(resolved_path, procmap.fname,
> + strnlen(procmap.fname, PATH_MAX)) == 0) {
> + found = 1;
> + break;
> + }
> + }
> +
> + closedir(dp);
> +
> + if (found == 0) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Failed to find memory file for pid %d\n",
> + dev->device_fh, pid);
> + return -1;
> + }
> + /* Open the shared memory file and map the memory into this process. */
> + fd = open(memfile, O_RDWR);
> +
> + if (fd == -1) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Failed to open %s for pid %d\n",
> + dev->device_fh, memfile, pid);
> + return -1;
> + }
> +
> + map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE,
> + MAP_POPULATE|MAP_SHARED, fd, 0);
> + close(fd);
> +
> + if (map == MAP_FAILED) {
> + RTE_LOG(ERR, VHOST_CONFIG,
> + "(%"PRIu64") Error mapping the file %s for pid %d\n",
> + dev->device_fh, memfile, pid);
> + return -1;
> + }
> +
> + /* Store the memory address and size in the device data structure */
> + mem->mapped_address = (uint64_t)(uintptr_t)map;
> + mem->mapped_size = procmap.len;
> +
> + LOG_DEBUG(VHOST_CONFIG,
> + "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n",
> + dev->device_fh,
> + memfile, resolved_path,
> + (unsigned long long)mem->mapped_size, map);
> +
> + return 0;
> +}
> +
> > + * map it to our address space.
> > + */
> > +static int
> > +host_memory_map(struct virtio_net *dev, struct virtio_memory *mem,
> > + pid_t pid, uint64_t addr)
> > +{
>
> Hi Xie,
>
> This patch only copy host_memory_map() to a new file.
> And actually the original function is removed at below patch.
> - "[PATCH 07/12] lib/librte_vhost: split set_memory_table into two parts"
>
> Is it difficult to remove and copy the function in this patch?
The purpose of splitting into several patches is to be reviewer friendly.
You could easily check the changes between each commit.
>
> Thanks,
> Tetsuya
>
On 2015/02/01 0:16, Xie, Huawei wrote:
>>> + * map it to our address space.
>>> + */
>>> +static int
>>> +host_memory_map(struct virtio_net *dev, struct virtio_memory *mem,
>>> + pid_t pid, uint64_t addr)
>>> +{
>> Hi Xie,
>>
>> This patch only copy host_memory_map() to a new file.
>> And actually the original function is removed at below patch.
>> - "[PATCH 07/12] lib/librte_vhost: split set_memory_table into two parts"
>>
>> Is it difficult to remove and copy the function in this patch?
> The purpose of splitting into several patches is to be reviewer friendly.
> You could easily check the changes between each commit.
OK, Thanks.
Tetsuya
>> Thanks,
>> Tetsuya
>>
new file mode 100644
@@ -0,0 +1,258 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <dirent.h>
+#include <linux/vhost.h>
+#include <linux/virtio_net.h>
+#include <fuse/cuse_lowlevel.h>
+#include <stddef.h>
+#include <string.h>
+#include <stdlib.h>
+#include <sys/eventfd.h>
+#include <sys/mman.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <errno.h>
+
+#include <rte_log.h>
+
+#include "vhost-net.h"
+
+/* Line size for reading maps file. */
+static const uint32_t BUFSIZE = PATH_MAX;
+
+/* Size of prot char array in procmap. */
+#define PROT_SZ 5
+
+/* Number of elements in procmap struct. */
+#define PROCMAP_SZ 8
+
+/* Structure containing information gathered from maps file. */
+struct procmap {
+ uint64_t va_start; /* Start virtual address in file. */
+ uint64_t len; /* Size of file. */
+ uint64_t pgoff; /* Not used. */
+ uint32_t maj; /* Not used. */
+ uint32_t min; /* Not used. */
+ uint32_t ino; /* Not used. */
+ char prot[PROT_SZ]; /* Not used. */
+ char fname[PATH_MAX]; /* File name. */
+};
+
+/*
+ * Locate the file containing QEMU's memory space and
+ * map it to our address space.
+ */
+static int
+host_memory_map(struct virtio_net *dev, struct virtio_memory *mem,
+ pid_t pid, uint64_t addr)
+{
+ struct dirent *dptr = NULL;
+ struct procmap procmap;
+ DIR *dp = NULL;
+ int fd;
+ int i;
+ char memfile[PATH_MAX];
+ char mapfile[PATH_MAX];
+ char procdir[PATH_MAX];
+ char resolved_path[PATH_MAX];
+ char *path = NULL;
+ FILE *fmap;
+ void *map;
+ uint8_t found = 0;
+ char line[BUFSIZE];
+ char dlm[] = "- : ";
+ char *str, *sp, *in[PROCMAP_SZ];
+ char *end = NULL;
+
+ /* Path where mem files are located. */
+ snprintf(procdir, PATH_MAX, "/proc/%u/fd/", pid);
+ /* Maps file used to locate mem file. */
+ snprintf(mapfile, PATH_MAX, "/proc/%u/maps", pid);
+
+ fmap = fopen(mapfile, "r");
+ if (fmap == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to open maps file for pid %d\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Read through maps file until we find out base_address. */
+ while (fgets(line, BUFSIZE, fmap) != 0) {
+ str = line;
+ errno = 0;
+ /* Split line into fields. */
+ for (i = 0; i < PROCMAP_SZ; i++) {
+ in[i] = strtok_r(str, &dlm[i], &sp);
+ if ((in[i] == NULL) || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+ str = NULL;
+ }
+
+ /* Convert/Copy each field as needed. */
+ procmap.va_start = strtoull(in[0], &end, 16);
+ if ((in[0] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.len = strtoull(in[1], &end, 16);
+ if ((in[1] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.pgoff = strtoull(in[3], &end, 16);
+ if ((in[3] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.maj = strtoul(in[4], &end, 16);
+ if ((in[4] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.min = strtoul(in[5], &end, 16);
+ if ((in[5] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.ino = strtoul(in[6], &end, 16);
+ if ((in[6] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ memcpy(&procmap.prot, in[2], PROT_SZ);
+ memcpy(&procmap.fname, in[7], PATH_MAX);
+
+ if (procmap.va_start == addr) {
+ procmap.len = procmap.len - procmap.va_start;
+ found = 1;
+ break;
+ }
+ }
+ fclose(fmap);
+
+ if (!found) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find memory file in pid %d maps file\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Find the guest memory file among the process fds. */
+ dp = opendir(procdir);
+ if (dp == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Cannot open pid %d process directory\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+
+ found = 0;
+
+ /* Read the fd directory contents. */
+ while (NULL != (dptr = readdir(dp))) {
+ snprintf(memfile, PATH_MAX, "/proc/%u/fd/%s",
+ pid, dptr->d_name);
+ path = realpath(memfile, resolved_path);
+ if ((path == NULL) && (strlen(resolved_path) == 0)) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to resolve fd directory\n",
+ dev->device_fh);
+ closedir(dp);
+ return -1;
+ }
+ if (strncmp(resolved_path, procmap.fname,
+ strnlen(procmap.fname, PATH_MAX)) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ closedir(dp);
+
+ if (found == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find memory file for pid %d\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+ /* Open the shared memory file and map the memory into this process. */
+ fd = open(memfile, O_RDWR);
+
+ if (fd == -1) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to open %s for pid %d\n",
+ dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE,
+ MAP_POPULATE|MAP_SHARED, fd, 0);
+ close(fd);
+
+ if (map == MAP_FAILED) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Error mapping the file %s for pid %d\n",
+ dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ /* Store the memory address and size in the device data structure */
+ mem->mapped_address = (uint64_t)(uintptr_t)map;
+ mem->mapped_size = procmap.len;
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n",
+ dev->device_fh,
+ memfile, resolved_path,
+ (unsigned long long)mem->mapped_size, map);
+
+ return 0;
+}
+