[v4] pci: support both PIO and MMIO BAR for legacy virtio on x86

Message ID 1602578499-13975-2-git-send-email-huawei.xhw@alibaba-inc.com (mailing list archive)
State Superseded, archived
Delegated to: David Marchand
Headers
Series [v4] pci: support both PIO and MMIO BAR for legacy virtio on x86 |

Checks

Context Check Description
ci/checkpatch warning coding style issues
ci/iol-broadcom-Performance success Performance Testing PASS
ci/iol-testing success Testing PASS
ci/iol-broadcom-Functional success Functional Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/iol-mellanox-Performance success Performance Testing PASS
ci/travis-robot warning Travis build: failed
ci/Intel-compilation success Compilation OK

Commit Message

谢华伟(此时此刻) Oct. 13, 2020, 8:41 a.m. UTC
From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>

Legacy virtio-pci only supports PIO BAR resource. As we need to create lots of
virtio devices and PIO resource on x86 is very limited, we expose MMIO BAR.

Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. We handles
different type of BAR in the similar way.

In previous implementation, with igb_uio we get PIO address from igb_uio
sysfs entry; with uio_pci_generic, we get PIO address from
/proc/ioports.
For PIO/MMIO RW, there is different path for different drivers and arch.
For VFIO, PIO/MMIO RW is through syscall, which has big performance
issue.
On X86, it assumes only PIO is supported.

All of the above is too much twisted.
This patch unifies the way to get both PIO and MMIO address for different driver
and arch, all from standard resource attr under pci sysfs.

We distinguish PIO and MMIO by their address like how kernel does. It is ugly but works.

Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
---
 drivers/bus/pci/linux/pci.c     |  89 +--------------------
 drivers/bus/pci/linux/pci_uio.c | 167 +++++++++++++++++++++++++++-------------
 2 files changed, 119 insertions(+), 137 deletions(-)
  

Comments

谢华伟(此时此刻) Oct. 13, 2020, 12:34 p.m. UTC | #1
>   	switch (p->dev->kdrv) {
>   #ifdef VFIO_PRESENT
>   	case RTE_PCI_KDRV_VFIO:
> -		pci_vfio_ioport_read(p, data, len, offset);
> +		pci_uio_ioport_read(p, data, len, offset);
>   		break;
>   #endif
>   	case RTE_PCI_KDRV_IGB_UIO:
> -		pci_uio_ioport_read(p, data, len, offset);
> -		break;
>   	case RTE_PCI_KDRV_UIO_GENERIC:
>   		pci_uio_ioport_read(p, data, len, offset);
>   }


Maxime:

With this patch, virtio PIO/MMIO port RW is directly through user space 
instruction instead of vfio ioctl syscall.

/huawei
  
谢华伟(此时此刻) Oct. 21, 2020, 8:46 a.m. UTC | #2
Hi Ferruh:

Comments to this patch? Customers are urging us to run DPDK with virtio 
mmio support.

@david


Though this patch is to support MMIO bar, it is the right thing to do.

Previous code with virtio (IO/MMIO) port map/RW under different driver 
is too complicated.

This patch also fixes the performance issue with VFIO port write(virtio 
only).

Besides, next thing we could do is to move some of those PCI codes to 
virtio PMD as they are for virtio

PMD only.

/huawei


On 2020/10/13 16:41, 谢华伟(此时此刻) wrote:
> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
>
> Legacy virtio-pci only supports PIO BAR resource. As we need to create lots of
> virtio devices and PIO resource on x86 is very limited, we expose MMIO BAR.
>
> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. We handles
> different type of BAR in the similar way.
>
> In previous implementation, with igb_uio we get PIO address from igb_uio
> sysfs entry; with uio_pci_generic, we get PIO address from
> /proc/ioports.
> For PIO/MMIO RW, there is different path for different drivers and arch.
> For VFIO, PIO/MMIO RW is through syscall, which has big performance
> issue.
> On X86, it assumes only PIO is supported.
>
> All of the above is too much twisted.
> This patch unifies the way to get both PIO and MMIO address for different driver
> and arch, all from standard resource attr under pci sysfs.
>
> We distinguish PIO and MMIO by their address like how kernel does. It is ugly but works.
>
> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
> ---
>   drivers/bus/pci/linux/pci.c     |  89 +--------------------
>   drivers/bus/pci/linux/pci_uio.c | 167 +++++++++++++++++++++++++++-------------
>   2 files changed, 119 insertions(+), 137 deletions(-)
>
> diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
> index bf27594..885e54e 100644
> --- a/drivers/bus/pci/linux/pci.c
> +++ b/drivers/bus/pci/linux/pci.c
> @@ -687,71 +687,6 @@ int rte_pci_write_config(const struct rte_pci_device *device,
>   	}
>   }
>   
>
  
Ferruh Yigit Oct. 21, 2020, 11:49 a.m. UTC | #3
On 10/13/2020 9:41 AM, 谢华伟(此时此刻) wrote:
> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
> 
> Legacy virtio-pci only supports PIO BAR resource. As we need to create lots of
> virtio devices and PIO resource on x86 is very limited, we expose MMIO BAR.
> 
> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. We handles
> different type of BAR in the similar way.
> 
> In previous implementation, with igb_uio we get PIO address from igb_uio
> sysfs entry; with uio_pci_generic, we get PIO address from
> /proc/ioports.
> For PIO/MMIO RW, there is different path for different drivers and arch.
> For VFIO, PIO/MMIO RW is through syscall, which has big performance
> issue.
> On X86, it assumes only PIO is supported.
> 
> All of the above is too much twisted.
> This patch unifies the way to get both PIO and MMIO address for different driver
> and arch, all from standard resource attr under pci sysfs.
> 

As mentined above this patch does multiple things.

The main target is, as far as I understand, you have a legacy virtio device 
which supports "memory-mapped I/O" and "port-mapped I/O", but virtio logic 
forces legacy devices to use the PIO but you want to be able to use the MMIO 
with this device.

The solution below is adding MMIO support in the PIO funciton, and distinguish 
MMIO or PIO based on their address check.

Instead of this, can't this be resolved in the virtio side, like if the legacy 
device supports MMIO (detect this somehow) use the MMIO istead of hacking PIO 
mapping to support MMIO?

I have other concerns, specially mergin VFIO mapping too, but lets clarify above 
first.

Thanks,
ferruh



> We distinguish PIO and MMIO by their address like how kernel does. It is ugly but works.
> 
> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
> ---
>   drivers/bus/pci/linux/pci.c     |  89 +--------------------
>   drivers/bus/pci/linux/pci_uio.c | 167 +++++++++++++++++++++++++++-------------
>   2 files changed, 119 insertions(+), 137 deletions(-)
> 
> diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
> index bf27594..885e54e 100644
> --- a/drivers/bus/pci/linux/pci.c
> +++ b/drivers/bus/pci/linux/pci.c
> @@ -687,71 +687,6 @@ int rte_pci_write_config(const struct rte_pci_device *device,
>   	}
>   }
>   
> -#if defined(RTE_ARCH_X86)
> -static int
> -pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
> -		struct rte_pci_ioport *p)
> -{
> -	uint16_t start, end;
> -	FILE *fp;
> -	char *line = NULL;
> -	char pci_id[16];
> -	int found = 0;
> -	size_t linesz;
> -
> -	if (rte_eal_iopl_init() != 0) {
> -		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
> -			__func__, dev->name);
> -		return -1;
> -	}
> -
> -	snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
> -		 dev->addr.domain, dev->addr.bus,
> -		 dev->addr.devid, dev->addr.function);
> -
> -	fp = fopen("/proc/ioports", "r");
> -	if (fp == NULL) {
> -		RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
> -		return -1;
> -	}
> -
> -	while (getdelim(&line, &linesz, '\n', fp) > 0) {
> -		char *ptr = line;
> -		char *left;
> -		int n;
> -
> -		n = strcspn(ptr, ":");
> -		ptr[n] = 0;
> -		left = &ptr[n + 1];
> -
> -		while (*left && isspace(*left))
> -			left++;
> -
> -		if (!strncmp(left, pci_id, strlen(pci_id))) {
> -			found = 1;
> -
> -			while (*ptr && isspace(*ptr))
> -				ptr++;
> -
> -			sscanf(ptr, "%04hx-%04hx", &start, &end);
> -
> -			break;
> -		}
> -	}
> -
> -	free(line);
> -	fclose(fp);
> -
> -	if (!found)
> -		return -1;
> -
> -	p->base = start;
> -	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
> -
> -	return 0;
> -}
> -#endif
> -
>   int
>   rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
>   		struct rte_pci_ioport *p)
> @@ -762,18 +697,12 @@ int rte_pci_write_config(const struct rte_pci_device *device,
>   #ifdef VFIO_PRESENT
>   	case RTE_PCI_KDRV_VFIO:
>   		if (pci_vfio_is_enabled())
> -			ret = pci_vfio_ioport_map(dev, bar, p);
> +			ret = pci_uio_ioport_map(dev, bar, p);
>   		break;
>   #endif
>   	case RTE_PCI_KDRV_IGB_UIO:
> -		ret = pci_uio_ioport_map(dev, bar, p);
> -		break;
>   	case RTE_PCI_KDRV_UIO_GENERIC:
> -#if defined(RTE_ARCH_X86)
> -		ret = pci_ioport_map(dev, bar, p);
> -#else
>   		ret = pci_uio_ioport_map(dev, bar, p);
> -#endif
>   		break;
>   	default:
>   		break;
> @@ -792,12 +721,10 @@ int rte_pci_write_config(const struct rte_pci_device *device,
>   	switch (p->dev->kdrv) {
>   #ifdef VFIO_PRESENT
>   	case RTE_PCI_KDRV_VFIO:
> -		pci_vfio_ioport_read(p, data, len, offset);
> +		pci_uio_ioport_read(p, data, len, offset);
>   		break;
>   #endif
>   	case RTE_PCI_KDRV_IGB_UIO:
> -		pci_uio_ioport_read(p, data, len, offset);
> -		break;
>   	case RTE_PCI_KDRV_UIO_GENERIC:
>   		pci_uio_ioport_read(p, data, len, offset);
>   		break;
> @@ -813,12 +740,10 @@ int rte_pci_write_config(const struct rte_pci_device *device,
>   	switch (p->dev->kdrv) {
>   #ifdef VFIO_PRESENT
>   	case RTE_PCI_KDRV_VFIO:
> -		pci_vfio_ioport_write(p, data, len, offset);
> +		pci_uio_ioport_write(p, data, len, offset);
>   		break;
>   #endif
>   	case RTE_PCI_KDRV_IGB_UIO:
> -		pci_uio_ioport_write(p, data, len, offset);
> -		break;
>   	case RTE_PCI_KDRV_UIO_GENERIC:
>   		pci_uio_ioport_write(p, data, len, offset);
>   		break;
> @@ -836,18 +761,12 @@ int rte_pci_write_config(const struct rte_pci_device *device,
>   #ifdef VFIO_PRESENT
>   	case RTE_PCI_KDRV_VFIO:
>   		if (pci_vfio_is_enabled())
> -			ret = pci_vfio_ioport_unmap(p);
> +			ret = pci_uio_ioport_unmap(p);
>   		break;
>   #endif
>   	case RTE_PCI_KDRV_IGB_UIO:
> -		ret = pci_uio_ioport_unmap(p);
> -		break;
>   	case RTE_PCI_KDRV_UIO_GENERIC:
> -#if defined(RTE_ARCH_X86)
> -		ret = 0;
> -#else
>   		ret = pci_uio_ioport_unmap(p);
> -#endif
>   		break;
>   	default:
>   		break;
> diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
> index f3305a2..0062ac0 100644
> --- a/drivers/bus/pci/linux/pci_uio.c
> +++ b/drivers/bus/pci/linux/pci_uio.c
> @@ -22,6 +22,7 @@
>   #include <rte_bus_pci.h>
>   #include <rte_common.h>
>   #include <rte_malloc.h>
> +#include <rte_bus.h>
>   
>   #include "eal_filesystem.h"
>   #include "pci_init.h"
> @@ -373,52 +374,83 @@
>   pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
>   		   struct rte_pci_ioport *p)
>   {
> +	FILE *f = NULL;
>   	char dirname[PATH_MAX];
>   	char filename[PATH_MAX];
> +	char buf[BUFSIZ];
> +	uint64_t phys_addr, end_addr, flags;
>   	int uio_num;
> -	unsigned long start;
> +	unsigned long base;
> +	bool iobar;
> +	int i;
>   
> -	if (rte_eal_iopl_init() != 0) {
> -		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
> -			__func__, dev->name);
> +	/* open and read addresses of the corresponding resource in sysfs */
> +	snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
> +		rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
> +		dev->addr.devid, dev->addr.function);
> +	f = fopen(filename, "r");
> +	if (f == NULL) {
> +		RTE_LOG(ERR, EAL, "Cannot open sysfs resource: %s\n",
> +			strerror(errno));
>   		return -1;
>   	}
>   
> -	uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
> -	if (uio_num < 0)
> -		return -1;
> +	for (i = 0; i < bar + 1; i++) {
> +		if (fgets(buf, sizeof(buf), f) == NULL) {
> +			RTE_LOG(ERR, EAL, "Cannot read sysfs resource\n");
> +			goto error;
> +		}
> +	}
> +	if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
> +		&end_addr, &flags) < 0)
> +		goto error;
>   
> -	/* get portio start */
> -	snprintf(filename, sizeof(filename),
> -		 "%s/portio/port%d/start", dirname, bar);
> -	if (eal_parse_sysfs_value(filename, &start) < 0) {
> -		RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
> -			__func__);
> -		return -1;
> +	if (flags & IORESOURCE_IO) {
> +		iobar = 1;
> +		base = (unsigned long)phys_addr;
> +		RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
> +	} else if (flags & IORESOURCE_MEM) {
> +		iobar = 0;
> +		base = (unsigned long)dev->mem_resource[bar].addr;
> +		RTE_LOG(INFO, EAL, "%s(): MMIO BAR %08lx detected\n", __func__, base);
> +	} else {
> +		RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
> +		goto error;
> +	}
> +
> +	if (iobar && rte_eal_iopl_init() != 0) {
> +		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
> +			__func__, dev->name);
> +		goto error;
>   	}
> -	/* ensure we don't get anything funny here, read/write will cast to
> -	 * uin16_t */
> -	if (start > UINT16_MAX)
> -		return -1;
>   
>   	/* FIXME only for primary process ? */
> -	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
> +	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN &&
> +	    dev->kdrv == RTE_PCI_KDRV_UIO_GENERIC) {
> +		uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
> +		if (uio_num < 0)
> +			goto error;
>   
>   		snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
>   		dev->intr_handle.fd = open(filename, O_RDWR);
>   		if (dev->intr_handle.fd < 0) {
>   			RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
>   				filename, strerror(errno));
> -			return -1;
> +			goto error;
>   		}
>   		dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
>   	}
>   
> -	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", start);
> +	RTE_LOG(DEBUG, EAL, "PCI IO port found start=0x%lx\n", base);
>   
> -	p->base = start;
> +	p->base = base;
>   	p->len = 0;
> +	fclose(f);
>   	return 0;
> +error:
> +	if (f)
> +		fclose(f);
> +	return -1;
>   }
>   #else
>   int
> @@ -489,6 +521,61 @@
>   }
>   #endif
>   
> +#define PIO_MAX 0x10000
> +static inline uint8_t ioread8(void *addr)
> +{
> +	uint8_t val;
> +
> +	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
> +		*(volatile uint8_t *)addr :
> +		inb((unsigned long)addr);
> +
> +	return val;
> +}
> +
> +static inline uint16_t ioread16(void *addr)
> +{
> +	uint16_t val;
> +
> +	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
> +		*(volatile uint16_t *)addr :
> +		inw((unsigned long)addr);
> +
> +	return val;
> +}
> +
> +static inline uint32_t ioread32(void *addr)
> +{
> +	uint32_t val;
> +
> +	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
> +		*(volatile uint32_t *)addr :
> +	inl((unsigned long)addr);
> +
> +	return val;
> +}
> +
> +static inline void iowrite8(uint8_t val, void *addr)
> +{
> +	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
> +		*(volatile uint8_t *)addr = val :
> +		outb(val, (unsigned long)addr);
> +}
> +
> +static inline void iowrite16(uint16_t val, void *addr)
> +{
> +	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
> +		*(volatile uint16_t *)addr = val :
> +		outw(val, (unsigned long)addr);
> +}
> +
> +static inline void iowrite32(uint32_t val, void *addr)
> +{
> +	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
> +		*(volatile uint32_t *)addr = val :
> +		outl(val, (unsigned long)addr);
> +}
> +
>   void
>   pci_uio_ioport_read(struct rte_pci_ioport *p,
>   		    void *data, size_t len, off_t offset)
> @@ -500,25 +587,13 @@
>   	for (d = data; len > 0; d += size, reg += size, len -= size) {
>   		if (len >= 4) {
>   			size = 4;
> -#if defined(RTE_ARCH_X86)
> -			*(uint32_t *)d = inl(reg);
> -#else
> -			*(uint32_t *)d = *(volatile uint32_t *)reg;
> -#endif
> +			*(uint32_t *)d = ioread32((void *)reg);
>   		} else if (len >= 2) {
>   			size = 2;
> -#if defined(RTE_ARCH_X86)
> -			*(uint16_t *)d = inw(reg);
> -#else
> -			*(uint16_t *)d = *(volatile uint16_t *)reg;
> -#endif
> +			*(uint16_t *)d = ioread16((void *)reg);
>   		} else {
>   			size = 1;
> -#if defined(RTE_ARCH_X86)
> -			*d = inb(reg);
> -#else
> -			*d = *(volatile uint8_t *)reg;
> -#endif
> +			*d = ioread8((void *)reg);
>   		}
>   	}
>   }
> @@ -534,25 +609,13 @@
>   	for (s = data; len > 0; s += size, reg += size, len -= size) {
>   		if (len >= 4) {
>   			size = 4;
> -#if defined(RTE_ARCH_X86)
> -			outl_p(*(const uint32_t *)s, reg);
> -#else
> -			*(volatile uint32_t *)reg = *(const uint32_t *)s;
> -#endif
> +			iowrite32(*(const uint32_t *)s, (void *)reg);
>   		} else if (len >= 2) {
>   			size = 2;
> -#if defined(RTE_ARCH_X86)
> -			outw_p(*(const uint16_t *)s, reg);
> -#else
> -			*(volatile uint16_t *)reg = *(const uint16_t *)s;
> -#endif
> +			iowrite16(*(const uint16_t *)s, (void *)reg);
>   		} else {
>   			size = 1;
> -#if defined(RTE_ARCH_X86)
> -			outb_p(*s, reg);
> -#else
> -			*(volatile uint8_t *)reg = *s;
> -#endif
> +			iowrite8(*s, (void *)reg);
>   		}
>   	}
>   }
>
  
谢华伟(此时此刻) Oct. 21, 2020, 12:32 p.m. UTC | #4
On 2020/10/21 19:49, Ferruh Yigit wrote:
> On 10/13/2020 9:41 AM, 谢华伟(此时此刻) wrote:
>> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
>>
>> Legacy virtio-pci only supports PIO BAR resource. As we need to 
>> create lots of
>> virtio devices and PIO resource on x86 is very limited, we expose 
>> MMIO BAR.
>>
>> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. 
>> We handles
>> different type of BAR in the similar way.
>>
>> In previous implementation, with igb_uio we get PIO address from igb_uio
>> sysfs entry; with uio_pci_generic, we get PIO address from
>> /proc/ioports.
>> For PIO/MMIO RW, there is different path for different drivers and arch.
>> For VFIO, PIO/MMIO RW is through syscall, which has big performance
>> issue.
>> On X86, it assumes only PIO is supported.
>>
>> All of the above is too much twisted.
>> This patch unifies the way to get both PIO and MMIO address for 
>> different driver
>> and arch, all from standard resource attr under pci sysfs.
>>
>
> As mentined above this patch does multiple things.
>
> The main target is, as far as I understand, you have a legacy virtio 
> device which supports "memory-mapped I/O" and "port-mapped I/O", but 
> virtio logic forces legacy devices to use the PIO but you want to be 
> able to use the MMIO with this device.
yes.
>
> The solution below is adding MMIO support in the PIO funciton, and 
> distinguish MMIO or PIO based on their address check.
Yes, kernel does this in the similar way.
>
>
> Instead of this, can't this be resolved in the virtio side, like if 
> the legacy device supports MMIO (detect this somehow) use the MMIO 
> istead of hacking PIO mapping to support MMIO?

Get your concern.

1>

If we move, I think we should move all those PCI codes into virtio side, 
not just the mmio part.

Without my patch, those PCI codes are virtio-pci device specific, not 
generic.

With this patch, those pci ioport map/rw code could also be used for 
other devices if they support both PIO and MMIO.

Every option is ok. Hope i make myself clear.

2>  I don't think this is hacking. for rte_pci_ioport_map/read/write, if 
ioport could be both PIO and MMIO, then everything is reasonable.

Take how kernel does port map for example:

     vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);

Here io doesn't mean PIO only. It could also be MMIO. Kernel then uses 
ioread/write to access PIO/MMIO port.

Actually we are pretty much the same in the interface.

I think this patch extends rather then hacks the ioport interface to 
support MMIO.

>
> I have other concerns, specially mergin VFIO mapping too, but lets 
> clarify above first.

vfio doesn't affect other driver but only virtio.

igb_uio, uio_pci_generic and vfio-pci all uses the same way to map/rw 
ioport.

>
> Thanks,
> ferruh
>
>
>
>> We distinguish PIO and MMIO by their address like how kernel does. It 
>> is ugly but works.
>>
>> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
>> ---
>>   drivers/bus/pci/linux/pci.c     |  89 +--------------------
>>   drivers/bus/pci/linux/pci_uio.c | 167 
>> +++++++++++++++++++++++++++-------------
>>   2 files changed, 119 insertions(+), 137 deletions(-)
>>
>> diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
>> index bf27594..885e54e 100644
>> --- a/drivers/bus/pci/linux/pci.c
>> +++ b/drivers/bus/pci/linux/pci.c
>> @@ -687,71 +687,6 @@ int rte_pci_write_config(const struct 
>> rte_pci_device *device,
>>       }
>>   }
>>   -#if defined(RTE_ARCH_X86)
>> -static int
>> -pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
>> -        struct rte_pci_ioport *p)
>> -{
>> -    uint16_t start, end;
>> -    FILE *fp;
>> -    char *line = NULL;
>> -    char pci_id[16];
>> -    int found = 0;
>> -    size_t linesz;
>> -
>> -    if (rte_eal_iopl_init() != 0) {
>> -        RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for 
>> PCI device %s\n",
>> -            __func__, dev->name);
>> -        return -1;
>> -    }
>> -
>> -    snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
>> -         dev->addr.domain, dev->addr.bus,
>> -         dev->addr.devid, dev->addr.function);
>> -
>> -    fp = fopen("/proc/ioports", "r");
>> -    if (fp == NULL) {
>> -        RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
>> -        return -1;
>> -    }
>> -
>> -    while (getdelim(&line, &linesz, '\n', fp) > 0) {
>> -        char *ptr = line;
>> -        char *left;
>> -        int n;
>> -
>> -        n = strcspn(ptr, ":");
>> -        ptr[n] = 0;
>> -        left = &ptr[n + 1];
>> -
>> -        while (*left && isspace(*left))
>> -            left++;
>> -
>> -        if (!strncmp(left, pci_id, strlen(pci_id))) {
>> -            found = 1;
>> -
>> -            while (*ptr && isspace(*ptr))
>> -                ptr++;
>> -
>> -            sscanf(ptr, "%04hx-%04hx", &start, &end);
>> -
>> -            break;
>> -        }
>> -    }
>> -
>> -    free(line);
>> -    fclose(fp);
>> -
>> -    if (!found)
>> -        return -1;
>> -
>> -    p->base = start;
>> -    RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
>> -
>> -    return 0;
>> -}
>> -#endif
>> -
>>   int
>>   rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
>>           struct rte_pci_ioport *p)
>> @@ -762,18 +697,12 @@ int rte_pci_write_config(const struct 
>> rte_pci_device *device,
>>   #ifdef VFIO_PRESENT
>>       case RTE_PCI_KDRV_VFIO:
>>           if (pci_vfio_is_enabled())
>> -            ret = pci_vfio_ioport_map(dev, bar, p);
>> +            ret = pci_uio_ioport_map(dev, bar, p);
>>           break;
>>   #endif
>>       case RTE_PCI_KDRV_IGB_UIO:
>> -        ret = pci_uio_ioport_map(dev, bar, p);
>> -        break;
>>       case RTE_PCI_KDRV_UIO_GENERIC:
>> -#if defined(RTE_ARCH_X86)
>> -        ret = pci_ioport_map(dev, bar, p);
>> -#else
>>           ret = pci_uio_ioport_map(dev, bar, p);
>> -#endif
>>           break;
>>       default:
>>           break;
>> @@ -792,12 +721,10 @@ int rte_pci_write_config(const struct 
>> rte_pci_device *device,
>>       switch (p->dev->kdrv) {
>>   #ifdef VFIO_PRESENT
>>       case RTE_PCI_KDRV_VFIO:
>> -        pci_vfio_ioport_read(p, data, len, offset);
>> +        pci_uio_ioport_read(p, data, len, offset);
>>           break;
>>   #endif
>>       case RTE_PCI_KDRV_IGB_UIO:
>> -        pci_uio_ioport_read(p, data, len, offset);
>> -        break;
>>       case RTE_PCI_KDRV_UIO_GENERIC:
>>           pci_uio_ioport_read(p, data, len, offset);
>>           break;
>> @@ -813,12 +740,10 @@ int rte_pci_write_config(const struct 
>> rte_pci_device *device,
>>       switch (p->dev->kdrv) {
>>   #ifdef VFIO_PRESENT
>>       case RTE_PCI_KDRV_VFIO:
>> -        pci_vfio_ioport_write(p, data, len, offset);
>> +        pci_uio_ioport_write(p, data, len, offset);
>>           break;
>>   #endif
>>       case RTE_PCI_KDRV_IGB_UIO:
>> -        pci_uio_ioport_write(p, data, len, offset);
>> -        break;
>>       case RTE_PCI_KDRV_UIO_GENERIC:
>>           pci_uio_ioport_write(p, data, len, offset);
>>           break;
>> @@ -836,18 +761,12 @@ int rte_pci_write_config(const struct 
>> rte_pci_device *device,
>>   #ifdef VFIO_PRESENT
>>       case RTE_PCI_KDRV_VFIO:
>>           if (pci_vfio_is_enabled())
>> -            ret = pci_vfio_ioport_unmap(p);
>> +            ret = pci_uio_ioport_unmap(p);
>>           break;
>>   #endif
>>       case RTE_PCI_KDRV_IGB_UIO:
>> -        ret = pci_uio_ioport_unmap(p);
>> -        break;
>>       case RTE_PCI_KDRV_UIO_GENERIC:
>> -#if defined(RTE_ARCH_X86)
>> -        ret = 0;
>> -#else
>>           ret = pci_uio_ioport_unmap(p);
>> -#endif
>>           break;
>>       default:
>>           break;
>> diff --git a/drivers/bus/pci/linux/pci_uio.c 
>> b/drivers/bus/pci/linux/pci_uio.c
>> index f3305a2..0062ac0 100644
>> --- a/drivers/bus/pci/linux/pci_uio.c
>> +++ b/drivers/bus/pci/linux/pci_uio.c
>> @@ -22,6 +22,7 @@
>>   #include <rte_bus_pci.h>
>>   #include <rte_common.h>
>>   #include <rte_malloc.h>
>> +#include <rte_bus.h>
>>     #include "eal_filesystem.h"
>>   #include "pci_init.h"
>> @@ -373,52 +374,83 @@
>>   pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
>>              struct rte_pci_ioport *p)
>>   {
>> +    FILE *f = NULL;
>>       char dirname[PATH_MAX];
>>       char filename[PATH_MAX];
>> +    char buf[BUFSIZ];
>> +    uint64_t phys_addr, end_addr, flags;
>>       int uio_num;
>> -    unsigned long start;
>> +    unsigned long base;
>> +    bool iobar;
>> +    int i;
>>   -    if (rte_eal_iopl_init() != 0) {
>> -        RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for 
>> PCI device %s\n",
>> -            __func__, dev->name);
>> +    /* open and read addresses of the corresponding resource in 
>> sysfs */
>> +    snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
>> +        rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
>> +        dev->addr.devid, dev->addr.function);
>> +    f = fopen(filename, "r");
>> +    if (f == NULL) {
>> +        RTE_LOG(ERR, EAL, "Cannot open sysfs resource: %s\n",
>> +            strerror(errno));
>>           return -1;
>>       }
>>   -    uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
>> -    if (uio_num < 0)
>> -        return -1;
>> +    for (i = 0; i < bar + 1; i++) {
>> +        if (fgets(buf, sizeof(buf), f) == NULL) {
>> +            RTE_LOG(ERR, EAL, "Cannot read sysfs resource\n");
>> +            goto error;
>> +        }
>> +    }
>> +    if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
>> +        &end_addr, &flags) < 0)
>> +        goto error;
>>   -    /* get portio start */
>> -    snprintf(filename, sizeof(filename),
>> -         "%s/portio/port%d/start", dirname, bar);
>> -    if (eal_parse_sysfs_value(filename, &start) < 0) {
>> -        RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
>> -            __func__);
>> -        return -1;
>> +    if (flags & IORESOURCE_IO) {
>> +        iobar = 1;
>> +        base = (unsigned long)phys_addr;
>> +        RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", 
>> __func__, base);
>> +    } else if (flags & IORESOURCE_MEM) {
>> +        iobar = 0;
>> +        base = (unsigned long)dev->mem_resource[bar].addr;
>> +        RTE_LOG(INFO, EAL, "%s(): MMIO BAR %08lx detected\n", 
>> __func__, base);
>> +    } else {
>> +        RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
>> +        goto error;
>> +    }
>> +
>> +    if (iobar && rte_eal_iopl_init() != 0) {
>> +        RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for 
>> PCI device %s\n",
>> +            __func__, dev->name);
>> +        goto error;
>>       }
>> -    /* ensure we don't get anything funny here, read/write will cast to
>> -     * uin16_t */
>> -    if (start > UINT16_MAX)
>> -        return -1;
>>         /* FIXME only for primary process ? */
>> -    if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
>> +    if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN &&
>> +        dev->kdrv == RTE_PCI_KDRV_UIO_GENERIC) {
>> +        uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
>> +        if (uio_num < 0)
>> +            goto error;
>>             snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
>>           dev->intr_handle.fd = open(filename, O_RDWR);
>>           if (dev->intr_handle.fd < 0) {
>>               RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
>>                   filename, strerror(errno));
>> -            return -1;
>> +            goto error;
>>           }
>>           dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
>>       }
>>   -    RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", start);
>> +    RTE_LOG(DEBUG, EAL, "PCI IO port found start=0x%lx\n", base);
>>   -    p->base = start;
>> +    p->base = base;
>>       p->len = 0;
>> +    fclose(f);
>>       return 0;
>> +error:
>> +    if (f)
>> +        fclose(f);
>> +    return -1;
>>   }
>>   #else
>>   int
>> @@ -489,6 +521,61 @@
>>   }
>>   #endif
>>   +#define PIO_MAX 0x10000
>> +static inline uint8_t ioread8(void *addr)
>> +{
>> +    uint8_t val;
>> +
>> +    val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>> +        *(volatile uint8_t *)addr :
>> +        inb((unsigned long)addr);
>> +
>> +    return val;
>> +}
>> +
>> +static inline uint16_t ioread16(void *addr)
>> +{
>> +    uint16_t val;
>> +
>> +    val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>> +        *(volatile uint16_t *)addr :
>> +        inw((unsigned long)addr);
>> +
>> +    return val;
>> +}
>> +
>> +static inline uint32_t ioread32(void *addr)
>> +{
>> +    uint32_t val;
>> +
>> +    val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>> +        *(volatile uint32_t *)addr :
>> +    inl((unsigned long)addr);
>> +
>> +    return val;
>> +}
>> +
>> +static inline void iowrite8(uint8_t val, void *addr)
>> +{
>> +    (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>> +        *(volatile uint8_t *)addr = val :
>> +        outb(val, (unsigned long)addr);
>> +}
>> +
>> +static inline void iowrite16(uint16_t val, void *addr)
>> +{
>> +    (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>> +        *(volatile uint16_t *)addr = val :
>> +        outw(val, (unsigned long)addr);
>> +}
>> +
>> +static inline void iowrite32(uint32_t val, void *addr)
>> +{
>> +    (uint64_t)(uintptr_t)addr >= PIO_MAX ?
>> +        *(volatile uint32_t *)addr = val :
>> +        outl(val, (unsigned long)addr);
>> +}
>> +
>>   void
>>   pci_uio_ioport_read(struct rte_pci_ioport *p,
>>               void *data, size_t len, off_t offset)
>> @@ -500,25 +587,13 @@
>>       for (d = data; len > 0; d += size, reg += size, len -= size) {
>>           if (len >= 4) {
>>               size = 4;
>> -#if defined(RTE_ARCH_X86)
>> -            *(uint32_t *)d = inl(reg);
>> -#else
>> -            *(uint32_t *)d = *(volatile uint32_t *)reg;
>> -#endif
>> +            *(uint32_t *)d = ioread32((void *)reg);
>>           } else if (len >= 2) {
>>               size = 2;
>> -#if defined(RTE_ARCH_X86)
>> -            *(uint16_t *)d = inw(reg);
>> -#else
>> -            *(uint16_t *)d = *(volatile uint16_t *)reg;
>> -#endif
>> +            *(uint16_t *)d = ioread16((void *)reg);
>>           } else {
>>               size = 1;
>> -#if defined(RTE_ARCH_X86)
>> -            *d = inb(reg);
>> -#else
>> -            *d = *(volatile uint8_t *)reg;
>> -#endif
>> +            *d = ioread8((void *)reg);
>>           }
>>       }
>>   }
>> @@ -534,25 +609,13 @@
>>       for (s = data; len > 0; s += size, reg += size, len -= size) {
>>           if (len >= 4) {
>>               size = 4;
>> -#if defined(RTE_ARCH_X86)
>> -            outl_p(*(const uint32_t *)s, reg);
>> -#else
>> -            *(volatile uint32_t *)reg = *(const uint32_t *)s;
>> -#endif
>> +            iowrite32(*(const uint32_t *)s, (void *)reg);
>>           } else if (len >= 2) {
>>               size = 2;
>> -#if defined(RTE_ARCH_X86)
>> -            outw_p(*(const uint16_t *)s, reg);
>> -#else
>> -            *(volatile uint16_t *)reg = *(const uint16_t *)s;
>> -#endif
>> +            iowrite16(*(const uint16_t *)s, (void *)reg);
>>           } else {
>>               size = 1;
>> -#if defined(RTE_ARCH_X86)
>> -            outb_p(*s, reg);
>> -#else
>> -            *(volatile uint8_t *)reg = *s;
>> -#endif
>> +            iowrite8(*s, (void *)reg);
>>           }
>>       }
>>   }
>>
  
Ferruh Yigit Oct. 21, 2020, 5:24 p.m. UTC | #5
On 10/21/2020 1:32 PM, 谢华伟(此时此刻) wrote:
> 
> On 2020/10/21 19:49, Ferruh Yigit wrote:
>> On 10/13/2020 9:41 AM, 谢华伟(此时此刻) wrote:
>>> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
>>>
>>> Legacy virtio-pci only supports PIO BAR resource. As we need to create lots of
>>> virtio devices and PIO resource on x86 is very limited, we expose MMIO BAR.
>>>
>>> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. We handles
>>> different type of BAR in the similar way.
>>>
>>> In previous implementation, with igb_uio we get PIO address from igb_uio
>>> sysfs entry; with uio_pci_generic, we get PIO address from
>>> /proc/ioports.
>>> For PIO/MMIO RW, there is different path for different drivers and arch.
>>> For VFIO, PIO/MMIO RW is through syscall, which has big performance
>>> issue.
>>> On X86, it assumes only PIO is supported.
>>>
>>> All of the above is too much twisted.
>>> This patch unifies the way to get both PIO and MMIO address for different driver
>>> and arch, all from standard resource attr under pci sysfs.
>>>
>>
>> As mentined above this patch does multiple things.
>>
>> The main target is, as far as I understand, you have a legacy virtio device 
>> which supports "memory-mapped I/O" and "port-mapped I/O", but virtio logic 
>> forces legacy devices to use the PIO but you want to be able to use the MMIO 
>> with this device.
> yes.
>>
>> The solution below is adding MMIO support in the PIO funciton, and distinguish 
>> MMIO or PIO based on their address check.
> Yes, kernel does this in the similar way.
>>
>>
>> Instead of this, can't this be resolved in the virtio side, like if the legacy 
>> device supports MMIO (detect this somehow) use the MMIO istead of hacking PIO 
>> mapping to support MMIO?
> 
> Get your concern.
> 
> 1>
> 
> If we move, I think we should move all those PCI codes into virtio side, not 
> just the mmio part.
> 
> Without my patch, those PCI codes are virtio-pci device specific, not generic.
> 
> With this patch, those pci ioport map/rw code could also be used for other 
> devices if they support both PIO and MMIO.
> 

I was not suggesting moving any code into virtio, but within 'vtpci_init()' what 
happens when "hw->modern = 1;" is set?
And if this is set for your device, will it work without change?

> Every option is ok. Hope i make myself clear.
> 
> 2>  I don't think this is hacking. for rte_pci_ioport_map/read/write, if ioport 
> could be both PIO and MMIO, then everything is reasonable.
> 
> Take how kernel does port map for example:
> 
>      vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
> 
> Here io doesn't mean PIO only. It could also be MMIO. Kernel then uses 
> ioread/write to access PIO/MMIO port.
> 
> Actually we are pretty much the same in the interface.
> 
> I think this patch extends rather then hacks the ioport interface to support MMIO.
> 
>>
>> I have other concerns, specially mergin VFIO mapping too, but lets clarify 
>> above first.
> 
> vfio doesn't affect other driver but only virtio.
> 

Why it doesn't affect other drivers, can't there be other driver using PIO?

> igb_uio, uio_pci_generic and vfio-pci all uses the same way to map/rw ioport.
> 

For vfio, code changes 'pci_vfio_ioport_read()' to the direct address read, 
first I don't know if this is always safe, and my question why there is a 
syscall introduced at first place if you can read from address directly?

Is your device works as expected when vfio-pci kernel module used? Since it is 
not suffering from PIO limitation, right?


And I wonder if the patch can be done as three patches to simply it, as:
1) Combine 'RTE_PCI_KDRV_IGB_UIO' & 'RTE_PCI_KDRV_UIO_GENERIC' (remove 
pci_ioport_map)
2) Update 'pci_uio_ioport_map()' to add memory map support (and update 
read/write functions according)
3) Combine vfio & uio

>>
>> Thanks,
>> ferruh
>>
>>
>>
>>> We distinguish PIO and MMIO by their address like how kernel does. It is ugly 
>>> but works.
>>>
>>> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>

<...>
  
谢华伟(此时此刻) Oct. 22, 2020, 9:15 a.m. UTC | #6
On 2020/10/22 1:24, Ferruh Yigit wrote:
> On 10/21/2020 1:32 PM, 谢华伟(此时此刻) wrote:
>>
>> On 2020/10/21 19:49, Ferruh Yigit wrote:
>>> On 10/13/2020 9:41 AM, 谢华伟(此时此刻) wrote:
>>>> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
>>>>
>>>> Legacy virtio-pci only supports PIO BAR resource. As we need to 
>>>> create lots of
>>>> virtio devices and PIO resource on x86 is very limited, we expose 
>>>> MMIO BAR.
>>>>
>>>> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci 
>>>> device. We handles
>>>> different type of BAR in the similar way.
>>>>
>>>> In previous implementation, with igb_uio we get PIO address from 
>>>> igb_uio
>>>> sysfs entry; with uio_pci_generic, we get PIO address from
>>>> /proc/ioports.
>>>> For PIO/MMIO RW, there is different path for different drivers and 
>>>> arch.
>>>> For VFIO, PIO/MMIO RW is through syscall, which has big performance
>>>> issue.
>>>> On X86, it assumes only PIO is supported.
>>>>
>>>> All of the above is too much twisted.
>>>> This patch unifies the way to get both PIO and MMIO address for 
>>>> different driver
>>>> and arch, all from standard resource attr under pci sysfs.
>>>>
>>>
>>> As mentined above this patch does multiple things.
>>>
>>> The main target is, as far as I understand, you have a legacy virtio 
>>> device which supports "memory-mapped I/O" and "port-mapped I/O", but 
>>> virtio logic forces legacy devices to use the PIO but you want to be 
>>> able to use the MMIO with this device.
>> yes.
>>>
>>> The solution below is adding MMIO support in the PIO funciton, and 
>>> distinguish MMIO or PIO based on their address check.
>> Yes, kernel does this in the similar way.
>>>
>>>
>>> Instead of this, can't this be resolved in the virtio side, like if 
>>> the legacy device supports MMIO (detect this somehow) use the MMIO 
>>> istead of hacking PIO mapping to support MMIO?
>>
>> Get your concern.
>>
>> 1>
>>
>> If we move, I think we should move all those PCI codes into virtio 
>> side, not just the mmio part.
>>
>> Without my patch, those PCI codes are virtio-pci device specific, not 
>> generic.
>>
>> With this patch, those pci ioport map/rw code could also be used for 
>> other devices if they support both PIO and MMIO.
>>
>
> I was not suggesting moving any code into virtio, but within 
> 'vtpci_init()' what happens when "hw->modern = 1;" is set?
> And if this is set for your device, will it work without change?

Yes, this will only affect legacy_device, which uses legacy_ops to 
access port io.

If is is modern_device, port access will go through modern_ops.

We only change the implementation in legacy_ops.


>
>> Every option is ok. Hope i make myself clear.
>>
>> 2>  I don't think this is hacking. for rte_pci_ioport_map/read/write, 
>> if ioport could be both PIO and MMIO, then everything is reasonable.
>>
>> Take how kernel does port map for example:
>>
>>      vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
>>
>> Here io doesn't mean PIO only. It could also be MMIO. Kernel then 
>> uses ioread/write to access PIO/MMIO port.
>>
>> Actually we are pretty much the same in the interface.
>>
>> I think this patch extends rather then hacks the ioport interface to 
>> support MMIO.
>>
>>>
>>> I have other concerns, specially mergin VFIO mapping too, but lets 
>>> clarify above first.
>>
>> vfio doesn't affect other driver but only virtio.
>>
>
> Why it doesn't affect other drivers, can't there be other driver using 
> PIO?

Currently only virtio-pci uses PIO, and only virtio PMD uses these port 
map/read/write functions.

I don't foresee in future any new device uses PIO.

/huawei

>
>> igb_uio, uio_pci_generic and vfio-pci all uses the same way to map/rw 
>> ioport.
>>
>
> For vfio, code changes 'pci_vfio_ioport_read()' to the direct address 
> read, first I don't know if this is always safe, and my question why 
> there is a syscall introduced at first place if you can read from 
> address directly?

Original vfio way works, but we don't need that syscall. Under whatever 
driver, we could use the simple way as in this patch.

/huawei

>
> Is your device works as expected when vfio-pci kernel module used? 
> Since it is not suffering from PIO limitation, right?

Certainly i tested vfio module. Firstly, i didn't intend to fix vfio 
performance issue, but i heard that igb_uio will be removed.

/huawei

>
>
> And I wonder if the patch can be done as three patches to simply it, as:
> 1) Combine 'RTE_PCI_KDRV_IGB_UIO' & 'RTE_PCI_KDRV_UIO_GENERIC' (remove 
> pci_ioport_map)
> 2) Update 'pci_uio_ioport_map()' to add memory map support (and update 
> read/write functions according)
> 3) Combine vfio & uio
>
Got it. It makes sense to split, but i think this patch is already 
simple enough.

Let me check.

/huawei

>>>
>>> Thanks,
>>> ferruh
>>>
>>>
>>>
>>>> We distinguish PIO and MMIO by their address like how kernel does. 
>>>> It is ugly but works.
>>>>
>>>> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
>
> <...>
  
Ferruh Yigit Oct. 22, 2020, 9:44 a.m. UTC | #7
On 10/22/2020 10:15 AM, 谢华伟(此时此刻) wrote:
> 
> On 2020/10/22 1:24, Ferruh Yigit wrote:
>> On 10/21/2020 1:32 PM, 谢华伟(此时此刻) wrote:
>>>
>>> On 2020/10/21 19:49, Ferruh Yigit wrote:
>>>> On 10/13/2020 9:41 AM, 谢华伟(此时此刻) wrote:
>>>>> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
>>>>>
>>>>> Legacy virtio-pci only supports PIO BAR resource. As we need to create lots of
>>>>> virtio devices and PIO resource on x86 is very limited, we expose MMIO BAR.
>>>>>
>>>>> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci device. We 
>>>>> handles
>>>>> different type of BAR in the similar way.
>>>>>
>>>>> In previous implementation, with igb_uio we get PIO address from igb_uio
>>>>> sysfs entry; with uio_pci_generic, we get PIO address from
>>>>> /proc/ioports.
>>>>> For PIO/MMIO RW, there is different path for different drivers and arch.
>>>>> For VFIO, PIO/MMIO RW is through syscall, which has big performance
>>>>> issue.
>>>>> On X86, it assumes only PIO is supported.
>>>>>
>>>>> All of the above is too much twisted.
>>>>> This patch unifies the way to get both PIO and MMIO address for different 
>>>>> driver
>>>>> and arch, all from standard resource attr under pci sysfs.
>>>>>
>>>>
>>>> As mentined above this patch does multiple things.
>>>>
>>>> The main target is, as far as I understand, you have a legacy virtio device 
>>>> which supports "memory-mapped I/O" and "port-mapped I/O", but virtio logic 
>>>> forces legacy devices to use the PIO but you want to be able to use the MMIO 
>>>> with this device.
>>> yes.
>>>>
>>>> The solution below is adding MMIO support in the PIO funciton, and 
>>>> distinguish MMIO or PIO based on their address check.
>>> Yes, kernel does this in the similar way.
>>>>
>>>>
>>>> Instead of this, can't this be resolved in the virtio side, like if the 
>>>> legacy device supports MMIO (detect this somehow) use the MMIO istead of 
>>>> hacking PIO mapping to support MMIO?
>>>
>>> Get your concern.
>>>
>>> 1>
>>>
>>> If we move, I think we should move all those PCI codes into virtio side, not 
>>> just the mmio part.
>>>
>>> Without my patch, those PCI codes are virtio-pci device specific, not generic.
>>>
>>> With this patch, those pci ioport map/rw code could also be used for other 
>>> devices if they support both PIO and MMIO.
>>>
>>
>> I was not suggesting moving any code into virtio, but within 'vtpci_init()' 
>> what happens when "hw->modern = 1;" is set?
>> And if this is set for your device, will it work without change?
> 
> Yes, this will only affect legacy_device, which uses legacy_ops to access port io.
> 
> If is is modern_device, port access will go through modern_ops.
> 
> We only change the implementation in legacy_ops.
> 

I am saying something else.

When a device is marked as "hw->modern = 1;", it will use MMIO, right?
If, somehow, your device marked as "hw->modern = 1;", will that path work as 
expected for your device?

> 
>>
>>> Every option is ok. Hope i make myself clear.
>>>
>>> 2>  I don't think this is hacking. for rte_pci_ioport_map/read/write, if 
>>> ioport could be both PIO and MMIO, then everything is reasonable.
>>>
>>> Take how kernel does port map for example:
>>>
>>>      vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
>>>
>>> Here io doesn't mean PIO only. It could also be MMIO. Kernel then uses 
>>> ioread/write to access PIO/MMIO port.
>>>
>>> Actually we are pretty much the same in the interface.
>>>
>>> I think this patch extends rather then hacks the ioport interface to support 
>>> MMIO.
>>>
>>>>
>>>> I have other concerns, specially mergin VFIO mapping too, but lets clarify 
>>>> above first.
>>>
>>> vfio doesn't affect other driver but only virtio.
>>>
>>
>> Why it doesn't affect other drivers, can't there be other driver using PIO?
> 
> Currently only virtio-pci uses PIO, and only virtio PMD uses these port 
> map/read/write functions.
> 
> I don't foresee in future any new device uses PIO.
> 

I see but technically there can be other users.

> /huawei
> 
>>
>>> igb_uio, uio_pci_generic and vfio-pci all uses the same way to map/rw ioport.
>>>
>>
>> For vfio, code changes 'pci_vfio_ioport_read()' to the direct address read, 
>> first I don't know if this is always safe, and my question why there is a 
>> syscall introduced at first place if you can read from address directly?
> 
> Original vfio way works, but we don't need that syscall. Under whatever driver, 
> we could use the simple way as in this patch.
> 

If vfio works, you have already a solution, that is good. But I see you are not 
happy with its performance.

> /huawei
> 
>>
>> Is your device works as expected when vfio-pci kernel module used? Since it is 
>> not suffering from PIO limitation, right?
> 
> Certainly i tested vfio module. Firstly, i didn't intend to fix vfio performance 
> issue, but i heard that igb_uio will be removed.
> 

Yes, it will be removed in the long run.

> /huawei
> 
>>
>>
>> And I wonder if the patch can be done as three patches to simply it, as:
>> 1) Combine 'RTE_PCI_KDRV_IGB_UIO' & 'RTE_PCI_KDRV_UIO_GENERIC' (remove 
>> pci_ioport_map)
>> 2) Update 'pci_uio_ioport_map()' to add memory map support (and update 
>> read/write functions according)
>> 3) Combine vfio & uio
>>
> Got it. It makes sense to split, but i think this patch is already simple enough.
> 

The patch is doing many things in one patch, I think it is better to separate 
logically separate issues, although they are simple.

> Let me check.
> 
> /huawei
> 
>>>>
>>>> Thanks,
>>>> ferruh
>>>>
>>>>
>>>>
>>>>> We distinguish PIO and MMIO by their address like how kernel does. It is 
>>>>> ugly but works.
>>>>>
>>>>> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
>>
>> <...>
  
谢华伟(此时此刻) Oct. 22, 2020, 9:57 a.m. UTC | #8
On 2020/10/22 17:44, Ferruh Yigit wrote:
> On 10/22/2020 10:15 AM, 谢华伟(此时此刻) wrote:
>>
>> On 2020/10/22 1:24, Ferruh Yigit wrote:
>>> On 10/21/2020 1:32 PM, 谢华伟(此时此刻) wrote:
>>>>
>>>> On 2020/10/21 19:49, Ferruh Yigit wrote:
>>>>> On 10/13/2020 9:41 AM, 谢华伟(此时此刻) wrote:
>>>>>> From: "huawei.xhw" <huawei.xhw@alibaba-inc.com>
>>>>>>
>>>>>> Legacy virtio-pci only supports PIO BAR resource. As we need to 
>>>>>> create lots of
>>>>>> virtio devices and PIO resource on x86 is very limited, we expose 
>>>>>> MMIO BAR.
>>>>>>
>>>>>> Kernel supports both PIO  and MMIO BAR for legacy virtio-pci 
>>>>>> device. We handles
>>>>>> different type of BAR in the similar way.
>>>>>>
>>>>>> In previous implementation, with igb_uio we get PIO address from 
>>>>>> igb_uio
>>>>>> sysfs entry; with uio_pci_generic, we get PIO address from
>>>>>> /proc/ioports.
>>>>>> For PIO/MMIO RW, there is different path for different drivers 
>>>>>> and arch.
>>>>>> For VFIO, PIO/MMIO RW is through syscall, which has big performance
>>>>>> issue.
>>>>>> On X86, it assumes only PIO is supported.
>>>>>>
>>>>>> All of the above is too much twisted.
>>>>>> This patch unifies the way to get both PIO and MMIO address for 
>>>>>> different driver
>>>>>> and arch, all from standard resource attr under pci sysfs.
>>>>>>
>>>>>
>>>>> As mentined above this patch does multiple things.
>>>>>
>>>>> The main target is, as far as I understand, you have a legacy 
>>>>> virtio device which supports "memory-mapped I/O" and "port-mapped 
>>>>> I/O", but virtio logic forces legacy devices to use the PIO but 
>>>>> you want to be able to use the MMIO with this device.
>>>> yes.
>>>>>
>>>>> The solution below is adding MMIO support in the PIO funciton, and 
>>>>> distinguish MMIO or PIO based on their address check.
>>>> Yes, kernel does this in the similar way.
>>>>>
>>>>>
>>>>> Instead of this, can't this be resolved in the virtio side, like 
>>>>> if the legacy device supports MMIO (detect this somehow) use the 
>>>>> MMIO istead of hacking PIO mapping to support MMIO?
>>>>
>>>> Get your concern.
>>>>
>>>> 1>
>>>>
>>>> If we move, I think we should move all those PCI codes into virtio 
>>>> side, not just the mmio part.
>>>>
>>>> Without my patch, those PCI codes are virtio-pci device specific, 
>>>> not generic.
>>>>
>>>> With this patch, those pci ioport map/rw code could also be used 
>>>> for other devices if they support both PIO and MMIO.
>>>>
>>>
>>> I was not suggesting moving any code into virtio, but within 
>>> 'vtpci_init()' what happens when "hw->modern = 1;" is set?
>>> And if this is set for your device, will it work without change?
>>
>> Yes, this will only affect legacy_device, which uses legacy_ops to 
>> access port io.
>>
>> If is is modern_device, port access will go through modern_ops.
>>
>> We only change the implementation in legacy_ops.
>>
>
> I am saying something else.
>
> When a device is marked as "hw->modern = 1;", it will use MMIO, right?
> If, somehow, your device marked as "hw->modern = 1;", will that path 
> work as expected for your device?

modern device means virtio 1.0 and above. It has different register 
layout, so i couldn't mark legacy virtio device with MMIO as modern to 
make it work.

Is this your question?

/huawei

>
>>
>>>
>>>> Every option is ok. Hope i make myself clear.
>>>>
>>>> 2>  I don't think this is hacking. for 
>>>> rte_pci_ioport_map/read/write, if ioport could be both PIO and 
>>>> MMIO, then everything is reasonable.
>>>>
>>>> Take how kernel does port map for example:
>>>>
>>>>      vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0);
>>>>
>>>> Here io doesn't mean PIO only. It could also be MMIO. Kernel then 
>>>> uses ioread/write to access PIO/MMIO port.
>>>>
>>>> Actually we are pretty much the same in the interface.
>>>>
>>>> I think this patch extends rather then hacks the ioport interface 
>>>> to support MMIO.
>>>>
>>>>>
>>>>> I have other concerns, specially mergin VFIO mapping too, but lets 
>>>>> clarify above first.
>>>>
>>>> vfio doesn't affect other driver but only virtio.
>>>>
>>>
>>> Why it doesn't affect other drivers, can't there be other driver 
>>> using PIO?
>>
>> Currently only virtio-pci uses PIO, and only virtio PMD uses these 
>> port map/read/write functions.
>>
>> I don't foresee in future any new device uses PIO.
>>
>
> I see but technically there can be other users.

If there are other PIO users, what it matters is that we should keep 
these PCI port map/RW functions in pci layer rather than move to virtio PMD.

Our patch only makes things better, as it supports both PIO and MMIO.

>
>> /huawei
>>
>>>
>>>> igb_uio, uio_pci_generic and vfio-pci all uses the same way to 
>>>> map/rw ioport.
>>>>
>>>
>>> For vfio, code changes 'pci_vfio_ioport_read()' to the direct 
>>> address read, first I don't know if this is always safe, and my 
>>> question why there is a syscall introduced at first place if you can 
>>> read from address directly?
>>
>> Original vfio way works, but we don't need that syscall. Under 
>> whatever driver, we could use the simple way as in this patch.
>>
>
> If vfio works, you have already a solution, that is good. But I see 
> you are not happy with its performance.

Different driver could go through the same code path. It doesn't need to 
be that complicated.

Or we can say, this patch solves vfio performance issue in the mean time.

>
>> /huawei
>>
>>>
>>> Is your device works as expected when vfio-pci kernel module used? 
>>> Since it is not suffering from PIO limitation, right?
>>
>> Certainly i tested vfio module. Firstly, i didn't intend to fix vfio 
>> performance issue, but i heard that igb_uio will be removed.
>>
>
> Yes, it will be removed in the long run.
>
>> /huawei
>>
>>>
>>>
>>> And I wonder if the patch can be done as three patches to simply it, 
>>> as:
>>> 1) Combine 'RTE_PCI_KDRV_IGB_UIO' & 'RTE_PCI_KDRV_UIO_GENERIC' 
>>> (remove pci_ioport_map)
>>> 2) Update 'pci_uio_ioport_map()' to add memory map support (and 
>>> update read/write functions according)
>>> 3) Combine vfio & uio
>>>
>> Got it. It makes sense to split, but i think this patch is already 
>> simple enough.
>>
>
> The patch is doing many things in one patch, I think it is better to 
> separate logically separate issues, although they are simple.

Splitting.

>
>> Let me check.
>>
>> /huawei
>>
>>>>>
>>>>> Thanks,
>>>>> ferruh
>>>>>
>>>>>
>>>>>
>>>>>> We distinguish PIO and MMIO by their address like how kernel 
>>>>>> does. It is ugly but works.
>>>>>>
>>>>>> Signed-off-by: huawei.xhw <huawei.xhw@alibaba-inc.com>
>>>
>>> <...>
  

Patch

diff --git a/drivers/bus/pci/linux/pci.c b/drivers/bus/pci/linux/pci.c
index bf27594..885e54e 100644
--- a/drivers/bus/pci/linux/pci.c
+++ b/drivers/bus/pci/linux/pci.c
@@ -687,71 +687,6 @@  int rte_pci_write_config(const struct rte_pci_device *device,
 	}
 }
 
-#if defined(RTE_ARCH_X86)
-static int
-pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
-		struct rte_pci_ioport *p)
-{
-	uint16_t start, end;
-	FILE *fp;
-	char *line = NULL;
-	char pci_id[16];
-	int found = 0;
-	size_t linesz;
-
-	if (rte_eal_iopl_init() != 0) {
-		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
-			__func__, dev->name);
-		return -1;
-	}
-
-	snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
-		 dev->addr.domain, dev->addr.bus,
-		 dev->addr.devid, dev->addr.function);
-
-	fp = fopen("/proc/ioports", "r");
-	if (fp == NULL) {
-		RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
-		return -1;
-	}
-
-	while (getdelim(&line, &linesz, '\n', fp) > 0) {
-		char *ptr = line;
-		char *left;
-		int n;
-
-		n = strcspn(ptr, ":");
-		ptr[n] = 0;
-		left = &ptr[n + 1];
-
-		while (*left && isspace(*left))
-			left++;
-
-		if (!strncmp(left, pci_id, strlen(pci_id))) {
-			found = 1;
-
-			while (*ptr && isspace(*ptr))
-				ptr++;
-
-			sscanf(ptr, "%04hx-%04hx", &start, &end);
-
-			break;
-		}
-	}
-
-	free(line);
-	fclose(fp);
-
-	if (!found)
-		return -1;
-
-	p->base = start;
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
-
-	return 0;
-}
-#endif
-
 int
 rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
 		struct rte_pci_ioport *p)
@@ -762,18 +697,12 @@  int rte_pci_write_config(const struct rte_pci_device *device,
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
 		if (pci_vfio_is_enabled())
-			ret = pci_vfio_ioport_map(dev, bar, p);
+			ret = pci_uio_ioport_map(dev, bar, p);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		ret = pci_uio_ioport_map(dev, bar, p);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
-		ret = pci_ioport_map(dev, bar, p);
-#else
 		ret = pci_uio_ioport_map(dev, bar, p);
-#endif
 		break;
 	default:
 		break;
@@ -792,12 +721,10 @@  int rte_pci_write_config(const struct rte_pci_device *device,
 	switch (p->dev->kdrv) {
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
-		pci_vfio_ioport_read(p, data, len, offset);
+		pci_uio_ioport_read(p, data, len, offset);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		pci_uio_ioport_read(p, data, len, offset);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
 		pci_uio_ioport_read(p, data, len, offset);
 		break;
@@ -813,12 +740,10 @@  int rte_pci_write_config(const struct rte_pci_device *device,
 	switch (p->dev->kdrv) {
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
-		pci_vfio_ioport_write(p, data, len, offset);
+		pci_uio_ioport_write(p, data, len, offset);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		pci_uio_ioport_write(p, data, len, offset);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
 		pci_uio_ioport_write(p, data, len, offset);
 		break;
@@ -836,18 +761,12 @@  int rte_pci_write_config(const struct rte_pci_device *device,
 #ifdef VFIO_PRESENT
 	case RTE_PCI_KDRV_VFIO:
 		if (pci_vfio_is_enabled())
-			ret = pci_vfio_ioport_unmap(p);
+			ret = pci_uio_ioport_unmap(p);
 		break;
 #endif
 	case RTE_PCI_KDRV_IGB_UIO:
-		ret = pci_uio_ioport_unmap(p);
-		break;
 	case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
-		ret = 0;
-#else
 		ret = pci_uio_ioport_unmap(p);
-#endif
 		break;
 	default:
 		break;
diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c
index f3305a2..0062ac0 100644
--- a/drivers/bus/pci/linux/pci_uio.c
+++ b/drivers/bus/pci/linux/pci_uio.c
@@ -22,6 +22,7 @@ 
 #include <rte_bus_pci.h>
 #include <rte_common.h>
 #include <rte_malloc.h>
+#include <rte_bus.h>
 
 #include "eal_filesystem.h"
 #include "pci_init.h"
@@ -373,52 +374,83 @@ 
 pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
 		   struct rte_pci_ioport *p)
 {
+	FILE *f = NULL;
 	char dirname[PATH_MAX];
 	char filename[PATH_MAX];
+	char buf[BUFSIZ];
+	uint64_t phys_addr, end_addr, flags;
 	int uio_num;
-	unsigned long start;
+	unsigned long base;
+	bool iobar;
+	int i;
 
-	if (rte_eal_iopl_init() != 0) {
-		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
-			__func__, dev->name);
+	/* open and read addresses of the corresponding resource in sysfs */
+	snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
+		rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
+		dev->addr.devid, dev->addr.function);
+	f = fopen(filename, "r");
+	if (f == NULL) {
+		RTE_LOG(ERR, EAL, "Cannot open sysfs resource: %s\n",
+			strerror(errno));
 		return -1;
 	}
 
-	uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
-	if (uio_num < 0)
-		return -1;
+	for (i = 0; i < bar + 1; i++) {
+		if (fgets(buf, sizeof(buf), f) == NULL) {
+			RTE_LOG(ERR, EAL, "Cannot read sysfs resource\n");
+			goto error;
+		}
+	}
+	if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
+		&end_addr, &flags) < 0)
+		goto error;
 
-	/* get portio start */
-	snprintf(filename, sizeof(filename),
-		 "%s/portio/port%d/start", dirname, bar);
-	if (eal_parse_sysfs_value(filename, &start) < 0) {
-		RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
-			__func__);
-		return -1;
+	if (flags & IORESOURCE_IO) {
+		iobar = 1;
+		base = (unsigned long)phys_addr;
+		RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
+	} else if (flags & IORESOURCE_MEM) {
+		iobar = 0;
+		base = (unsigned long)dev->mem_resource[bar].addr;
+		RTE_LOG(INFO, EAL, "%s(): MMIO BAR %08lx detected\n", __func__, base);
+	} else {
+		RTE_LOG(ERR, EAL, "%s(): unknown BAR type\n", __func__);
+		goto error;
+	}
+
+	if (iobar && rte_eal_iopl_init() != 0) {
+		RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
+			__func__, dev->name);
+		goto error;
 	}
-	/* ensure we don't get anything funny here, read/write will cast to
-	 * uin16_t */
-	if (start > UINT16_MAX)
-		return -1;
 
 	/* FIXME only for primary process ? */
-	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
+	if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN &&
+	    dev->kdrv == RTE_PCI_KDRV_UIO_GENERIC) {
+		uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
+		if (uio_num < 0)
+			goto error;
 
 		snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
 		dev->intr_handle.fd = open(filename, O_RDWR);
 		if (dev->intr_handle.fd < 0) {
 			RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
 				filename, strerror(errno));
-			return -1;
+			goto error;
 		}
 		dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
 	}
 
-	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", start);
+	RTE_LOG(DEBUG, EAL, "PCI IO port found start=0x%lx\n", base);
 
-	p->base = start;
+	p->base = base;
 	p->len = 0;
+	fclose(f);
 	return 0;
+error:
+	if (f)
+		fclose(f);
+	return -1;
 }
 #else
 int
@@ -489,6 +521,61 @@ 
 }
 #endif
 
+#define PIO_MAX 0x10000
+static inline uint8_t ioread8(void *addr)
+{
+	uint8_t val;
+
+	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint8_t *)addr :
+		inb((unsigned long)addr);
+
+	return val;
+}
+
+static inline uint16_t ioread16(void *addr)
+{
+	uint16_t val;
+
+	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint16_t *)addr :
+		inw((unsigned long)addr);
+
+	return val;
+}
+
+static inline uint32_t ioread32(void *addr)
+{
+	uint32_t val;
+
+	val = (uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint32_t *)addr :
+	inl((unsigned long)addr);
+
+	return val;
+}
+
+static inline void iowrite8(uint8_t val, void *addr)
+{
+	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint8_t *)addr = val :
+		outb(val, (unsigned long)addr);
+}
+
+static inline void iowrite16(uint16_t val, void *addr)
+{
+	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint16_t *)addr = val :
+		outw(val, (unsigned long)addr);
+}
+
+static inline void iowrite32(uint32_t val, void *addr)
+{
+	(uint64_t)(uintptr_t)addr >= PIO_MAX ?
+		*(volatile uint32_t *)addr = val :
+		outl(val, (unsigned long)addr);
+}
+
 void
 pci_uio_ioport_read(struct rte_pci_ioport *p,
 		    void *data, size_t len, off_t offset)
@@ -500,25 +587,13 @@ 
 	for (d = data; len > 0; d += size, reg += size, len -= size) {
 		if (len >= 4) {
 			size = 4;
-#if defined(RTE_ARCH_X86)
-			*(uint32_t *)d = inl(reg);
-#else
-			*(uint32_t *)d = *(volatile uint32_t *)reg;
-#endif
+			*(uint32_t *)d = ioread32((void *)reg);
 		} else if (len >= 2) {
 			size = 2;
-#if defined(RTE_ARCH_X86)
-			*(uint16_t *)d = inw(reg);
-#else
-			*(uint16_t *)d = *(volatile uint16_t *)reg;
-#endif
+			*(uint16_t *)d = ioread16((void *)reg);
 		} else {
 			size = 1;
-#if defined(RTE_ARCH_X86)
-			*d = inb(reg);
-#else
-			*d = *(volatile uint8_t *)reg;
-#endif
+			*d = ioread8((void *)reg);
 		}
 	}
 }
@@ -534,25 +609,13 @@ 
 	for (s = data; len > 0; s += size, reg += size, len -= size) {
 		if (len >= 4) {
 			size = 4;
-#if defined(RTE_ARCH_X86)
-			outl_p(*(const uint32_t *)s, reg);
-#else
-			*(volatile uint32_t *)reg = *(const uint32_t *)s;
-#endif
+			iowrite32(*(const uint32_t *)s, (void *)reg);
 		} else if (len >= 2) {
 			size = 2;
-#if defined(RTE_ARCH_X86)
-			outw_p(*(const uint16_t *)s, reg);
-#else
-			*(volatile uint16_t *)reg = *(const uint16_t *)s;
-#endif
+			iowrite16(*(const uint16_t *)s, (void *)reg);
 		} else {
 			size = 1;
-#if defined(RTE_ARCH_X86)
-			outb_p(*s, reg);
-#else
-			*(volatile uint8_t *)reg = *s;
-#endif
+			iowrite8(*s, (void *)reg);
 		}
 	}
 }