[1/6] dma/skeleton: use rte thread API
Checks
Commit Message
Update driver to use rte thread API where available instead of pthread
as a prerequisite to removing pthread stubs on Windows.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
---
drivers/dma/skeleton/skeleton_dmadev.c | 15 ++++++++-------
drivers/dma/skeleton/skeleton_dmadev.h | 4 ++--
2 files changed, 10 insertions(+), 9 deletions(-)
Comments
On Fri, Mar 17, 2023 at 03:34:15PM -0700, Tyler Retzlaff wrote:
> Update driver to use rte thread API where available instead of pthread
> as a prerequisite to removing pthread stubs on Windows.
>
> Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
> ---
> drivers/dma/skeleton/skeleton_dmadev.c | 15 ++++++++-------
> drivers/dma/skeleton/skeleton_dmadev.h | 4 ++--
> 2 files changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/dma/skeleton/skeleton_dmadev.c b/drivers/dma/skeleton/skeleton_dmadev.c
> index daf35ec..2ec10db 100644
> --- a/drivers/dma/skeleton/skeleton_dmadev.c
> +++ b/drivers/dma/skeleton/skeleton_dmadev.c
> @@ -5,6 +5,8 @@
> #include <inttypes.h>
> #include <stdlib.h>
>
> +#include <pthread.h>
> +
Curious as to why this is needed here. Does rte_thread.h not include all
needed threading dependencies?
[Self-answer] I assume this is for pthread_cancel below, right?
> #include <bus_vdev_driver.h>
> #include <rte_cycles.h>
> #include <rte_eal.h>
> @@ -53,7 +55,7 @@
> return 0;
> }
>
> -static void *
> +static uint32_t
> cpucopy_thread(void *param)
> {
> #define SLEEP_THRESHOLD 10000
> @@ -81,7 +83,7 @@
> (void)rte_ring_enqueue(hw->desc_completed, (void *)desc);
> }
>
> - return NULL;
> + return 0;
> }
>
> static void
> @@ -126,7 +128,7 @@
> rte_mb();
>
> snprintf(name, sizeof(name), "dma_skel_%d", dev->data->dev_id);
> - ret = rte_ctrl_thread_create(&hw->thread, name, NULL,
> + ret = rte_thread_create_control(&hw->thread, name, NULL,
> cpucopy_thread, dev);
> if (ret) {
> SKELDMA_LOG(ERR, "Start cpucopy thread fail!");
> @@ -135,8 +137,7 @@
>
> if (hw->lcore_id != -1) {
> cpuset = rte_lcore_cpuset(hw->lcore_id);
> - ret = pthread_setaffinity_np(hw->thread, sizeof(cpuset),
> - &cpuset);
> + ret = rte_thread_get_affinity_by_id(hw->thread, &cpuset);
> if (ret)
> SKELDMA_LOG(WARNING,
> "Set thread affinity lcore = %d fail!",
> @@ -154,8 +155,8 @@
> hw->exit_flag = true;
> rte_delay_ms(1);
>
> - (void)pthread_cancel(hw->thread);
> - pthread_join(hw->thread, NULL);
> + (void)pthread_cancel((pthread_t)hw->thread.opaque_id);
> + rte_thread_join(hw->thread, NULL);
>
Is there no rte_* equivalent to pthread_cancel? Will that cause issues
later?
> return 0;
> }
> diff --git a/drivers/dma/skeleton/skeleton_dmadev.h b/drivers/dma/skeleton/skeleton_dmadev.h
> index 6f89400..8670a68 100644
> --- a/drivers/dma/skeleton/skeleton_dmadev.h
> +++ b/drivers/dma/skeleton/skeleton_dmadev.h
> @@ -5,9 +5,9 @@
> #ifndef SKELETON_DMADEV_H
> #define SKELETON_DMADEV_H
>
> -#include <pthread.h>
>
> #include <rte_ring.h>
> +#include <rte_thread.h>
>
> #define SKELDMA_ARG_LCORE "lcore"
>
> @@ -21,7 +21,7 @@ struct skeldma_desc {
> struct skeldma_hw {
> int lcore_id; /* cpucopy task affinity core */
> int socket_id;
> - pthread_t thread; /* cpucopy task thread */
> + rte_thread_t thread; /* cpucopy task thread */
> volatile int exit_flag; /* cpucopy task exit flag */
>
> struct skeldma_desc *desc_mem;
> --
> 1.8.3.1
>
On Tue, Apr 18, 2023 at 10:19:15AM +0100, Bruce Richardson wrote:
> On Fri, Mar 17, 2023 at 03:34:15PM -0700, Tyler Retzlaff wrote:
> > Update driver to use rte thread API where available instead of pthread
> > as a prerequisite to removing pthread stubs on Windows.
> >
> > Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
> > ---
> > drivers/dma/skeleton/skeleton_dmadev.c | 15 ++++++++-------
> > drivers/dma/skeleton/skeleton_dmadev.h | 4 ++--
> > 2 files changed, 10 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/dma/skeleton/skeleton_dmadev.c b/drivers/dma/skeleton/skeleton_dmadev.c
> > index daf35ec..2ec10db 100644
> > --- a/drivers/dma/skeleton/skeleton_dmadev.c
> > +++ b/drivers/dma/skeleton/skeleton_dmadev.c
> > @@ -5,6 +5,8 @@
> > #include <inttypes.h>
> > #include <stdlib.h>
> >
> > +#include <pthread.h>
> > +
>
> Curious as to why this is needed here. Does rte_thread.h not include all
> needed threading dependencies?
> [Self-answer] I assume this is for pthread_cancel below, right?
yes, pthread_cancel has no equivalent in the EAL. windows can't easily
provide anything that would behave the same, but pthread_cancel is kind
of awful anyway.
it's something that i'm thinking about but haven't got a good solution
for. so for now any code that uses it remains.
>
>
> > #include <bus_vdev_driver.h>
> > #include <rte_cycles.h>
> > #include <rte_eal.h>
> > @@ -53,7 +55,7 @@
> > return 0;
> > }
> >
> > -static void *
> > +static uint32_t
> > cpucopy_thread(void *param)
> > {
> > #define SLEEP_THRESHOLD 10000
> > @@ -81,7 +83,7 @@
> > (void)rte_ring_enqueue(hw->desc_completed, (void *)desc);
> > }
> >
> > - return NULL;
> > + return 0;
> > }
> >
> > static void
> > @@ -126,7 +128,7 @@
> > rte_mb();
> >
> > snprintf(name, sizeof(name), "dma_skel_%d", dev->data->dev_id);
> > - ret = rte_ctrl_thread_create(&hw->thread, name, NULL,
> > + ret = rte_thread_create_control(&hw->thread, name, NULL,
> > cpucopy_thread, dev);
> > if (ret) {
> > SKELDMA_LOG(ERR, "Start cpucopy thread fail!");
> > @@ -135,8 +137,7 @@
> >
> > if (hw->lcore_id != -1) {
> > cpuset = rte_lcore_cpuset(hw->lcore_id);
> > - ret = pthread_setaffinity_np(hw->thread, sizeof(cpuset),
> > - &cpuset);
> > + ret = rte_thread_get_affinity_by_id(hw->thread, &cpuset);
> > if (ret)
> > SKELDMA_LOG(WARNING,
> > "Set thread affinity lcore = %d fail!",
> > @@ -154,8 +155,8 @@
> > hw->exit_flag = true;
> > rte_delay_ms(1);
> >
> > - (void)pthread_cancel(hw->thread);
> > - pthread_join(hw->thread, NULL);
> > + (void)pthread_cancel((pthread_t)hw->thread.opaque_id);
> > + rte_thread_join(hw->thread, NULL);
> >
>
> Is there no rte_* equivalent to pthread_cancel? Will that cause issues
> later?
there isn't because windows can't really do what it is doing sensibly.
in part it's because of how it is influences how other posix calls
behave.
>
> > return 0;
> > }
> > diff --git a/drivers/dma/skeleton/skeleton_dmadev.h b/drivers/dma/skeleton/skeleton_dmadev.h
> > index 6f89400..8670a68 100644
> > --- a/drivers/dma/skeleton/skeleton_dmadev.h
> > +++ b/drivers/dma/skeleton/skeleton_dmadev.h
> > @@ -5,9 +5,9 @@
> > #ifndef SKELETON_DMADEV_H
> > #define SKELETON_DMADEV_H
> >
> > -#include <pthread.h>
> >
> > #include <rte_ring.h>
> > +#include <rte_thread.h>
> >
> > #define SKELDMA_ARG_LCORE "lcore"
> >
> > @@ -21,7 +21,7 @@ struct skeldma_desc {
> > struct skeldma_hw {
> > int lcore_id; /* cpucopy task affinity core */
> > int socket_id;
> > - pthread_t thread; /* cpucopy task thread */
> > + rte_thread_t thread; /* cpucopy task thread */
> > volatile int exit_flag; /* cpucopy task exit flag */
> >
> > struct skeldma_desc *desc_mem;
> > --
> > 1.8.3.1
> >
@@ -5,6 +5,8 @@
#include <inttypes.h>
#include <stdlib.h>
+#include <pthread.h>
+
#include <bus_vdev_driver.h>
#include <rte_cycles.h>
#include <rte_eal.h>
@@ -53,7 +55,7 @@
return 0;
}
-static void *
+static uint32_t
cpucopy_thread(void *param)
{
#define SLEEP_THRESHOLD 10000
@@ -81,7 +83,7 @@
(void)rte_ring_enqueue(hw->desc_completed, (void *)desc);
}
- return NULL;
+ return 0;
}
static void
@@ -126,7 +128,7 @@
rte_mb();
snprintf(name, sizeof(name), "dma_skel_%d", dev->data->dev_id);
- ret = rte_ctrl_thread_create(&hw->thread, name, NULL,
+ ret = rte_thread_create_control(&hw->thread, name, NULL,
cpucopy_thread, dev);
if (ret) {
SKELDMA_LOG(ERR, "Start cpucopy thread fail!");
@@ -135,8 +137,7 @@
if (hw->lcore_id != -1) {
cpuset = rte_lcore_cpuset(hw->lcore_id);
- ret = pthread_setaffinity_np(hw->thread, sizeof(cpuset),
- &cpuset);
+ ret = rte_thread_get_affinity_by_id(hw->thread, &cpuset);
if (ret)
SKELDMA_LOG(WARNING,
"Set thread affinity lcore = %d fail!",
@@ -154,8 +155,8 @@
hw->exit_flag = true;
rte_delay_ms(1);
- (void)pthread_cancel(hw->thread);
- pthread_join(hw->thread, NULL);
+ (void)pthread_cancel((pthread_t)hw->thread.opaque_id);
+ rte_thread_join(hw->thread, NULL);
return 0;
}
@@ -5,9 +5,9 @@
#ifndef SKELETON_DMADEV_H
#define SKELETON_DMADEV_H
-#include <pthread.h>
#include <rte_ring.h>
+#include <rte_thread.h>
#define SKELDMA_ARG_LCORE "lcore"
@@ -21,7 +21,7 @@ struct skeldma_desc {
struct skeldma_hw {
int lcore_id; /* cpucopy task affinity core */
int socket_id;
- pthread_t thread; /* cpucopy task thread */
+ rte_thread_t thread; /* cpucopy task thread */
volatile int exit_flag; /* cpucopy task exit flag */
struct skeldma_desc *desc_mem;