[5/8] common/cnxk: always use single qint with NIX
Checks
Commit Message
From: Harman Kalra <hkalra@marvell.com>
An errata exists whereby, in certain cases NIX may use an
incorrect QINT_IDX for SQ interrupts. As a result, the
interrupt may not be delivered to software, or may not be
associated with the correct SQ.
When NIX uses an incorrect QINT_IDX :
1. NIX_LF_QINT(0..63)_CNT[COUNT] will be incremented for
incorrect QINT.
2. NIX_LF_QINT(0..63)_INT[INTR] will be set for incorrect
QINT.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
---
drivers/common/cnxk/roc_nix_queue.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
Comments
On Thu, Dec 9, 2021 at 2:44 PM Nithin Dabilpuram
<ndabilpuram@marvell.com> wrote:
>
> From: Harman Kalra <hkalra@marvell.com>
>
> An errata exists whereby, in certain cases NIX may use an
> incorrect QINT_IDX for SQ interrupts. As a result, the
> interrupt may not be delivered to software, or may not be
> associated with the correct SQ.
> When NIX uses an incorrect QINT_IDX :
> 1. NIX_LF_QINT(0..63)_CNT[COUNT] will be incremented for
> incorrect QINT.
> 2. NIX_LF_QINT(0..63)_INT[INTR] will be set for incorrect
> QINT.
>
> Signed-off-by: Harman Kalra <hkalra@marvell.com>
Changed the subject to;
common/cnxk: always use single interrupt ID with NIX
Acked-by: Jerin Jacob <jerinj@marvell.com>
Applied to dpdk-next-net-mrvl/for-next-net. Thanks
> ---
> drivers/common/cnxk/roc_nix_queue.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/common/cnxk/roc_nix_queue.c b/drivers/common/cnxk/roc_nix_queue.c
> index c8c8401..4455fc1 100644
> --- a/drivers/common/cnxk/roc_nix_queue.c
> +++ b/drivers/common/cnxk/roc_nix_queue.c
> @@ -680,7 +680,11 @@ sq_cn9k_init(struct nix *nix, struct roc_nix_sq *sq, uint32_t rr_quantum,
> aq->sq.sq_int_ena |= BIT(NIX_SQINT_MNQ_ERR);
>
> /* Many to one reduction */
> - aq->sq.qint_idx = sq->qid % nix->qints;
> + /* Assigning QINT 0 to all the SQs, an errata exists where NIXTX can
> + * send incorrect QINT_IDX when reporting queue interrupt (QINT). This
> + * might result in software missing the interrupt.
> + */
> + aq->sq.qint_idx = 0;
> }
>
> static int
> @@ -779,8 +783,11 @@ sq_init(struct nix *nix, struct roc_nix_sq *sq, uint32_t rr_quantum,
> aq->sq.sq_int_ena |= BIT(NIX_SQINT_SEND_ERR);
> aq->sq.sq_int_ena |= BIT(NIX_SQINT_MNQ_ERR);
>
> - /* Many to one reduction */
> - aq->sq.qint_idx = sq->qid % nix->qints;
> + /* Assigning QINT 0 to all the SQs, an errata exists where NIXTX can
> + * send incorrect QINT_IDX when reporting queue interrupt (QINT). This
> + * might result in software missing the interrupt.
> + */
> + aq->sq.qint_idx = 0;
> }
>
> static int
> --
> 2.8.4
>
@@ -680,7 +680,11 @@ sq_cn9k_init(struct nix *nix, struct roc_nix_sq *sq, uint32_t rr_quantum,
aq->sq.sq_int_ena |= BIT(NIX_SQINT_MNQ_ERR);
/* Many to one reduction */
- aq->sq.qint_idx = sq->qid % nix->qints;
+ /* Assigning QINT 0 to all the SQs, an errata exists where NIXTX can
+ * send incorrect QINT_IDX when reporting queue interrupt (QINT). This
+ * might result in software missing the interrupt.
+ */
+ aq->sq.qint_idx = 0;
}
static int
@@ -779,8 +783,11 @@ sq_init(struct nix *nix, struct roc_nix_sq *sq, uint32_t rr_quantum,
aq->sq.sq_int_ena |= BIT(NIX_SQINT_SEND_ERR);
aq->sq.sq_int_ena |= BIT(NIX_SQINT_MNQ_ERR);
- /* Many to one reduction */
- aq->sq.qint_idx = sq->qid % nix->qints;
+ /* Assigning QINT 0 to all the SQs, an errata exists where NIXTX can
+ * send incorrect QINT_IDX when reporting queue interrupt (QINT). This
+ * might result in software missing the interrupt.
+ */
+ aq->sq.qint_idx = 0;
}
static int