diff mbox series

[v5,1/1] app/testpmd: support different input color method

Message ID 20220623125701.1136065-1-skori@marvell.com (mailing list archive)
State Accepted
Delegated to: Andrew Rybchenko
Headers show
Series [v5,1/1] app/testpmd: support different input color method | expand

Checks

Context Check Description
ci/iol-x86_64-unit-testing success Testing PASS
ci/iol-x86_64-compile-testing success Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/iol-aarch64-compile-testing success Testing PASS
ci/iol-intel-Functional success Functional Testing PASS
ci/iol-aarch64-unit-testing success Testing PASS
ci/github-robot: build success github build: passed
ci/intel-Testing success Testing PASS
ci/Intel-compilation success Compilation OK
ci/checkpatch warning coding style issues

Commit Message

Sunil Kumar Kori June 23, 2022, 12:57 p.m. UTC
From: Sunil Kumar Kori <skori@marvell.com>

To enable input coloring, based on VLAN or DSCP, patch adds
command line interface to configure the following:

 - configuring input coloring using VLAN or DSCP while creating
   meter i.e. during rte_mtr_create()

 - Update VLAN input coloring table at runtime.

 - configures protocol priorities.

 - retrieve protocol and priority information

Depends-on: patch-22751 ("ethdev: mtr: support protocol based input color selection")

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
---
v4..v5:
 - Update testpmd user guide.

v3..v4:
 - Replace strcmp with strcasecmp whereever is needed.
 
v2..v3:
 - Rebased to branch ToT dpdk-next-net/main
 - Fix static keyword for newly added token parsing symbols

v1..v2:
 - Rebased to branch dpdk-next-net
 - add CLIs for input coloring mechanism

 app/test-pmd/cmdline.c                      |   4 +
 app/test-pmd/cmdline_mtr.c                  | 552 +++++++++++++++++++-
 app/test-pmd/cmdline_mtr.h                  |   4 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  35 +-
 4 files changed, 587 insertions(+), 8 deletions(-)

Comments

Sunil Kumar Kori June 23, 2022, 1:07 p.m. UTC | #1
@Andrew Rybchenko
Please look into it. Updated user guide as suggested.

Regards
Sunil Kumar Kori

> -----Original Message-----
> From: skori@marvell.com <skori@marvell.com>
> Sent: Thursday, June 23, 2022 6:27 PM
> To: Xiaoyun Li <xiaoyun.li@intel.com>; Aman Singh
> <aman.deep.singh@intel.com>; Yuying Zhang <yuying.zhang@intel.com>;
> Cristian Dumitrescu <cristian.dumitrescu@intel.com>
> Cc: dev@dpdk.org; Sunil Kumar Kori <skori@marvell.com>
> Subject: [PATCH v5 1/1] app/testpmd: support different input color method
> 
> From: Sunil Kumar Kori <skori@marvell.com>
> 
> To enable input coloring, based on VLAN or DSCP, patch adds command line
> interface to configure the following:
> 
>  - configuring input coloring using VLAN or DSCP while creating
>    meter i.e. during rte_mtr_create()
> 
>  - Update VLAN input coloring table at runtime.
> 
>  - configures protocol priorities.
> 
>  - retrieve protocol and priority information
> 
> Depends-on: patch-22751 ("ethdev: mtr: support protocol based input color
> selection")
> 
> Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
> ---
> v4..v5:
>  - Update testpmd user guide.
> 
> v3..v4:
>  - Replace strcmp with strcasecmp whereever is needed.
> 
> v2..v3:
>  - Rebased to branch ToT dpdk-next-net/main
>  - Fix static keyword for newly added token parsing symbols
> 
> v1..v2:
>  - Rebased to branch dpdk-next-net
>  - add CLIs for input coloring mechanism
> 
>  app/test-pmd/cmdline.c                      |   4 +
>  app/test-pmd/cmdline_mtr.c                  | 552 +++++++++++++++++++-
>  app/test-pmd/cmdline_mtr.h                  |   4 +
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  35 +-
>  4 files changed, 587 insertions(+), 8 deletions(-)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c index
> 9a7fd5fc35..ded7dfe656 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -14345,6 +14345,10 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
>  	(cmdline_parse_inst_t *)&cmd_del_port_meter_policy,
>  	(cmdline_parse_inst_t *)&cmd_set_port_meter_profile,
>  	(cmdline_parse_inst_t *)&cmd_set_port_meter_dscp_table,
> +	(cmdline_parse_inst_t *)&cmd_set_port_meter_vlan_table,
> +	(cmdline_parse_inst_t *)&cmd_set_port_meter_in_proto,
> +	(cmdline_parse_inst_t *)&cmd_get_port_meter_in_proto,
> +	(cmdline_parse_inst_t *)&cmd_get_port_meter_in_proto_prio,
>  	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
>  	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
>  	(cmdline_parse_inst_t *)&cmd_mcast_addr, diff --git a/app/test-
> pmd/cmdline_mtr.c b/app/test-pmd/cmdline_mtr.c index
> 57050ec9af..b92e66cedb 100644
> --- a/app/test-pmd/cmdline_mtr.c
> +++ b/app/test-pmd/cmdline_mtr.c
> @@ -14,6 +14,7 @@
>  #include "cmdline_mtr.h"
> 
>  #define PARSE_DELIMITER				" \f\n\r\t\v"
> +#define MAX_VLAN_TABLE_ENTRIES		16
>  #define MAX_DSCP_TABLE_ENTRIES		64
> 
>  /** Display Meter Error Message */
> @@ -82,6 +83,122 @@ parse_uint(uint64_t *value, const char *str)
>  	return 0;
>  }
> 
> +static int
> +parse_input_color_table_entries(char *str, enum rte_color **dscp_table,
> +	enum rte_color **vlan_table)
> +{
> +	enum rte_color *vlan, *dscp;
> +	char *token;
> +	int i = 0;
> +
> +	token = strtok_r(str, PARSE_DELIMITER, &str);
> +	if (token == NULL)
> +		return 0;
> +
> +	/* Allocate memory for dscp table */
> +	dscp = (enum rte_color *)malloc(MAX_DSCP_TABLE_ENTRIES *
> +		sizeof(enum rte_color));
> +	if (dscp == NULL)
> +		return -1;
> +
> +	while (1) {
> +		if (strcasecmp(token, "G") == 0)
> +			dscp[i++] = RTE_COLOR_GREEN;
> +		else if (strcasecmp(token, "Y") == 0)
> +			dscp[i++] = RTE_COLOR_YELLOW;
> +		else if (strcasecmp(token, "R") == 0)
> +			dscp[i++] = RTE_COLOR_RED;
> +		else {
> +			free(dscp);
> +			return -1;
> +		}
> +		if (i == MAX_DSCP_TABLE_ENTRIES)
> +			break;
> +
> +		token = strtok_r(str, PARSE_DELIMITER, &str);
> +		if (token == NULL) {
> +			free(dscp);
> +			return -1;
> +		}
> +	}
> +
> +	*dscp_table = dscp;
> +
> +	token = strtok_r(str, PARSE_DELIMITER, &str);
> +	if (token == NULL)
> +		return 0;
> +
> +	/* Allocate memory for vlan table */
> +	vlan = (enum rte_color *)malloc(MAX_VLAN_TABLE_ENTRIES *
> +		sizeof(enum rte_color));
> +	if (vlan == NULL)
> +		return -1;
> +
> +	i = 0;
> +	while (1) {
> +		if (strcasecmp(token, "G") == 0)
> +			vlan[i++] = RTE_COLOR_GREEN;
> +		else if (strcasecmp(token, "Y") == 0)
> +			vlan[i++] = RTE_COLOR_YELLOW;
> +		else if (strcasecmp(token, "R") == 0)
> +			vlan[i++] = RTE_COLOR_RED;
> +		else {
> +			free(vlan);
> +			return -1;
> +		}
> +		if (i == MAX_VLAN_TABLE_ENTRIES)
> +			break;
> +
> +		token = strtok_r(str, PARSE_DELIMITER, &str);
> +		if (token == NULL) {
> +			free(vlan);
> +			return -1;
> +		}
> +	}
> +
> +	*vlan_table = vlan;
> +	return 0;
> +}
> +
> +static int
> +parse_vlan_table_entries(char *str, enum rte_color **vlan_table) {
> +	char *token;
> +	int i = 0;
> +
> +	token = strtok_r(str, PARSE_DELIMITER, &str);
> +	if (token == NULL)
> +		return 0;
> +
> +	/* Allocate memory for vlan table */
> +	*vlan_table = (enum rte_color *)malloc(MAX_VLAN_TABLE_ENTRIES
> *
> +		sizeof(enum rte_color));
> +	if (*vlan_table == NULL)
> +		return -1;
> +
> +	while (1) {
> +		if (strcasecmp(token, "G") == 0)
> +			(*vlan_table)[i++] = RTE_COLOR_GREEN;
> +		else if (strcasecmp(token, "Y") == 0)
> +			(*vlan_table)[i++] = RTE_COLOR_YELLOW;
> +		else if (strcasecmp(token, "R") == 0)
> +			(*vlan_table)[i++] = RTE_COLOR_RED;
> +		else {
> +			free(*vlan_table);
> +			return -1;
> +		}
> +		if (i == MAX_VLAN_TABLE_ENTRIES)
> +			break;
> +
> +		token = strtok_r(str, PARSE_DELIMITER, &str);
> +		if (token == NULL) {
> +			free(*vlan_table);
> +			return -1;
> +		}
> +	}
> +	return 0;
> +}
> +
>  static int
>  parse_dscp_table_entries(char *str, enum rte_color **dscp_table)  { @@ -
> 124,9 +241,30 @@ parse_dscp_table_entries(char *str, enum rte_color
> **dscp_table)
>  	return 0;
>  }
> 
> +static int
> +parse_default_input_color_str(char *str, uint64_t *def_inp_color) {
> +	char *token;
> +
> +	token = strtok_r(str, PARSE_DELIMITER, &str);
> +	if (token == NULL)
> +		return 0;
> +
> +	if (strcasecmp(token, "G") == 0)
> +		*def_inp_color = RTE_COLOR_GREEN;
> +	else if (strcasecmp(token, "Y") == 0)
> +		*def_inp_color = RTE_COLOR_YELLOW;
> +	else if (strcasecmp(token, "R") == 0)
> +		*def_inp_color = RTE_COLOR_RED;
> +	else
> +		return -1;
> +
> +	return 0;
> +}
> +
>  static int
>  parse_meter_color_str(char *c_str, uint32_t *use_prev_meter_color,
> -	enum rte_color **dscp_table)
> +	enum rte_color **vlan_table, enum rte_color **dscp_table)
>  {
>  	char *token;
>  	uint64_t previous_mtr_color = 0;
> @@ -147,8 +285,7 @@ parse_meter_color_str(char *c_str, uint32_t
> *use_prev_meter_color,
>  		return 0;
>  	}
> 
> -	/* Parse dscp table entries */
> -	ret = parse_dscp_table_entries(c_str, dscp_table);
> +	ret = parse_input_color_table_entries(c_str, dscp_table, vlan_table);
>  	if (ret != 0)
>  		return -1;
> 
> @@ -192,6 +329,43 @@ parse_multi_token_string(char *t_str, uint16_t
> *port_id,
>  	return 0;
>  }
> 
> +static int
> +parse_multi_token_vlan_str(char *t_str, uint16_t *port_id, uint32_t
> *mtr_id,
> +	enum rte_color **vlan_table)
> +{
> +	uint64_t val;
> +	char *token;
> +	int ret;
> +
> +	/* First token: port id */
> +	token = strtok_r(t_str, PARSE_DELIMITER, &t_str);
> +	if (token ==  NULL)
> +		return -1;
> +
> +	ret = parse_uint(&val, token);
> +	if (ret != 0 || val > UINT16_MAX)
> +		return -1;
> +
> +	*port_id = val;
> +
> +	/* Second token: meter id */
> +	token = strtok_r(t_str, PARSE_DELIMITER, &t_str);
> +	if (token == NULL)
> +		return 0;
> +
> +	ret = parse_uint(&val, token);
> +	if (ret != 0 || val > UINT32_MAX)
> +		return -1;
> +
> +	*mtr_id = val;
> +
> +	ret = parse_vlan_table_entries(t_str, vlan_table);
> +	if (ret != 0)
> +		return -1;
> +
> +	return 0;
> +}
> +
>  /* *** Show Port Meter Capabilities *** */  struct
> cmd_show_port_meter_cap_result {
>  	cmdline_fixed_string_t show;
> @@ -277,6 +451,10 @@ static void cmd_show_port_meter_cap_parsed(void
> *parsed_result,
>  	printf("cap.trtcm_rfc4115_packet_mode_supported %" PRId32 "\n",
>  		cap.trtcm_rfc4115_packet_mode_supported);
>  	printf("cap.stats_mask %" PRIx64 "\n", cap.stats_mask);
> +	printf("cap.input_color_proto_mask 0x%" PRIx64 "\n",
> +		cap.input_color_proto_mask);
> +	printf("cap.separate_input_color_table_per_port %" PRId32 "\n",
> +		cap.separate_input_color_table_per_port);
>  }
> 
>  cmdline_parse_inst_t cmd_show_port_meter_cap = { @@ -721,6 +899,7
> @@ struct cmd_create_port_meter_result {
>  	cmdline_fixed_string_t r_action;
>  	uint64_t statistics_mask;
>  	uint32_t shared;
> +	cmdline_fixed_string_t default_input_color;
>  	cmdline_multi_string_t meter_input_color;  };
> 
> @@ -754,6 +933,9 @@ static cmdline_parse_token_num_t
> cmd_create_port_meter_statistics_mask =  static
> cmdline_parse_token_num_t cmd_create_port_meter_shared =
>  	TOKEN_NUM_INITIALIZER(struct cmd_create_port_meter_result,
>  		shared, RTE_UINT32);
> +static cmdline_parse_token_string_t
> cmd_create_port_meter_default_input_color =
> +	TOKEN_STRING_INITIALIZER(struct cmd_create_port_meter_result,
> +		default_input_color, "R#Y#G#r#y#g");
>  static cmdline_parse_token_string_t cmd_create_port_meter_input_color =
>  	TOKEN_STRING_INITIALIZER(struct cmd_create_port_meter_result,
>  		meter_input_color, TOKEN_STRING_MULTI); @@ -769,7
> +951,10 @@ static void cmd_create_port_meter_parsed(void
> *parsed_result,
>  	uint32_t shared = res->shared;
>  	uint32_t use_prev_meter_color = 0;
>  	uint16_t port_id = res->port_id;
> +	uint64_t def_inp_color = 0;
>  	enum rte_color *dscp_table = NULL;
> +	enum rte_color *vlan_table = NULL;
> +	char *def_color_str = res->default_input_color;
>  	char *c_str = res->meter_input_color;
>  	int ret;
> 
> @@ -780,8 +965,18 @@ static void cmd_create_port_meter_parsed(void
> *parsed_result,
>  	memset(&params, 0, sizeof(struct rte_mtr_params));
>  	params.meter_profile_id = res->profile_id;
>  	params.meter_policy_id = res->policy_id;
> +
> +	/* Parse meter default input color string params */
> +	ret = parse_default_input_color_str(def_color_str, &def_inp_color);
> +	if (ret) {
> +		fprintf(stderr,
> +			" Meter default input color is invalid\n");
> +		return;
> +	}
> +
>  	/* Parse meter input color string params */
> -	ret = parse_meter_color_str(c_str, &use_prev_meter_color,
> &dscp_table);
> +	ret = parse_meter_color_str(c_str, &use_prev_meter_color,
> &vlan_table,
> +		&dscp_table);
>  	if (ret) {
>  		fprintf(stderr,
>  			" Meter input color params string parse error\n");
> @@ -789,16 +984,20 @@ static void cmd_create_port_meter_parsed(void
> *parsed_result,
>  	}
> 
>  	params.use_prev_mtr_color = use_prev_meter_color;
> +	params.vlan_table = vlan_table;
>  	params.dscp_table = dscp_table;
> +	params.default_input_color = def_inp_color;
> 
>  	if (strcmp(res->meter_enable, "yes") == 0)
>  		params.meter_enable = 1;
>  	else
>  		params.meter_enable = 0;
> +
>  	params.stats_mask = res->statistics_mask;
> 
>  	ret = rte_mtr_create(port_id, mtr_id, &params, shared, &error);
>  	if (ret != 0) {
> +		free(vlan_table);
>  		free(dscp_table);
>  		print_err_msg(&error);
>  		return;
> @@ -809,8 +1008,10 @@ cmdline_parse_inst_t cmd_create_port_meter = {
>  	.f = cmd_create_port_meter_parsed,
>  	.data = NULL,
>  	.help_str = "create port meter <port_id> <mtr_id> <profile_id>
> <policy_id> "
> -		"<meter_enable>(yes|no) <stats_mask> <shared>
> <use_pre_meter_color> "
> -		"[<dscp_tbl_entry0> <dscp_tbl_entry1>
> ...<dscp_tbl_entry63>]",
> +		"<meter_enable>(yes|no) <stats_mask> <shared> "
> +		"<default_input_color>(g|y|r) <use_pre_meter_color> "
> +		"[<dscp_tbl_entry0> <dscp_tbl_entry1>
> ...<dscp_tbl_entry63>] "
> +		"[<vlan_tbl_entry0> <vlan_tbl_entry1> ...
> <vlan_tbl_entry15>]",
>  	.tokens = {
>  		(void *)&cmd_create_port_meter_create,
>  		(void *)&cmd_create_port_meter_port,
> @@ -822,6 +1023,7 @@ cmdline_parse_inst_t cmd_create_port_meter = {
>  		(void *)&cmd_create_port_meter_meter_enable,
>  		(void *)&cmd_create_port_meter_statistics_mask,
>  		(void *)&cmd_create_port_meter_shared,
> +		(void *)&cmd_create_port_meter_default_input_color,
>  		(void *)&cmd_create_port_meter_input_color,
>  		NULL,
>  	},
> @@ -1224,6 +1426,344 @@ cmdline_parse_inst_t
> cmd_set_port_meter_dscp_table = {
>  	},
>  };
> 
> +/* *** Set Port Meter VLAN Table *** */ struct
> +cmd_set_port_meter_vlan_table_result {
> +	cmdline_fixed_string_t set;
> +	cmdline_fixed_string_t port;
> +	cmdline_fixed_string_t meter;
> +	cmdline_fixed_string_t vlan_table;
> +	cmdline_multi_string_t token_string;
> +};
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_set =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_vlan_table_result, set, "set");
> static
> +cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_port =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_vlan_table_result, port, "port");
> static
> +cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_meter =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_vlan_table_result, meter,
> "meter"); static
> +cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_vlan_table
> =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_vlan_table_result,
> +		vlan_table, "vlan table");
> +static cmdline_parse_token_string_t
> cmd_set_port_meter_vlan_table_token_string =
> +	TOKEN_STRING_INITIALIZER(struct
> cmd_set_port_meter_vlan_table_result,
> +		token_string, TOKEN_STRING_MULTI);
> +
> +static void cmd_set_port_meter_vlan_table_parsed(void *parsed_result,
> +	__rte_unused struct cmdline *cl,
> +	__rte_unused void *data)
> +{
> +	struct cmd_set_port_meter_vlan_table_result *res = parsed_result;
> +	struct rte_mtr_error error;
> +	enum rte_color *vlan_table = NULL;
> +	char *t_str = res->token_string;
> +	uint32_t mtr_id = 0;
> +	uint16_t port_id;
> +	int ret;
> +
> +	/* Parse string */
> +	ret = parse_multi_token_vlan_str(t_str, &port_id, &mtr_id,
> &vlan_table);
> +	if (ret) {
> +		fprintf(stderr, " Multi token string parse error\n");
> +		return;
> +	}
> +
> +	if (port_id_is_invalid(port_id, ENABLED_WARN))
> +		goto free_table;
> +
> +	/* Update Meter VLAN Table*/
> +	ret = rte_mtr_meter_vlan_table_update(port_id, mtr_id,
> +		vlan_table, &error);
> +	if (ret != 0)
> +		print_err_msg(&error);
> +
> +free_table:
> +	free(vlan_table);
> +}
> +
> +cmdline_parse_inst_t cmd_set_port_meter_vlan_table = {
> +	.f = cmd_set_port_meter_vlan_table_parsed,
> +	.data = NULL,
> +	.help_str = "set port meter vlan table <port_id> <mtr_id> "
> +		"[<vlan_tbl_entry0> <vlan_tbl_entry1> ...
> <vlan_tbl_entry15>]",
> +	.tokens = {
> +		(void *)&cmd_set_port_meter_vlan_table_set,
> +		(void *)&cmd_set_port_meter_vlan_table_port,
> +		(void *)&cmd_set_port_meter_vlan_table_meter,
> +		(void *)&cmd_set_port_meter_vlan_table_vlan_table,
> +		(void *)&cmd_set_port_meter_vlan_table_token_string,
> +		NULL,
> +	},
> +};
> +
> +/* *** Set Port Meter input protocol *** */ struct
> +cmd_set_port_meter_in_proto_result {
> +	cmdline_fixed_string_t set;
> +	cmdline_fixed_string_t port;
> +	cmdline_fixed_string_t meter;
> +	cmdline_fixed_string_t protocol;
> +	cmdline_fixed_string_t proto;
> +	uint32_t prio;
> +	uint32_t mtr_id;
> +	uint16_t port_id;
> +};
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_set =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, set, "set");
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_port =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, port, "port");
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_meter
> =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, meter,
> "meter");
> +
> +static cmdline_parse_token_string_t
> cmd_set_port_meter_in_proto_protocol =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, protocol,
> "proto");
> +
> +static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_proto
> =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, proto,
> +		"outer_vlan#inner_vlan#outer_ip#inner_ip");
> +
> +static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_prio =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, prio,
> RTE_UINT32);
> +
> +static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_port_id
> =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, port_id,
> RTE_UINT16);
> +
> +static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_mtr_id
> =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_set_port_meter_in_proto_result, mtr_id,
> RTE_UINT32);
> +
> +static void cmd_set_port_meter_in_proto_parsed(void *parsed_result,
> +	__rte_unused struct cmdline *cl,
> +	__rte_unused void *data)
> +{
> +	struct cmd_set_port_meter_in_proto_result *res = parsed_result;
> +	enum rte_mtr_color_in_protocol proto;
> +	struct rte_mtr_error error;
> +	int ret;
> +
> +	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> +		return;
> +
> +	if (strcmp(res->proto, "outer_vlan") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN;
> +	else if (strcmp(res->proto, "inner_vlan") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_INNER_VLAN;
> +	else if (strcmp(res->proto, "outer_ip") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_IP;
> +	else if (strcmp(res->proto, "inner_ip") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_INNER_IP;
> +	else {
> +		printf("Invalid protocol\n");
> +		return;
> +	}
> +
> +	/* Update Meter input proto and priority */
> +	ret = rte_mtr_color_in_protocol_set(res->port_id, res->mtr_id,
> +		proto, res->prio, &error);
> +	if (ret != 0)
> +		print_err_msg(&error);
> +}
> +
> +cmdline_parse_inst_t cmd_set_port_meter_in_proto = {
> +	.f = cmd_set_port_meter_in_proto_parsed,
> +	.data = NULL,
> +	.help_str = "set port meter proto <port_id> <mtr_id> <proto> "
> +		"<prio>",
> +	.tokens = {
> +		(void *)&cmd_set_port_meter_in_proto_set,
> +		(void *)&cmd_set_port_meter_in_proto_port,
> +		(void *)&cmd_set_port_meter_in_proto_meter,
> +		(void *)&cmd_set_port_meter_in_proto_protocol,
> +		(void *)&cmd_set_port_meter_in_proto_port_id,
> +		(void *)&cmd_set_port_meter_in_proto_mtr_id,
> +		(void *)&cmd_set_port_meter_in_proto_proto,
> +		(void *)&cmd_set_port_meter_in_proto_prio,
> +		NULL,
> +	},
> +};
> +
> +/* *** Get Port Meter input protocol *** */ struct
> +cmd_get_port_meter_in_proto_result {
> +	cmdline_fixed_string_t get;
> +	cmdline_fixed_string_t port;
> +	cmdline_fixed_string_t meter;
> +	cmdline_fixed_string_t protocol;
> +	uint32_t mtr_id;
> +	uint16_t port_id;
> +};
> +
> +static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_get =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_result, get, "get");
> +
> +static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_port =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_result, port, "port");
> +
> +static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_meter
> =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_result, meter,
> "meter");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_protocol =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_result, protocol,
> "proto");
> +
> +static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_port_id
> =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_result, port_id,
> RTE_UINT16);
> +
> +static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_mtr_id
> =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_result, mtr_id,
> RTE_UINT32);
> +
> +static void cmd_get_port_meter_in_proto_parsed(void *parsed_result,
> +	__rte_unused struct cmdline *cl,
> +	__rte_unused void *data)
> +{
> +	struct cmd_set_port_meter_in_proto_result *res = parsed_result;
> +	struct rte_mtr_error error;
> +	uint64_t proto_mask = 0;
> +	int ret;
> +
> +	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> +		return;
> +
> +	/* Update Meter input proto and priority */
> +	ret = rte_mtr_color_in_protocol_get(res->port_id, res->mtr_id,
> +		&proto_mask, &error);
> +	if (ret != 0)
> +		print_err_msg(&error);
> +
> +	printf("Enabled protocols:\n");
> +	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN)
> +		printf("\touter_vlan\n");
> +	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_INNER_VLAN)
> +		printf("\tinner_vlan\n");
> +	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_OUTER_IP)
> +		printf("\touter_ip\n");
> +	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_INNER_IP)
> +		printf("\tinner_ip\n");
> +}
> +
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto = {
> +	.f = cmd_get_port_meter_in_proto_parsed,
> +	.data = NULL,
> +	.help_str = "get port meter proto <port_id> <mtr_id>",
> +	.tokens = {
> +		(void *)&cmd_get_port_meter_in_proto_get,
> +		(void *)&cmd_get_port_meter_in_proto_port,
> +		(void *)&cmd_get_port_meter_in_proto_meter,
> +		(void *)&cmd_get_port_meter_in_proto_protocol,
> +		(void *)&cmd_get_port_meter_in_proto_port_id,
> +		(void *)&cmd_get_port_meter_in_proto_mtr_id,
> +		NULL,
> +	},
> +};
> +
> +/* *** Get Port Meter input protocol priority *** */ struct
> +cmd_get_port_meter_in_proto_prio_result {
> +	cmdline_fixed_string_t get;
> +	cmdline_fixed_string_t port;
> +	cmdline_fixed_string_t meter;
> +	cmdline_fixed_string_t protocol;
> +	cmdline_fixed_string_t proto;
> +	uint32_t mtr_id;
> +	uint16_t port_id;
> +};
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_get =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, get, "get");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_port =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, port,
> "port");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_meter =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, meter,
> "meter");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_protocol =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, protocol,
> +		"proto_prio");
> +
> +static cmdline_parse_token_string_t
> cmd_get_port_meter_in_proto_prio_proto =
> +	TOKEN_STRING_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, proto,
> +		"outer_vlan#inner_vlan#outer_ip#inner_ip");
> +
> +static cmdline_parse_token_num_t
> cmd_get_port_meter_in_proto_prio_port_id =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, port_id,
> +		RTE_UINT16);
> +
> +static cmdline_parse_token_num_t
> cmd_get_port_meter_in_proto_prio_mtr_id =
> +	TOKEN_NUM_INITIALIZER(
> +		struct cmd_get_port_meter_in_proto_prio_result, mtr_id,
> +		RTE_UINT32);
> +
> +static void cmd_get_port_meter_in_proto_prio_parsed(void
> *parsed_result,
> +	__rte_unused struct cmdline *cl,
> +	__rte_unused void *data)
> +{
> +	struct cmd_get_port_meter_in_proto_prio_result *res =
> parsed_result;
> +	enum rte_mtr_color_in_protocol proto;
> +	struct rte_mtr_error error;
> +	uint32_t prio = 0;
> +	int ret;
> +
> +	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> +		return;
> +
> +	if (strcmp(res->proto, "outer_vlan") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN;
> +	else if (strcmp(res->proto, "inner_vlan") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_INNER_VLAN;
> +	else if (strcmp(res->proto, "outer_ip") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_IP;
> +	else if (strcmp(res->proto, "inner_ip") == 0)
> +		proto = RTE_MTR_COLOR_IN_PROTO_INNER_IP;
> +	else {
> +		printf("Invalid protocol\n");
> +		return;
> +	}
> +
> +	/* Get Meter input proto and priority */
> +	ret = rte_mtr_color_in_protocol_priority_get(res->port_id, res-
> >mtr_id,
> +		proto, &prio, &error);
> +	if (ret != 0)
> +		print_err_msg(&error);
> +}
> +
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto_prio = {
> +	.f = cmd_get_port_meter_in_proto_prio_parsed,
> +	.data = NULL,
> +	.help_str = "get port meter proto_prio <port_id> <mtr_id> <proto>",
> +	.tokens = {
> +		(void *)&cmd_get_port_meter_in_proto_prio_get,
> +		(void *)&cmd_get_port_meter_in_proto_prio_port,
> +		(void *)&cmd_get_port_meter_in_proto_prio_meter,
> +		(void *)&cmd_get_port_meter_in_proto_prio_protocol,
> +		(void *)&cmd_get_port_meter_in_proto_prio_port_id,
> +		(void *)&cmd_get_port_meter_in_proto_prio_mtr_id,
> +		(void *)&cmd_get_port_meter_in_proto_prio_proto,
> +		NULL,
> +	},
> +};
> +
>  /* *** Set Port Meter Stats Mask *** */  struct
> cmd_set_port_meter_stats_mask_result {
>  	cmdline_fixed_string_t set;
> diff --git a/app/test-pmd/cmdline_mtr.h b/app/test-pmd/cmdline_mtr.h
> index 2415fc16c3..23eaa5bc03 100644
> --- a/app/test-pmd/cmdline_mtr.h
> +++ b/app/test-pmd/cmdline_mtr.h
> @@ -19,6 +19,10 @@ extern cmdline_parse_inst_t cmd_del_port_meter;
> extern cmdline_parse_inst_t cmd_del_port_meter_policy;  extern
> cmdline_parse_inst_t cmd_set_port_meter_profile;  extern
> cmdline_parse_inst_t cmd_set_port_meter_dscp_table;
> +extern cmdline_parse_inst_t cmd_set_port_meter_vlan_table; extern
> +cmdline_parse_inst_t cmd_set_port_meter_in_proto; extern
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto; extern
> +cmdline_parse_inst_t cmd_get_port_meter_in_proto_prio;
>  extern cmdline_parse_inst_t cmd_set_port_meter_stats_mask;  extern
> cmdline_parse_inst_t cmd_show_port_meter_stats;  void
> print_mtr_err_msg(struct rte_mtr_error *error); diff --git
> a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 0b7a53fdf1..4509a47ed4 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -2527,9 +2527,10 @@ create port meter  Create new meter object for
> the ethernet device::
> 
>     testpmd> create port meter (port_id) (mtr_id) (profile_id) \
> -   (policy_id) (meter_enable) (stats_mask) (shared) \
> +   (policy_id) (meter_enable) (stats_mask) (shared)
> + (default_input_color) \
>     (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\
> -   (dscp_tbl_entry63)]
> +   (dscp_tbl_entry63)] [(vlan_tbl_entry0) (vlan_tbl_entry1) ... \
> +   (vlan_tbl_entry15)]
> 
>  where:
> 
> @@ -2542,12 +2543,17 @@ where:
>    meter object.
>  * ``shared``:  When this parameter has a non-zero value, the meter object is
>    shared by multiple flows. Otherwise, meter object is used by single flow.
> +* ``default_input_color``:  Default input color for incoming packets.
> +  If incoming packet misses DSCP or VLAN input color table then it will
> +be used
> +  as input color.
>  * ``use_pre_meter_color``: When this parameter has a non-zero value, the
>    input color for the current meter object is determined by the latest meter
>    object in the same flow. Otherwise, the current meter object uses the
>    *dscp_table* to determine the input color.
>  * ``dscp_tbl_entryx``: DSCP table entry x providing meter providing input
>    color, 0 <= x <= 63.
> +* ``vlan_tbl_entryx``: VLAN table entry x providing meter input color,
> +  0 <= x <= 15.
> 
>  enable port meter
>  ~~~~~~~~~~~~~~~~~
> @@ -2585,6 +2591,31 @@ Set meter dscp table for the ethernet device::
>     testpmd> set port meter dscp table (port_id) (mtr_id) [(dscp_tbl_entry0) \
>     (dscp_tbl_entry1)...(dscp_tbl_entry63)]
> 
> +set port meter vlan table
> +~~~~~~~~~~~~~~~~~~~~~~~~~
> +Set meter vlan table for the ethernet device::
> +
> +   testpmd> set port meter vlan table (port_id) (mtr_id) [(vlan_tbl_entry0) \
> +   (vlan_tbl_entry1)...(vlan_tbl_entry15)]
> +
> +set port meter protocol
> +~~~~~~~~~~~~~~~~~~~~~~~
> +Set meter protocol and corresponding priority::
> +
> +   testpmd> set port meter proto (port_id) (mtr_id) (proto) (prio)
> +
> +get port meter protocol
> +~~~~~~~~~~~~~~~~~~~~~~~
> +Get meter protocol::
> +
> +   testpmd> get port meter proto (port_id) (mtr_id)
> +
> +get port meter protocol priority
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +Get priority associated to meter protocol::
> +
> +   testpmd> get port meter proto_prio (port_id) (mtr_id) (proto)
> +
>  set port meter stats mask
>  ~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> --
> 2.25.1
Andrew Rybchenko June 24, 2022, 12:44 p.m. UTC | #2
On 6/23/22 15:57, skori@marvell.com wrote:
> From: Sunil Kumar Kori <skori@marvell.com>
> 
> To enable input coloring, based on VLAN or DSCP, patch adds
> command line interface to configure the following:
> 
>   - configuring input coloring using VLAN or DSCP while creating
>     meter i.e. during rte_mtr_create()
> 
>   - Update VLAN input coloring table at runtime.
> 
>   - configures protocol priorities.
> 
>   - retrieve protocol and priority information
> 
> Depends-on: patch-22751 ("ethdev: mtr: support protocol based input color selection")
> 
> Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
> ---
> v4..v5:
>   - Update testpmd user guide.
> 
> v3..v4:
>   - Replace strcmp with strcasecmp whereever is needed.
>   
> v2..v3:
>   - Rebased to branch ToT dpdk-next-net/main
>   - Fix static keyword for newly added token parsing symbols
> 
> v1..v2:
>   - Rebased to branch dpdk-next-net
>   - add CLIs for input coloring mechanism
> 
>   app/test-pmd/cmdline.c                      |   4 +
>   app/test-pmd/cmdline_mtr.c                  | 552 +++++++++++++++++++-
>   app/test-pmd/cmdline_mtr.h                  |   4 +
>   doc/guides/testpmd_app_ug/testpmd_funcs.rst |  35 +-
>   4 files changed, 587 insertions(+), 8 deletions(-)

Applied to dpdk-next-net/main, thanks.
diff mbox series

Patch

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 9a7fd5fc35..ded7dfe656 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -14345,6 +14345,10 @@  static cmdline_parse_ctx_t builtin_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_del_port_meter_policy,
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_profile,
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_dscp_table,
+	(cmdline_parse_inst_t *)&cmd_set_port_meter_vlan_table,
+	(cmdline_parse_inst_t *)&cmd_set_port_meter_in_proto,
+	(cmdline_parse_inst_t *)&cmd_get_port_meter_in_proto,
+	(cmdline_parse_inst_t *)&cmd_get_port_meter_in_proto_prio,
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
 	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
 	(cmdline_parse_inst_t *)&cmd_mcast_addr,
diff --git a/app/test-pmd/cmdline_mtr.c b/app/test-pmd/cmdline_mtr.c
index 57050ec9af..b92e66cedb 100644
--- a/app/test-pmd/cmdline_mtr.c
+++ b/app/test-pmd/cmdline_mtr.c
@@ -14,6 +14,7 @@ 
 #include "cmdline_mtr.h"
 
 #define PARSE_DELIMITER				" \f\n\r\t\v"
+#define MAX_VLAN_TABLE_ENTRIES		16
 #define MAX_DSCP_TABLE_ENTRIES		64
 
 /** Display Meter Error Message */
@@ -82,6 +83,122 @@  parse_uint(uint64_t *value, const char *str)
 	return 0;
 }
 
+static int
+parse_input_color_table_entries(char *str, enum rte_color **dscp_table,
+	enum rte_color **vlan_table)
+{
+	enum rte_color *vlan, *dscp;
+	char *token;
+	int i = 0;
+
+	token = strtok_r(str, PARSE_DELIMITER, &str);
+	if (token == NULL)
+		return 0;
+
+	/* Allocate memory for dscp table */
+	dscp = (enum rte_color *)malloc(MAX_DSCP_TABLE_ENTRIES *
+		sizeof(enum rte_color));
+	if (dscp == NULL)
+		return -1;
+
+	while (1) {
+		if (strcasecmp(token, "G") == 0)
+			dscp[i++] = RTE_COLOR_GREEN;
+		else if (strcasecmp(token, "Y") == 0)
+			dscp[i++] = RTE_COLOR_YELLOW;
+		else if (strcasecmp(token, "R") == 0)
+			dscp[i++] = RTE_COLOR_RED;
+		else {
+			free(dscp);
+			return -1;
+		}
+		if (i == MAX_DSCP_TABLE_ENTRIES)
+			break;
+
+		token = strtok_r(str, PARSE_DELIMITER, &str);
+		if (token == NULL) {
+			free(dscp);
+			return -1;
+		}
+	}
+
+	*dscp_table = dscp;
+
+	token = strtok_r(str, PARSE_DELIMITER, &str);
+	if (token == NULL)
+		return 0;
+
+	/* Allocate memory for vlan table */
+	vlan = (enum rte_color *)malloc(MAX_VLAN_TABLE_ENTRIES *
+		sizeof(enum rte_color));
+	if (vlan == NULL)
+		return -1;
+
+	i = 0;
+	while (1) {
+		if (strcasecmp(token, "G") == 0)
+			vlan[i++] = RTE_COLOR_GREEN;
+		else if (strcasecmp(token, "Y") == 0)
+			vlan[i++] = RTE_COLOR_YELLOW;
+		else if (strcasecmp(token, "R") == 0)
+			vlan[i++] = RTE_COLOR_RED;
+		else {
+			free(vlan);
+			return -1;
+		}
+		if (i == MAX_VLAN_TABLE_ENTRIES)
+			break;
+
+		token = strtok_r(str, PARSE_DELIMITER, &str);
+		if (token == NULL) {
+			free(vlan);
+			return -1;
+		}
+	}
+
+	*vlan_table = vlan;
+	return 0;
+}
+
+static int
+parse_vlan_table_entries(char *str, enum rte_color **vlan_table)
+{
+	char *token;
+	int i = 0;
+
+	token = strtok_r(str, PARSE_DELIMITER, &str);
+	if (token == NULL)
+		return 0;
+
+	/* Allocate memory for vlan table */
+	*vlan_table = (enum rte_color *)malloc(MAX_VLAN_TABLE_ENTRIES *
+		sizeof(enum rte_color));
+	if (*vlan_table == NULL)
+		return -1;
+
+	while (1) {
+		if (strcasecmp(token, "G") == 0)
+			(*vlan_table)[i++] = RTE_COLOR_GREEN;
+		else if (strcasecmp(token, "Y") == 0)
+			(*vlan_table)[i++] = RTE_COLOR_YELLOW;
+		else if (strcasecmp(token, "R") == 0)
+			(*vlan_table)[i++] = RTE_COLOR_RED;
+		else {
+			free(*vlan_table);
+			return -1;
+		}
+		if (i == MAX_VLAN_TABLE_ENTRIES)
+			break;
+
+		token = strtok_r(str, PARSE_DELIMITER, &str);
+		if (token == NULL) {
+			free(*vlan_table);
+			return -1;
+		}
+	}
+	return 0;
+}
+
 static int
 parse_dscp_table_entries(char *str, enum rte_color **dscp_table)
 {
@@ -124,9 +241,30 @@  parse_dscp_table_entries(char *str, enum rte_color **dscp_table)
 	return 0;
 }
 
+static int
+parse_default_input_color_str(char *str, uint64_t *def_inp_color)
+{
+	char *token;
+
+	token = strtok_r(str, PARSE_DELIMITER, &str);
+	if (token == NULL)
+		return 0;
+
+	if (strcasecmp(token, "G") == 0)
+		*def_inp_color = RTE_COLOR_GREEN;
+	else if (strcasecmp(token, "Y") == 0)
+		*def_inp_color = RTE_COLOR_YELLOW;
+	else if (strcasecmp(token, "R") == 0)
+		*def_inp_color = RTE_COLOR_RED;
+	else
+		return -1;
+
+	return 0;
+}
+
 static int
 parse_meter_color_str(char *c_str, uint32_t *use_prev_meter_color,
-	enum rte_color **dscp_table)
+	enum rte_color **vlan_table, enum rte_color **dscp_table)
 {
 	char *token;
 	uint64_t previous_mtr_color = 0;
@@ -147,8 +285,7 @@  parse_meter_color_str(char *c_str, uint32_t *use_prev_meter_color,
 		return 0;
 	}
 
-	/* Parse dscp table entries */
-	ret = parse_dscp_table_entries(c_str, dscp_table);
+	ret = parse_input_color_table_entries(c_str, dscp_table, vlan_table);
 	if (ret != 0)
 		return -1;
 
@@ -192,6 +329,43 @@  parse_multi_token_string(char *t_str, uint16_t *port_id,
 	return 0;
 }
 
+static int
+parse_multi_token_vlan_str(char *t_str, uint16_t *port_id, uint32_t *mtr_id,
+	enum rte_color **vlan_table)
+{
+	uint64_t val;
+	char *token;
+	int ret;
+
+	/* First token: port id */
+	token = strtok_r(t_str, PARSE_DELIMITER, &t_str);
+	if (token ==  NULL)
+		return -1;
+
+	ret = parse_uint(&val, token);
+	if (ret != 0 || val > UINT16_MAX)
+		return -1;
+
+	*port_id = val;
+
+	/* Second token: meter id */
+	token = strtok_r(t_str, PARSE_DELIMITER, &t_str);
+	if (token == NULL)
+		return 0;
+
+	ret = parse_uint(&val, token);
+	if (ret != 0 || val > UINT32_MAX)
+		return -1;
+
+	*mtr_id = val;
+
+	ret = parse_vlan_table_entries(t_str, vlan_table);
+	if (ret != 0)
+		return -1;
+
+	return 0;
+}
+
 /* *** Show Port Meter Capabilities *** */
 struct cmd_show_port_meter_cap_result {
 	cmdline_fixed_string_t show;
@@ -277,6 +451,10 @@  static void cmd_show_port_meter_cap_parsed(void *parsed_result,
 	printf("cap.trtcm_rfc4115_packet_mode_supported %" PRId32 "\n",
 		cap.trtcm_rfc4115_packet_mode_supported);
 	printf("cap.stats_mask %" PRIx64 "\n", cap.stats_mask);
+	printf("cap.input_color_proto_mask 0x%" PRIx64 "\n",
+		cap.input_color_proto_mask);
+	printf("cap.separate_input_color_table_per_port %" PRId32 "\n",
+		cap.separate_input_color_table_per_port);
 }
 
 cmdline_parse_inst_t cmd_show_port_meter_cap = {
@@ -721,6 +899,7 @@  struct cmd_create_port_meter_result {
 	cmdline_fixed_string_t r_action;
 	uint64_t statistics_mask;
 	uint32_t shared;
+	cmdline_fixed_string_t default_input_color;
 	cmdline_multi_string_t meter_input_color;
 };
 
@@ -754,6 +933,9 @@  static cmdline_parse_token_num_t cmd_create_port_meter_statistics_mask =
 static cmdline_parse_token_num_t cmd_create_port_meter_shared =
 	TOKEN_NUM_INITIALIZER(struct cmd_create_port_meter_result,
 		shared, RTE_UINT32);
+static cmdline_parse_token_string_t cmd_create_port_meter_default_input_color =
+	TOKEN_STRING_INITIALIZER(struct cmd_create_port_meter_result,
+		default_input_color, "R#Y#G#r#y#g");
 static cmdline_parse_token_string_t cmd_create_port_meter_input_color =
 	TOKEN_STRING_INITIALIZER(struct cmd_create_port_meter_result,
 		meter_input_color, TOKEN_STRING_MULTI);
@@ -769,7 +951,10 @@  static void cmd_create_port_meter_parsed(void *parsed_result,
 	uint32_t shared = res->shared;
 	uint32_t use_prev_meter_color = 0;
 	uint16_t port_id = res->port_id;
+	uint64_t def_inp_color = 0;
 	enum rte_color *dscp_table = NULL;
+	enum rte_color *vlan_table = NULL;
+	char *def_color_str = res->default_input_color;
 	char *c_str = res->meter_input_color;
 	int ret;
 
@@ -780,8 +965,18 @@  static void cmd_create_port_meter_parsed(void *parsed_result,
 	memset(&params, 0, sizeof(struct rte_mtr_params));
 	params.meter_profile_id = res->profile_id;
 	params.meter_policy_id = res->policy_id;
+
+	/* Parse meter default input color string params */
+	ret = parse_default_input_color_str(def_color_str, &def_inp_color);
+	if (ret) {
+		fprintf(stderr,
+			" Meter default input color is invalid\n");
+		return;
+	}
+
 	/* Parse meter input color string params */
-	ret = parse_meter_color_str(c_str, &use_prev_meter_color, &dscp_table);
+	ret = parse_meter_color_str(c_str, &use_prev_meter_color, &vlan_table,
+		&dscp_table);
 	if (ret) {
 		fprintf(stderr,
 			" Meter input color params string parse error\n");
@@ -789,16 +984,20 @@  static void cmd_create_port_meter_parsed(void *parsed_result,
 	}
 
 	params.use_prev_mtr_color = use_prev_meter_color;
+	params.vlan_table = vlan_table;
 	params.dscp_table = dscp_table;
+	params.default_input_color = def_inp_color;
 
 	if (strcmp(res->meter_enable, "yes") == 0)
 		params.meter_enable = 1;
 	else
 		params.meter_enable = 0;
+
 	params.stats_mask = res->statistics_mask;
 
 	ret = rte_mtr_create(port_id, mtr_id, &params, shared, &error);
 	if (ret != 0) {
+		free(vlan_table);
 		free(dscp_table);
 		print_err_msg(&error);
 		return;
@@ -809,8 +1008,10 @@  cmdline_parse_inst_t cmd_create_port_meter = {
 	.f = cmd_create_port_meter_parsed,
 	.data = NULL,
 	.help_str = "create port meter <port_id> <mtr_id> <profile_id> <policy_id> "
-		"<meter_enable>(yes|no) <stats_mask> <shared> <use_pre_meter_color> "
-		"[<dscp_tbl_entry0> <dscp_tbl_entry1> ...<dscp_tbl_entry63>]",
+		"<meter_enable>(yes|no) <stats_mask> <shared> "
+		"<default_input_color>(g|y|r) <use_pre_meter_color> "
+		"[<dscp_tbl_entry0> <dscp_tbl_entry1> ...<dscp_tbl_entry63>] "
+		"[<vlan_tbl_entry0> <vlan_tbl_entry1> ... <vlan_tbl_entry15>]",
 	.tokens = {
 		(void *)&cmd_create_port_meter_create,
 		(void *)&cmd_create_port_meter_port,
@@ -822,6 +1023,7 @@  cmdline_parse_inst_t cmd_create_port_meter = {
 		(void *)&cmd_create_port_meter_meter_enable,
 		(void *)&cmd_create_port_meter_statistics_mask,
 		(void *)&cmd_create_port_meter_shared,
+		(void *)&cmd_create_port_meter_default_input_color,
 		(void *)&cmd_create_port_meter_input_color,
 		NULL,
 	},
@@ -1224,6 +1426,344 @@  cmdline_parse_inst_t cmd_set_port_meter_dscp_table = {
 	},
 };
 
+/* *** Set Port Meter VLAN Table *** */
+struct cmd_set_port_meter_vlan_table_result {
+	cmdline_fixed_string_t set;
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t meter;
+	cmdline_fixed_string_t vlan_table;
+	cmdline_multi_string_t token_string;
+};
+
+static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_set =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_vlan_table_result, set, "set");
+static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_port =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_vlan_table_result, port, "port");
+static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_meter =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_vlan_table_result, meter, "meter");
+static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_vlan_table =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_vlan_table_result,
+		vlan_table, "vlan table");
+static cmdline_parse_token_string_t cmd_set_port_meter_vlan_table_token_string =
+	TOKEN_STRING_INITIALIZER(struct cmd_set_port_meter_vlan_table_result,
+		token_string, TOKEN_STRING_MULTI);
+
+static void cmd_set_port_meter_vlan_table_parsed(void *parsed_result,
+	__rte_unused struct cmdline *cl,
+	__rte_unused void *data)
+{
+	struct cmd_set_port_meter_vlan_table_result *res = parsed_result;
+	struct rte_mtr_error error;
+	enum rte_color *vlan_table = NULL;
+	char *t_str = res->token_string;
+	uint32_t mtr_id = 0;
+	uint16_t port_id;
+	int ret;
+
+	/* Parse string */
+	ret = parse_multi_token_vlan_str(t_str, &port_id, &mtr_id, &vlan_table);
+	if (ret) {
+		fprintf(stderr, " Multi token string parse error\n");
+		return;
+	}
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN))
+		goto free_table;
+
+	/* Update Meter VLAN Table*/
+	ret = rte_mtr_meter_vlan_table_update(port_id, mtr_id,
+		vlan_table, &error);
+	if (ret != 0)
+		print_err_msg(&error);
+
+free_table:
+	free(vlan_table);
+}
+
+cmdline_parse_inst_t cmd_set_port_meter_vlan_table = {
+	.f = cmd_set_port_meter_vlan_table_parsed,
+	.data = NULL,
+	.help_str = "set port meter vlan table <port_id> <mtr_id> "
+		"[<vlan_tbl_entry0> <vlan_tbl_entry1> ... <vlan_tbl_entry15>]",
+	.tokens = {
+		(void *)&cmd_set_port_meter_vlan_table_set,
+		(void *)&cmd_set_port_meter_vlan_table_port,
+		(void *)&cmd_set_port_meter_vlan_table_meter,
+		(void *)&cmd_set_port_meter_vlan_table_vlan_table,
+		(void *)&cmd_set_port_meter_vlan_table_token_string,
+		NULL,
+	},
+};
+
+/* *** Set Port Meter input protocol *** */
+struct cmd_set_port_meter_in_proto_result {
+	cmdline_fixed_string_t set;
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t meter;
+	cmdline_fixed_string_t protocol;
+	cmdline_fixed_string_t proto;
+	uint32_t prio;
+	uint32_t mtr_id;
+	uint16_t port_id;
+};
+
+static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_set =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, set, "set");
+
+static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_port =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, port, "port");
+
+static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_meter =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, meter, "meter");
+
+static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_protocol =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, protocol, "proto");
+
+static cmdline_parse_token_string_t cmd_set_port_meter_in_proto_proto =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, proto,
+		"outer_vlan#inner_vlan#outer_ip#inner_ip");
+
+static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_prio =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, prio, RTE_UINT32);
+
+static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_port_id =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, port_id, RTE_UINT16);
+
+static cmdline_parse_token_num_t cmd_set_port_meter_in_proto_mtr_id =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_set_port_meter_in_proto_result, mtr_id, RTE_UINT32);
+
+static void cmd_set_port_meter_in_proto_parsed(void *parsed_result,
+	__rte_unused struct cmdline *cl,
+	__rte_unused void *data)
+{
+	struct cmd_set_port_meter_in_proto_result *res = parsed_result;
+	enum rte_mtr_color_in_protocol proto;
+	struct rte_mtr_error error;
+	int ret;
+
+	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+		return;
+
+	if (strcmp(res->proto, "outer_vlan") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN;
+	else if (strcmp(res->proto, "inner_vlan") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_INNER_VLAN;
+	else if (strcmp(res->proto, "outer_ip") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_IP;
+	else if (strcmp(res->proto, "inner_ip") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_INNER_IP;
+	else {
+		printf("Invalid protocol\n");
+		return;
+	}
+
+	/* Update Meter input proto and priority */
+	ret = rte_mtr_color_in_protocol_set(res->port_id, res->mtr_id,
+		proto, res->prio, &error);
+	if (ret != 0)
+		print_err_msg(&error);
+}
+
+cmdline_parse_inst_t cmd_set_port_meter_in_proto = {
+	.f = cmd_set_port_meter_in_proto_parsed,
+	.data = NULL,
+	.help_str = "set port meter proto <port_id> <mtr_id> <proto> "
+		"<prio>",
+	.tokens = {
+		(void *)&cmd_set_port_meter_in_proto_set,
+		(void *)&cmd_set_port_meter_in_proto_port,
+		(void *)&cmd_set_port_meter_in_proto_meter,
+		(void *)&cmd_set_port_meter_in_proto_protocol,
+		(void *)&cmd_set_port_meter_in_proto_port_id,
+		(void *)&cmd_set_port_meter_in_proto_mtr_id,
+		(void *)&cmd_set_port_meter_in_proto_proto,
+		(void *)&cmd_set_port_meter_in_proto_prio,
+		NULL,
+	},
+};
+
+/* *** Get Port Meter input protocol *** */
+struct cmd_get_port_meter_in_proto_result {
+	cmdline_fixed_string_t get;
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t meter;
+	cmdline_fixed_string_t protocol;
+	uint32_t mtr_id;
+	uint16_t port_id;
+};
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_get =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_result, get, "get");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_port =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_result, port, "port");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_meter =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_result, meter, "meter");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_protocol =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_result, protocol, "proto");
+
+static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_port_id =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_result, port_id, RTE_UINT16);
+
+static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_mtr_id =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_result, mtr_id, RTE_UINT32);
+
+static void cmd_get_port_meter_in_proto_parsed(void *parsed_result,
+	__rte_unused struct cmdline *cl,
+	__rte_unused void *data)
+{
+	struct cmd_set_port_meter_in_proto_result *res = parsed_result;
+	struct rte_mtr_error error;
+	uint64_t proto_mask = 0;
+	int ret;
+
+	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+		return;
+
+	/* Update Meter input proto and priority */
+	ret = rte_mtr_color_in_protocol_get(res->port_id, res->mtr_id,
+		&proto_mask, &error);
+	if (ret != 0)
+		print_err_msg(&error);
+
+	printf("Enabled protocols:\n");
+	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN)
+		printf("\touter_vlan\n");
+	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_INNER_VLAN)
+		printf("\tinner_vlan\n");
+	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_OUTER_IP)
+		printf("\touter_ip\n");
+	if (proto_mask & RTE_MTR_COLOR_IN_PROTO_INNER_IP)
+		printf("\tinner_ip\n");
+}
+
+cmdline_parse_inst_t cmd_get_port_meter_in_proto = {
+	.f = cmd_get_port_meter_in_proto_parsed,
+	.data = NULL,
+	.help_str = "get port meter proto <port_id> <mtr_id>",
+	.tokens = {
+		(void *)&cmd_get_port_meter_in_proto_get,
+		(void *)&cmd_get_port_meter_in_proto_port,
+		(void *)&cmd_get_port_meter_in_proto_meter,
+		(void *)&cmd_get_port_meter_in_proto_protocol,
+		(void *)&cmd_get_port_meter_in_proto_port_id,
+		(void *)&cmd_get_port_meter_in_proto_mtr_id,
+		NULL,
+	},
+};
+
+/* *** Get Port Meter input protocol priority *** */
+struct cmd_get_port_meter_in_proto_prio_result {
+	cmdline_fixed_string_t get;
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t meter;
+	cmdline_fixed_string_t protocol;
+	cmdline_fixed_string_t proto;
+	uint32_t mtr_id;
+	uint16_t port_id;
+};
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_prio_get =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, get, "get");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_prio_port =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, port, "port");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_prio_meter =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, meter, "meter");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_prio_protocol =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, protocol,
+		"proto_prio");
+
+static cmdline_parse_token_string_t cmd_get_port_meter_in_proto_prio_proto =
+	TOKEN_STRING_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, proto,
+		"outer_vlan#inner_vlan#outer_ip#inner_ip");
+
+static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_prio_port_id =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, port_id,
+		RTE_UINT16);
+
+static cmdline_parse_token_num_t cmd_get_port_meter_in_proto_prio_mtr_id =
+	TOKEN_NUM_INITIALIZER(
+		struct cmd_get_port_meter_in_proto_prio_result, mtr_id,
+		RTE_UINT32);
+
+static void cmd_get_port_meter_in_proto_prio_parsed(void *parsed_result,
+	__rte_unused struct cmdline *cl,
+	__rte_unused void *data)
+{
+	struct cmd_get_port_meter_in_proto_prio_result *res = parsed_result;
+	enum rte_mtr_color_in_protocol proto;
+	struct rte_mtr_error error;
+	uint32_t prio = 0;
+	int ret;
+
+	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+		return;
+
+	if (strcmp(res->proto, "outer_vlan") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_VLAN;
+	else if (strcmp(res->proto, "inner_vlan") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_INNER_VLAN;
+	else if (strcmp(res->proto, "outer_ip") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_OUTER_IP;
+	else if (strcmp(res->proto, "inner_ip") == 0)
+		proto = RTE_MTR_COLOR_IN_PROTO_INNER_IP;
+	else {
+		printf("Invalid protocol\n");
+		return;
+	}
+
+	/* Get Meter input proto and priority */
+	ret = rte_mtr_color_in_protocol_priority_get(res->port_id, res->mtr_id,
+		proto, &prio, &error);
+	if (ret != 0)
+		print_err_msg(&error);
+}
+
+cmdline_parse_inst_t cmd_get_port_meter_in_proto_prio = {
+	.f = cmd_get_port_meter_in_proto_prio_parsed,
+	.data = NULL,
+	.help_str = "get port meter proto_prio <port_id> <mtr_id> <proto>",
+	.tokens = {
+		(void *)&cmd_get_port_meter_in_proto_prio_get,
+		(void *)&cmd_get_port_meter_in_proto_prio_port,
+		(void *)&cmd_get_port_meter_in_proto_prio_meter,
+		(void *)&cmd_get_port_meter_in_proto_prio_protocol,
+		(void *)&cmd_get_port_meter_in_proto_prio_port_id,
+		(void *)&cmd_get_port_meter_in_proto_prio_mtr_id,
+		(void *)&cmd_get_port_meter_in_proto_prio_proto,
+		NULL,
+	},
+};
+
 /* *** Set Port Meter Stats Mask *** */
 struct cmd_set_port_meter_stats_mask_result {
 	cmdline_fixed_string_t set;
diff --git a/app/test-pmd/cmdline_mtr.h b/app/test-pmd/cmdline_mtr.h
index 2415fc16c3..23eaa5bc03 100644
--- a/app/test-pmd/cmdline_mtr.h
+++ b/app/test-pmd/cmdline_mtr.h
@@ -19,6 +19,10 @@  extern cmdline_parse_inst_t cmd_del_port_meter;
 extern cmdline_parse_inst_t cmd_del_port_meter_policy;
 extern cmdline_parse_inst_t cmd_set_port_meter_profile;
 extern cmdline_parse_inst_t cmd_set_port_meter_dscp_table;
+extern cmdline_parse_inst_t cmd_set_port_meter_vlan_table;
+extern cmdline_parse_inst_t cmd_set_port_meter_in_proto;
+extern cmdline_parse_inst_t cmd_get_port_meter_in_proto;
+extern cmdline_parse_inst_t cmd_get_port_meter_in_proto_prio;
 extern cmdline_parse_inst_t cmd_set_port_meter_stats_mask;
 extern cmdline_parse_inst_t cmd_show_port_meter_stats;
 void print_mtr_err_msg(struct rte_mtr_error *error);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 0b7a53fdf1..4509a47ed4 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -2527,9 +2527,10 @@  create port meter
 Create new meter object for the ethernet device::
 
    testpmd> create port meter (port_id) (mtr_id) (profile_id) \
-   (policy_id) (meter_enable) (stats_mask) (shared) \
+   (policy_id) (meter_enable) (stats_mask) (shared) (default_input_color) \
    (use_pre_meter_color) [(dscp_tbl_entry0) (dscp_tbl_entry1)...\
-   (dscp_tbl_entry63)]
+   (dscp_tbl_entry63)] [(vlan_tbl_entry0) (vlan_tbl_entry1) ... \
+   (vlan_tbl_entry15)]
 
 where:
 
@@ -2542,12 +2543,17 @@  where:
   meter object.
 * ``shared``:  When this parameter has a non-zero value, the meter object is
   shared by multiple flows. Otherwise, meter object is used by single flow.
+* ``default_input_color``:  Default input color for incoming packets.
+  If incoming packet misses DSCP or VLAN input color table then it will be used
+  as input color.
 * ``use_pre_meter_color``: When this parameter has a non-zero value, the
   input color for the current meter object is determined by the latest meter
   object in the same flow. Otherwise, the current meter object uses the
   *dscp_table* to determine the input color.
 * ``dscp_tbl_entryx``: DSCP table entry x providing meter providing input
   color, 0 <= x <= 63.
+* ``vlan_tbl_entryx``: VLAN table entry x providing meter input color,
+  0 <= x <= 15.
 
 enable port meter
 ~~~~~~~~~~~~~~~~~
@@ -2585,6 +2591,31 @@  Set meter dscp table for the ethernet device::
    testpmd> set port meter dscp table (port_id) (mtr_id) [(dscp_tbl_entry0) \
    (dscp_tbl_entry1)...(dscp_tbl_entry63)]
 
+set port meter vlan table
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Set meter vlan table for the ethernet device::
+
+   testpmd> set port meter vlan table (port_id) (mtr_id) [(vlan_tbl_entry0) \
+   (vlan_tbl_entry1)...(vlan_tbl_entry15)]
+
+set port meter protocol
+~~~~~~~~~~~~~~~~~~~~~~~
+Set meter protocol and corresponding priority::
+
+   testpmd> set port meter proto (port_id) (mtr_id) (proto) (prio)
+
+get port meter protocol
+~~~~~~~~~~~~~~~~~~~~~~~
+Get meter protocol::
+
+   testpmd> get port meter proto (port_id) (mtr_id)
+
+get port meter protocol priority
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Get priority associated to meter protocol::
+
+   testpmd> get port meter proto_prio (port_id) (mtr_id) (proto)
+
 set port meter stats mask
 ~~~~~~~~~~~~~~~~~~~~~~~~~