[v1,03/18] net/r8169: add hardware registers access routines

Message ID 20241015030928.70642-4-howard_wang@realsil.com.cn (mailing list archive)
State Changes Requested
Delegated to: Ferruh Yigit
Headers
Series net/r8169: add r8169 pmd to dpdk |

Checks

Context Check Description
ci/checkpatch warning coding style issues

Commit Message

王颢 Oct. 15, 2024, 3:09 a.m. UTC
Add implementation for hardware registers access routines.

Signed-off-by: Howard Wang <howard_wang@realsil.com.cn>
---
 drivers/net/r8169/meson.build    |   1 +
 drivers/net/r8169/r8169_base.h   | 389 +++++++++++++++++++++++++++++++
 drivers/net/r8169/r8169_ethdev.h |   1 +
 drivers/net/r8169/r8169_hw.c     |  94 ++++++++
 drivers/net/r8169/r8169_hw.h     |  29 +++
 5 files changed, 514 insertions(+)
 create mode 100644 drivers/net/r8169/r8169_hw.c
 create mode 100644 drivers/net/r8169/r8169_hw.h
  

Patch

diff --git a/drivers/net/r8169/meson.build b/drivers/net/r8169/meson.build
index e37b4fb237..f659e56192 100644
--- a/drivers/net/r8169/meson.build
+++ b/drivers/net/r8169/meson.build
@@ -3,5 +3,6 @@ 
 
 sources = files(
 		'r8169_ethdev.c',
+		'r8169_hw.c',
 )
 
diff --git a/drivers/net/r8169/r8169_base.h b/drivers/net/r8169/r8169_base.h
index c3b0186daa..0e79d8d22a 100644
--- a/drivers/net/r8169/r8169_base.h
+++ b/drivers/net/r8169/r8169_base.h
@@ -5,12 +5,401 @@ 
 #ifndef _R8169_BASE_H_
 #define _R8169_BASE_H_
 
+#include <stdint.h>
+#include <stddef.h>
+#include <inttypes.h>
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_cycles.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_byteorder.h>
+#include <rte_io.h>
+#include <rte_version.h>
+
 typedef uint8_t   u8;
 typedef uint16_t  u16;
 typedef uint32_t  u32;
 typedef uint64_t  u64;
 
+enum RTL_registers {
+	MAC0            = 0x00,     /* Ethernet hardware address */
+	MAC4            = 0x04,
+	MAR0            = 0x08,     /* Multicast filter */
+	CounterAddrLow  = 0x10,
+	CounterAddrHigh = 0x14,
+	CustomLED       = 0x18,
+	TxDescStartAddrLow  = 0x20,
+	TxDescStartAddrHigh = 0x24,
+	TxHDescStartAddrLow = 0x28,
+	TxHDescStartAddrHigh = 0x2C,
+	FLASH           = 0x30,
+	INT_CFG0_8125   = 0x34,
+	ERSR            = 0x36,
+	ChipCmd         = 0x37,
+	TxPoll          = 0x38,
+	IntrMask        = 0x3C,
+	IntrStatus      = 0x3E,
+	TxConfig        = 0x40,
+	RxConfig        = 0x44,
+	TCTR            = 0x48,
+	Cfg9346         = 0x50,
+	Config0         = 0x51,
+	Config1         = 0x52,
+	Config2         = 0x53,
+	Config3         = 0x54,
+	Config4         = 0x55,
+	Config5         = 0x56,
+	TDFNR           = 0x57,
+	TimeInt0        = 0x58,
+	TimeInt1        = 0x5C,
+	PHYAR           = 0x60,
+	CSIDR           = 0x64,
+	CSIAR           = 0x68,
+	PHYstatus       = 0x6C,
+	MACDBG          = 0x6D,
+	GPIO            = 0x6E,
+	PMCH            = 0x6F,
+	ERIDR           = 0x70,
+	ERIAR           = 0x74,
+	INT_CFG1_8125   = 0x7A,
+	EPHY_RXER_NUM   = 0x7C,
+	EPHYAR          = 0x80,
+	TimeInt2        = 0x8C,
+	OCPDR           = 0xB0,
+	MACOCP          = 0xB0,
+	OCPAR           = 0xB4,
+	SecMAC0         = 0xB4,
+	SecMAC4         = 0xB8,
+	PHYOCP          = 0xB8,
+	DBG_reg         = 0xD1,
+	TwiCmdReg       = 0xD2,
+	MCUCmd_reg      = 0xD3,
+	RxMaxSize       = 0xDA,
+	EFUSEAR         = 0xDC,
+	CPlusCmd        = 0xE0,
+	IntrMitigate    = 0xE2,
+	RxDescAddrLow   = 0xE4,
+	RxDescAddrHigh  = 0xE8,
+	MTPS            = 0xEC,
+	FuncEvent       = 0xF0,
+	PPSW            = 0xF2,
+	FuncEventMask   = 0xF4,
+	TimeInt3        = 0xF4,
+	FuncPresetState = 0xF8,
+	CMAC_IBCR0      = 0xF8,
+	CMAC_IBCR2      = 0xF9,
+	CMAC_IBIMR0     = 0xFA,
+	CMAC_IBISR0     = 0xFB,
+	FuncForceEvent  = 0xFC,
+
+	/* 8125 */
+	IMR0_8125          = 0x38,
+	ISR0_8125          = 0x3C,
+	TPPOLL_8125        = 0x90,
+	IMR1_8125          = 0x800,
+	ISR1_8125          = 0x802,
+	IMR2_8125          = 0x804,
+	ISR2_8125          = 0x806,
+	IMR3_8125          = 0x808,
+	ISR3_8125          = 0x80A,
+	BACKUP_ADDR0_8125  = 0x19E0,
+	BACKUP_ADDR1_8125  = 0X19E4,
+	TCTR0_8125         = 0x0048,
+	TCTR1_8125         = 0x004C,
+	TCTR2_8125         = 0x0088,
+	TCTR3_8125         = 0x001C,
+	TIMER_INT0_8125    = 0x0058,
+	TIMER_INT1_8125    = 0x005C,
+	TIMER_INT2_8125    = 0x008C,
+	TIMER_INT3_8125    = 0x00F4,
+	INT_MITI_V2_0_RX   = 0x0A00,
+	INT_MITI_V2_0_TX   = 0x0A02,
+	INT_MITI_V2_1_RX   = 0x0A08,
+	INT_MITI_V2_1_TX   = 0x0A0A,
+	IMR_V2_CLEAR_REG_8125 = 0x0D00,
+	ISR_V2_8125           = 0x0D04,
+	IMR_V2_SET_REG_8125   = 0x0D0C,
+	TDU_STA_8125       = 0x0D08,
+	RDU_STA_8125       = 0x0D0A,
+	IMR_V4_L2_CLEAR_REG_8125 = 0x0D10,
+	IMR_V4_L2_SET_REG_8125   = 0x0D18,
+	ISR_V4_L2_8125      = 0x0D14,
+	DOUBLE_VLAN_CONFIG = 0x1000,
+	TX_NEW_CTRL        = 0x203E,
+	TNPDS_Q1_LOW_8125  = 0x2100,
+	PLA_TXQ0_IDLE_CREDIT = 0x2500,
+	PLA_TXQ1_IDLE_CREDIT = 0x2504,
+	SW_TAIL_PTR0_8125  = 0x2800,
+	HW_CLO_PTR0_8125   = 0x2802,
+	SW_TAIL_PTR0_8126  = 0x2800,
+	HW_CLO_PTR0_8126   = 0x2800,
+	RDSAR_Q1_LOW_8125  = 0x4000,
+	RSS_CTRL_8125      = 0x4500,
+	Q_NUM_CTRL_8125    = 0x4800,
+	RSS_KEY_8125       = 0x4600,
+	RSS_INDIRECTION_TBL_8125_V2 = 0x4700,
+	EEE_TXIDLE_TIMER_8125 = 0x6048,
+};
+
+enum RTL_register_content {
+	/* Interrupt status bits */
+	SYSErr      = 0x8000,
+	PCSTimeout  = 0x4000,
+	SWInt       = 0x0100,
+	TxDescUnavail = 0x0080,
+	RxFIFOOver  = 0x0040,
+	LinkChg     = 0x0020,
+	RxDescUnavail = 0x0010,
+	TxErr       = 0x0008,
+	TxOK        = 0x0004,
+	RxErr       = 0x0002,
+	RxOK        = 0x0001,
+
+	/* RX status desc */
+	RxRWT  = (1UL << 22),
+	RxRES  = (1UL << 21),
+	RxRUNT = (1UL << 20),
+	RxCRC  = (1UL << 19),
+
+	/* ChipCmd bits */
+	StopReq    = 0x80,
+	CmdReset   = 0x10,
+	CmdRxEnb   = 0x08,
+	CmdTxEnb   = 0x04,
+	RxBufEmpty = 0x01,
+
+	/* Cfg9346 bits */
+	Cfg9346_Lock = 0x00,
+	Cfg9346_Unlock = 0xC0,
+	Cfg9346_EEDO = (1UL << 0),
+	Cfg9346_EEDI = (1UL << 1),
+	Cfg9346_EESK = (1UL << 2),
+	Cfg9346_EECS = (1UL << 3),
+	Cfg9346_EEM0 = (1UL << 6),
+	Cfg9346_EEM1 = (1UL << 7),
+
+	/* RX mode bits */
+	AcceptErr       = 0x20,
+	AcceptRunt      = 0x10,
+	AcceptBroadcast = 0x08,
+	AcceptMulticast = 0x04,
+	AcceptMyPhys    = 0x02,
+	AcceptAllPhys   = 0x01,
+
+	/* Transmit priority polling */
+	HPQ    = 0x80,
+	NPQ    = 0x40,
+	FSWInt = 0x01,
+
+	/* RX config bits */
+	Reserved2_shift     = 13,
+	RxCfgDMAShift       = 8,
+	EnableRxDescV3      = (1 << 24),
+	EnableOuterVlan     = (1 << 23),
+	EnableInnerVlan     = (1 << 22),
+	RxCfg_128_int_en    = (1 << 15),
+	RxCfg_fet_multi_en  = (1 << 14),
+	RxCfg_half_refetch  = (1 << 13),
+	RxCfg_pause_slot_en = (1 << 11),
+	RxCfg_9356SEL       = (1 << 6),
+	EnableRxDescV4_0    = (1 << 1), /* Not in rcr */
+
+	/* TX config bits */
+	TxInterFrameGapShift = 24,
+	TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits. */
+	TxMACLoopBack = (1UL << 17),  /* MAC loopback */
+
+	/* Config1 register */
+	LEDS1       = (1UL << 7),
+	LEDS0       = (1UL << 6),
+	Speed_down  = (1UL << 4),
+	MEMMAP      = (1UL << 3),
+	IOMAP       = (1UL << 2),
+	VPD         = (1UL << 1),
+	PMEnable    = (1UL << 0), /* Power management enable */
+
+	/* Config2 register */
+	PMSTS_En    = (1UL << 5),
+
+	/* Config3 register */
+	Isolate_en  = (1UL << 12), /* Isolate enable */
+	MagicPacket = (1UL << 5),  /* Wake up when receives a magic packet */
+	LinkUp      = (1UL << 4),  /* This bit is reserved in RTL8125B. */
+
+	/* Wake up when the cable connection is re-established */
+	ECRCEN      = (1UL << 3), /* This bit is reserved in RTL8125B. */
+	Jumbo_En0   = (1UL << 2), /* This bit is reserved in RTL8125B. */
+	RDY_TO_L23  = (1UL << 1), /* This bit is reserved in RTL8125B. */
+	Beacon_en   = (1UL << 0), /* This bit is reserved in RTL8125B. */
+
+	/* Config4 register */
+	Jumbo_En1   = (1UL << 1), /* This bit is reserved in RTL8125B. */
+
+	/* Config5 register */
+	BWF         = (1UL << 6), /* Accept broadcast wakeup frame */
+	MWF         = (1UL << 5), /* Accept multicast wakeup frame */
+	UWF         = (1UL << 4), /* Accept unicast wakeup frame */
+	LanWake     = (1UL << 1), /* LanWake enable/disable */
+	PMEStatus   = (1UL << 0), /* PME status can be reset by PCI RST#. */
+
+	/* CPlusCmd */
+	EnableBist      = (1UL << 15),
+	Macdbgo_oe      = (1UL << 14),
+	Normal_mode     = (1UL << 13),
+	Force_halfdup   = (1UL << 12),
+	Force_rxflow_en = (1UL << 11),
+	Force_txflow_en = (1UL << 10),
+	Cxpl_dbg_sel    = (1UL << 9), /* This bit is reserved in RTL8125B. */
+	ASF             = (1UL << 8), /* This bit is reserved in RTL8125C. */
+	PktCntrDisable  = (1UL << 7),
+	RxVlan          = (1UL << 6),
+	RxChkSum        = (1UL << 5),
+	Macdbgo_sel = 0x001C,
+	INTT_0      = 0x0000,
+	INTT_1      = 0x0001,
+	INTT_2      = 0x0002,
+	INTT_3      = 0x0003,
+
+	/* PHY status */
+	PowerSaveStatus = 0x80,
+	_2500bpsF       = 0x400,
+	TxFlowCtrl      = 0x40,
+	RxFlowCtrl      = 0x20,
+	_1000bpsF       = 0x10,
+	_100bps         = 0x08,
+	_10bps          = 0x04,
+	LinkStatus      = 0x02,
+	FullDup         = 0x01,
+
+	/* DBG reg */
+	Fix_Nak_1 = (1UL << 4),
+	Fix_Nak_2 = (1UL << 3),
+	DBGPIN_E2 = (1UL << 0),
+
+	/* Reset counter command */
+	CounterReset = 0x1,
+	/* Dump counter command */
+	CounterDump = 0x8,
+
+	/* PHY access */
+	PHYAR_Flag      = 0x80000000,
+	PHYAR_Write     = 0x80000000,
+	PHYAR_Read      = 0x00000000,
+	PHYAR_Reg_Mask  = 0x1f,
+	PHYAR_Reg_shift = 16,
+	PHYAR_Data_Mask = 0xffff,
+
+	/* EPHY access */
+	EPHYAR_Flag        = 0x80000000,
+	EPHYAR_Write       = 0x80000000,
+	EPHYAR_Read        = 0x00000000,
+	EPHYAR_Reg_Mask    = 0x3f,
+	EPHYAR_Reg_Mask_v2 = 0x7f,
+	EPHYAR_Reg_shift   = 16,
+	EPHYAR_Data_Mask   = 0xffff,
+
+	/* CSI access */
+	CSIAR_Flag         = 0x80000000,
+	CSIAR_Write        = 0x80000000,
+	CSIAR_Read         = 0x00000000,
+	CSIAR_ByteEn       = 0x0f,
+	CSIAR_ByteEn_shift = 12,
+	CSIAR_Addr_Mask    = 0x0fff,
+
+	/* ERI access */
+	ERIAR_Flag         = 0x80000000,
+	ERIAR_Write        = 0x80000000,
+	ERIAR_Read         = 0x00000000,
+	ERIAR_Addr_Align   = 4, /* ERI access register address must be 4 byte alignment. */
+	ERIAR_ExGMAC       = 0,
+	ERIAR_MSIX         = 1,
+	ERIAR_ASF          = 2,
+	ERIAR_OOB          = 2,
+	ERIAR_Type_shift   = 16,
+	ERIAR_ByteEn       = 0x0f,
+	ERIAR_ByteEn_shift = 12,
+
+	/* OCP GPHY access */
+	OCPDR_Write           = 0x80000000,
+	OCPDR_Read            = 0x00000000,
+	OCPDR_Reg_Mask        = 0xFF,
+	OCPDR_Data_Mask       = 0xFFFF,
+	OCPDR_GPHY_Reg_shift  = 16,
+	OCPAR_Flag            = 0x80000000,
+	OCPAR_GPHY_Write      = 0x8000F060,
+	OCPAR_GPHY_Read       = 0x0000F060,
+	OCPR_Write            = 0x80000000,
+	OCPR_Read             = 0x00000000,
+	OCPR_Addr_Reg_shift   = 16,
+	OCPR_Flag             = 0x80000000,
+	OCP_STD_PHY_BASE_PAGE = 0x0A40,
+
+	/* MCU command */
+	Now_is_oob   = (1UL << 7),
+	Txfifo_empty = (1UL << 5),
+	Rxfifo_empty = (1UL << 4),
+
+	/* E-FUSE access */
+	EFUSE_WRITE       = 0x80000000,
+	EFUSE_WRITE_OK    = 0x00000000,
+	EFUSE_READ        = 0x00000000,
+	EFUSE_READ_OK     = 0x80000000,
+	EFUSE_WRITE_V3    = 0x40000000,
+	EFUSE_WRITE_OK_V3 = 0x00000000,
+	EFUSE_READ_V3     = 0x80000000,
+	EFUSE_READ_OK_V3  = 0x00000000,
+	EFUSE_Reg_Mask    = 0x03FF,
+	EFUSE_Reg_Shift   = 8,
+	EFUSE_Check_Cnt   = 300,
+	EFUSE_READ_FAIL   = 0xFF,
+	EFUSE_Data_Mask   = 0x000000FF,
+
+	/* GPIO */
+	GPIO_en = (1UL << 0),
+
+	/* New interrupt bits */
+	INT_CFG0_ENABLE_8125            = (1 << 0),
+	INT_CFG0_TIMEOUT0_BYPASS_8125   = (1 << 1),
+	INT_CFG0_MITIGATION_BYPASS_8125 = (1 << 2),
+	ISRIMR_V2_ROK_Q0     = (1 << 0),
+	ISRIMR_TOK_Q0        = (1 << 16),
+	ISRIMR_TOK_Q1        = (1 << 18),
+	ISRIMR_V2_LINKCHG    = (1 << 21),
+};
+
 #define PCI_VENDOR_ID_REALTEK 0x10EC
 
+#define RTL_PCI_REG_ADDR(hw, reg) ((u8 *)(hw)->mmio_addr + (reg))
+
+#define RTL_R8(hw, reg) rte_read8(RTL_PCI_REG_ADDR(hw, reg))
+#define RTL_R16(hw, reg) rtl_read16(RTL_PCI_REG_ADDR(hw, reg))
+#define RTL_R32(hw, reg) rtl_read32(RTL_PCI_REG_ADDR(hw, reg))
+
+#define RTL_W8(hw, reg, val) \
+	rte_write8((val), RTL_PCI_REG_ADDR(hw, reg))
+#define RTL_W16(hw, reg, val) \
+	rte_write16((rte_cpu_to_le_16(val)), RTL_PCI_REG_ADDR(hw, reg))
+#define RTL_W32(hw, reg, val) \
+	rte_write32((rte_cpu_to_le_32(val)), RTL_PCI_REG_ADDR(hw, reg))
+
+#define mdelay rte_delay_ms
+#define udelay rte_delay_us
+#define msleep rte_delay_ms
+#define usleep rte_delay_us
+
+static inline u32
+rtl_read32(volatile void *addr)
+{
+	return rte_le_to_cpu_32(rte_read32(addr));
+}
+
+static inline u32
+rtl_read16(volatile void *addr)
+{
+	return rte_le_to_cpu_16(rte_read16(addr));
+}
+
 #endif
 
diff --git a/drivers/net/r8169/r8169_ethdev.h b/drivers/net/r8169/r8169_ethdev.h
index 5453832e04..04458dc497 100644
--- a/drivers/net/r8169/r8169_ethdev.h
+++ b/drivers/net/r8169/r8169_ethdev.h
@@ -15,6 +15,7 @@ 
 
 struct rtl_hw {
 	u8 adapter_stopped;
+	u8 *mmio_addr;
 };
 
 struct rtl_sw_stats {
diff --git a/drivers/net/r8169/r8169_hw.c b/drivers/net/r8169/r8169_hw.c
new file mode 100644
index 0000000000..b3c0c23ecf
--- /dev/null
+++ b/drivers/net/r8169/r8169_hw.c
@@ -0,0 +1,94 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Realtek Corporation. All rights reserved
+ */
+
+#include <sys/queue.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdarg.h>
+
+#include <rte_ether.h>
+#include <ethdev_driver.h>
+
+#include "r8169_hw.h"
+#include "r8169_logs.h"
+
+void
+rtl_mac_ocp_write(struct rtl_hw *hw, u16 addr, u16 value)
+{
+	u32 data32;
+
+	data32 = addr / 2;
+	data32 <<= OCPR_Addr_Reg_shift;
+	data32 += value;
+	data32 |= OCPR_Write;
+
+	RTL_W32(hw, MACOCP, data32);
+}
+
+u16
+rtl_mac_ocp_read(struct rtl_hw *hw, u16 addr)
+{
+	u32 data32;
+	u16 data16 = 0;
+
+	data32 = addr / 2;
+	data32 <<= OCPR_Addr_Reg_shift;
+
+	RTL_W32(hw, MACOCP, data32);
+	data16 = (u16)RTL_R32(hw, MACOCP);
+
+	return data16;
+}
+
+u32
+rtl_csi_read(struct rtl_hw *hw, u32 addr)
+{
+	u32 cmd;
+	int i;
+	u32 value = 0;
+
+	cmd = CSIAR_Read | CSIAR_ByteEn << CSIAR_ByteEn_shift |
+	      (addr & CSIAR_Addr_Mask);
+
+	RTL_W32(hw, CSIAR, cmd);
+
+	for (i = 0; i < 10; i++) {
+		udelay(100);
+
+		/* Check if the NIC has completed CSI read */
+		if (RTL_R32(hw, CSIAR) & CSIAR_Flag) {
+			value = RTL_R32(hw, CSIDR);
+			break;
+		}
+	}
+
+	udelay(20);
+
+	return value;
+}
+
+void
+rtl_csi_write(struct rtl_hw *hw, u32 addr, u32 value)
+{
+	u32 cmd;
+	int i;
+
+	RTL_W32(hw, CSIDR, value);
+	cmd = CSIAR_Write | CSIAR_ByteEn << CSIAR_ByteEn_shift |
+	      (addr & CSIAR_Addr_Mask);
+
+	RTL_W32(hw, CSIAR, cmd);
+
+	for (i = 0; i < RTL_CHANNEL_WAIT_COUNT; i++) {
+		udelay(RTL_CHANNEL_WAIT_TIME);
+
+		/* Check if the NIC has completed CSI write */
+		if (!(RTL_R32(hw, CSIAR) & CSIAR_Flag))
+			break;
+	}
+
+	udelay(RTL_CHANNEL_EXIT_DELAY_TIME);
+}
+
diff --git a/drivers/net/r8169/r8169_hw.h b/drivers/net/r8169/r8169_hw.h
new file mode 100644
index 0000000000..e62b99a068
--- /dev/null
+++ b/drivers/net/r8169/r8169_hw.h
@@ -0,0 +1,29 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Realtek Corporation. All rights reserved
+ */
+
+#ifndef _R8169_HW_H_
+#define _R8169_HW_H_
+
+#include <stdint.h>
+
+#include <bus_pci_driver.h>
+#include <rte_ethdev.h>
+#include <rte_ethdev_core.h>
+
+#include "r8169_base.h"
+#include "r8169_ethdev.h"
+
+u16 rtl_mac_ocp_read(struct rtl_hw *hw, u16 addr);
+void rtl_mac_ocp_write(struct rtl_hw *hw, u16 addr, u16 value);
+
+u32 rtl_csi_read(struct rtl_hw *hw, u32 addr);
+void rtl_csi_write(struct rtl_hw *hw, u32 addr, u32 value);
+
+/* Channel wait count */
+#define RTL_CHANNEL_WAIT_COUNT      20000
+#define RTL_CHANNEL_WAIT_TIME       1   /*  1 us */
+#define RTL_CHANNEL_EXIT_DELAY_TIME 20  /* 20 us */
+
+#endif
+