@@ -262,6 +262,7 @@ Chris Wright <chrisw@redhat.com>
Chuanshe Zhang <zhangchuanshe@icloudshield.com>
Chuanyu Xue <chuanyu.xue@uconn.edu>
Chuhong Yao <ych@panath.cn>
+Chunhao Lin <hau@realtek.com>
Chunsong Feng <fengchunsong@huawei.com>
Churchill Khangar <churchill.khangar@intel.com>
Cian Ferriter <cian.ferriter@intel.com>
@@ -561,6 +562,7 @@ Hongjun Ni <hongjun.ni@intel.com>
Hongzhi Guo <guohongzhi1@huawei.com>
Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Horia Geanta Neag <horia.geanta@nxp.com>
+Howard Wang <howard_wang@realsil.com.cn>
H. Peter Anvin <hpa@linux.intel.com>
Hrvoje Habjanic <hrvoje.habjanic@zg.ht.hr>
Huaibin Wang <huaibin.wang@6wind.com>
@@ -1682,6 +1684,7 @@ Xieming Katty <katty.xieming@huawei.com>
Xinfeng Zhao <xinfengx.zhao@intel.com>
Xingguang He <xingguang.he@intel.com>
Xingyou Chen <niatlantice@gmail.com>
+Xing Wang <xing_wang@realsil.com.cn>
Xinying Yu <xinying.yu@corigine.com>
Xin Long <longxin.xl@alibaba-inc.com>
Xi Zhang <xix.zhang@intel.com>
@@ -995,6 +995,14 @@ F: drivers/net/qede/
F: doc/guides/nics/qede.rst
F: doc/guides/nics/features/qede*.ini
+Realtek r8169
+M: Howard Wang <howard_wang@realsil.com.cn>
+M: Chunhao Lin <hau@realtek.com>
+M: Xing Wang <xing_wang@realsil.com.cn>
+F: drivers/net/r8169/
+F: doc/guides/nics/r8169.rst
+F: doc/guides/nics/features/r8169.ini
+
Solarflare sfc_efx
M: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
F: drivers/common/sfc_efx/
new file mode 100644
@@ -0,0 +1,9 @@
+;
+; Supported features of the 'r8169' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux = Y
+x86-32 = Y
+x86-64 = Y
@@ -60,6 +60,7 @@ Network Interface Controller Drivers
pcap_ring
pfe
qede
+ r8169
sfc_efx
softnic
tap
new file mode 100644
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2024 Realtek Corporation. All rights reserved
+
+R8169 Poll Mode Driver
+======================
+
+The R8169 PMD provides poll mode driver support for Realtek 2.5 and 5 Gigabit
+Ethernet NICs.
+
+More information about Realtek 2.5G Ethernet NIC can be found at `RTL8125
+<https://www.realtek.com/Product/Index?id=3962&cate_id=786&menu_id=1010>`_.
+More information about Realtek 5G Ethernet NIC can be found at `RTL8126
+<https://www.realtek.com/Product/ProductHitsDetail?id=4425&menu_id=643>`_.
+
+Supported Chipsets and NICs
+---------------------------
+
+- Realtek RTL8125 2.5 Gigabit Ethernet Controller
+- Realtek RTL8126 5 Gigabit Ethernet Controller
@@ -170,6 +170,11 @@ New Features
* Added asynchronous flow support
* Added MTU update
+* **Added Realtek network PMD.**
+
+ Added a new network PMD which supports Realtek 2.5 and 5 Gigabit
+ Ethernet NICs.
+
* **Updated ZTE zxdh net driver [EXPERIMENTAL].**
* Added ethdev driver support for zxdh NX Series Ethernet Controller.
@@ -52,6 +52,7 @@ drivers = [
'pcap',
'pfe',
'qede',
+ 'r8169',
'ring',
'sfc',
'softnic',
new file mode 100644
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2024 Realtek Corporation. All rights reserved
+
+sources = files(
+ 'r8169_ethdev.c',
+)
new file mode 100644
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Realtek Corporation. All rights reserved
+ */
+
+#ifndef _R8169_COMPAT_H_
+#define _R8169_COMPAT_H_
+
+#include <stdint.h>
+
+typedef uint8_t u8;
+typedef uint16_t u16;
+typedef uint32_t u32;
+typedef uint64_t u64;
+
+#define PCI_VENDOR_ID_REALTEK 0x10EC
+
+#endif
new file mode 100644
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Realtek Corporation. All rights reserved
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+
+#include <rte_eal.h>
+
+#include <rte_common.h>
+#include <rte_pci.h>
+#include <bus_pci_driver.h>
+#include <rte_ether.h>
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
+#include <dev_driver.h>
+
+#include "r8169_ethdev.h"
+#include "r8169_compat.h"
+
+static int rtl_dev_configure(struct rte_eth_dev *dev);
+static int rtl_dev_start(struct rte_eth_dev *dev);
+static int rtl_dev_stop(struct rte_eth_dev *dev);
+static int rtl_dev_reset(struct rte_eth_dev *dev);
+static int rtl_dev_close(struct rte_eth_dev *dev);
+
+/*
+ * The set of PCI devices this driver supports
+ */
+static const struct rte_pci_id pci_id_r8169_map[] = {
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8125) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8162) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8126) },
+ { RTE_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x5000) },
+ {.vendor_id = 0, /* sentinel */ },
+};
+
+static const struct eth_dev_ops rtl_eth_dev_ops = {
+ .dev_configure = rtl_dev_configure,
+ .dev_start = rtl_dev_start,
+ .dev_stop = rtl_dev_stop,
+ .dev_close = rtl_dev_close,
+ .dev_reset = rtl_dev_reset,
+};
+
+static int
+rtl_dev_configure(struct rte_eth_dev *dev __rte_unused)
+{
+ return 0;
+}
+
+/*
+ * Configure device link speed and setup link.
+ * It returns 0 on success.
+ */
+static int
+rtl_dev_start(struct rte_eth_dev *dev __rte_unused)
+{
+ return 0;
+}
+
+/*
+ * Stop device: disable RX and TX functions to allow for reconfiguring.
+ */
+static int
+rtl_dev_stop(struct rte_eth_dev *dev __rte_unused)
+{
+ return 0;
+}
+
+/*
+ * Reset and stop device.
+ */
+static int
+rtl_dev_close(struct rte_eth_dev *dev)
+{
+ int ret_stp;
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ ret_stp = rtl_dev_stop(dev);
+
+ return ret_stp;
+}
+
+static int
+rtl_dev_init(struct rte_eth_dev *dev)
+{
+ dev->dev_ops = &rtl_eth_dev_ops;
+
+ /* For secondary processes, the primary process has done all the work */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ return 0;
+}
+
+static int
+rtl_dev_uninit(struct rte_eth_dev *dev)
+{
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return -EPERM;
+
+ rtl_dev_close(dev);
+
+ return 0;
+}
+
+static int
+rtl_dev_reset(struct rte_eth_dev *dev)
+{
+ int ret;
+
+ ret = rtl_dev_uninit(dev);
+ if (ret)
+ return ret;
+
+ ret = rtl_dev_init(dev);
+
+ return ret;
+}
+
+static int
+rtl_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_pci_generic_probe(pci_dev, sizeof(struct rtl_adapter),
+ rtl_dev_init);
+}
+
+static int
+rtl_pci_remove(struct rte_pci_device *pci_dev)
+{
+ return rte_eth_dev_pci_generic_remove(pci_dev, rtl_dev_uninit);
+}
+
+static struct rte_pci_driver rte_r8169_pmd = {
+ .id_table = pci_id_r8169_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
+ .probe = rtl_pci_probe,
+ .remove = rtl_pci_remove,
+};
+
+RTE_PMD_REGISTER_PCI(net_r8169, rte_r8169_pmd);
+RTE_PMD_REGISTER_PCI_TABLE(net_r8169, pci_id_r8169_map);
+RTE_PMD_REGISTER_KMOD_DEP(net_r8169, "* igb_uio | uio_pci_generic | vfio-pci");
new file mode 100644
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2024 Realtek Corporation. All rights reserved
+ */
+
+#ifndef _R8169_ETHDEV_H_
+#define _R8169_ETHDEV_H_
+
+#include <stdint.h>
+
+#include <rte_ethdev.h>
+#include <rte_ethdev_core.h>
+
+#include "r8169_compat.h"
+
+struct rtl_sw_stats {
+ u64 tx_packets;
+ u64 tx_bytes;
+ u64 tx_errors;
+ u64 rx_packets;
+ u64 rx_bytes;
+ u64 rx_errors;
+};
+
+struct rtl_adapter {
+ struct rtl_sw_stats sw_stats;
+};
+
+#endif