[V1] test_plans/vhost_enqueue_interrupt_test_plan: remove old testplan

Message ID 20200827094108.110920-1-qimaix.xiao@intel.com (mailing list archive)
State Accepted
Headers
Series [V1] test_plans/vhost_enqueue_interrupt_test_plan: remove old testplan |

Commit Message

Xiao, QimaiX Aug. 27, 2020, 9:41 a.m. UTC
*. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by test_plans/vhost_user_interrupt_test_plan.rst

Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
---
 .../vhost_enqueue_interrupt_test_plan.rst     | 145 ------------------
 1 file changed, 145 deletions(-)
 delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
  

Comments

Xiao, QimaiX Aug. 27, 2020, 10:13 a.m. UTC | #1
Tested-by: Xiao Qimai <qimaix.xiao@intel.com>

Regards,
Xiao Qimai

> -----Original Message-----
> From: Xiao, QimaiX <qimaix.xiao@intel.com>
> Sent: Thursday, August 27, 2020 5:41 PM
> To: dts@dpdk.org
> Cc: Xiao, QimaiX <qimaix.xiao@intel.com>
> Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> remove old testplan
> 
> *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> test_plans/vhost_user_interrupt_test_plan.rst
> 
> Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
> ---
>  .../vhost_enqueue_interrupt_test_plan.rst     | 145 ------------------
>  1 file changed, 145 deletions(-)
>  delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
> 
> diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> b/test_plans/vhost_enqueue_interrupt_test_plan.rst
> deleted file mode 100644
> index ee9b7a5d..00000000
> --- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> +++ /dev/null
> @@ -1,145 +0,0 @@
> -.. Copyright (c) <2019>, Intel Corporation
> -   All rights reserved.
> -
> -   Redistribution and use in source and binary forms, with or without
> -   modification, are permitted provided that the following conditions
> -   are met:
> -
> -   - Redistributions of source code must retain the above copyright
> -     notice, this list of conditions and the following disclaimer.
> -
> -   - Redistributions in binary form must reproduce the above copyright
> -     notice, this list of conditions and the following disclaimer in
> -     the documentation and/or other materials provided with the
> -     distribution.
> -
> -   - Neither the name of Intel Corporation nor the names of its
> -     contributors may be used to endorse or promote products derived
> -     from this software without specific prior written permission.
> -
> -   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> -   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> -   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> -   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> -   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> -   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> -   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> -   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> -   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> -   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> -   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> -   OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -======================================
> -vhost enqueue interrupt mode test plan
> -======================================
> -
> -Description
> -===========
> -
> -Vhost enqueue interrupt need test with l3fwd-power sample, small packets
> send from virtio-user to vhost side,
> -check vhost-user cores can be wakeup,and vhost-user cores should be
> back to sleep after stop sending packets -from virtio side.
> -
> -Prerequisites
> -=============
> -
> -Modify l3fwd-power example code and recompile::
> -
> -        --- a/examples/l3fwd-power/main.c
> -        +++ b/examples/l3fwd-power/main.c
> -        @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
> -                .mq_mode        = ETH_MQ_RX_RSS,
> -                .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> -                .split_hdr_size = 0,
> -        -       .offloads = DEV_RX_OFFLOAD_CHECKSUM,
> -        },
> -        .rx_adv_conf = {
> -                .rss_conf = {
> -
> -Test flow
> -=========
> -
> -Virtio-user --> Vhost-user
> -
> -Test Case1: Wake up split ring vhost-user core with l3fwd-power sample -
> ==========================================================
> ============
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1 -- -i
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> ptype 1 --config "(0,0,2)"
> -
> -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user core will sleep and
> wakeup again.
> -
> -Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample
> when multi queues are enabled -
> ==========================================================
> ===========================================
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=4 -- -i --rxq=4 --txq=4 --rss-ip
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> --log-level=9 \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> ptype 1 \
> -    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> -
> -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup
> status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user cores will sleep and
> wakeup again.
> -
> -Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample -
> ==========================================================
> =============
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1,packed_vq=1 -- -i
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> ptype 1 --config "(0,0,2)"
> -
> -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user core will sleep and
> wakeup again.
> -
> -Test Case4:  Wake up packed ring vhost-user cores with l3fwd-power
> sample when multi queues are enabled -
> ==========================================================
> =============================================
> -
> -1. Launch virtio-user with server mode::
> -
> -    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> -    --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> -    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> --log-level=9 \
> -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> ptype 1 \
> -    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> -
> -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup
> status::
> -
> -    testpmd>set fwd txonly
> -    testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user cores will sleep and
> wakeup again.
> --
> 2.25.1
  
Tu, Lijuan Sept. 2, 2020, 2:18 a.m. UTC | #2
test_plans/vhost_enqueue_interrupt_test_plan.rst: does not exist

> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Xiao, QimaiX
> Sent: 2020年8月27日 18:13
> To: dts@dpdk.org
> Subject: Re: [dts] [PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> remove old testplan
> 
> Tested-by: Xiao Qimai <qimaix.xiao@intel.com>
> 
> Regards,
> Xiao Qimai
> 
> > -----Original Message-----
> > From: Xiao, QimaiX <qimaix.xiao@intel.com>
> > Sent: Thursday, August 27, 2020 5:41 PM
> > To: dts@dpdk.org
> > Cc: Xiao, QimaiX <qimaix.xiao@intel.com>
> > Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> > remove old testplan
> >
> > *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> > test_plans/vhost_user_interrupt_test_plan.rst
> >
> > Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
> > ---
> >  .../vhost_enqueue_interrupt_test_plan.rst     | 145 ------------------
> >  1 file changed, 145 deletions(-)
> >  delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
> >
> > diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> > b/test_plans/vhost_enqueue_interrupt_test_plan.rst
> > deleted file mode 100644
> > index ee9b7a5d..00000000
> > --- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> > +++ /dev/null
> > @@ -1,145 +0,0 @@
> > -.. Copyright (c) <2019>, Intel Corporation
> > -   All rights reserved.
> > -
> > -   Redistribution and use in source and binary forms, with or without
> > -   modification, are permitted provided that the following conditions
> > -   are met:
> > -
> > -   - Redistributions of source code must retain the above copyright
> > -     notice, this list of conditions and the following disclaimer.
> > -
> > -   - Redistributions in binary form must reproduce the above copyright
> > -     notice, this list of conditions and the following disclaimer in
> > -     the documentation and/or other materials provided with the
> > -     distribution.
> > -
> > -   - Neither the name of Intel Corporation nor the names of its
> > -     contributors may be used to endorse or promote products derived
> > -     from this software without specific prior written permission.
> > -
> > -   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > -   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > -   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS
> > -   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > -   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> > INDIRECT,
> > -   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > -   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> > GOODS OR
> > -   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> > -   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> > CONTRACT,
> > -   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> > -   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> > ADVISED
> > -   OF THE POSSIBILITY OF SUCH DAMAGE.
> > -
> > -======================================
> > -vhost enqueue interrupt mode test plan
> > -======================================
> > -
> > -Description
> > -===========
> > -
> > -Vhost enqueue interrupt need test with l3fwd-power sample, small
> > packets send from virtio-user to vhost side,
> > -check vhost-user cores can be wakeup,and vhost-user cores should be
> > back to sleep after stop sending packets -from virtio side.
> > -
> > -Prerequisites
> > -=============
> > -
> > -Modify l3fwd-power example code and recompile::
> > -
> > -        --- a/examples/l3fwd-power/main.c
> > -        +++ b/examples/l3fwd-power/main.c
> > -        @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
> > -                .mq_mode        = ETH_MQ_RX_RSS,
> > -                .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> > -                .split_hdr_size = 0,
> > -        -       .offloads = DEV_RX_OFFLOAD_CHECKSUM,
> > -        },
> > -        .rx_adv_conf = {
> > -                .rss_conf = {
> > -
> > -Test flow
> > -=========
> > -
> > -Virtio-user --> Vhost-user
> > -
> > -Test Case1: Wake up split ring vhost-user core with l3fwd-power
> > sample -
> ==========================================================
> > ============
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > -    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > -    --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=1 -- -i
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > -    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> > -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> > ptype 1 --config "(0,0,2)"
> > -
> > -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> > -
> > -    testpmd>set fwd txonly
> > -    testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user core will sleep
> > and wakeup again.
> > -
> > -Test Case2: Wake up split ring vhost-user cores with l3fwd-power
> > sample when multi queues are enabled -
> > ==========================================================
> > ===========================================
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > -    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > -    --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=4 -- -i --rxq=4 --txq=4 --rss-ip
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > -    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> > --log-level=9 \
> > -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> > ptype 1 \
> > -    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> > -
> > -3. Send packet by testpmd, check vhost-user multi-cores will keep
> > wakeup
> > status::
> > -
> > -    testpmd>set fwd txonly
> > -    testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user cores will sleep
> > and wakeup again.
> > -
> > -Test Case3: Wake up packed ring vhost-user core with l3fwd-power
> > sample -
> ==========================================================
> > =============
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > -    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > -    --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=1,packed_vq=1 -- -i
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > -    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> > -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> > ptype 1 --config "(0,0,2)"
> > -
> > -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> > -
> > -    testpmd>set fwd txonly
> > -    testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user core will sleep
> > and wakeup again.
> > -
> > -Test Case4:  Wake up packed ring vhost-user cores with l3fwd-power
> > sample when multi queues are enabled -
> > ==========================================================
> > =============================================
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > -    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > -    --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > -    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> > --log-level=9 \
> > -    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> > ptype 1 \
> > -    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> > -
> > -3. Send packet by testpmd, check vhost-user multi-cores will keep
> > wakeup
> > status::
> > -
> > -    testpmd>set fwd txonly
> > -    testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user cores will sleep
> > and wakeup again.
> > --
> > 2.25.1
  
Tu, Lijuan Sept. 2, 2020, 3:02 a.m. UTC | #3
> > > Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> > > remove old testplan
> > >
> > > *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> > > test_plans/vhost_user_interrupt_test_plan.rst
> > >
> > > Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
>
> test_plans/vhost_enqueue_interrupt_test_plan.rst: does not exist
> 

Sorry, this comment is for another patch.
Applied.
  

Patch

diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst b/test_plans/vhost_enqueue_interrupt_test_plan.rst
deleted file mode 100644
index ee9b7a5d..00000000
--- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
+++ /dev/null
@@ -1,145 +0,0 @@ 
-.. Copyright (c) <2019>, Intel Corporation
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
-======================================
-vhost enqueue interrupt mode test plan
-======================================
-
-Description
-===========
-
-Vhost enqueue interrupt need test with l3fwd-power sample, small packets send from virtio-user to vhost side,
-check vhost-user cores can be wakeup,and vhost-user cores should be back to sleep after stop sending packets
-from virtio side.
-
-Prerequisites
-=============
-
-Modify l3fwd-power example code and recompile::
-
-        --- a/examples/l3fwd-power/main.c
-        +++ b/examples/l3fwd-power/main.c
-        @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
-                .mq_mode        = ETH_MQ_RX_RSS,
-                .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
-                .split_hdr_size = 0,
-        -       .offloads = DEV_RX_OFFLOAD_CHECKSUM,
-        },
-        .rx_adv_conf = {
-                .rss_conf = {
-
-Test flow
-=========
-
-Virtio-user --> Vhost-user
-
-Test Case1: Wake up split ring vhost-user core with l3fwd-power sample
-======================================================================
-
-1. Launch virtio-user with server mode::
-
-    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
-    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
-    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
-
-3. Send packet by testpmd, check vhost-user core will keep wakeup status::
-
-    testpmd>set fwd txonly
-    testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
-
-Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues are enabled
-=====================================================================================================
-
-1. Launch virtio-user with server mode::
-
-    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
-    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
-    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
-    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
-
-3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
-
-    testpmd>set fwd txonly
-    testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
-
-Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample
-=======================================================================
-
-1. Launch virtio-user with server mode::
-
-    ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
-    ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
-    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
-
-3. Send packet by testpmd, check vhost-user core will keep wakeup status::
-
-    testpmd>set fwd txonly
-    testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
-
-Test Case4:  Wake up packed ring vhost-user cores with l3fwd-power sample when multi queues are enabled
-=======================================================================================================
-
-1. Launch virtio-user with server mode::
-
-    ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
-    --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
-    ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
-    --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
-    --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
-
-3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
-
-    testpmd>set fwd txonly
-    testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.