[v1] test_plans/vhost_virtio_pmd_interrupt_test_plan.rst

Message ID 20200827172459.43152-1-yinan.wang@intel.com (mailing list archive)
State Accepted
Headers
Series [v1] test_plans/vhost_virtio_pmd_interrupt_test_plan.rst |

Commit Message

Wang, Yinan Aug. 27, 2020, 5:24 p.m. UTC
Add cbdma cases in vhost_virtio_pmd_interrupt test plan

Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
 .../vhost_virtio_pmd_interrupt_test_plan.rst  | 103 +++++++++++++++---
 1 file changed, 88 insertions(+), 15 deletions(-)
  

Comments

Tu, Lijuan Sept. 2, 2020, 3:11 a.m. UTC | #1
> Subject: [dts] [PATCH v1] test_plans/vhost_virtio_pmd_interrupt_test_plan.rst
> 
> Add cbdma cases in vhost_virtio_pmd_interrupt test plan
> 
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>

Applied
  

Patch

diff --git a/test_plans/vhost_virtio_pmd_interrupt_test_plan.rst b/test_plans/vhost_virtio_pmd_interrupt_test_plan.rst
index 389d8d8..4f8b6c4 100644
--- a/test_plans/vhost_virtio_pmd_interrupt_test_plan.rst
+++ b/test_plans/vhost_virtio_pmd_interrupt_test_plan.rst
@@ -39,7 +39,6 @@  to virtio-pmd side,check virtio-pmd cores can be wakeup status,and virtio-pm
 sleep status after stop sending packets from traffic generator.This test plan cover virtio 0.95,
 virtio 1.0 and virtio 1.1 test.For packed virtqueue test, need using qemu version > 4.2.0.
 
-
 Prerequisites
 =============
 
@@ -56,23 +55,24 @@  Test Case 1: Basic virtio interrupt test with 4 queues
 1. Bind one NIC port to igb_uio, then launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -c 0x7c -n 4 --socket-mem 1024,1024 --vdev 'net_vhost0,iface=vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
+    ./testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
 
 2. Launch VM1, set queues=4, vectors>=2xqueues+2, mq=on::
 
     taskset -c 34-35 \
     qemu-system-x86_64 -name us-vhost-vm2 \
      -cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-     -smp cores=4,sockets=1 -drive file=/home/osimg/noiommu-ubt16.img \
-     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+     -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+     -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
      -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
      -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=15  \
      -vnc :10 -daemonize
 
 3. Bind virtio port to vfio-pci::
 
-	modprobe vfio enable_unsafe_noiommu_mode=1
-	modprobe vfio-pci
+	  modprobe vfio enable_unsafe_noiommu_mode=1
+	  modprobe vfio-pci
     ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
 
 4. In VM, launch l3fwd-power sample::
@@ -91,15 +91,16 @@  Test Case 2: Basic virtio interrupt test with 16 queues
 1. Bind one NIC port to igb_uio, then launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -c 0x1ffff -n 4 --socket-mem 1024 1024 --vdev 'eth_vhost0,iface=vhost-net,queues=16' -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
+    ./testpmd -c 0x1ffff -n 4 --vdev 'eth_vhost0,iface=vhost-net,queues=16' -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
 
 2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
 
     taskset -c 34-35 \
     qemu-system-x86_64 -name us-vhost-vm2 \
      -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-     -smp cores=16,sockets=1 -drive file=/home/osimg/noiommu-ubt16.img \
-     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
+     -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+     -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
      -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
      -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=40  \
      -vnc :11 -daemonize
@@ -126,15 +127,16 @@  Test Case 3: Basic virtio-1.0 interrupt test with 4 queues
 1. Bind one NIC port to igb_uio, then launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -c 0x7c -n 4 --socket-mem 1024,1024 --vdev 'net_vhost0,iface=vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
+    ./testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
 
 2. Launch VM1, set queues=4, vectors>=2xqueues+2, mq=on::
 
     taskset -c 34-35 \
     qemu-system-x86_64 -name us-vhost-vm2 \
      -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-     -smp cores=4,sockets=1 -drive file=/home/osimg/noiommu-ubt16.img \
-     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
+     -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+     -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
      -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
      -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=15  \
      -vnc :11 -daemonize
@@ -161,15 +163,16 @@  Test Case 4: Packed ring virtio interrupt test with 16 queues
 1. Bind one NIC port to igb_uio, then launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -c 0x1ffff -n 4 --socket-mem 1024 1024 --vdev 'eth_vhost0,iface=vhost-net,queues=16' -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
+    ./testpmd -c 0x1ffff -n 4 --vdev 'eth_vhost0,iface=vhost-net,queues=16' -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
 
 2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
 
     taskset -c 34-35 \
     qemu-system-x86_64 -name us-vhost-vm2 \
      -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-     -smp cores=16,sockets=1 -drive file=/home/osimg/noiommu-ubt16.img \
-     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6005-:22 \
+     -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+     -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
      -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
      -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=40,packed=on  \
      -vnc :11 -daemonize
@@ -189,3 +192,73 @@  Test Case 4: Packed ring virtio interrupt test with 16 queues
 6. Change dest IP address to fixed ip, packets will distribute to 1 queue, check l3fwd-power log that only one related core is waked up.
 
 7. Stop the date transmitter, check all related core will be back to sleep status.
+
+Test Case 5: Basic virtio interrupt test with 16 queues and cbdma enabled
+=========================================================================
+
+1. Bind four cbdma ports and one NIC port to igb_uio, then launch testpmd by below command::
+
+    ./testpmd -c 0x1ffff -n 4 --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7],dmathr=1024' -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
+
+2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
+
+    taskset -c 34-35 \
+    qemu-system-x86_64 -name us-vhost-vm2 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+     -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+     -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
+     -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=40  \
+     -vnc :11 -daemonize
+
+3. Bind virtio port to vfio-pci::
+
+    modprobe vfio enable_unsafe_noiommu_mode=1
+    modprobe vfio-pci
+    ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+
+4. In VM, launch l3fwd-power sample::
+
+    ./l3fwd-power -c 0x0ffff -n 4 --log-level='user1,7' -- -p 1 -P  --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' --no-numa  --parse-ptype
+
+5. Send random dest ip address packets to host nic with packet generator, packets will distribute to all queues, check l3fwd-power log that all related cores are waked up.
+
+6. Change dest IP address to fixed ip, packets will distribute to 1 queue, check l3fwd-power log that only one related core is waked up.
+
+7. Stop the date transmitter, check all related core will be back to sleep status.
+
+Test Case 6: Basic virtio-1.0 interrupt test with 4 queues and cbdma enabled
+============================================================================
+
+1. Bind four cbdma port and one NIC port to igb_uio, then launch testpmd by below command::
+
+    ./testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=4,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3]' -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
+
+2. Launch VM1, set queues=4, vectors>=2xqueues+2, mq=on::
+
+    taskset -c 34-35 \
+    qemu-system-x86_64 -name us-vhost-vm2 \
+     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+     -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
+     -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+     -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+     -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
+     -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=15  \
+     -vnc :11 -daemonize
+
+3. Bind virtio port to vfio-pci::
+
+    modprobe vfio enable_unsafe_noiommu_mode=1
+    modprobe vfio-pci
+    ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+
+4. In VM, launch l3fwd-power sample::
+
+    ./l3fwd-power -c 0xf -n 4 --log-level='user1,7' -- -p 1 -P --config="(0,0,0),(0,1,1),(0,2,2),(0,3,3)" --no-numa --parse-ptype
+
+5. Send random dest ip address packets to host nic with packet generator, packets will distribute to all queues, check l3fwd-power log that all related cores are waked up.
+
+6. Change dest IP address to fixed ip, packets will distribute to 1 queue, check l3fwd-power log that only one related core is waked up.
+
+7. Stop the date transmitter, check all related core will be back to sleep status.
\ No newline at end of file