| Message ID | 20210311153805.1297-1-weix.xie@intel.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [V1] tests/cvl_vf_support_multicast_address: add vlan packet check | expand |
> -----Original Message----- > From: Xie, WeiX > Sent: Thursday, March 11, 2021 11:38 PM > To: dts@dpdk.org > Cc: Xie, WeiX <weix.xie@intel.com> > Subject: [PATCH V1] tests/cvl_vf_support_multicast_address: add vlan > packet check Tested-by: Xie Wei <weix.xie@intel.com>
Acked by Peng, Yuan <yuan.peng@intel.com> -----Original Message----- From: dts <dts-bounces@dpdk.org> On Behalf Of xiewei Sent: Thursday, March 11, 2021 11:38 PM To: dts@dpdk.org Cc: Xie, WeiX <weix.xie@intel.com> Subject: [dts] [PATCH V1] tests/cvl_vf_support_multicast_address: add vlan packet check a) add vlan packet check when set allmulti on b) add a new test case: add vlan filter check when set allmulti off and configured multicast address Signed-off-by: xiewei <weix.xie@intel.com> --- ...tSuite_cvl_vf_support_multicast_address.py | 75 ++++++++++++++++--- 1 file changed, 63 insertions(+), 12 deletions(-) diff --git a/tests/TestSuite_cvl_vf_support_multicast_address.py b/tests/TestSuite_cvl_vf_support_multicast_address.py index 1b148c6c..dd241a82 100644 --- a/tests/TestSuite_cvl_vf_support_multicast_address.py +++ b/tests/TestSuite_cvl_vf_support_multicast_address.py @@ -393,21 +393,23 @@ class TestCvlVfSupportMulticastAdress(TestCase): # send 5 packets pkt1 = 'Ether(dst="%s")/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 - pkt2 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 - pkt3 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_mac - pkt4 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf1_mac - pkt5 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_wrong_mac - pkts = [pkt1, pkt2, pkt3, pkt4, pkt5] + pkt2 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 + pkt3 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkt4 = 'Ether(dst="%s")/Dot1Q(vlan=2)/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkt5 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_mac + pkt6 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf1_mac + pkt7 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_wrong_mac + pkts = [pkt1, pkt2, pkt3, pkt4, pkt5, pkt6, pkt7] p = Packet() for i in pkts: p.append_pkt(i) p.send_pkt(self.tester, tx_port=self.tester_itf) output_1 = self.check_pkts_received() - self.verify(len(output_1) == 6, "Wrong number of pkts received") - self.verify(('0', vf0_mac) in output_1, "pkt3 can't be received by port 0") - self.verify(('1', vf1_mac) in output_1, "pkt4 can't be received by port 1") - self.verify(('0', mul_mac_0) in output_1 and ('0', mul_mac_1) in output_1, "pkt1-2 can't be received by port 0") - self.verify(('1', mul_mac_0) in output_1 and ('1', mul_mac_1) in output_1, "pkt1-2 can't be received by port 1") + self.verify(len(output_1) == 10, "Wrong number of pkts received") + self.verify(('0', vf0_mac) in output_1, "pkt5 can't be received by port 0") + self.verify(('1', vf1_mac) in output_1, "pkt6 can't be received by port 1") + self.verify(('0', mul_mac_0) in output_1 and ('0', mul_mac_1) in output_1, "pkt1-4 can't be received by port 0") + self.verify(('1', mul_mac_0) in output_1 and ('1', mul_mac_1) + in output_1, "pkt1-4 can't be received by port 1") # set allmulti off and promisc on self.pmd_output.execute_cmd("set promisc all on") @@ -416,8 +418,8 @@ class TestCvlVfSupportMulticastAdress(TestCase): p.send_pkt(self.tester, tx_port=self.tester_itf) output_2 = self.check_pkts_received() self.verify(len(output_2) == 6, "Wrong number of pkts received") - self.verify(('0', vf0_mac) in output_2 and ('0', vf1_mac) in output_2 and ('0', vf0_wrong_mac) in output_2, "pkt3-5 can't be received by port 0") - self.verify(('1', vf0_mac) in output_2 and ('1', vf1_mac) in output_2 and ('1', vf0_wrong_mac) in output_2, "pkt3-5 can't be received by port 1") + self.verify(('0', vf0_mac) in output_2 and ('0', vf1_mac) in output_2 and ('0', vf0_wrong_mac) in output_2, "pkt5-7 can't be received by port 0") + self.verify(('1', vf0_mac) in output_2 and ('1', vf1_mac) in + output_2 and ('1', vf0_wrong_mac) in output_2, "pkt5-7 can't be + received by port 1") def test_negative_case(self): # send one packet @@ -469,6 +471,55 @@ class TestCvlVfSupportMulticastAdress(TestCase): output_6 = self.check_pkts_received() self.verify(len(output_6) == 0, "Wrong number of pkts received") + def test_set_vlan_filter_on(self): + # send 4 packets + pkt1 = 'Ether(dst="%s")/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 + pkt2 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 + pkt3 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkt4 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkts = [pkt1, pkt2, pkt3, pkt4] + p = Packet() + for i in pkts: + p.append_pkt(i) + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_1 = self.check_pkts_received() + self.verify(len(out_1) == 0, "pkt1-4 can be received by any + port") + + # configure multicast address + self.pmd_output.execute_cmd("mcast_addr add 0 %s" % mul_mac_0) + self.check_ports_multicast_address_number(1, 0) + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_2 = self.check_pkts_received() + self.verify(len(out_2) == 1, "Wrong number of pkts received") + self.verify(('0', mul_mac_0) in out_2, "pkt1 can't be received + by port 0") + + # set vlan filter on + self.pmd_output.execute_cmd("vlan set filter on 0") + self.pmd_output.execute_cmd("rx_vlan add 1 0") + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_3 = self.check_pkts_received() + self.verify(len(out_3) == 2, "Wrong number of pkts received") + self.verify(('0', mul_mac_0) in out_3, "pkt1-2 can't be received by port 0") + self.verify(('0', mul_mac_1) not in out_3, "other pkt can be + received by port 0") + + # remove the vlan filter + self.pmd_output.execute_cmd("rx_vlan rm 1 0") + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_4 = self.check_pkts_received() + self.verify(len(out_4) == 1, "Wrong number of pkts received") + self.verify(('0', mul_mac_0) in out_4, "pkt1 can't be received + by port 0") + + # remove the multicast address configuration + self.pmd_output.execute_cmd("mcast_addr remove 0 %s" % mul_mac_0) + self.check_ports_multicast_address_number(0, 0) + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_5 = self.check_pkts_received() + self.verify(len(out_5) == 0, "pkt1-4 can be received by any + port") + def tear_down(self): """ Run after each test case. -- 2.17.1
> a) add vlan packet check when set allmulti on > b) add a new test case: add vlan filter check when set allmulti off and configured > multicast address > > Signed-off-by: xiewei <weix.xie@intel.com> Applied, thanks
diff --git a/tests/TestSuite_cvl_vf_support_multicast_address.py b/tests/TestSuite_cvl_vf_support_multicast_address.py index 1b148c6c..dd241a82 100644 --- a/tests/TestSuite_cvl_vf_support_multicast_address.py +++ b/tests/TestSuite_cvl_vf_support_multicast_address.py @@ -393,21 +393,23 @@ class TestCvlVfSupportMulticastAdress(TestCase): # send 5 packets pkt1 = 'Ether(dst="%s")/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 - pkt2 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 - pkt3 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_mac - pkt4 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf1_mac - pkt5 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_wrong_mac - pkts = [pkt1, pkt2, pkt3, pkt4, pkt5] + pkt2 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 + pkt3 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkt4 = 'Ether(dst="%s")/Dot1Q(vlan=2)/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkt5 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_mac + pkt6 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf1_mac + pkt7 = 'Ether(dst="%s")/IP(src="192.168.0.1")/UDP(sport=22,dport=23)/("X"*480)' % vf0_wrong_mac + pkts = [pkt1, pkt2, pkt3, pkt4, pkt5, pkt6, pkt7] p = Packet() for i in pkts: p.append_pkt(i) p.send_pkt(self.tester, tx_port=self.tester_itf) output_1 = self.check_pkts_received() - self.verify(len(output_1) == 6, "Wrong number of pkts received") - self.verify(('0', vf0_mac) in output_1, "pkt3 can't be received by port 0") - self.verify(('1', vf1_mac) in output_1, "pkt4 can't be received by port 1") - self.verify(('0', mul_mac_0) in output_1 and ('0', mul_mac_1) in output_1, "pkt1-2 can't be received by port 0") - self.verify(('1', mul_mac_0) in output_1 and ('1', mul_mac_1) in output_1, "pkt1-2 can't be received by port 1") + self.verify(len(output_1) == 10, "Wrong number of pkts received") + self.verify(('0', vf0_mac) in output_1, "pkt5 can't be received by port 0") + self.verify(('1', vf1_mac) in output_1, "pkt6 can't be received by port 1") + self.verify(('0', mul_mac_0) in output_1 and ('0', mul_mac_1) in output_1, "pkt1-4 can't be received by port 0") + self.verify(('1', mul_mac_0) in output_1 and ('1', mul_mac_1) in output_1, "pkt1-4 can't be received by port 1") # set allmulti off and promisc on self.pmd_output.execute_cmd("set promisc all on") @@ -416,8 +418,8 @@ class TestCvlVfSupportMulticastAdress(TestCase): p.send_pkt(self.tester, tx_port=self.tester_itf) output_2 = self.check_pkts_received() self.verify(len(output_2) == 6, "Wrong number of pkts received") - self.verify(('0', vf0_mac) in output_2 and ('0', vf1_mac) in output_2 and ('0', vf0_wrong_mac) in output_2, "pkt3-5 can't be received by port 0") - self.verify(('1', vf0_mac) in output_2 and ('1', vf1_mac) in output_2 and ('1', vf0_wrong_mac) in output_2, "pkt3-5 can't be received by port 1") + self.verify(('0', vf0_mac) in output_2 and ('0', vf1_mac) in output_2 and ('0', vf0_wrong_mac) in output_2, "pkt5-7 can't be received by port 0") + self.verify(('1', vf0_mac) in output_2 and ('1', vf1_mac) in output_2 and ('1', vf0_wrong_mac) in output_2, "pkt5-7 can't be received by port 1") def test_negative_case(self): # send one packet @@ -469,6 +471,55 @@ class TestCvlVfSupportMulticastAdress(TestCase): output_6 = self.check_pkts_received() self.verify(len(output_6) == 0, "Wrong number of pkts received") + def test_set_vlan_filter_on(self): + # send 4 packets + pkt1 = 'Ether(dst="%s")/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 + pkt2 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.0.0.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_0 + pkt3 = 'Ether(dst="%s")/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkt4 = 'Ether(dst="%s")/Dot1Q(vlan=1)/IP(src="224.192.16.1")/UDP(sport=22,dport=23)/("X"*480)' % mul_mac_1 + pkts = [pkt1, pkt2, pkt3, pkt4] + p = Packet() + for i in pkts: + p.append_pkt(i) + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_1 = self.check_pkts_received() + self.verify(len(out_1) == 0, "pkt1-4 can be received by any port") + + # configure multicast address + self.pmd_output.execute_cmd("mcast_addr add 0 %s" % mul_mac_0) + self.check_ports_multicast_address_number(1, 0) + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_2 = self.check_pkts_received() + self.verify(len(out_2) == 1, "Wrong number of pkts received") + self.verify(('0', mul_mac_0) in out_2, "pkt1 can't be received by port 0") + + # set vlan filter on + self.pmd_output.execute_cmd("vlan set filter on 0") + self.pmd_output.execute_cmd("rx_vlan add 1 0") + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_3 = self.check_pkts_received() + self.verify(len(out_3) == 2, "Wrong number of pkts received") + self.verify(('0', mul_mac_0) in out_3, "pkt1-2 can't be received by port 0") + self.verify(('0', mul_mac_1) not in out_3, "other pkt can be received by port 0") + + # remove the vlan filter + self.pmd_output.execute_cmd("rx_vlan rm 1 0") + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_4 = self.check_pkts_received() + self.verify(len(out_4) == 1, "Wrong number of pkts received") + self.verify(('0', mul_mac_0) in out_4, "pkt1 can't be received by port 0") + + # remove the multicast address configuration + self.pmd_output.execute_cmd("mcast_addr remove 0 %s" % mul_mac_0) + self.check_ports_multicast_address_number(0, 0) + # send 4 packets + p.send_pkt(self.tester, tx_port=self.tester_itf) + out_5 = self.check_pkts_received() + self.verify(len(out_5) == 0, "pkt1-4 can be received by any port") + def tear_down(self): """ Run after each test case.
a) add vlan packet check when set allmulti on b) add a new test case: add vlan filter check when set allmulti off and configured multicast address Signed-off-by: xiewei <weix.xie@intel.com> --- ...tSuite_cvl_vf_support_multicast_address.py | 75 ++++++++++++++++--- 1 file changed, 63 insertions(+), 12 deletions(-)