diff mbox series

[V1,1/4] test_plans/*: modify test plan to adapt meson build

Message ID 20220122182037.921953-2-yux.jiang@intel.com (mailing list archive)
State Accepted
Headers show
Series test_plans/*: modify test plan to adapt meson build | expand

Commit Message

Yu Jiang Jan. 22, 2022, 6:20 p.m. UTC
test_plans/*: modify test plan to adapt meson build

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 test_plans/blocklist_test_plan.rst            |  6 +--
 test_plans/checksum_offload_test_plan.rst     |  2 +-
 .../cloud_filter_with_l4_port_test_plan.rst   |  2 +-
 test_plans/cmdline_test_plan.rst              |  9 +++-
 test_plans/dcf_lifecycle_test_plan.rst        | 52 +++++++++----------
 test_plans/ddp_gtp_qregion_test_plan.rst      |  2 +-
 test_plans/ddp_gtp_test_plan.rst              |  2 +-
 test_plans/ddp_l2tpv3_test_plan.rst           |  2 +-
 test_plans/ddp_mpls_test_plan.rst             |  2 +-
 test_plans/ddp_ppp_l2tp_test_plan.rst         |  2 +-
 test_plans/dual_vlan_test_plan.rst            |  2 +-
 test_plans/dynamic_flowtype_test_plan.rst     |  2 +-
 test_plans/dynamic_queue_test_plan.rst        |  2 +-
 test_plans/eeprom_dump_test_plan.rst          |  2 +-
 test_plans/ethtool_stats_test_plan.rst        | 34 ++++++------
 test_plans/eventdev_pipeline_test_plan.rst    | 24 +++++----
 test_plans/external_memory_test_plan.rst      |  8 +--
 .../external_mempool_handler_test_plan.rst    | 23 ++++----
 test_plans/interrupt_pmd_test_plan.rst        | 15 ++++--
 test_plans/ip_pipeline_test_plan.rst          | 33 +++++++-----
 test_plans/ipgre_test_plan.rst                |  6 +--
 test_plans/ipv4_reassembly_test_plan.rst      | 24 +++++----
 ..._get_extra_queue_information_test_plan.rst |  4 +-
 test_plans/jumboframes_test_plan.rst          |  4 +-
 test_plans/kernelpf_iavf_test_plan.rst        | 12 ++---
 test_plans/kni_test_plan.rst                  | 14 ++---
 test_plans/l2fwd_jobstats_test_plan.rst       | 11 +++-
 27 files changed, 171 insertions(+), 130 deletions(-)
diff mbox series

Patch

diff --git a/test_plans/blocklist_test_plan.rst b/test_plans/blocklist_test_plan.rst
index a284448d..f1231331 100644
--- a/test_plans/blocklist_test_plan.rst
+++ b/test_plans/blocklist_test_plan.rst
@@ -53,7 +53,7 @@  Test Case: Testpmd with no blocklisted device
 Run testpmd in interactive mode and ensure that at least 2 ports
 are bound and available::
 
-  build/testpmd -c 3 -- -i
+  build/app/dpdk-testpmd -c 3 -- -i
   ....
   EAL: unbind kernel driver /sys/bus/pci/devices/0000:01:00.0/driver/unbind
   EAL: Core 1 is ready (tid=357fc700)
@@ -91,7 +91,7 @@  Test Case: Testpmd with one port blocklisted
 
 Select first available port to be blocklisted and specify it with -b option. For the example above::
 
-  build/testpmd -c 3 -b 0000:01:00.0 -- -i
+  build/app/dpdk-testpmd -c 3 -b 0000:01:00.0 -- -i
 
 Check that corresponding device is skipped for binding, and
 only 3 ports are available now:::
@@ -126,7 +126,7 @@  Test Case: Testpmd with all but one port blocklisted
 Blocklist all devices except the last one.
 For the example above:::
 
-  build/testpmd -c 3 -b 0000:01:00.0  -b 0000:01:00.0 -b 0000:02:00.0 -- -i
+  build/app/dpdk-testpmd -c 3 -b 0000:01:00.0  -b 0000:01:00.0 -b 0000:02:00.0 -- -i
 
 Check that 3 corresponding device is skipped for binding, and
 only 1 ports is available now:::
diff --git a/test_plans/checksum_offload_test_plan.rst b/test_plans/checksum_offload_test_plan.rst
index f4b388c4..7b29b1ec 100644
--- a/test_plans/checksum_offload_test_plan.rst
+++ b/test_plans/checksum_offload_test_plan.rst
@@ -92,7 +92,7 @@  to the device under test::
 Assuming that ports ``0`` and ``2`` are connected to a traffic generator,
 launch the ``testpmd`` with the following arguments::
 
-  ./build/app/testpmd -cffffff -n 1 -- -i --burst=1 --txpt=32 \
+  ./build/app/dpdk-testpmd -cffffff -n 1 -- -i --burst=1 --txpt=32 \
   --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=0x5
   enable-rx-cksum
 
diff --git a/test_plans/cloud_filter_with_l4_port_test_plan.rst b/test_plans/cloud_filter_with_l4_port_test_plan.rst
index ed2109eb..e9f226ac 100644
--- a/test_plans/cloud_filter_with_l4_port_test_plan.rst
+++ b/test_plans/cloud_filter_with_l4_port_test_plan.rst
@@ -49,7 +49,7 @@  Prerequisites
     ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:81:00.0
 
 4.Launch the testpmd::
-    ./testpmd -l 0-3 -n 4 -a 81:00.0 --file-prefix=test -- -i --rxq=16 --txq=16 --disable-rss
+    ./build/app/dpdk-testpmd -l 0-3 -n 4 -a 81:00.0 --file-prefix=test -- -i --rxq=16 --txq=16 --disable-rss
     testpmd> set fwd rxonly
     testpmd> set promisc all off
     testpmd> set verbose 1
diff --git a/test_plans/cmdline_test_plan.rst b/test_plans/cmdline_test_plan.rst
index d1499991..70a17b00 100644
--- a/test_plans/cmdline_test_plan.rst
+++ b/test_plans/cmdline_test_plan.rst
@@ -66,9 +66,16 @@  to the device under test::
    modprobe vfio-pci
    usertools/dpdk-devbind.py --bind=vfio-pci device_bus_id
 
+Build dpdk and examples=cmdline:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=cmdline <build_target>
+   ninja -C <build_target>
+
 Launch the ``cmdline`` with 24 logical cores in linuxapp environment::
 
-  $ ./build/app/cmdline -cffffff
+  $ ./build/examples/dpdk-cmdline -cffffff
 
 Test the 3 simple commands in below prompt ::
 
diff --git a/test_plans/dcf_lifecycle_test_plan.rst b/test_plans/dcf_lifecycle_test_plan.rst
index 4c010e76..2c8628f2 100644
--- a/test_plans/dcf_lifecycle_test_plan.rst
+++ b/test_plans/dcf_lifecycle_test_plan.rst
@@ -102,7 +102,7 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=vf -- -i
 
 Expected: VF get DCF mode. There are outputs in testpmd launching ::
 
@@ -128,8 +128,8 @@  Set a VF as trust on each PF ::
 Launch dpdk on the VF on each PF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:11.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf1 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-15 -n 4 -a 18:11.0,cap=dcf --file-prefix=dcf2 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf1 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-15 -n 4 -a 18:11.0,cap=dcf --file-prefix=dcf2 -- -i
 
 Expected: VF get DCF mode. There are outputs in each testpmd launching ::
 
@@ -152,7 +152,7 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.1
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.1,cap=dcf --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.1,cap=dcf --file-prefix=vf -- -i
 
 Expected: VF can NOT get DCF mode. testpmd should provide a friendly output ::
 
@@ -180,7 +180,7 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=vf -- -i
 
 Expected: VF can NOT get DCF mode. testpmd should provide a friendly output ::
 
@@ -208,11 +208,11 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Launch another testpmd on the VF1, and start mac forward ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf -- -i
     set verbose 1
     set fwd mac
     start
@@ -260,11 +260,11 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Launch another testpmd on the VF1, and start mac forward ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf -- -i
     set verbose 1
     set fwd mac
     start
@@ -309,11 +309,11 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Launch another testpmd on the VF1, and start mac forward ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf -- -i
     set verbose 1
     set fwd mac
     start
@@ -360,11 +360,11 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Launch another testpmd on the DCF ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-14 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf2 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf2 -- -i
 
 Expect: the second testpmd can't be launched
 
@@ -385,16 +385,16 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Launch another testpmd on the VF1 and VF2, and start mac forward ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf1 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 --file-prefix=vf1 -- -i
     set verbose 1
     set fwd mac
     start
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 15-16 -n 4 -a 18:01.2 --file-prefix=vf2 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 15-16 -n 4 -a 18:01.2 --file-prefix=vf2 -- -i
     set verbose 1
     set fwd mac
     start
@@ -453,11 +453,11 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Launch another testpmd on the VF1, and start mac forward ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 11-14 -n 4 -a 18:01.1 -a 18:01.2 --file-prefix=vf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 -a 18:01.2 --file-prefix=vf -- -i
     set verbose 1
     set fwd mac
     start
@@ -549,7 +549,7 @@  Set ADQ on PF ::
 Try to launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Expect: testpmd can't be launched. PF should reject DCF mode.
 
@@ -565,7 +565,7 @@  Remove ADQ on PF ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Expect: testpmd can launch successfully. DCF mode can be grant ::
 
@@ -589,7 +589,7 @@  Set a VF as trust ::
 Launch dpdk on the VF, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Set ADQ on PF ::
 
@@ -629,7 +629,7 @@  Set a VF as trust ::
 Launch dpdk on the VF0 on PF1, request DCF mode ::
 
     ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
 
 Set ADQ on PF2 ::
 
@@ -973,7 +973,7 @@  TC31: add ACL rule by kernel, reject request for DCF functionality
 
 3. launch testpmd on VF0 requesting for DCF funtionality::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
 
    report error::
 
@@ -1015,7 +1015,7 @@  TC32: add ACL rule by kernel, accept request for DCF functionality of another PF
 
 3. launch testpmd on VF0 of PF0 requesting for DCF funtionality successfully::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
 
    show the port info::
 
@@ -1032,7 +1032,7 @@  TC33: ACL DCF mode is active, add ACL filters by way of host based configuration
 
 2. launch testpmd on VF0 of PF0 requesting for DCF funtionality successfully::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
 
    show the port info::
 
@@ -1061,7 +1061,7 @@  TC34: ACL DCF mode is active, add ACL filters by way of host based configuration
 
 2. launch testpmd on VF0 of PF0 requesting for DCF funtionality successfully::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc -n 4 -a 18:01.0,cap=dcf --log-level=ice,7 -- -i --port-topology=loop
 
    show the port info::
 
diff --git a/test_plans/ddp_gtp_qregion_test_plan.rst b/test_plans/ddp_gtp_qregion_test_plan.rst
index 596f4855..7e2b1816 100644
--- a/test_plans/ddp_gtp_qregion_test_plan.rst
+++ b/test_plans/ddp_gtp_qregion_test_plan.rst
@@ -86,7 +86,7 @@  Prerequisites
    --pkt-filter-mode=perfect on testpmd to enable flow director. In general, 
    PF's max queue is 64::
 
-    ./testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect 
+    ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect
     --port-topology=chained --txq=64 --rxq=64
 
 
diff --git a/test_plans/ddp_gtp_test_plan.rst b/test_plans/ddp_gtp_test_plan.rst
index ed5139bc..0fd5a50d 100644
--- a/test_plans/ddp_gtp_test_plan.rst
+++ b/test_plans/ddp_gtp_test_plan.rst
@@ -82,7 +82,7 @@  Prerequisites
    port topology mode, add txq/rxq to enable multi-queues. In general, PF's 
    max queue is 64, VF's max queue is 4::
 
-    ./testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect --port-topology=chained --tx-offloads=0x8fff --txq=64 --rxq=64  
+    ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --pkt-filter-mode=perfect --port-topology=chained --tx-offloads=0x8fff --txq=64 --rxq=64
 
 
 Test Case: Load dynamic device personalization 
diff --git a/test_plans/ddp_l2tpv3_test_plan.rst b/test_plans/ddp_l2tpv3_test_plan.rst
index 8262da35..d4ae0f55 100644
--- a/test_plans/ddp_l2tpv3_test_plan.rst
+++ b/test_plans/ddp_l2tpv3_test_plan.rst
@@ -100,7 +100,7 @@  any DDP functionality*
 
 5. Start the TESTPMD::
 
-    ./x86_64-native-linuxapp-gcc/build/app/test-pmd/testpmd -c f -n 4 -a
+    ./<build>/app/dpdk-testpmd -c f -n 4 -a
     <PCI address of device> -- -i --port-topology=chained --txq=64 --rxq=64
     --pkt-filter-mode=perfect
 
diff --git a/test_plans/ddp_mpls_test_plan.rst b/test_plans/ddp_mpls_test_plan.rst
index d76934c1..6c4d0e01 100644
--- a/test_plans/ddp_mpls_test_plan.rst
+++ b/test_plans/ddp_mpls_test_plan.rst
@@ -70,7 +70,7 @@  Prerequisites
    enable multi-queues. In general, PF's max queue is 64, VF's max queue
    is 4::
 
-     ./testpmd -c f -n 4 -- -i --port-topology=chained --tx-offloads=0x8fff
+     ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --tx-offloads=0x8fff
      --txq=4 --rxq=4
 
 
diff --git a/test_plans/ddp_ppp_l2tp_test_plan.rst b/test_plans/ddp_ppp_l2tp_test_plan.rst
index 8f51ff20..3f9c53b7 100644
--- a/test_plans/ddp_ppp_l2tp_test_plan.rst
+++ b/test_plans/ddp_ppp_l2tp_test_plan.rst
@@ -109,7 +109,7 @@  Prerequisites
    --pkt-filter-mode=perfect on testpmd to enable flow director. In general,
    PF's max queue is 64::
 
-    ./testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
+    ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
     --pkt-filter-mode=perfect
 
 Load/delete dynamic device personalization
diff --git a/test_plans/dual_vlan_test_plan.rst b/test_plans/dual_vlan_test_plan.rst
index 9955ef5d..a7e03bcc 100644
--- a/test_plans/dual_vlan_test_plan.rst
+++ b/test_plans/dual_vlan_test_plan.rst
@@ -56,7 +56,7 @@  to the device under test::
 Assuming that ports ``0`` and ``1`` are connected to the traffic generator's port ``A`` and ``B``,
 launch the ``testpmd`` with the following arguments::
 
-  ./build/app/testpmd -c ffffff -n 3 -- -i --burst=1 --txpt=32 \
+  ./<build>/app/dpdk-testpmd -c ffffff -n 3 -- -i --burst=1 --txpt=32 \
       --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=0x3
 
 The -n command is used to select the number of memory channels. It should match the number of memory channels on that setup.
diff --git a/test_plans/dynamic_flowtype_test_plan.rst b/test_plans/dynamic_flowtype_test_plan.rst
index 1acf60c8..5fda715e 100644
--- a/test_plans/dynamic_flowtype_test_plan.rst
+++ b/test_plans/dynamic_flowtype_test_plan.rst
@@ -87,7 +87,7 @@  Prerequisites
 2. Start testpmd on host, set chained port topology mode, add txq/rxq to 
    enable multi-queues. In general, PF's max queue is 64::
 
-    ./testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
+    ./<build>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --txq=64 --rxq=64
 	 
 3. Set rxonly forwarding and enable output
 
diff --git a/test_plans/dynamic_queue_test_plan.rst b/test_plans/dynamic_queue_test_plan.rst
index 6be6ec74..dc1d350a 100644
--- a/test_plans/dynamic_queue_test_plan.rst
+++ b/test_plans/dynamic_queue_test_plan.rst
@@ -79,7 +79,7 @@  Prerequisites
 2. Start testpmd on host, set chained port topology mode, add txq/rxq to 
    enable multi-queues::
    
-    ./testpmd -c 0xf -n 4  -- -i --port-topology=chained --txq=64 --rxq=64
+    ./<build>/app/dpdk-testpmd -c 0xf -n 4  -- -i --port-topology=chained --txq=64 --rxq=64
 
 
 Test Case: Rx queue setup at runtime
diff --git a/test_plans/eeprom_dump_test_plan.rst b/test_plans/eeprom_dump_test_plan.rst
index 3b169c39..3923f3fc 100644
--- a/test_plans/eeprom_dump_test_plan.rst
+++ b/test_plans/eeprom_dump_test_plan.rst
@@ -54,7 +54,7 @@  to the device under test::
 Assuming that ports are up and working, then launch the ``testpmd`` application
 with the following arguments::
 
-   ./build/app/testpmd -- -i --portmask=0x3
+   ./<build>/app/dpdk-testpmd -- -i --portmask=0x3
 
 Test Case : EEPROM Dump
 =======================
diff --git a/test_plans/ethtool_stats_test_plan.rst b/test_plans/ethtool_stats_test_plan.rst
index 95f9e7a6..7947b68d 100644
--- a/test_plans/ethtool_stats_test_plan.rst
+++ b/test_plans/ethtool_stats_test_plan.rst
@@ -74,7 +74,7 @@  bind two ports::
 Test Case: xstat options
 ------------------------
 
-check ``dpdk-procinfo`` tool support ``xstats`` command options.
+check ``dpdk-proc-info`` tool support ``xstats`` command options.
 
 These options should be included::
 
@@ -87,17 +87,17 @@  steps:
 
 #. boot up ``testpmd``::
 
-    ./<target name>/app/testpmd -c 0x3 -n 4  -- -i --port-topology=loop
+    ./<target name>/app/dpdk-testpmd -c 0x3 -n 4  -- -i --port-topology=loop
 
     testpmd> set fwd io
     testpmd> clear port xstats all
     testpmd> start
 
-#. run ``dpdk-procinfo`` tool::
+#. run ``dpdk-proc-info`` tool::
 
-    ./<target name>/app/dpdk-procinfo
+    ./<target name>/app/dpdk-proc-info
 
-#. check ``dpdk-procinfo`` tool output should contain upper options.
+#. check ``dpdk-proc-info`` tool output should contain upper options.
 
 Test Case: xstat statistic integrity
 ------------------------------------
@@ -108,7 +108,7 @@  steps:
 
 #. boot up ``testpmd``::
 
-    ./<target name>/app/testpmd -c 0x3 -n 4  -- -i --port-topology=loop
+    ./<target name>/app/dpdk-testpmd -c 0x3 -n 4  -- -i --port-topology=loop
 
     testpmd> set fwd io
     testpmd> clear port xstats all
@@ -118,11 +118,11 @@  steps:
 
     sendp([Ether()/IP()/UDP()/Raw('\0'*60)], iface=<port 0 name>)
 
-#. run ``dpdk-procinfo`` tool with ``xstats`` option and check if all ports
+#. run ``dpdk-proc-info`` tool with ``xstats`` option and check if all ports
    extended statistics can access by xstat name or xstat id::
 
-    ./<target name>/app/dpdk-procinfo -- -p 3 --xstats-id <N>
-    ./<target name>/app/dpdk-procinfo -- -p 3 --xstats-name <statistic name>
+    ./<target name>/app/dpdk-proc-info -- -p 3 --xstats-id <N>
+    ./<target name>/app/dpdk-proc-info -- -p 3 --xstats-name <statistic name>
 
 Test Case: xstat-reset command
 ------------------------------
@@ -133,7 +133,7 @@  steps:
 
 #. boot up ``testpmd``::
 
-    ./<target name>/app/testpmd -c 0x3 -n 4  -- -i --port-topology=loop
+    ./<target name>/app/dpdk-testpmd -c 0x3 -n 4  -- -i --port-topology=loop
 
     testpmd> set fwd io
     testpmd> clear port xstats all
@@ -143,10 +143,10 @@  steps:
 
     sendp([Ether()/IP()/UDP()/Raw('\0'*60)], iface=<port 0 name>)
 
-#. run ``dpdk-procinfo`` tool with ``xstats-reset`` option and check if all port
+#. run ``dpdk-proc-info`` tool with ``xstats-reset`` option and check if all port
    statistics have been cleared::
 
-    ./<target name>/app/dpdk-procinfo -- -p 3 --xstats-reset
+    ./<target name>/app/dpdk-proc-info -- -p 3 --xstats-reset
 
 Test Case: xstat single statistic
 ---------------------------------
@@ -158,7 +158,7 @@  steps:
 
 #. boot up ``testpmd``::
 
-    ./<target name>/app/testpmd -c 0x3 -n 4  -- -i --port-topology=loop
+    ./<target name>/app/dpdk-testpmd -c 0x3 -n 4  -- -i --port-topology=loop
 
     testpmd> set fwd io
     testpmd> clear port xstats all
@@ -172,14 +172,14 @@  steps:
 
     testpmd> show port xstats all
 
-#. run ``dpdk-procinfo`` tool with ``xstats-id`` option to get the statistic
+#. run ``dpdk-proc-info`` tool with ``xstats-id`` option to get the statistic
    name corresponding with the index id::
 
-    ./<target name>/app/dpdk-procinfo -- -p 3 --xstats-id 0,1,...N
+    ./<target name>/app/dpdk-proc-info -- -p 3 --xstats-id 0,1,...N
 
-#. run ``dpdk-procinfo`` tool with ``xstats-name`` option to get the statistic
+#. run ``dpdk-proc-info`` tool with ``xstats-name`` option to get the statistic
    data corresponding with the statistic name::
 
-    ./<target name>/app/dpdk-procinfo -- -p 3 --xstats-name <statistic name>
+    ./<target name>/app/dpdk-proc-info -- -p 3 --xstats-name <statistic name>
 
 #. compare these proc info tool xstat values with testpmd xstat values.
\ No newline at end of file
diff --git a/test_plans/eventdev_pipeline_test_plan.rst b/test_plans/eventdev_pipeline_test_plan.rst
index 866eae72..4e4498d4 100644
--- a/test_plans/eventdev_pipeline_test_plan.rst
+++ b/test_plans/eventdev_pipeline_test_plan.rst
@@ -36,6 +36,12 @@  Eventdev Pipeline SW PMD Tests
 
 Prerequisites
 ==============
+Build dpdk and examples=eventdev_pipeline
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=eventdev_pipeline <build_target>
+   ninja -C <build_target>
 
 Test Case: Keep the packets order with default stage in single-flow and multi-flow
 ====================================================================================
@@ -43,7 +49,7 @@  Description: the packets' order which will pass through a same flow should be gu
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -D
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -D
 
     Parameters:
     -r2, -t4, -e8: allocate cores to rx, tx and shedular
@@ -62,7 +68,7 @@  Description: the sample only guarantee that keep the packets order with only one
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -o -D
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -o -D
 
 2. Send traffic from ixia device with same 5 tuple(single-link) and with different 5-tuple(multi-flow)
 
@@ -75,7 +81,7 @@  in single-flow, the load-balanced behavior is not guaranteed;
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -D
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -D
 
 2. Use traffic generator to send huge number of packets:
 In single-flow situation, traffic generator will send packets with the same 5-tuple
@@ -90,7 +96,7 @@  Description: A good load-balanced behavior should be guaranteed in both single-f
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -o -D
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -o -D
 
 2. Use traffic generator to send huge number of packets:
 In single-flow situation, traffic generator will send packets with the same 5-tuple
@@ -105,7 +111,7 @@  Description: A good load-balanced behavior should be guaranteed in both single-f
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -p -D
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32 -W1000 -p -D
 
 2. Use traffic generator to send huge number of packets:
 In single-flow situation, traffic generator will send packets with the same 5-tuple
@@ -121,7 +127,7 @@  We use 4 worker and 2 stage as the test background.
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s2 -n0 -c32
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s2 -n0 -c32
 
 2. use traffic generator to send huge number of packets(with same 5-tuple and different 5-tuple)
 
@@ -134,7 +140,7 @@  We use 4 worker and 2 stage as the test background.
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s2 -n0 -c32 -p
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s2 -n0 -c32 -p
 
 2. use traffic generator to send huge number of packets(with same 5-tuple and different 5-tuple)
 
@@ -147,7 +153,7 @@  We use 4 worker and 2 stage as the test background.
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s2 -n0 -c32 -o
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s2 -n0 -c32 -o
 
 2. use traffic generator to send huge number of packets(with same 5-tuple and different 5-tuple)
 
@@ -159,6 +165,6 @@  Description: Execute basic forward test with all type of stage.
 
 1. Run the sample with below command::
 
-    # ./build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32
+    # ./<build_target>/examples/dpdk-eventdev_pipeline /build/eventdev_pipeline --vdev event_sw0 -- -r2 -t4 -e8 -w F0 -s1 -n0 -c32
 
 2. use traffic generator to send some packets and verify the sample could forward them normally
diff --git a/test_plans/external_memory_test_plan.rst b/test_plans/external_memory_test_plan.rst
index 42f57726..7109e337 100644
--- a/test_plans/external_memory_test_plan.rst
+++ b/test_plans/external_memory_test_plan.rst
@@ -46,7 +46,7 @@  Bind the ports to IGB_UIO driver
 
 Start testpmd with --mp-alloc=xmem flag::
 
-   ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- --mp-alloc=xmem -i
+   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -- --mp-alloc=xmem -i
 
 Start forward in testpmd
 
@@ -60,7 +60,7 @@  Bind the ports to IGB_UIO driver
 
 Start testpmd with --mp-alloc=xmemhuge flag::
 
-   ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- --mp-alloc=xmemhuge -i
+   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -- --mp-alloc=xmemhuge -i
 
 Start forward in testpmd
 
@@ -73,7 +73,7 @@  Bind the ports to vfio-pci driver
 
 Start testpmd with --mp-alloc=xmem flag::
 
-   ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- --mp-alloc=xmem -i
+   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -- --mp-alloc=xmem -i
 
 Start forward in testpmd
 
@@ -86,7 +86,7 @@  Bind the ports to vfio-pci driver
 
 Start testpmd with --mp-alloc=xmemhuge flag::
 
-   ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- --mp-alloc=xmemhuge -i
+   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -- --mp-alloc=xmemhuge -i
 
 Start forward in testpmd
 
diff --git a/test_plans/external_mempool_handler_test_plan.rst b/test_plans/external_mempool_handler_test_plan.rst
index 09ed4ca9..2f821364 100644
--- a/test_plans/external_mempool_handler_test_plan.rst
+++ b/test_plans/external_mempool_handler_test_plan.rst
@@ -42,13 +42,14 @@  systems and software based memory allocators to be used with DPDK.
 Test Case 1: Multiple producers and multiple consumers
 ======================================================
 
-1. Change default mempool handler operations to "ring_mp_mc"::
+1. Default mempool handler operations is "ring_mp_mc"::
 
-      sed -i 's/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=.*$/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=\"ring_mp_mc\"/' ./config/common_base
+      cat /root/dpdk/config/rte_config.h |grep MEMPOOL_OPS
+      #define RTE_MBUF_DEFAULT_MEMPOOL_OPS "ring_mp_mc"
 
 2. Start test app and verify mempool autotest passed::
 
-      test -n 4 -c f
+      ./<build_target>/app/test/dpdk-test -n 4 -c f
       RTE>> mempool_autotest
 
 3. Start testpmd with two ports and start forwarding::
@@ -65,11 +66,11 @@  Test Case 2: Single producer and Single consumer
 
 1. Change default mempool operation to "ring_sp_sc"::
 
-      sed -i 's/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=.*$/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=\"ring_sp_sc\"/' ./config/common_base
+      sed -i '$a\#define RTE_MBUF_DEFAULT_MEMPOOL_OPS \"ring_sp_sc\"' config/rte_config.h
 
 2. Start test app and verify mempool autotest passed::
 
-      test -n 4 -c f
+      ./<build_target>/app/test/dpdk-test -n 4 -c f
       RTE>> mempool_autotest
 
 3. Start testpmd with two ports and start forwarding::
@@ -86,11 +87,11 @@  Test Case 3: Single producer and Multiple consumers
 
 1. Change default mempool operation to "ring_sp_mc"::
 
-      sed -i 's/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=.*$/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=\"ring_sp_mc\"/' ./config/common_base
+      sed -i '$a\#define RTE_MBUF_DEFAULT_MEMPOOL_OPS \"ring_sp_mc\"' config/rte_config.h
 
 2. Start test app and verify mempool autotest passed::
 
-      test -n 4 -c f
+      ./<build_target>/app/test/dpdk-test -n 4 -c f
       RTE>> mempool_autotest
 
 3. Start testpmd with two ports and start forwarding::
@@ -107,11 +108,11 @@  Test Case 4: Multiple producers and single consumer
 
 1. Change default mempool operation to "ring_mp_sc"::
 
-      sed -i 's/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=.*$/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=\"ring_mp_sc\"/' ./config/common_base
+      sed -i '$a\#define RTE_MBUF_DEFAULT_MEMPOOL_OPS \"ring_mp_sc\"' config/rte_config.h
 
 2. Start test app and verify mempool autotest passed::
 
-      test -n 4 -c f
+      ./<build_target>/app/test/dpdk-test -n 4 -c f
       RTE>> mempool_autotest
 
 3. Start testpmd with two ports and start forwarding::
@@ -128,11 +129,11 @@  Test Case 4: Stack mempool handler
 
 1. Change default mempool operation to "stack"::
 
-      sed -i 's/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=.*$/CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS=\"stack\"/' ./config/common_base
+      sed -i '$a\#define RTE_MBUF_DEFAULT_MEMPOOL_OPS \"stack\"' config/rte_config.h
 
 2. Start test app and verify mempool autotest passed::
 
-      test -n 4 -c f
+      ./<build_target>/app/test/dpdk-test -n 4 -c f
       RTE>> mempool_autotest
 
 3. Start testpmd with two ports and start forwarding::
diff --git a/test_plans/interrupt_pmd_test_plan.rst b/test_plans/interrupt_pmd_test_plan.rst
index cb8b2f19..c89d68e2 100644
--- a/test_plans/interrupt_pmd_test_plan.rst
+++ b/test_plans/interrupt_pmd_test_plan.rst
@@ -60,12 +60,19 @@  Iommu pass through feature has been enabled in kernel::
 Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-d
 in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
 
+Build dpdk and examples=l3fwd-power:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=l3fwd-power <build_target>
+   ninja -C <build_target>
+
 Test Case1: PF interrupt pmd with different queue
 =================================================
 
 Run l3fwd-power with one queue per port::
 
-    l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+    ./<build_target>/examples/dpdk-l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
 
 Send one packet to Port0 and Port1, check that thread on core1 and core2
 waked up::
@@ -85,7 +92,7 @@  keep up awake.
 
 Run l3fwd-power with random number queue per port, if is 4::
 
-    l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
+    ./<build_target>/examples/dpdk-l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
        (0,2,2),(0,3,3),(0,4,4)"
 
 Send packet with increased dest IP to Port0, check that all threads waked up
@@ -95,7 +102,7 @@  keep up awake.
 
 Run l3fwd-power with 15 queues per port::
 
-    l3fwd-power -c 0xffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+    ./<build_target>/examples/dpdk-l3fwd-power -c 0xffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
         (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
         (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)"
 
@@ -109,7 +116,7 @@  Test Case2: PF lsc interrupt with vfio
 
 Run l3fwd-power with one queue per port::
 
-    l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+    ./<build_target>/examples/dpdk-l3fwd-power -c 0x7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
 
 Plug out Port0 cable, check that link down interrupt captured and handled by
 pmd driver.
diff --git a/test_plans/ip_pipeline_test_plan.rst b/test_plans/ip_pipeline_test_plan.rst
index 1c774e3c..5452bc90 100644
--- a/test_plans/ip_pipeline_test_plan.rst
+++ b/test_plans/ip_pipeline_test_plan.rst
@@ -76,6 +76,13 @@  Change pci device id of LINK0 to pci device id of dut_port_0.
 There are two drivers supported now: aesni_gcm and aesni_mb.
 Different drivers support different Algorithms.
 
+Build dpdk and examples=ip_pipeline:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=ip_pipeline <build_target>
+   ninja -C <build_target>
+
 Test Case: l2fwd pipeline
 ===========================
 1. Edit examples/ip_pipeline/examples/l2fwd.cli,
@@ -84,7 +91,7 @@  Test Case: l2fwd pipeline
 
 2. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 -- -s examples/l2fwd.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 -- -s examples/l2fwd.cli
 
 3. Send packets at tester side with scapy, verify:
 
@@ -99,7 +106,7 @@  Test Case: flow classification pipeline
 
 2. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 –- -s examples/flow.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 –- -s examples/flow.cli
 
 3. Send following packets with one test port::
 
@@ -121,7 +128,7 @@  Test Case: routing pipeline
 
 2. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 –- -s examples/route.cli,
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 –- -s examples/route.cli,
 
 3. Send following packets with one test port::
 
@@ -143,7 +150,7 @@  Test Case: firewall pipeline
 
 2. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 –- -s examples/firewall.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 –- -s examples/firewall.cli
 
 3. Send following packets with one test port::
 
@@ -164,7 +171,7 @@  Test Case: pipeline with tap
 
 2. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 –- -s examples/tap.cli,
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 –- -s examples/tap.cli,
 
 3. Send packets at tester side with scapy, verify
    packets sent from tester_port_0 can be received at tester_port_1, and vice versa.
@@ -178,7 +185,7 @@  Test Case: traffic management pipeline
 
 3. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 -a 0000:81:00.0 -- -s examples/traffic_manager.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 -a 0000:81:00.0 -- -s examples/traffic_manager.cli
 
 4. Config traffic with dst ipaddr increase from 0.0.0.0 to 15.255.0.0, total 4096 streams,
    also config flow tracked-by dst ipaddr, verify each flow's throughput is about linerate/4096.
@@ -191,7 +198,7 @@  Test Case: RSS pipeline
 
 2. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x1f -n 4 –- -s examples/rss.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x1f -n 4 –- -s examples/rss.cli
 
 3. Send following packets with one test port::
 
@@ -220,7 +227,7 @@  Test Case: vf l2fwd pipeline(pf bound to dpdk driver)
 
 2. Start testpmd with the four pf ports::
 
-    ./testpmd -c 0xf0 -n 4 -a 05:00.0 -a 05:00.1 -a 05:00.2 -a 05:00.3 --file-prefix=pf --socket-mem 1024,1024 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 05:00.0 -a 05:00.1 -a 05:00.2 -a 05:00.3 --file-prefix=pf --socket-mem 1024,1024 -- -i
 
    Set vf mac address from pf port::
 
@@ -235,7 +242,7 @@  Test Case: vf l2fwd pipeline(pf bound to dpdk driver)
 
 4. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 -a 0000:05:02.0 -a 0000:05:06.0 \
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 -a 0000:05:02.0 -a 0000:05:06.0 \
     -a 0000:05:0a.0 -a 0000:05:0e.0 --file-prefix=vf --socket-mem 1024,1024 -- -s examples/vf.cli
 
    The exact format of port allowlist: domain:bus:devid:func
@@ -290,7 +297,7 @@  Test Case: vf l2fwd pipeline(pf bound to kernel driver)
 
 4. Run ip_pipeline app as the following::
 
-    ./build/ip_pipeline -c 0x3 -n 4 -- -s examples/vf.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -c 0x3 -n 4 -- -s examples/vf.cli
 
 5. Send packets at tester side with scapy::
 
@@ -331,7 +338,7 @@  Test Case: crypto pipeline - AEAD algorithm in aesni_gcm
 
 4. Run ip_pipeline app as the following::
 
-    ./examples/ip_pipeline/build/ip_pipeline -a 0000:81:00.0 --vdev crypto_aesni_gcm0
+    ./<build_target>/examples/dpdk-ip_pipeline -a 0000:81:00.0 --vdev crypto_aesni_gcm0
     --socket-mem 0,2048 -l 23,24,25 -- -s ./examples/ip_pipeline/examples/flow_crypto.cli
 
 5. Send packets with IXIA port,
@@ -365,7 +372,7 @@  Test Case: crypto pipeline - cipher algorithm in aesni_mb
 
 4. Run ip_pipeline app as the following::
 
-    ./examples/ip_pipeline/build/ip_pipeline -a 0000:81:00.0 --vdev crypto_aesni_mb0 --socket-mem 0,2048 -l 23,24,25 -- -s ./examples/ip_pipeline/examples/flow_crypto.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -a 0000:81:00.0 --vdev crypto_aesni_mb0 --socket-mem 0,2048 -l 23,24,25 -- -s ./examples/ip_pipeline/examples/flow_crypto.cli
 
 5. Send packets with IXIA port,
    Use a tool to caculate the ciphertext from plaintext and key as an expected value.
@@ -395,7 +402,7 @@  Test Case: crypto pipeline - cipher_auth algorithm in aesni_mb
 
 4. Run ip_pipeline app as the following::
 
-    ./examples/ip_pipeline/build/ip_pipeline -a 0000:81:00.0 --vdev crypto_aesni_mb0 --socket-mem 0,2048 -l 23,24,25 -- -s ./examples/ip_pipeline/examples/flow_crypto.cli
+    ./<build_target>/examples/dpdk-ip_pipeline -a 0000:81:00.0 --vdev crypto_aesni_mb0 --socket-mem 0,2048 -l 23,24,25 -- -s ./examples/ip_pipeline/examples/flow_crypto.cli
 
 5. Send packets with IXIA port,
    Use a tool to caculate the ciphertext from plaintext and cipher key with AES-CBC algorithm.
diff --git a/test_plans/ipgre_test_plan.rst b/test_plans/ipgre_test_plan.rst
index 3a466b75..2c652273 100644
--- a/test_plans/ipgre_test_plan.rst
+++ b/test_plans/ipgre_test_plan.rst
@@ -48,7 +48,7 @@  Test Case 1: GRE ipv4 packet detect
 
 Start testpmd and enable rxonly forwarding mode::
 
-    testpmd -c ffff -n 4 -- -i
+    ./<build_target>/app/dpdk-testpmd -c ffff -n 4 -- -i
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -77,7 +77,7 @@  Test Case 2: GRE ipv6 packet detect
 
 Start testpmd and enable rxonly forwarding mode::
 
-    testpmd -c ffff -n 4 -- -i --enable-hw-vlan
+    ./<build_target>/app/dpdk-testpmd -c ffff -n 4 -- -i --enable-hw-vlan
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -124,7 +124,7 @@  Test Case 4: GRE packet chksum offload
 
 Start testpmd with hardware checksum offload enabled::
 
-    testpmd -c ff -n 3 -- -i --enable-rx-cksum  --port-topology=loop
+    ./<build_target>/app/dpdk-testpmd -c ff -n 3 -- -i --enable-rx-cksum  --port-topology=loop
     testpmd> set verbose 1
     testpmd> set fwd csum
     testpmd> csum set ip hw 0
diff --git a/test_plans/ipv4_reassembly_test_plan.rst b/test_plans/ipv4_reassembly_test_plan.rst
index 75aba16e..354dae51 100644
--- a/test_plans/ipv4_reassembly_test_plan.rst
+++ b/test_plans/ipv4_reassembly_test_plan.rst
@@ -56,13 +56,19 @@  to the device under test::
 1x Intel® 82599 (Niantic) NICs (1x 10GbE full duplex optical ports per NIC)
 plugged into the available PCIe Gen2 8-lane slots.
 
+Build dpdk and examples=ip_reassembly:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=ip_reassembly <build_target>
+   ninja -C <build_target>
 
 Test Case: Send 1K packets, 4 fragments each and 1K maxflows
 ============================================================
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=10s
 
 Sends 1K packets split in 4 fragments each with a ``maxflows`` of 1K.
@@ -79,7 +85,7 @@  Test Case: Send 2K packets, 4 fragments each and 1K maxflows
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=10s
 
 Sends 2K packets split in 4 fragments each with a ``maxflows`` of 1K.
@@ -96,7 +102,7 @@  Test Case: Send 4K packets, 7 fragments each and 4K maxflows
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=4096 --flowttl=10s
 
 Modifies the sample app source code to enable up to 7 fragments per packet,
@@ -116,7 +122,7 @@  Test Case: Send +1K packets and ttl 3s; wait +ttl; send 1K packets
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=3s
 
 Sends 1100 packets split in 4 fragments each.
@@ -142,7 +148,7 @@  Test Case: Send more packets than maxflows; only maxflows packets are forwarded
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1023 --flowttl=5s
 
 Sends 1K packets with ``maxflows`` equal to 1023.
@@ -175,7 +181,7 @@  Test Case: Send more fragments than supported
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=10s
 
 Sends 1 packet split in 5 fragments while the maximum number of supported
@@ -194,7 +200,7 @@  Test Case: Send 3 frames and delay the 4th; no frames are forwarded back
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=3s
 
 Creates 1 packet split in 4 fragments. Sends the first 3 fragments and waits
@@ -213,7 +219,7 @@  Test Case: Send jumbo frames
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=10s --enable-jumbo --max-pkt-len=9500
 
 Sets the NIC MTU to 9000 and sends 1K packets of 8900B split in 4 fragments of
@@ -232,7 +238,7 @@  Test Case: Send jumbo frames without enable them in the app
 
 Sample command::
 
-  ./examples/ip_reassembly/build/ip_reassembly -c 0x2 -n 4 -- \
+  ./<build_target>/examples/dpdk-ip_reassembly -c 0x2 -n 4 -- \
       -P -p 0x2 --config "(1,0,1)" --maxflows=1024 --flowttl=10s
 
 Sends jumbo packets in the same way the previous test case does but without
diff --git a/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst b/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
index 146f04bb..07c67e76 100644
--- a/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
+++ b/test_plans/ixgbe_vf_get_extra_queue_information_test_plan.rst
@@ -89,7 +89,7 @@  Test case 1: DPDK PF, kernel VF, enable DCB mode with TC=4
 
 1. start the testpmd on PF::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=16    
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=16
     testpmd> port stop 0
     testpmd> port config 0 dcb vt on 4 pfc off
     testpmd> port start 0
@@ -135,7 +135,7 @@  Test case 2: DPDK PF, kernel VF, disable DCB mode
 
 1. start the testpmd on PF::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=2 --txq=2 --nb-cores=16
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=2 --txq=2 --nb-cores=16
 
 2. check if VF port is linked. if vf port is down, up the port::
 
diff --git a/test_plans/jumboframes_test_plan.rst b/test_plans/jumboframes_test_plan.rst
index a713ee5d..65287cd1 100644
--- a/test_plans/jumboframes_test_plan.rst
+++ b/test_plans/jumboframes_test_plan.rst
@@ -59,7 +59,7 @@  Assuming that ports ``0`` and ``1`` of the test target are directly connected
 to the traffic generator, launch the ``testpmd`` application with the following
 arguments::
 
-  ./build/app/testpmd -c ffffff -n 6 -- -i --portmask=0x3 --max-pkt-len=9600 \
+  ./<build_target>/app/dpdk-testpmd -c ffffff -n 6 -- -i --portmask=0x3 --max-pkt-len=9600 \
   --tx-offloads=0x00008000
 
 The -n command is used to select the number of memory channels. It should match the number of memory channels on that setup.
@@ -179,7 +179,7 @@  Test Case: Normal frames with jumbo frame support
 
 Start testpmd with jumbo frame support enabled ::
 
-  ./testpmd -c ffffff -n 3 -- -i --rxd=1024 --txd=1024 \
+  ./<build_target>/app/dpdk-testpmd -c ffffff -n 3 -- -i --rxd=1024 --txd=1024 \
   --burst=144 --txpt=32 --txht=8 --txwt=8 --txfreet=0 --rxfreet=64 \
   --mbcache=200 --portmask=0x3 --mbuf-size=2048 --max-pkt-len=9600
 
diff --git a/test_plans/kernelpf_iavf_test_plan.rst b/test_plans/kernelpf_iavf_test_plan.rst
index 72223c77..45c217e4 100644
--- a/test_plans/kernelpf_iavf_test_plan.rst
+++ b/test_plans/kernelpf_iavf_test_plan.rst
@@ -72,7 +72,7 @@  Bind VF device to igb_uio or vfio-pci
 
 Start up VF port::
 
-    ./testpmd -c f -n 4 -- -i
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i
 
 Test case: VF basic RX/TX
 =========================
@@ -345,7 +345,7 @@  Ensure tester's port supports sending jumboframe::
 
 Launch testpmd for VF port without enabling jumboframe option::
 
-    ./testpmd -c f -n 4 -- -i
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i
 
     testpmd> set fwd mac
     testpmd> start
@@ -363,7 +363,7 @@  Ensure tester's port supports sending jumboframe::
 
 Launch testpmd for VF port with jumboframe option::
 
-    ./testpmd -c f -n 4 -- -i --max-pkt-len=3000
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --max-pkt-len=3000
 
     testpmd> set fwd mac
     testpmd> start
@@ -380,7 +380,7 @@  Test case: VF RSS
 
 Start command with multi-queues like below::
 
-   ./testpmd -c f -n 4 -- -i --txq=4 --rxq=4
+   ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --txq=4 --rxq=4
 
 Show RSS RETA configuration::
 
@@ -424,7 +424,7 @@  Test case: VF RSS hash key
 
 Start command with multi-queues like below::
 
-   ./testpmd -c f -n 4 -- -i --txq=4 --rxq=4
+   ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --txq=4 --rxq=4
 
 Show port rss hash key::
 
@@ -518,7 +518,7 @@  Change mtu for large packet::
 Launch the ``testpmd`` with the following arguments, add "--max-pkt-len"
 for large packet::
 
-   ./testpmd -c f -n 4 -- -i --port-topology=chained --max-pkt-len=9000
+   ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --max-pkt-len=9000
 
 Set csum forward::
 
diff --git a/test_plans/kni_test_plan.rst b/test_plans/kni_test_plan.rst
index 1d4736bb..1802f6ab 100644
--- a/test_plans/kni_test_plan.rst
+++ b/test_plans/kni_test_plan.rst
@@ -117,7 +117,7 @@  system to another)::
     rmmod igb_uio
     insmod ./x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
     insmod ./x86_64-default-linuxapp-gcc/kmod/rte_kni.ko
-    ./examples/kni/build/app/kni -c 0xa0001e -n 4 -- -P -p 0x3 --config="(0,1,2,21),(1,3,4,23)" &
+    ./<build_target>/examples/dpdk-kni -c 0xa0001e -n 4 -- -P -p 0x3 --config="(0,1,2,21),(1,3,4,23)" &
 
 Case config::
 
@@ -133,7 +133,7 @@  to write to NIC, threads 21 and 23 are used by the kernel.
 As the kernel module is installed using ``"kthread_mode=single"`` the core
 affinity is set using ``taskset``::
 
-    ./build/app/kni -c 0xa0001e -n 4 -- -P -p 0xc --config="(2,1,2,21),(3,3,4,23)"
+    ./<build_target>/examples/dpdk-kni -c 0xa0001e -n 4 -- -P -p 0xc --config="(2,1,2,21),(3,3,4,23)"
 
 
 Verify whether the interface has been added::
@@ -379,7 +379,7 @@  Assume that ``port 2 and 3`` are used by this application::
 
     rmmod kni
     insmod ./kmod/rte_kni.ko "lo_mode=lo_mode_ring_skb"
-    ./build/app/kni -c 0xff -n 3 -- -p 0xf -i 0xf -o 0xf0
+    ./<build_target>/examples/dpdk-kni -c 0xff -n 3 -- -p 0xf -i 0xf -o 0xf0
 
 Assume ``port A and B`` on tester connects to NIC ``port 2 and 3``.
 
@@ -407,7 +407,7 @@  successfully::
 
         rmmod rte_kni
         insmod ./kmod/rte_kni.ko <Changing Parameters>
-         ./build/app/kni -c 0xa0001e -n 4 -- -P -p 0xc --config="(2,1,2,21),(3,3,4,23)"
+         ./<build_target>/examples/dpdk-kni -c 0xa0001e -n 4 -- -P -p 0xc --config="(2,1,2,21),(3,3,4,23)"
 
 
 Using ``dmesg`` to check whether kernel module is loaded with the specified
@@ -437,7 +437,7 @@  Compare performance results for loopback mode using:
 
     insmod ./x86_64-default-linuxapp-gcc/kmod/igb_uio.ko
     insmod ./x86_64-default-linuxapp-gcc/kmod/rte_kni.ko <lo_mode and kthread_mode parameters>
-    ./examples/kni/build/app/kni -c <Core mask> -n 4 -- -P -p <Port mask> --config="<Ports/Cores configuration>" &
+    ./<build_target>/examples/dpdk-kni -c <Core mask> -n 4 -- -P -p <Port mask> --config="<Ports/Cores configuration>" &
 
 
 At this point, the throughput is measured and recorded for the different
@@ -474,7 +474,7 @@  Compare performance results for bridge mode using:
 The application is launched and the bridge is setup using the commands below::
 
     insmod ./x86_64-default-linuxapp-gcc/kmod/rte_kni.ko <kthread_mode parameter>
-    ./build/app/kni -c <Core mask> -n 4 -- -P -p <Port mask> --config="<Ports/Cores configuration>" &
+    ./<build_target>/examples/dpdk-kni -c <Core mask> -n 4 -- -P -p <Port mask> --config="<Ports/Cores configuration>" &
 
     ifconfig vEth2_0 up
     ifconfig vEth3_0 up
@@ -560,7 +560,7 @@  The application is launched and the bridge is setup using the commands below::
     echo 1 > /proc/sys/net/ipv4/ip_forward
 
     insmod ./x86_64-default-linuxapp-gcc/kmod/rte_kni.ko <kthread_mode parameter>
-    ./build/app/kni -c <Core mask> -n 4 -- -P -p <Port mask> --config="<Ports/Cores configuration>" &
+    ./<build_target>/examples/dpdk-kni -c <Core mask> -n 4 -- -P -p <Port mask> --config="<Ports/Cores configuration>" &
 
     ifconfig vEth2_0 192.170.2.1
     ifconfig vEth3_0 192.170.3.1
diff --git a/test_plans/l2fwd_jobstats_test_plan.rst b/test_plans/l2fwd_jobstats_test_plan.rst
index ba5a53f2..585f853a 100644
--- a/test_plans/l2fwd_jobstats_test_plan.rst
+++ b/test_plans/l2fwd_jobstats_test_plan.rst
@@ -64,7 +64,7 @@  note: If using vfio the kernel must be >= 3.6+ and VT-d must be enabled in bios.
 
 The application requires a number of command line options::
 
-    ./build/l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l]
+    ./<build_target>/examples/dpdk-l2fwd-jobstats [EAL options] -- -p PORTMASK [-q NQ] [-l]
 
 The ``l2fwd-jobstats`` application is run with EAL parameters and parameters for
 the application itself. For details about the EAL parameters, see the relevant
@@ -75,6 +75,13 @@  itself.
 - q NQ: A number of queues (=ports) per lcore (default is 1)
 - l: Use locale thousands separator when formatting big numbers.
 
+Build dpdk and examples=l2fwd-jobstats:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=l2fwd-jobstats <build_target>
+   ninja -C <build_target>
+
 Test Case: L2fwd jobstats check
 ================================================
 
@@ -82,7 +89,7 @@  Assume port 0 and 1 are connected to the traffic generator, to run the test
 application in linuxapp environment with 2 lcores, 2 ports and 2 RX queues
 per lcore::
 
-    ./examples/l2fwd-jobstats/build/l2fwd-jobstats -c 0x03 -n 4  -- -q 2 -p 0x03 -l
+    ./<build_target>/examples/dpdk-l2fwd-jobstats -c 0x03 -n 4  -- -q 2 -p 0x03 -l
 
 Then send 100, 000 packet to port 0 and 100, 000 packets to port 1, check the
 NIC packets number reported by sample is the same with what we set at the packet