@@ -780,6 +780,15 @@ F: drivers/common/idpf/
F: doc/guides/nics/idpf.rst
F: doc/guides/nics/features/idpf.ini
+Intel cpfl
+M: Qi Zhang <qi.z.zhang@intel.com>
+M: Jingjing Wu <jingjing.wu@intel.com>
+M: Beilei Xing <beilei.xing@intel.com>
+T: git://dpdk.org/next/dpdk-next-net-intel
+F: drivers/net/cpfl/
+F: doc/guides/nics/cpfl.rst
+F: doc/guides/nics/features/cpfl.ini
+
Intel igc
M: Junfeng Guo <junfeng.guo@intel.com>
M: Simei Su <simei.su@intel.com>
new file mode 100644
@@ -0,0 +1,66 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2022 Intel Corporation.
+
+.. include:: <isonum.txt>
+
+CPFL Poll Mode Driver
+=====================
+
+The [*EXPERIMENTAL*] cpfl PMD (**librte_net_cpfl**) provides poll mode driver support
+for Intel\ |reg| Infrastructure Processing Unit (Intel\ |reg| IPU) E2100.
+
+
+Linux Prerequisites
+-------------------
+
+Follow the DPDK :doc:`../linux_gsg/index` to setup the basic DPDK environment.
+
+To get better performance on Intel platforms,
+please follow the :doc:`../linux_gsg/nic_perf_intel_platform`.
+
+
+Pre-Installation Configuration
+------------------------------
+
+Runtime Config Options
+~~~~~~~~~~~~~~~~~~~~~~
+
+- ``vport`` (default ``0``)
+
+ The PMD supports creation of multiple vports for one PCI device,
+ each vport corresponds to a single ethdev.
+ The user can specify the vports with specific ID to be created, for example::
+
+ -a ca:00.0,vport=[0,2,3]
+
+ Then the PMD will create 3 vports (ethdevs) for device ``ca:00.0``.
+
+ If the parameter is not provided, the vport 0 will be created by default.
+
+- ``rx_single`` (default ``0``)
+
+ There are two queue modes supported by Intel\ |reg| IPU Ethernet ES2000 Series,
+ single queue mode and split queue mode for Rx queue.
+ User can choose Rx queue mode, example::
+
+ -a ca:00.0,rx_single=1
+
+ Then the PMD will configure Rx queue with single queue mode.
+ Otherwise, split queue mode is chosen by default.
+
+- ``tx_single`` (default ``0``)
+
+ There are two queue modes supported by Intel\ |reg| IPU Ethernet ES2000 Series,
+ single queue mode and split queue mode for Tx queue.
+ User can choose Tx queue mode, example::
+
+ -a ca:00.0,tx_single=1
+
+ Then the PMD will configure Tx queue with single queue mode.
+ Otherwise, split queue mode is chosen by default.
+
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :doc:`build_and_test` for details.
\ No newline at end of file
new file mode 100644
@@ -0,0 +1,12 @@
+;
+; Supported features of the 'cpfl' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+; A feature with "P" indicates only be supported when non-vector path
+; is selected.
+;
+[Features]
+Linux = Y
+x86-32 = Y
+x86-64 = Y
@@ -55,6 +55,11 @@ New Features
Also, make sure to start the actual text at the margin.
=======================================================
+* **Added Intel cpfl driver.**
+
+ Added the new ``cpfl`` net driver
+ for Intel\ |reg| Infrastructure Processing Unit (Intel\ |reg| IPU) E2100.
+ See the :doc:`../nics/cpfl` NIC guide for more details on this new driver.
Removed Items
-------------
new file mode 100644
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ */
+
+#include <rte_atomic.h>
+#include <rte_eal.h>
+#include <rte_ether.h>
+#include <rte_malloc.h>
+#include <rte_memzone.h>
+#include <rte_dev.h>
+#include <errno.h>
+#include <rte_alarm.h>
+
+#include "cpfl_ethdev.h"
+
+#define CPFL_TX_SINGLE_Q "tx_single"
+#define CPFL_RX_SINGLE_Q "rx_single"
+#define CPFL_VPORT "vport"
+
+rte_spinlock_t cpfl_adapter_lock;
+/* A list for all adapters, one adapter matches one PCI device */
+struct cpfl_adapter_list cpfl_adapter_list;
+bool cpfl_adapter_list_init;
+
+static const char * const cpfl_valid_args[] = {
+ CPFL_TX_SINGLE_Q,
+ CPFL_RX_SINGLE_Q,
+ CPFL_VPORT,
+ NULL
+};
+
+static int
+cpfl_dev_link_update(struct rte_eth_dev *dev,
+ __rte_unused int wait_to_complete)
+{
+ struct idpf_vport *vport = dev->data->dev_private;
+ struct rte_eth_link new_link;
+
+ memset(&new_link, 0, sizeof(new_link));
+
+ switch (vport->link_speed) {
+ case 10:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_10M;
+ break;
+ case 100:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_100M;
+ break;
+ case 1000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_1G;
+ break;
+ case 10000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_10G;
+ break;
+ case 20000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_20G;
+ break;
+ case 25000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_25G;
+ break;
+ case 40000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_40G;
+ break;
+ case 50000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_50G;
+ break;
+ case 100000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_100G;
+ break;
+ case 200000:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_200G;
+ break;
+ default:
+ new_link.link_speed = RTE_ETH_SPEED_NUM_NONE;
+ }
+
+ new_link.link_duplex = RTE_ETH_LINK_FULL_DUPLEX;
+ new_link.link_status = vport->link_up ? RTE_ETH_LINK_UP :
+ RTE_ETH_LINK_DOWN;
+ new_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ RTE_ETH_LINK_SPEED_FIXED);
+
+ return rte_eth_linkstatus_set(dev, &new_link);
+}
+
+static int
+cpfl_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ struct idpf_vport *vport = dev->data->dev_private;
+ struct idpf_adapter *adapter = vport->adapter;
+
+ dev_info->max_rx_queues = adapter->caps.max_rx_q;
+ dev_info->max_tx_queues = adapter->caps.max_tx_q;
+ dev_info->min_rx_bufsize = CPFL_MIN_BUF_SIZE;
+ dev_info->max_rx_pktlen = CPFL_MAX_FRAME_SIZE;
+
+ dev_info->max_mtu = dev_info->max_rx_pktlen - CPFL_ETH_OVERHEAD;
+ dev_info->min_mtu = RTE_ETHER_MIN_MTU;
+
+ return 0;
+}
+
+static const uint32_t *
+cpfl_dev_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
+{
+ static const uint32_t ptypes[] = {
+ RTE_PTYPE_L2_ETHER,
+ RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
+ RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
+ RTE_PTYPE_L4_FRAG,
+ RTE_PTYPE_L4_UDP,
+ RTE_PTYPE_L4_TCP,
+ RTE_PTYPE_L4_SCTP,
+ RTE_PTYPE_L4_ICMP,
+ RTE_PTYPE_UNKNOWN
+ };
+
+ return ptypes;
+}
+
+static int
+cpfl_dev_configure(struct rte_eth_dev *dev)
+{
+ struct rte_eth_conf *conf = &dev->data->dev_conf;
+
+ if (conf->link_speeds & RTE_ETH_LINK_SPEED_FIXED) {
+ PMD_INIT_LOG(ERR, "Setting link speed is not supported");
+ return -ENOTSUP;
+ }
+
+ if (conf->txmode.mq_mode != RTE_ETH_MQ_TX_NONE) {
+ PMD_INIT_LOG(ERR, "Multi-queue TX mode %d is not supported",
+ conf->txmode.mq_mode);
+ return -ENOTSUP;
+ }
+
+ if (conf->lpbk_mode != 0) {
+ PMD_INIT_LOG(ERR, "Loopback operation mode %d is not supported",
+ conf->lpbk_mode);
+ return -ENOTSUP;
+ }
+
+ if (conf->dcb_capability_en != 0) {
+ PMD_INIT_LOG(ERR, "Priority Flow Control(PFC) if not supported");
+ return -ENOTSUP;
+ }
+
+ if (conf->intr_conf.lsc != 0) {
+ PMD_INIT_LOG(ERR, "LSC interrupt is not supported");
+ return -ENOTSUP;
+ }
+
+ if (conf->intr_conf.rxq != 0) {
+ PMD_INIT_LOG(ERR, "RXQ interrupt is not supported");
+ return -ENOTSUP;
+ }
+
+ if (conf->intr_conf.rmv != 0) {
+ PMD_INIT_LOG(ERR, "RMV interrupt is not supported");
+ return -ENOTSUP;
+ }
+
+ return 0;
+}
+
+static int
+cpfl_dev_close(struct rte_eth_dev *dev)
+{
+ struct idpf_vport *vport = dev->data->dev_private;
+ struct cpfl_adapter_ext *adapter = CPFL_ADAPTER_TO_EXT(vport->adapter);
+
+ idpf_vport_deinit(vport);
+
+ adapter->cur_vports &= ~RTE_BIT32(vport->devarg_id);
+ adapter->cur_vport_nb--;
+ dev->data->dev_private = NULL;
+ adapter->vports[vport->sw_idx] = NULL;
+ rte_free(vport);
+
+ return 0;
+}
+
+static int
+insert_value(struct cpfl_devargs *devargs, uint16_t id)
+{
+ uint16_t i;
+
+ /* ignore duplicate */
+ for (i = 0; i < devargs->req_vport_nb; i++) {
+ if (devargs->req_vports[i] == id)
+ return 0;
+ }
+
+ if (devargs->req_vport_nb >= RTE_DIM(devargs->req_vports)) {
+ PMD_INIT_LOG(ERR, "Total vport number can't be > %d",
+ CPFL_MAX_VPORT_NUM);
+ return -EINVAL;
+ }
+
+ devargs->req_vports[devargs->req_vport_nb] = id;
+ devargs->req_vport_nb++;
+
+ return 0;
+}
+
+static const char *
+parse_range(const char *value, struct cpfl_devargs *devargs)
+{
+ uint16_t lo, hi, i;
+ int n = 0;
+ int result;
+ const char *pos = value;
+
+ result = sscanf(value, "%hu%n-%hu%n", &lo, &n, &hi, &n);
+ if (result == 1) {
+ if (lo >= CPFL_MAX_VPORT_NUM)
+ return NULL;
+ if (insert_value(devargs, lo) != 0)
+ return NULL;
+ } else if (result == 2) {
+ if (lo > hi || hi >= CPFL_MAX_VPORT_NUM)
+ return NULL;
+ for (i = lo; i <= hi; i++) {
+ if (insert_value(devargs, i) != 0)
+ return NULL;
+ }
+ } else {
+ return NULL;
+ }
+
+ return pos + n;
+}
+
+static int
+parse_vport(const char *key, const char *value, void *args)
+{
+ struct cpfl_devargs *devargs = args;
+ const char *pos = value;
+
+ devargs->req_vport_nb = 0;
+
+ if (*pos == '[')
+ pos++;
+
+ while (1) {
+ pos = parse_range(pos, devargs);
+ if (pos == NULL) {
+ PMD_INIT_LOG(ERR, "invalid value:\"%s\" for key:\"%s\", ",
+ value, key);
+ return -EINVAL;
+ }
+ if (*pos != ',')
+ break;
+ pos++;
+ }
+
+ if (*value == '[' && *pos != ']') {
+ PMD_INIT_LOG(ERR, "invalid value:\"%s\" for key:\"%s\", ",
+ value, key);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+parse_bool(const char *key, const char *value, void *args)
+{
+ int *i = args;
+ char *end;
+ int num;
+
+ errno = 0;
+
+ num = strtoul(value, &end, 10);
+
+ if (errno == ERANGE || (num != 0 && num != 1)) {
+ PMD_INIT_LOG(ERR, "invalid value:\"%s\" for key:\"%s\", value must be 0 or 1",
+ value, key);
+ return -EINVAL;
+ }
+
+ *i = num;
+ return 0;
+}
+
+static int
+cpfl_parse_devargs(struct rte_pci_device *pci_dev, struct cpfl_adapter_ext *adapter,
+ struct cpfl_devargs *cpfl_args)
+{
+ struct rte_devargs *devargs = pci_dev->device.devargs;
+ struct rte_kvargs *kvlist;
+ int i, ret;
+
+ cpfl_args->req_vport_nb = 0;
+
+ if (devargs == NULL)
+ return 0;
+
+ kvlist = rte_kvargs_parse(devargs->args, cpfl_valid_args);
+ if (kvlist == NULL) {
+ PMD_INIT_LOG(ERR, "invalid kvargs key");
+ return -EINVAL;
+ }
+
+ /* check parsed devargs */
+ if (adapter->cur_vport_nb + cpfl_args->req_vport_nb >
+ CPFL_MAX_VPORT_NUM) {
+ PMD_INIT_LOG(ERR, "Total vport number can't be > %d",
+ CPFL_MAX_VPORT_NUM);
+ ret = -EINVAL;
+ goto bail;
+ }
+
+ for (i = 0; i < cpfl_args->req_vport_nb; i++) {
+ if (adapter->cur_vports & RTE_BIT32(cpfl_args->req_vports[i])) {
+ PMD_INIT_LOG(ERR, "Vport %d has been created",
+ cpfl_args->req_vports[i]);
+ ret = -EINVAL;
+ goto bail;
+ }
+ }
+
+ ret = rte_kvargs_process(kvlist, CPFL_VPORT, &parse_vport,
+ cpfl_args);
+ if (ret != 0)
+ goto bail;
+
+ ret = rte_kvargs_process(kvlist, CPFL_TX_SINGLE_Q, &parse_bool,
+ &adapter->base.txq_model);
+ if (ret != 0)
+ goto bail;
+
+ ret = rte_kvargs_process(kvlist, CPFL_RX_SINGLE_Q, &parse_bool,
+ &adapter->base.rxq_model);
+ if (ret != 0)
+ goto bail;
+
+bail:
+ rte_kvargs_free(kvlist);
+ return ret;
+}
+
+static struct idpf_vport *
+cpfl_find_vport(struct cpfl_adapter_ext *adapter, uint32_t vport_id)
+{
+ struct idpf_vport *vport = NULL;
+ int i;
+
+ for (i = 0; i < adapter->cur_vport_nb; i++) {
+ vport = adapter->vports[i];
+ if (vport->vport_id != vport_id)
+ continue;
+ else
+ return vport;
+ }
+
+ return vport;
+}
+
+static void
+cpfl_handle_event_msg(struct idpf_vport *vport, uint8_t *msg, uint16_t msglen)
+{
+ struct virtchnl2_event *vc_event = (struct virtchnl2_event *)msg;
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)vport->dev;
+
+ if (msglen < sizeof(struct virtchnl2_event)) {
+ PMD_DRV_LOG(ERR, "Error event");
+ return;
+ }
+
+ switch (vc_event->event) {
+ case VIRTCHNL2_EVENT_LINK_CHANGE:
+ PMD_DRV_LOG(DEBUG, "VIRTCHNL2_EVENT_LINK_CHANGE");
+ vport->link_up = vc_event->link_status;
+ vport->link_speed = vc_event->link_speed;
+ cpfl_dev_link_update(dev, 0);
+ break;
+ default:
+ PMD_DRV_LOG(ERR, " unknown event received %u", vc_event->event);
+ break;
+ }
+}
+
+static void
+cpfl_handle_virtchnl_msg(struct cpfl_adapter_ext *adapter_ex)
+{
+ struct idpf_adapter *adapter = &adapter_ex->base;
+ struct idpf_dma_mem *dma_mem = NULL;
+ struct idpf_hw *hw = &adapter->hw;
+ struct virtchnl2_event *vc_event;
+ struct idpf_ctlq_msg ctlq_msg;
+ enum idpf_mbx_opc mbx_op;
+ struct idpf_vport *vport;
+ enum virtchnl_ops vc_op;
+ uint16_t pending = 1;
+ int ret;
+
+ while (pending) {
+ ret = idpf_ctlq_recv(hw->arq, &pending, &ctlq_msg);
+ if (ret) {
+ PMD_DRV_LOG(INFO, "Failed to read msg from virtual channel, ret: %d", ret);
+ return;
+ }
+
+ rte_memcpy(adapter->mbx_resp, ctlq_msg.ctx.indirect.payload->va,
+ IDPF_DFLT_MBX_BUF_SIZE);
+
+ mbx_op = rte_le_to_cpu_16(ctlq_msg.opcode);
+ vc_op = rte_le_to_cpu_32(ctlq_msg.cookie.mbx.chnl_opcode);
+ adapter->cmd_retval = rte_le_to_cpu_32(ctlq_msg.cookie.mbx.chnl_retval);
+
+ switch (mbx_op) {
+ case idpf_mbq_opc_send_msg_to_peer_pf:
+ if (vc_op == VIRTCHNL2_OP_EVENT) {
+ if (ctlq_msg.data_len < sizeof(struct virtchnl2_event)) {
+ PMD_DRV_LOG(ERR, "Error event");
+ return;
+ }
+ vc_event = (struct virtchnl2_event *)adapter->mbx_resp;
+ vport = cpfl_find_vport(adapter_ex, vc_event->vport_id);
+ if (!vport) {
+ PMD_DRV_LOG(ERR, "Can't find vport.");
+ return;
+ }
+ cpfl_handle_event_msg(vport, adapter->mbx_resp,
+ ctlq_msg.data_len);
+ } else {
+ if (vc_op == adapter->pend_cmd)
+ notify_cmd(adapter, adapter->cmd_retval);
+ else
+ PMD_DRV_LOG(ERR, "command mismatch, expect %u, get %u",
+ adapter->pend_cmd, vc_op);
+
+ PMD_DRV_LOG(DEBUG, " Virtual channel response is received,"
+ "opcode = %d", vc_op);
+ }
+ goto post_buf;
+ default:
+ PMD_DRV_LOG(DEBUG, "Request %u is not supported yet", mbx_op);
+ }
+ }
+
+post_buf:
+ if (ctlq_msg.data_len)
+ dma_mem = ctlq_msg.ctx.indirect.payload;
+ else
+ pending = 0;
+
+ ret = idpf_ctlq_post_rx_buffs(hw, hw->arq, &pending, &dma_mem);
+ if (ret && dma_mem)
+ idpf_free_dma_mem(hw, dma_mem);
+}
+
+static void
+cpfl_dev_alarm_handler(void *param)
+{
+ struct cpfl_adapter_ext *adapter = param;
+
+ cpfl_handle_virtchnl_msg(adapter);
+
+ rte_eal_alarm_set(CPFL_ALARM_INTERVAL, cpfl_dev_alarm_handler, adapter);
+}
+
+static int
+cpfl_adapter_ext_init(struct rte_pci_device *pci_dev, struct cpfl_adapter_ext *adapter)
+{
+ struct idpf_adapter *base = &adapter->base;
+ struct idpf_hw *hw = &base->hw;
+ int ret = 0;
+
+ hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
+ hw->hw_addr_len = pci_dev->mem_resource[0].len;
+ hw->back = base;
+ hw->vendor_id = pci_dev->id.vendor_id;
+ hw->device_id = pci_dev->id.device_id;
+ hw->subsystem_vendor_id = pci_dev->id.subsystem_vendor_id;
+
+ strncpy(adapter->name, pci_dev->device.name, PCI_PRI_STR_SIZE);
+
+ ret = idpf_adapter_init(base);
+ if (ret != 0) {
+ PMD_INIT_LOG(ERR, "Failed to init adapter");
+ goto err_adapter_init;
+ }
+
+ rte_eal_alarm_set(CPFL_ALARM_INTERVAL, cpfl_dev_alarm_handler, adapter);
+
+ adapter->max_vport_nb = adapter->base.caps.max_vports;
+
+ adapter->vports = rte_zmalloc("vports",
+ adapter->max_vport_nb *
+ sizeof(*adapter->vports),
+ 0);
+ if (adapter->vports == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to allocate vports memory");
+ ret = -ENOMEM;
+ goto err_get_ptype;
+ }
+
+ adapter->cur_vports = 0;
+ adapter->cur_vport_nb = 0;
+
+ adapter->used_vecs_num = 0;
+
+ return ret;
+
+err_get_ptype:
+ idpf_adapter_deinit(base);
+err_adapter_init:
+ return ret;
+}
+
+static const struct eth_dev_ops cpfl_eth_dev_ops = {
+ .dev_configure = cpfl_dev_configure,
+ .dev_close = cpfl_dev_close,
+ .dev_infos_get = cpfl_dev_info_get,
+ .link_update = cpfl_dev_link_update,
+ .dev_supported_ptypes_get = cpfl_dev_supported_ptypes_get,
+};
+
+static uint16_t
+cpfl_vport_idx_alloc(struct cpfl_adapter_ext *ad)
+{
+ uint16_t vport_idx;
+ uint16_t i;
+
+ for (i = 0; i < ad->max_vport_nb; i++) {
+ if (ad->vports[i] == NULL)
+ break;
+ }
+
+ if (i == ad->max_vport_nb)
+ vport_idx = CPFL_INVALID_VPORT_IDX;
+ else
+ vport_idx = i;
+
+ return vport_idx;
+}
+
+static int
+cpfl_dev_vport_init(struct rte_eth_dev *dev, void *init_params)
+{
+ struct idpf_vport *vport = dev->data->dev_private;
+ struct cpfl_vport_param *param = init_params;
+ struct cpfl_adapter_ext *adapter = param->adapter;
+ /* for sending create vport virtchnl msg prepare */
+ struct virtchnl2_create_vport create_vport_info;
+ int ret = 0;
+
+ dev->dev_ops = &cpfl_eth_dev_ops;
+ vport->adapter = &adapter->base;
+ vport->sw_idx = param->idx;
+ vport->devarg_id = param->devarg_id;
+ vport->dev = dev;
+
+ memset(&create_vport_info, 0, sizeof(create_vport_info));
+ ret = idpf_create_vport_info_init(vport, &create_vport_info);
+ if (ret != 0) {
+ PMD_INIT_LOG(ERR, "Failed to init vport req_info.");
+ goto err;
+ }
+
+ ret = idpf_vport_init(vport, &create_vport_info, dev->data);
+ if (ret != 0) {
+ PMD_INIT_LOG(ERR, "Failed to init vports.");
+ goto err;
+ }
+
+ adapter->vports[param->idx] = vport;
+ adapter->cur_vports |= RTE_BIT32(param->devarg_id);
+ adapter->cur_vport_nb++;
+
+ dev->data->mac_addrs = rte_zmalloc(NULL, RTE_ETHER_ADDR_LEN, 0);
+ if (dev->data->mac_addrs == NULL) {
+ PMD_INIT_LOG(ERR, "Cannot allocate mac_addr memory.");
+ ret = -ENOMEM;
+ goto err_mac_addrs;
+ }
+
+ rte_ether_addr_copy((struct rte_ether_addr *)vport->default_mac_addr,
+ &dev->data->mac_addrs[0]);
+
+ return 0;
+
+err_mac_addrs:
+ adapter->vports[param->idx] = NULL; /* reset */
+ idpf_vport_deinit(vport);
+err:
+ return ret;
+}
+
+static const struct rte_pci_id pci_id_cpfl_map[] = {
+ { RTE_PCI_DEVICE(IDPF_INTEL_VENDOR_ID, IDPF_DEV_ID_CPF) },
+ { .vendor_id = 0, /* sentinel */ },
+};
+
+static struct cpfl_adapter_ext *
+cpfl_find_adapter_ext(struct rte_pci_device *pci_dev)
+{
+ struct cpfl_adapter_ext *adapter;
+ int found = 0;
+
+ if (pci_dev == NULL)
+ return NULL;
+
+ rte_spinlock_lock(&cpfl_adapter_lock);
+ TAILQ_FOREACH(adapter, &cpfl_adapter_list, next) {
+ if (strncmp(adapter->name, pci_dev->device.name, PCI_PRI_STR_SIZE) == 0) {
+ found = 1;
+ break;
+ }
+ }
+ rte_spinlock_unlock(&cpfl_adapter_lock);
+
+ if (found == 0)
+ return NULL;
+
+ return adapter;
+}
+
+static void
+cpfl_adapter_ext_deinit(struct cpfl_adapter_ext *adapter)
+{
+ rte_eal_alarm_cancel(cpfl_dev_alarm_handler, adapter);
+ idpf_adapter_deinit(&adapter->base);
+
+ rte_free(adapter->vports);
+ adapter->vports = NULL;
+}
+
+static int
+cpfl_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
+{
+ struct cpfl_vport_param vport_param;
+ struct cpfl_adapter_ext *adapter;
+ struct cpfl_devargs devargs;
+ char name[RTE_ETH_NAME_MAX_LEN];
+ int i, retval;
+ bool first_probe = false;
+
+ if (!cpfl_adapter_list_init) {
+ rte_spinlock_init(&cpfl_adapter_lock);
+ TAILQ_INIT(&cpfl_adapter_list);
+ cpfl_adapter_list_init = true;
+ }
+
+ adapter = cpfl_find_adapter_ext(pci_dev);
+ if (adapter == NULL) {
+ first_probe = true;
+ adapter = rte_zmalloc("cpfl_adapter_ext",
+ sizeof(struct cpfl_adapter_ext), 0);
+ if (adapter == NULL) {
+ PMD_INIT_LOG(ERR, "Failed to allocate adapter.");
+ return -ENOMEM;
+ }
+
+ retval = cpfl_adapter_ext_init(pci_dev, adapter);
+ if (retval != 0) {
+ PMD_INIT_LOG(ERR, "Failed to init adapter.");
+ return retval;
+ }
+
+ rte_spinlock_lock(&cpfl_adapter_lock);
+ TAILQ_INSERT_TAIL(&cpfl_adapter_list, adapter, next);
+ rte_spinlock_unlock(&cpfl_adapter_lock);
+ }
+
+ retval = cpfl_parse_devargs(pci_dev, adapter, &devargs);
+ if (retval != 0) {
+ PMD_INIT_LOG(ERR, "Failed to parse private devargs");
+ goto err;
+ }
+
+ if (devargs.req_vport_nb == 0) {
+ /* If no vport devarg, create vport 0 by default. */
+ vport_param.adapter = adapter;
+ vport_param.devarg_id = 0;
+ vport_param.idx = cpfl_vport_idx_alloc(adapter);
+ if (vport_param.idx == CPFL_INVALID_VPORT_IDX) {
+ PMD_INIT_LOG(ERR, "No space for vport %u", vport_param.devarg_id);
+ return 0;
+ }
+ snprintf(name, sizeof(name), "cpfl_%s_vport_0",
+ pci_dev->device.name);
+ retval = rte_eth_dev_create(&pci_dev->device, name,
+ sizeof(struct idpf_vport),
+ NULL, NULL, cpfl_dev_vport_init,
+ &vport_param);
+ if (retval != 0)
+ PMD_DRV_LOG(ERR, "Failed to create default vport 0");
+ } else {
+ for (i = 0; i < devargs.req_vport_nb; i++) {
+ vport_param.adapter = adapter;
+ vport_param.devarg_id = devargs.req_vports[i];
+ vport_param.idx = cpfl_vport_idx_alloc(adapter);
+ if (vport_param.idx == CPFL_INVALID_VPORT_IDX) {
+ PMD_INIT_LOG(ERR, "No space for vport %u", vport_param.devarg_id);
+ break;
+ }
+ snprintf(name, sizeof(name), "cpfl_%s_vport_%d",
+ pci_dev->device.name,
+ devargs.req_vports[i]);
+ retval = rte_eth_dev_create(&pci_dev->device, name,
+ sizeof(struct idpf_vport),
+ NULL, NULL, cpfl_dev_vport_init,
+ &vport_param);
+ if (retval != 0)
+ PMD_DRV_LOG(ERR, "Failed to create vport %d",
+ vport_param.devarg_id);
+ }
+ }
+
+ return 0;
+
+err:
+ if (first_probe) {
+ rte_spinlock_lock(&cpfl_adapter_lock);
+ TAILQ_REMOVE(&cpfl_adapter_list, adapter, next);
+ rte_spinlock_unlock(&cpfl_adapter_lock);
+ cpfl_adapter_ext_deinit(adapter);
+ rte_free(adapter);
+ }
+ return retval;
+}
+
+static int
+cpfl_pci_remove(struct rte_pci_device *pci_dev)
+{
+ struct cpfl_adapter_ext *adapter = cpfl_find_adapter_ext(pci_dev);
+ uint16_t port_id;
+
+ /* Ethdev created can be found RTE_ETH_FOREACH_DEV_OF through rte_device */
+ RTE_ETH_FOREACH_DEV_OF(port_id, &pci_dev->device) {
+ rte_eth_dev_close(port_id);
+ }
+
+ rte_spinlock_lock(&cpfl_adapter_lock);
+ TAILQ_REMOVE(&cpfl_adapter_list, adapter, next);
+ rte_spinlock_unlock(&cpfl_adapter_lock);
+ cpfl_adapter_ext_deinit(adapter);
+ rte_free(adapter);
+
+ return 0;
+}
+
+static struct rte_pci_driver rte_cpfl_pmd = {
+ .id_table = pci_id_cpfl_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING,
+ .probe = cpfl_pci_probe,
+ .remove = cpfl_pci_remove,
+};
+
+/**
+ * Driver initialization routine.
+ * Invoked once at EAL init time.
+ * Register itself as the [Poll Mode] Driver of PCI devices.
+ */
+RTE_PMD_REGISTER_PCI(net_cpfl, rte_cpfl_pmd);
+RTE_PMD_REGISTER_PCI_TABLE(net_cpfl, pci_id_cpfl_map);
+RTE_PMD_REGISTER_KMOD_DEP(net_cpfl, "* igb_uio | vfio-pci");
+RTE_PMD_REGISTER_PARAM_STRING(net_cpfl,
+ CPFL_TX_SINGLE_Q "=<0|1> "
+ CPFL_RX_SINGLE_Q "=<0|1> "
+ CPFL_VPORT "=[vport_set0,[vport_set1],...]");
+
+RTE_LOG_REGISTER_SUFFIX(cpfl_logtype_init, init, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(cpfl_logtype_driver, driver, NOTICE);
new file mode 100644
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ */
+
+#ifndef _CPFL_ETHDEV_H_
+#define _CPFL_ETHDEV_H_
+
+#include <stdint.h>
+#include <rte_malloc.h>
+#include <rte_spinlock.h>
+#include <rte_ethdev.h>
+#include <rte_kvargs.h>
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
+
+#include "cpfl_logs.h"
+
+#include <idpf_common_device.h>
+#include <idpf_common_virtchnl.h>
+#include <base/idpf_prototype.h>
+#include <base/virtchnl2.h>
+
+#define CPFL_MAX_VPORT_NUM 8
+
+#define CPFL_INVALID_VPORT_IDX 0xffff
+
+#define CPFL_MIN_BUF_SIZE 1024
+#define CPFL_MAX_FRAME_SIZE 9728
+
+#define CPFL_NUM_MACADDR_MAX 64
+
+#define CPFL_VLAN_TAG_SIZE 4
+#define CPFL_ETH_OVERHEAD \
+ (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + CPFL_VLAN_TAG_SIZE * 2)
+
+#define CPFL_ADAPTER_NAME_LEN (PCI_PRI_STR_SIZE + 1)
+
+#define CPFL_ALARM_INTERVAL 50000 /* us */
+
+/* Device IDs */
+#define IDPF_DEV_ID_CPF 0x1453
+
+struct cpfl_vport_param {
+ struct cpfl_adapter_ext *adapter;
+ uint16_t devarg_id; /* arg id from user */
+ uint16_t idx; /* index in adapter->vports[]*/
+};
+
+/* Struct used when parse driver specific devargs */
+struct cpfl_devargs {
+ uint16_t req_vports[CPFL_MAX_VPORT_NUM];
+ uint16_t req_vport_nb;
+};
+
+struct cpfl_adapter_ext {
+ TAILQ_ENTRY(cpfl_adapter_ext) next;
+ struct idpf_adapter base;
+
+ char name[CPFL_ADAPTER_NAME_LEN];
+
+ struct idpf_vport **vports;
+ uint16_t max_vport_nb;
+
+ uint16_t cur_vports; /* bit mask of created vport */
+ uint16_t cur_vport_nb;
+
+ uint16_t used_vecs_num;
+};
+
+TAILQ_HEAD(cpfl_adapter_list, cpfl_adapter_ext);
+
+#define CPFL_DEV_TO_PCI(eth_dev) \
+ RTE_DEV_TO_PCI((eth_dev)->device)
+#define CPFL_ADAPTER_TO_EXT(p) \
+ container_of((p), struct cpfl_adapter_ext, base)
+
+#endif /* _CPFL_ETHDEV_H_ */
new file mode 100644
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2022 Intel Corporation
+ */
+
+#ifndef _CPFL_LOGS_H_
+#define _CPFL_LOGS_H_
+
+#include <rte_log.h>
+
+extern int cpfl_logtype_init;
+extern int cpfl_logtype_driver;
+
+#define PMD_INIT_LOG(level, ...) \
+ rte_log(RTE_LOG_ ## level, \
+ cpfl_logtype_init, \
+ RTE_FMT("%s(): " \
+ RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
+ __func__, \
+ RTE_FMT_TAIL(__VA_ARGS__,)))
+
+#define PMD_DRV_LOG_RAW(level, ...) \
+ rte_log(RTE_LOG_ ## level, \
+ cpfl_logtype_driver, \
+ RTE_FMT("%s(): " \
+ RTE_FMT_HEAD(__VA_ARGS__,) "\n", \
+ __func__, \
+ RTE_FMT_TAIL(__VA_ARGS__,)))
+
+#define PMD_DRV_LOG(level, fmt, args...) \
+ PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
+
+#endif /* _CPFL_LOGS_H_ */
new file mode 100644
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2022 Intel Corporation
+
+if is_windows
+ build = false
+ reason = 'not supported on Windows'
+ subdir_done()
+endif
+
+deps += ['common_idpf']
+
+sources = files(
+ 'cpfl_ethdev.c',
+)
\ No newline at end of file
@@ -13,6 +13,7 @@ drivers = [
'bnxt',
'bonding',
'cnxk',
+ 'cpfl',
'cxgbe',
'dpaa',
'dpaa2',