test_plans: add port information change
Commit Message
add port information change to flow_classify_softnic related config
files.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Comments
> Subject: [dts] [PATCH]test_plans: add port information change
>
> add port information change to flow_classify_softnic related config files.
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Applied
@@ -40,7 +40,9 @@ The SoftNIC allows building custom NIC pipelines in SW. The Soft NIC pipeline is
Prerequisites
=============
-The DUT must have four 10G Ethernet ports connected to four ports on tester that are controlled by the Scapy packet generator::
+The DUT can have 4*10G Ethernet ports or 2*10G Ethernet ports.
+We design case with 4*10G Ethernet ports.
+The DUT have four 10G Ethernet ports connected to four ports on tester that are controlled by the Scapy packet generator::
dut_port_0 <---> tester_port_0
dut_port_1 <---> tester_port_1
@@ -59,6 +61,14 @@ Bind them to dpdk igb_uio driver::
./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1 05:00.2 05:00.3
Change ./drivers/net/softnic/firmware.cli to meet the specific test environment.
+Change ports info to your actual ports info::
+
+ link LINK0 dev 0000:05:00.0
+ link LINK1 dev 0000:05:00.1
+ link LINK2 dev 0000:05:00.2
+ link LINK3 dev 0000:05:00.3
+
+Other changes are shown in each case.
Start softnic with following command line::