[V1] test_plans/vhost_enqueue_interrupt_test_plan: remove old testplan
Commit Message
*. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by test_plans/vhost_user_interrupt_test_plan.rst
Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
---
.../vhost_enqueue_interrupt_test_plan.rst | 145 ------------------
1 file changed, 145 deletions(-)
delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
Comments
Tested-by: Xiao Qimai <qimaix.xiao@intel.com>
Regards,
Xiao Qimai
> -----Original Message-----
> From: Xiao, QimaiX <qimaix.xiao@intel.com>
> Sent: Thursday, August 27, 2020 5:41 PM
> To: dts@dpdk.org
> Cc: Xiao, QimaiX <qimaix.xiao@intel.com>
> Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> remove old testplan
>
> *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> test_plans/vhost_user_interrupt_test_plan.rst
>
> Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
> ---
> .../vhost_enqueue_interrupt_test_plan.rst | 145 ------------------
> 1 file changed, 145 deletions(-)
> delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
>
> diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> b/test_plans/vhost_enqueue_interrupt_test_plan.rst
> deleted file mode 100644
> index ee9b7a5d..00000000
> --- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> +++ /dev/null
> @@ -1,145 +0,0 @@
> -.. Copyright (c) <2019>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> GOODS OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -======================================
> -vhost enqueue interrupt mode test plan
> -======================================
> -
> -Description
> -===========
> -
> -Vhost enqueue interrupt need test with l3fwd-power sample, small packets
> send from virtio-user to vhost side，
> -check vhost-user cores can be wakeup，and vhost-user cores should be
> back to sleep after stop sending packets -from virtio side.
> -
> -Prerequisites
> -=============
> -
> -Modify l3fwd-power example code and recompile::
> -
> - --- a/examples/l3fwd-power/main.c
> - +++ b/examples/l3fwd-power/main.c
> - @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
> - .mq_mode = ETH_MQ_RX_RSS,
> - .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> - .split_hdr_size = 0,
> - - .offloads = DEV_RX_OFFLOAD_CHECKSUM,
> - },
> - .rx_adv_conf = {
> - .rss_conf = {
> -
> -Test flow
> -=========
> -
> -Virtio-user --> Vhost-user
> -
> -Test Case1: Wake up split ring vhost-user core with l3fwd-power sample -
> ==========================================================
> ============
> -
> -1. Launch virtio-user with server mode::
> -
> - ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1 -- -i
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> - ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> ptype 1 --config "(0,0,2)"
> -
> -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> -
> - testpmd>set fwd txonly
> - testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user core will sleep and
> wakeup again.
> -
> -Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample
> when multi queues are enabled -
> ==========================================================
> ===========================================
> -
> -1. Launch virtio-user with server mode::
> -
> - ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=4 -- -i --rxq=4 --txq=4 --rss-ip
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> - ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> --log-level=9 \
> - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> ptype 1 \
> - --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> -
> -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup
> status::
> -
> - testpmd>set fwd txonly
> - testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user cores will sleep and
> wakeup again.
> -
> -Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample -
> ==========================================================
> =============
> -
> -1. Launch virtio-user with server mode::
> -
> - ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=1,packed_vq=1 -- -i
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> - ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> ptype 1 --config "(0,0,2)"
> -
> -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> -
> - testpmd>set fwd txonly
> - testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user core will sleep and
> wakeup again.
> -
> -Test Case4: Wake up packed ring vhost-user cores with l3fwd-power
> sample when multi queues are enabled -
> ==========================================================
> =============================================
> -
> -1. Launch virtio-user with server mode::
> -
> - ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> prefix=virtio \
> - --
> vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,qu
> eues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
> -
> -2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost
> device::
> -
> - ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> --log-level=9 \
> - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> ptype 1 \
> - --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> -
> -3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup
> status::
> -
> - testpmd>set fwd txonly
> - testpmd>start
> -
> -4. Stop and restart testpmd again, check vhost-user cores will sleep and
> wakeup again.
> --
> 2.25.1
test_plans/vhost_enqueue_interrupt_test_plan.rst: does not exist
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Xiao, QimaiX
> Sent: 2020年8月27日 18:13
> To: dts@dpdk.org
> Subject: Re: [dts] [PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> remove old testplan
>
> Tested-by: Xiao Qimai <qimaix.xiao@intel.com>
>
> Regards,
> Xiao Qimai
>
> > -----Original Message-----
> > From: Xiao, QimaiX <qimaix.xiao@intel.com>
> > Sent: Thursday, August 27, 2020 5:41 PM
> > To: dts@dpdk.org
> > Cc: Xiao, QimaiX <qimaix.xiao@intel.com>
> > Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> > remove old testplan
> >
> > *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> > test_plans/vhost_user_interrupt_test_plan.rst
> >
> > Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
> > ---
> > .../vhost_enqueue_interrupt_test_plan.rst | 145 ------------------
> > 1 file changed, 145 deletions(-)
> > delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
> >
> > diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> > b/test_plans/vhost_enqueue_interrupt_test_plan.rst
> > deleted file mode 100644
> > index ee9b7a5d..00000000
> > --- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
> > +++ /dev/null
> > @@ -1,145 +0,0 @@
> > -.. Copyright (c) <2019>, Intel Corporation
> > - All rights reserved.
> > -
> > - Redistribution and use in source and binary forms, with or without
> > - modification, are permitted provided that the following conditions
> > - are met:
> > -
> > - - Redistributions of source code must retain the above copyright
> > - notice, this list of conditions and the following disclaimer.
> > -
> > - - Redistributions in binary form must reproduce the above copyright
> > - notice, this list of conditions and the following disclaimer in
> > - the documentation and/or other materials provided with the
> > - distribution.
> > -
> > - - Neither the name of Intel Corporation nor the names of its
> > - contributors may be used to endorse or promote products derived
> > - from this software without specific prior written permission.
> > -
> > - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> > CONTRIBUTORS
> > - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> > NOT
> > - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > FITNESS
> > - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> > - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
> > INDIRECT,
> > - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> > - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
> > GOODS OR
> > - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> > - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
> > CONTRACT,
> > - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> > - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> > ADVISED
> > - OF THE POSSIBILITY OF SUCH DAMAGE.
> > -
> > -======================================
> > -vhost enqueue interrupt mode test plan
> > -======================================
> > -
> > -Description
> > -===========
> > -
> > -Vhost enqueue interrupt need test with l3fwd-power sample, small
> > packets send from virtio-user to vhost side，
> > -check vhost-user cores can be wakeup，and vhost-user cores should be
> > back to sleep after stop sending packets -from virtio side.
> > -
> > -Prerequisites
> > -=============
> > -
> > -Modify l3fwd-power example code and recompile::
> > -
> > - --- a/examples/l3fwd-power/main.c
> > - +++ b/examples/l3fwd-power/main.c
> > - @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
> > - .mq_mode = ETH_MQ_RX_RSS,
> > - .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
> > - .split_hdr_size = 0,
> > - - .offloads = DEV_RX_OFFLOAD_CHECKSUM,
> > - },
> > - .rx_adv_conf = {
> > - .rss_conf = {
> > -
> > -Test flow
> > -=========
> > -
> > -Virtio-user --> Vhost-user
> > -
> > -Test Case1: Wake up split ring vhost-user core with l3fwd-power
> > sample -
> ==========================================================
> > ============
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > - ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > - --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=1 -- -i
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > - ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> > - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> > ptype 1 --config "(0,0,2)"
> > -
> > -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> > -
> > - testpmd>set fwd txonly
> > - testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user core will sleep
> > and wakeup again.
> > -
> > -Test Case2: Wake up split ring vhost-user cores with l3fwd-power
> > sample when multi queues are enabled -
> > ==========================================================
> > ===========================================
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > - ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > - --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=4 -- -i --rxq=4 --txq=4 --rss-ip
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > - ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> > --log-level=9 \
> > - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> > ptype 1 \
> > - --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> > -
> > -3. Send packet by testpmd, check vhost-user multi-cores will keep
> > wakeup
> > status::
> > -
> > - testpmd>set fwd txonly
> > - testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user cores will sleep
> > and wakeup again.
> > -
> > -Test Case3: Wake up packed ring vhost-user core with l3fwd-power
> > sample -
> ==========================================================
> > =============
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > - ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > - --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=1,packed_vq=1 -- -i
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > - ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
> > - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-
> > ptype 1 --config "(0,0,2)"
> > -
> > -3. Send packet by testpmd, check vhost-user core will keep wakeup status::
> > -
> > - testpmd>set fwd txonly
> > - testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user core will sleep
> > and wakeup again.
> > -
> > -Test Case4: Wake up packed ring vhost-user cores with l3fwd-power
> > sample when multi queues are enabled -
> > ==========================================================
> > =============================================
> > -
> > -1. Launch virtio-user with server mode::
> > -
> > - ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-
> > prefix=virtio \
> > - --
> > vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,q
> > u
> > eues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
> > -
> > -2. Build l3fwd-power sample and launch l3fwd-power with a virtual
> > vhost
> > device::
> > -
> > - ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci
> > --log-level=9 \
> > - --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-
> > ptype 1 \
> > - --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
> > -
> > -3. Send packet by testpmd, check vhost-user multi-cores will keep
> > wakeup
> > status::
> > -
> > - testpmd>set fwd txonly
> > - testpmd>start
> > -
> > -4. Stop and restart testpmd again, check vhost-user cores will sleep
> > and wakeup again.
> > --
> > 2.25.1
> > > Subject: [dts][PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan:
> > > remove old testplan
> > >
> > > *. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by
> > > test_plans/vhost_user_interrupt_test_plan.rst
> > >
> > > Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
>
> test_plans/vhost_enqueue_interrupt_test_plan.rst: does not exist
>
Sorry, this comment is for another patch.
Applied.
deleted file mode 100644
@@ -1,145 +0,0 @@
-.. Copyright (c) <2019>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-======================================
-vhost enqueue interrupt mode test plan
-======================================
-
-Description
-===========
-
-Vhost enqueue interrupt need test with l3fwd-power sample, small packets send from virtio-user to vhost side，
-check vhost-user cores can be wakeup，and vhost-user cores should be back to sleep after stop sending packets
-from virtio side.
-
-Prerequisites
-=============
-
-Modify l3fwd-power example code and recompile::
-
- --- a/examples/l3fwd-power/main.c
- +++ b/examples/l3fwd-power/main.c
- @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
- .mq_mode = ETH_MQ_RX_RSS,
- .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
- .split_hdr_size = 0,
- - .offloads = DEV_RX_OFFLOAD_CHECKSUM,
- },
- .rx_adv_conf = {
- .rss_conf = {
-
-Test flow
-=========
-
-Virtio-user --> Vhost-user
-
-Test Case1: Wake up split ring vhost-user core with l3fwd-power sample
-======================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
-
-3. Send packet by testpmd, check vhost-user core will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
-
-Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues are enabled
-=====================================================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
- --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
-
-3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
-
-Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample
-=======================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
-
-3. Send packet by testpmd, check vhost-user core will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
-
-Test Case4: Wake up packed ring vhost-user cores with l3fwd-power sample when multi queues are enabled
-=======================================================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
- --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
-
-3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.