diff mbox series

[V1,2/2] test_plans/cvl_fdir_test_plan:remove flow-mark-support param

Message ID 20200929061747.27735-2-weix.xie@intel.com (mailing list archive)
State Accepted
Headers
Series [V1,1/2] tests/TestSuite_cvl_fdir:remove flow-mark-support param |

Commit Message

Xie, WeiX Sept. 29, 2020, 6:17 a.m. UTC 
  According to dpdk commit 62451c94a, remove flow-mark-support param when
it launches testpmd.

Signed-off-by: Xie wei <weix.xie@intel.com>
---
 test_plans/cvl_fdir_test_plan.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Peng, Yuan Sept. 29, 2020, 6:54 a.m. UTC | #1 
Acked by Peng, Yuan <yuan.peng@intel.com>


-----Original Message-----
From: dts <dts-bounces@dpdk.org> On Behalf Of Xie wei
Sent: Tuesday, September 29, 2020 2:18 PM
To: dts@dpdk.org
Cc: Xie, WeiX <weix.xie@intel.com>
Subject: [dts] [PATCH V1 2/2] test_plans/cvl_fdir_test_plan:remove flow-mark-support param

According to dpdk commit 62451c94a, remove flow-mark-support param when it launches testpmd.

Signed-off-by: Xie wei <weix.xie@intel.com>
---
 test_plans/cvl_fdir_test_plan.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
index 7c2357e4..0e1521fe 100644
--- a/test_plans/cvl_fdir_test_plan.rst
+++ b/test_plans/cvl_fdir_test_plan.rst
@@ -137,7 +137,7 @@ Prerequisites
 
 5. Launch the app ``testpmd`` with the following arguments::
 
-    ./testpmd -c 0xff -n 6 -w 86:00.0,,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    ./testpmd -c 0xff -n 6 -w 86:00.0 --log-level="ice,7" -- -i 
+ --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
     testpmd> set fwd rxonly
     testpmd> set verbose 1
 
@@ -148,7 +148,7 @@ Prerequisites
 
    Notes: if need two ports environment, launch ``testpmd`` with the following arguments::
 
-    ./testpmd -c 0xff -n 6 -w 86:00.0,flow-mark-support=1 -w 86:00.1,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    ./testpmd -c 0xff -n 6 -w 86:00.0 -w 86:00.1 --log-level="ice,7" -- 
+ -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
 
 
 Default parameters
--
2.17.1
diff mbox series

Patch

diff --git a/test_plans/cvl_fdir_test_plan.rst b/test_plans/cvl_fdir_test_plan.rst
index 7c2357e4..0e1521fe 100644
--- a/test_plans/cvl_fdir_test_plan.rst
+++ b/test_plans/cvl_fdir_test_plan.rst
@@ -137,7 +137,7 @@  Prerequisites
 
 5. Launch the app ``testpmd`` with the following arguments::
 
-    ./testpmd -c 0xff -n 6 -w 86:00.0,,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    ./testpmd -c 0xff -n 6 -w 86:00.0 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
     testpmd> set fwd rxonly
     testpmd> set verbose 1
 
@@ -148,7 +148,7 @@  Prerequisites
 
    Notes: if need two ports environment, launch ``testpmd`` with the following arguments::
 
-    ./testpmd -c 0xff -n 6 -w 86:00.0,flow-mark-support=1 -w 86:00.1,flow-mark-support=1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
+    ./testpmd -c 0xff -n 6 -w 86:00.0 -w 86:00.1 --log-level="ice,7" -- -i --portmask=0xff --rxq=64 --txq=64 --port-topology=loop
 
 
 Default parameters