net/mlx5: fix MPRQ stride size check
Checks
Commit Message
We should only check that MPRQ stride size is bigger than the mbuf size
in case no devarg configuration has been provided. Headroom check was
indtroduced recently and removed this condition inadvertently.
Restore this condition and only check if mprq_log_stride_size is not set.
Fixes: 8e7925aa77 ("net/mlx5: fix MPRQ stride size to accommodate the headroom")
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
---
drivers/net/mlx5/mlx5.c | 2 +-
drivers/net/mlx5/mlx5_rxq.c | 25 ++++++++++++++-----------
2 files changed, 15 insertions(+), 12 deletions(-)
Comments
> -----Original Message-----
> From: Alexander Kozyrev <akozyrev@nvidia.com>
> Sent: Thursday, October 12, 2023 7:35 PM
> To: dev@dpdk.org
> Cc: stable@dpdk.org; Suanming Mou <suanmingm@nvidia.com>; Slava
> Ovsiienko <viacheslavo@nvidia.com>
> Subject: [PATCH] net/mlx5: fix MPRQ stride size check
>
> We should only check that MPRQ stride size is bigger than the mbuf size in
> case no devarg configuration has been provided. Headroom check was
> indtroduced recently and removed this condition inadvertently.
> Restore this condition and only check if mprq_log_stride_size is not set.
>
> Fixes: 8e7925aa77 ("net/mlx5: fix MPRQ stride size to accommodate the
> headroom")
>
> Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Hi,
> -----Original Message-----
> From: Alexander Kozyrev <akozyrev@nvidia.com>
> Sent: Thursday, October 12, 2023 7:35 PM
> To: dev@dpdk.org
> Cc: stable@dpdk.org; Suanming Mou <suanmingm@nvidia.com>; Slava
> Ovsiienko <viacheslavo@nvidia.com>
> Subject: [PATCH] net/mlx5: fix MPRQ stride size check
>
> We should only check that MPRQ stride size is bigger than the mbuf size in
> case no devarg configuration has been provided. Headroom check was
> indtroduced recently and removed this condition inadvertently.
> Restore this condition and only check if mprq_log_stride_size is not set.
>
> Fixes: 8e7925aa77 ("net/mlx5: fix MPRQ stride size to accommodate the
> headroom")
fixed the wrong fixes line
>
> Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Patch applied to next-net-mlx,
Kindest regards
Raslan Darawsheh
@@ -2616,7 +2616,7 @@ mlx5_port_args_config(struct mlx5_priv *priv, struct mlx5_kvargs_ctrl *mkvlist,
config->mprq.max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN;
config->mprq.min_rxqs_num = MLX5_MPRQ_MIN_RXQS;
config->mprq.log_stride_num = MLX5_MPRQ_DEFAULT_LOG_STRIDE_NUM;
- config->mprq.log_stride_size = MLX5_MPRQ_DEFAULT_LOG_STRIDE_SIZE;
+ config->mprq.log_stride_size = MLX5_ARG_UNSET;
config->log_hp_size = MLX5_ARG_UNSET;
config->std_delay_drop = 0;
config->hp_delay_drop = 0;
@@ -1605,18 +1605,19 @@ mlx5_mprq_prepare(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
*actual_log_stride_num = config->mprq.log_stride_num;
}
/* Checks if chosen size of stride is in supported range. */
- if (config->mprq.log_stride_size > log_max_stride_size ||
- config->mprq.log_stride_size < log_min_stride_size) {
- *actual_log_stride_size = log_def_stride_size;
- DRV_LOG(WARNING,
- "Port %u Rx queue %u size of a stride for Multi-Packet RQ is out of range, setting default value (%u)",
- dev->data->port_id, idx,
- RTE_BIT32(log_def_stride_size));
+ if (config->mprq.log_stride_size != (uint32_t)MLX5_ARG_UNSET) {
+ if (config->mprq.log_stride_size > log_max_stride_size ||
+ config->mprq.log_stride_size < log_min_stride_size) {
+ *actual_log_stride_size = log_def_stride_size;
+ DRV_LOG(WARNING,
+ "Port %u Rx queue %u size of a stride for Multi-Packet RQ is out of range, setting default value (%u)",
+ dev->data->port_id, idx,
+ RTE_BIT32(log_def_stride_size));
+ } else {
+ *actual_log_stride_size = config->mprq.log_stride_size;
+ }
} else {
- *actual_log_stride_size = config->mprq.log_stride_size;
- }
- /* Make the stride fit the mbuf size by default. */
- if (*actual_log_stride_size == MLX5_MPRQ_DEFAULT_LOG_STRIDE_SIZE) {
+ /* Make the stride fit the mbuf size by default. */
if (min_mbuf_size <= RTE_BIT32(log_max_stride_size)) {
DRV_LOG(WARNING,
"Port %u Rx queue %u size of a stride for Multi-Packet RQ is adjusted to match the mbuf size (%u)",
@@ -1675,6 +1676,8 @@ mlx5_mprq_prepare(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
" min_stride_sz = %u, max_stride_sz = %u).\n"
"Rx segment is %senabled. External mempool is %sused.",
dev->data->port_id, min_mbuf_size, desc, priv->rxqs_n,
+ config->mprq.log_stride_size == (uint32_t)MLX5_ARG_UNSET ?
+ RTE_BIT32(MLX5_MPRQ_DEFAULT_LOG_STRIDE_SIZE) :
RTE_BIT32(config->mprq.log_stride_size),
RTE_BIT32(config->mprq.log_stride_num),
config->mprq.min_rxqs_num,