[dpdk-dev,v2] app/test: improve error message in crypto test code
Commit Message
Improve error message if crypto PMD build is not enabled in config file
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
---
app/test/test_cryptodev.c | 33 +++++++++++++++++++++++++++++++++
app/test/test_cryptodev_perf.c | 18 ++++++++++++++++++
2 files changed, 51 insertions(+)
Comments
> -----Original Message-----
> From: Trahe, Fiona
> Sent: Monday, September 26, 2016 5:57 AM
> To: dev@dpdk.org
> Cc: De Lara Guarch, Pablo; Trahe, Fiona
> Subject: [PATCH v2] app/test: improve error message in crypto test code
>
> Improve error message if crypto PMD build is not enabled in config file
>
> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
> ---
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
@@ -182,6 +182,11 @@ testsuite_setup(void)
/* Create 2 AESNI MB devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_AESNI_MB_PMD);
if (nb_devs < 2) {
@@ -199,6 +204,11 @@ testsuite_setup(void)
/* Create 2 AESNI GCM devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_AESNI_GCM_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_GCM
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_GCM must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_AESNI_GCM_PMD);
if (nb_devs < 2) {
@@ -214,6 +224,11 @@ testsuite_setup(void)
/* Create 2 SNOW 3G devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -228,6 +243,11 @@ testsuite_setup(void)
/* Create 2 KASUMI devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_KASUMI_PMD) {
+#ifndef RTE_LIBRTE_PMD_KASUMI
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_KASUMI must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_KASUMI_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -242,6 +262,11 @@ testsuite_setup(void)
/* Create 2 NULL devices if required */
if (gbl_cryptodev_type == RTE_CRYPTODEV_NULL_PMD) {
+#ifndef RTE_LIBRTE_PMD_NULL_CRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(
RTE_CRYPTODEV_NULL_PMD);
if (nb_devs < 2) {
@@ -257,6 +282,14 @@ testsuite_setup(void)
}
}
+#ifndef RTE_LIBRTE_PMD_QAT
+ if (gbl_cryptodev_type == RTE_CRYPTODEV_QAT_SYM_PMD) {
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+#endif
+
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
RTE_LOG(ERR, USER1, "No crypto devices found?");
@@ -245,6 +245,11 @@ testsuite_setup(void)
/* Create 2 AESNI MB devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_AESNI_MB_PMD) {
+#ifndef RTE_LIBRTE_PMD_AESNI_MB
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_AESNI_MB must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_AESNI_MB_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -260,6 +265,11 @@ testsuite_setup(void)
/* Create 2 SNOW3G devices if required */
if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_SNOW3G_PMD) {
+#ifndef RTE_LIBRTE_PMD_SNOW3G
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_SNOW3G must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
nb_devs = rte_cryptodev_count_devtype(RTE_CRYPTODEV_SNOW3G_PMD);
if (nb_devs < 2) {
for (i = nb_devs; i < 2; i++) {
@@ -273,6 +283,14 @@ testsuite_setup(void)
}
}
+#ifndef RTE_LIBRTE_PMD_QAT
+ if (gbl_cryptodev_perftest_devtype == RTE_CRYPTODEV_QAT_SYM_PMD) {
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_QAT must be enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+#endif
+
nb_devs = rte_cryptodev_count();
if (nb_devs < 1) {
RTE_LOG(ERR, USER1, "No crypto devices found?");