diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c
index 277cc25..3e442f7 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c
@@ -111,9 +111,27 @@ s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 	struct ixgbe_mac_info *mac = &hw->mac;
 	struct ixgbe_phy_info *phy = &hw->phy;
 	s32 ret_val = IXGBE_SUCCESS;
+	u32 esdp;
 
 	DEBUGFUNC("ixgbe_init_phy_ops_82599");
 
+	if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
+		/* Store flag indicating I2C bus access control unit. */
+		hw->phy.qsfp_shared_i2c_bus = TRUE;
+
+		/* Initialize access to QSFP+ I2C bus */
+		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+		esdp |= IXGBE_ESDP_SDP0_DIR;
+		esdp &= ~IXGBE_ESDP_SDP1_DIR;
+		esdp &= ~IXGBE_ESDP_SDP0;
+		esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
+		esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+		IXGBE_WRITE_FLUSH(hw);
+
+		phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
+		phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
+	}
 	/* Identify the PHY or SFP module */
 	ret_val = phy->ops.identify(hw);
 	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
@@ -397,10 +415,8 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	/* Check if 1G SFP module. */
 	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
-#ifdef SUPPORT_1000BASE_LX
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
-#endif
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
 	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
@@ -477,7 +493,13 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
 			  IXGBE_LINK_SPEED_1GB_FULL;
 
-		*autoneg = true;
+		/* QSFP must not enable full auto-negotiation
+		 * Limited autoneg is enabled at 1G
+		 */
+		if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
+			*autoneg = false;
+		else
+			*autoneg = true;
 	}
 
 out:
@@ -530,6 +552,12 @@ enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82599_T3_LOM:
 		media_type = ixgbe_media_type_copper;
 		break;
+	case IXGBE_DEV_ID_82599_LS:
+		media_type = ixgbe_media_type_fiber_lco;
+		break;
+	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
+		media_type = ixgbe_media_type_fiber_qsfp;
+		break;
 	default:
 		media_type = ixgbe_media_type_unknown;
 		break;
@@ -755,6 +783,9 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 			IXGBE_WRITE_FLUSH(hw);
 			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects MAC link speed */
+			break;
 		default:
 			DEBUGOUT("Unexpected media type.\n");
 			break;
@@ -813,6 +844,9 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 			IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 			IXGBE_WRITE_FLUSH(hw);
 			break;
+		case ixgbe_media_type_fiber_qsfp:
+			/* QSFP module automatically detects link speed */
+			break;
 		default:
 			DEBUGOUT("Unexpected media type.\n");
 			break;
@@ -1052,7 +1086,7 @@ s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 		if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
 		    (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
 			autoc &= ~IXGBE_AUTOC_LMS_MASK;
-			if (autoneg)
+			if (autoneg || hw->phy.type == ixgbe_phy_qsfp_intel)
 				autoc |= IXGBE_AUTOC_LMS_1G_AN;
 			else
 				autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
@@ -2204,8 +2238,6 @@ u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
 	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 	u16 ext_ability = 0;
-	u8 comp_codes_10g = 0;
-	u8 comp_codes_1g = 0;
 
 	DEBUGFUNC("ixgbe_get_support_physical_layer_82599");
 
@@ -2273,40 +2305,7 @@ sfp_check:
 	/* SFP check must be done last since DA modules are sometimes used to
 	 * test KR mode -  we need to id KR mode correctly before SFP module.
 	 * Call identify_sfp because the pluggable module may have changed */
-	hw->phy.ops.identify_sfp(hw);
-	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
-		goto out;
-
-	switch (hw->phy.type) {
-	case ixgbe_phy_sfp_passive_tyco:
-	case ixgbe_phy_sfp_passive_unknown:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-		break;
-	case ixgbe_phy_sfp_ftl_active:
-	case ixgbe_phy_sfp_active_unknown:
-		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
-		break;
-	case ixgbe_phy_sfp_avago:
-	case ixgbe_phy_sfp_ftl:
-	case ixgbe_phy_sfp_intel:
-	case ixgbe_phy_sfp_unknown:
-		hw->phy.ops.read_i2c_eeprom(hw,
-		      IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
-		hw->phy.ops.read_i2c_eeprom(hw,
-		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
-		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-		else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
-		else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
-			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
-		break;
-	default:
-		break;
-	}
-
+	physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw);
 out:
 	return physical_layer;
 }
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c
index 378304f..8ed4b75 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c
@@ -138,8 +138,10 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82599_SFP_EM:
 	case IXGBE_DEV_ID_82599_SFP_SF2:
 	case IXGBE_DEV_ID_82599_SFP_SF_QP:
+	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
 	case IXGBE_DEV_ID_82599EN_SFP:
 	case IXGBE_DEV_ID_82599_CX4:
+	case IXGBE_DEV_ID_82599_LS:
 	case IXGBE_DEV_ID_82599_T3_LOM:
 		hw->mac.type = ixgbe_mac_82599EB;
 		break;
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c
index 850c12d..833aae9 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c
@@ -165,6 +165,7 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 	DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
 
 	switch (hw->phy.media_type) {
+	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		hw->mac.ops.check_link(hw, &speed, &link_up, false);
 		/* if link is down, assume supported */
@@ -213,10 +214,7 @@ STATIC s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 
 	DEBUGFUNC("ixgbe_setup_fc");
 
-	/*
-	 * Validate the requested mode.  Strict IEEE mode does not allow
-	 * ixgbe_fc_rx_pause because it will cause us to fail at UNH.
-	 */
+	/* Validate the requested mode */
 	if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
 		ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
 			   "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
@@ -244,6 +242,7 @@ STATIC s32 ixgbe_setup_fc(struct ixgbe_hw *hw)
 			goto out;
 
 		/* only backplane uses autoc so fall though */
+	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
 
@@ -3023,6 +3022,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 
 	switch (hw->phy.media_type) {
 	/* Autoneg flow control on fiber adapters */
+	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
 			ret_val = ixgbe_fc_autoneg_fiber(hw);
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
index 4351f4f..462e884 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
@@ -46,11 +46,193 @@ STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
 STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
 STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
 STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
-STATIC bool ixgbe_get_i2c_data(u32 *i2cctl);
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
 STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
 					  u8 *sff8472_data);
 
 /**
+ * ixgbe_out_i2c_byte_ack - Send I2C byte with ack
+ * @hw: pointer to the hardware structure
+ * @byte: byte to send
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
+{
+	s32 status;
+
+	status = ixgbe_clock_out_i2c_byte(hw, byte);
+	if (status)
+		return status;
+	return ixgbe_get_i2c_ack(hw);
+}
+
+/**
+ * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
+ * @hw: pointer to the hardware structure
+ * @byte: pointer to a u8 to receive the byte
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
+{
+	s32 status;
+
+	status = ixgbe_clock_in_i2c_byte(hw, byte);
+	if (status)
+		return status;
+	/* ACK */
+	return ixgbe_clock_out_i2c_bit(hw, false);
+}
+
+/**
+ * ixgbe_ones_comp_byte_add - Perform one's complement addition
+ * @add1 - addend 1
+ * @add2 - addend 2
+ *
+ * Returns one's complement 8-bit sum.
+ */
+STATIC u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
+{
+	u16 sum = add1 + add2;
+
+	sum = (sum & 0xFF) + (sum >> 8);
+	return sum & 0xFF;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+					   u16 reg, u16 *val)
+{
+	u32 swfw_mask = hw->phy.phy_semaphore_mask;
+	int max_retry = 10;
+	int retry = 0;
+	u8 csum_byte;
+	u8 high_bits;
+	u8 low_bits;
+	u8 reg_high;
+	u8 csum;
+
+	reg_high = ((reg >> 7) & 0xFE) | 1;	/* Indicate read combined */
+	csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+	csum = ~csum;
+	do {
+		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+			return IXGBE_ERR_SWFW_SYNC;
+		ixgbe_i2c_start(hw);
+		/* Device Address and write indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr))
+			goto fail;
+		/* Write bits 14:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+			goto fail;
+		/* Write bits 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+			goto fail;
+		/* Write csum */
+		if (ixgbe_out_i2c_byte_ack(hw, csum))
+			goto fail;
+		/* Re-start condition */
+		ixgbe_i2c_start(hw);
+		/* Device Address and read indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
+			goto fail;
+		/* Get upper bits */
+		if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
+			goto fail;
+		/* Get low bits */
+		if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
+			goto fail;
+		/* Get csum */
+		if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
+			goto fail;
+		/* NACK */
+		if (ixgbe_clock_out_i2c_bit(hw, false))
+			goto fail;
+		ixgbe_i2c_stop(hw);
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		*val = (high_bits << 8) | low_bits;
+		return 0;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte read combined error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte read combined error.\n");
+	} while (retry < max_retry);
+
+	return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+					    u8 addr, u16 reg, u16 val)
+{
+	int max_retry = 1;
+	int retry = 0;
+	u8 reg_high;
+	u8 csum;
+
+	reg_high = (reg >> 7) & 0xFE;	/* Indicate write combined */
+	csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+	csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
+	csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
+	csum = ~csum;
+	do {
+		ixgbe_i2c_start(hw);
+		/* Device Address and write indication */
+		if (ixgbe_out_i2c_byte_ack(hw, addr))
+			goto fail;
+		/* Write bits 14:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+			goto fail;
+		/* Write bits 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+			goto fail;
+		/* Write data 15:8 */
+		if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
+			goto fail;
+		/* Write data 7:0 */
+		if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
+			goto fail;
+		/* Write csum */
+		if (ixgbe_out_i2c_byte_ack(hw, csum))
+			goto fail;
+		ixgbe_i2c_stop(hw);
+		return 0;
+
+fail:
+		ixgbe_i2c_bus_clear(hw);
+		retry++;
+		if (retry < max_retry)
+			DEBUGOUT("I2C byte write combined error - Retrying.\n");
+		else
+			DEBUGOUT("I2C byte write combined error.\n");
+	} while (retry < max_retry);
+
+	return IXGBE_ERR_I2C;
+}
+
+/**
  *  ixgbe_init_phy_ops_generic - Inits PHY function ptrs
  *  @hw: pointer to the hardware structure
  *
@@ -81,6 +263,8 @@ s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
 	phy->ops.i2c_bus_clear = &ixgbe_i2c_bus_clear;
 	phy->ops.identify_sfp = &ixgbe_identify_module_generic;
 	phy->sfp_type = ixgbe_sfp_type_unknown;
+	phy->ops.read_i2c_combined = &ixgbe_read_i2c_combined_generic;
+	phy->ops.write_i2c_combined = &ixgbe_write_i2c_combined_generic;
 	phy->ops.check_overtemp = &ixgbe_tn_check_overtemp;
 	return IXGBE_SUCCESS;
 }
@@ -1019,6 +1203,9 @@ s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
 		status = ixgbe_identify_sfp_module_generic(hw);
 		break;
 
+	case ixgbe_media_type_fiber_qsfp:
+		status = ixgbe_identify_qsfp_module_generic(hw);
+		break;
 
 	default:
 		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
@@ -1115,7 +1302,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				hw->phy.sfp_type = ixgbe_sfp_type_lr;
 			else
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
-		} else if (hw->mac.type == ixgbe_mac_82599EB) {
+		} else {
 			if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
@@ -1148,16 +1335,6 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				else
 					hw->phy.sfp_type =
 						      ixgbe_sfp_type_srlr_core1;
-#ifdef SUPPORT_10GBASE_ER
-			} else if (comp_codes_10g &
-				   IXGBE_SFF_10GBASEER_CAPABLE) {
-				if (hw->bus.lan_id == 0)
-					hw->phy.sfp_type =
-							ixgbe_sfp_type_er_core0;
-				else
-					hw->phy.sfp_type =
-							ixgbe_sfp_type_er_core1;
-#endif /* SUPPORT_10GBASE_ER */
 			} else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
@@ -1172,7 +1349,6 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				else
 					hw->phy.sfp_type =
 						ixgbe_sfp_type_1g_sx_core1;
-#ifdef SUPPORT_1000BASE_LX
 			} else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
 				if (hw->bus.lan_id == 0)
 					hw->phy.sfp_type =
@@ -1180,7 +1356,6 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 				else
 					hw->phy.sfp_type =
 						ixgbe_sfp_type_1g_lx_core1;
-#endif /* SUPPORT_1000BASE_LX */
 			} else {
 				hw->phy.sfp_type = ixgbe_sfp_type_unknown;
 			}
@@ -1268,10 +1443,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		if (comp_codes_10g == 0 &&
 		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
-#ifdef SUPPORT_1000BASE_LX
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
-#endif
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
 			hw->phy.type = ixgbe_phy_sfp_unsupported;
@@ -1289,14 +1462,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
 		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
 		    !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
-#ifdef SUPPORT_1000BASE_LX
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
-#endif
-#ifdef SUPPORT_10GBASE_ER
-		      hw->phy.sfp_type == ixgbe_sfp_type_er_core0 ||
-		      hw->phy.sfp_type == ixgbe_sfp_type_er_core1 ||
-#endif
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
 		      hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
 			/* Make sure we're a supported PHY type */
@@ -1339,6 +1506,266 @@ err_read_i2c_eeprom:
 	return IXGBE_ERR_SFP_NOT_PRESENT;
 }
 
+/**
+ *  ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current SFP.
+ */
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u8 comp_codes_10g = 0;
+	u8 comp_codes_1g = 0;
+
+	DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic");
+
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		return physical_layer;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_sfp_passive_tyco:
+	case ixgbe_phy_sfp_passive_unknown:
+	case ixgbe_phy_qsfp_passive_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_ftl_active:
+	case ixgbe_phy_sfp_active_unknown:
+	case ixgbe_phy_qsfp_active_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
+		break;
+	case ixgbe_phy_qsfp_intel:
+	case ixgbe_phy_qsfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		break;
+	default:
+		break;
+	}
+
+	return physical_layer;
+}
+
+/**
+ *  ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ *  @hw: pointer to hardware structure
+ *
+ *  Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 vendor_oui = 0;
+	enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+	u8 identifier = 0;
+	u8 comp_codes_1g = 0;
+	u8 comp_codes_10g = 0;
+	u8 oui_bytes[3] = {0, 0, 0};
+	u16 enforce_sfp = 0;
+	u8 connector = 0;
+	u8 cable_length = 0;
+	u8 device_tech = 0;
+	bool active_cable = false;
+
+	DEBUGFUNC("ixgbe_identify_qsfp_module_generic");
+
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+		hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+		status = IXGBE_ERR_SFP_NOT_PRESENT;
+		goto out;
+	}
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+					     &identifier);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+		hw->phy.type = ixgbe_phy_sfp_unsupported;
+		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+		goto out;
+	}
+
+	hw->phy.id = identifier;
+
+	/* LAN ID is needed for sfp_type determination */
+	hw->mac.ops.set_lan_id(hw);
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+					     &comp_codes_10g);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+					     &comp_codes_1g);
+
+	if (status != IXGBE_SUCCESS)
+		goto err_read_i2c_eeprom;
+
+	if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+		hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+	} else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+				     IXGBE_SFF_10GBASELR_CAPABLE)) {
+		if (hw->bus.lan_id == 0)
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+		else
+			hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+	} else {
+		if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+			active_cable = true;
+
+		if (!active_cable) {
+			/* check for active DA cables that pre-date
+			 * SFF-8436 v3.6 */
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CONNECTOR,
+					&connector);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_CABLE_LENGTH,
+					&cable_length);
+
+			hw->phy.ops.read_i2c_eeprom(hw,
+					IXGBE_SFF_QSFP_DEVICE_TECH,
+					&device_tech);
+
+			if ((connector ==
+				     IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+			    (cable_length > 0) &&
+			    ((device_tech >> 4) ==
+				     IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+				active_cable = true;
+		}
+
+		if (active_cable) {
+			hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+			if (hw->bus.lan_id == 0)
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core0;
+			else
+				hw->phy.sfp_type =
+						ixgbe_sfp_type_da_act_lmt_core1;
+		} else {
+			/* unsupported module type */
+			hw->phy.type = ixgbe_phy_sfp_unsupported;
+			status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+			goto out;
+		}
+	}
+
+	if (hw->phy.sfp_type != stored_sfp_type)
+		hw->phy.sfp_setup_needed = true;
+
+	/* Determine if the QSFP+ PHY is dual speed or not. */
+	hw->phy.multispeed_fiber = false;
+	if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+	   (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+	   ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+	   (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+		hw->phy.multispeed_fiber = true;
+
+	/* Determine PHY vendor for optical modules */
+	if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+			      IXGBE_SFF_10GBASELR_CAPABLE))  {
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+					    &oui_bytes[0]);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+					    &oui_bytes[1]);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		status = hw->phy.ops.read_i2c_eeprom(hw,
+					    IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+					    &oui_bytes[2]);
+
+		if (status != IXGBE_SUCCESS)
+			goto err_read_i2c_eeprom;
+
+		vendor_oui =
+		  ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+		   (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+		   (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+		if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+			hw->phy.type = ixgbe_phy_qsfp_intel;
+		else
+			hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+		ixgbe_get_device_caps(hw, &enforce_sfp);
+		if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+			/* Make sure we're a supported PHY type */
+			if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+				status = IXGBE_SUCCESS;
+			} else {
+				if (hw->allow_unsupported_sfp == true) {
+					EWARN(hw, "WARNING: Intel (R) Network "
+					      "Connections are quality tested "
+					      "using Intel (R) Ethernet Optics."
+					      " Using untested modules is not "
+					      "supported and may cause unstable"
+					      " operation or damage to the "
+					      "module or the adapter. Intel "
+					      "Corporation is not responsible "
+					      "for any harm caused by using "
+					      "untested modules.\n", status);
+					status = IXGBE_SUCCESS;
+				} else {
+					DEBUGOUT("QSFP module not supported\n");
+					hw->phy.type =
+						ixgbe_phy_sfp_unsupported;
+					status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+				}
+			}
+		} else {
+			status = IXGBE_SUCCESS;
+		}
+	}
+
+out:
+	return status;
+
+err_read_i2c_eeprom:
+	hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+	hw->phy.id = 0;
+	hw->phy.type = ixgbe_phy_unknown;
+
+	return IXGBE_ERR_SFP_NOT_PRESENT;
+}
 
 
 /**
@@ -1374,22 +1801,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 	 * SR modules
 	 */
 	if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
-#ifdef SUPPORT_10GBASE_ER
-	    sfp_type == ixgbe_sfp_type_er_core0 ||
-#endif /* SUPPORT_10GBASE_ER */
-#ifdef SUPPORT_1000BASE_LX
 	    sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
-#endif /* SUPPORT_1000BASE_LX */
 	    sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
 	    sfp_type == ixgbe_sfp_type_1g_sx_core0)
 		sfp_type = ixgbe_sfp_type_srlr_core0;
 	else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
-#ifdef SUPPORT_10GBASE_ER
-		 sfp_type == ixgbe_sfp_type_er_core1 ||
-#endif /* SUPPORT_10GBASE_ER */
-#ifdef SUPPORT_1000BASE_LX
 		 sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
-#endif /* SUPPORT_1000BASE_LX */
 		 sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
 		 sfp_type == ixgbe_sfp_type_1g_sx_core1)
 		sfp_type = ixgbe_sfp_type_srlr_core1;
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h
index 696a0d5..c47812b 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.h
@@ -51,6 +51,15 @@ POSSIBILITY OF SUCH DAMAGE.
 #define IXGBE_SFF_CABLE_SPEC_COMP	0x3C
 #define IXGBE_SFF_SFF_8472_SWAP		0x5C
 #define IXGBE_SFF_SFF_8472_COMP		0x5E
+#define IXGBE_SFF_IDENTIFIER_QSFP_PLUS	0xD
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0	0xA5
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1	0xA6
+#define IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2	0xA7
+#define IXGBE_SFF_QSFP_CONNECTOR	0x82
+#define IXGBE_SFF_QSFP_10GBE_COMP	0x83
+#define IXGBE_SFF_QSFP_1GBE_COMP	0x86
+#define IXGBE_SFF_QSFP_CABLE_LENGTH	0x92
+#define IXGBE_SFF_QSFP_DEVICE_TECH	0x93
 
 /* Bitmasks */
 #define IXGBE_SFF_DA_PASSIVE_CABLE	0x4
@@ -61,10 +70,11 @@ POSSIBILITY OF SUCH DAMAGE.
 #define IXGBE_SFF_1GBASET_CAPABLE	0x8
 #define IXGBE_SFF_10GBASESR_CAPABLE	0x10
 #define IXGBE_SFF_10GBASELR_CAPABLE	0x20
-#ifdef SUPPORT_10GBASE_ER
-#define IXGBE_SFF_10GBASEER_CAPABLE    0x80
-#endif /* SUPPORT_10GBASE_ER */
 #define IXGBE_SFF_ADDRESSING_MODE	0x4
+#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE	0x1
+#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE	0x8
+#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE	0x23
+#define IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL	0x0
 #define IXGBE_I2C_EEPROM_READ_MASK	0x100
 #define IXGBE_I2C_EEPROM_STATUS_MASK	0x3
 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION	0x0
@@ -143,6 +153,8 @@ s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
 s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
 s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw);
 s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw);
 s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
 					u16 *list_offset,
 					u16 *data_offset);
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
index 89543c0..bfe1235 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
@@ -114,12 +114,14 @@ POSSIBILITY OF SUCH DAMAGE.
 #define IXGBE_DEV_ID_82599_SFP_EM		0x1507
 #define IXGBE_DEV_ID_82599_SFP_SF2		0x154D
 #define IXGBE_DEV_ID_82599_SFP_SF_QP		0x154A
+#define IXGBE_DEV_ID_82599_QSFP_SF_QP		0x1558
 #define IXGBE_DEV_ID_82599EN_SFP		0x1557
 #define IXGBE_SUBDEV_ID_82599EN_SFP_OCP1	0x0001
 #define IXGBE_DEV_ID_82599_XAUI_LOM		0x10FC
 #define IXGBE_DEV_ID_82599_T3_LOM		0x151C
 #define IXGBE_DEV_ID_82599_VF			0x10ED
 #define IXGBE_DEV_ID_82599_VF_HV		0x152E
+#define IXGBE_DEV_ID_82599_LS			0x154F
 #define IXGBE_DEV_ID_X540T			0x1528
 #define IXGBE_DEV_ID_X540_VF			0x1515
 #define IXGBE_DEV_ID_X540_VF_HV			0x1530
@@ -131,7 +133,10 @@ POSSIBILITY OF SUCH DAMAGE.
 #define IXGBE_CTRL_EXT		0x00018
 #define IXGBE_ESDP		0x00020
 #define IXGBE_EODSDP		0x00028
-#define IXGBE_I2CCTL		0x00028
+#define IXGBE_I2CCTL_82599	0x00028
+#define IXGBE_I2CCTL_X550	0x15F5C
+#define IXGBE_I2CCTL_BY_MAC(_hw) ((((_hw)->mac.type >= ixgbe_mac_X550) ? \
+				 IXGBE_I2CCTL_X550 : IXGBE_I2CCTL_82599))
 #define IXGBE_PHY_GPIO		0x00028
 #define IXGBE_MAC_GPIO		0x00030
 #define IXGBE_PHYINT_STATUS0	0x00100
@@ -2844,6 +2849,10 @@ enum ixgbe_phy_type {
 	ixgbe_phy_sfp_ftl_active,
 	ixgbe_phy_sfp_unknown,
 	ixgbe_phy_sfp_intel,
+	ixgbe_phy_qsfp_passive_unknown,
+	ixgbe_phy_qsfp_active_unknown,
+	ixgbe_phy_qsfp_intel,
+	ixgbe_phy_qsfp_unknown,
 	ixgbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/
 	ixgbe_phy_generic
 };
@@ -2875,14 +2884,8 @@ enum ixgbe_sfp_type {
 	ixgbe_sfp_type_1g_cu_core1 = 10,
 	ixgbe_sfp_type_1g_sx_core0 = 11,
 	ixgbe_sfp_type_1g_sx_core1 = 12,
-#ifdef SUPPORT_1000BASE_LX
 	ixgbe_sfp_type_1g_lx_core0 = 13,
 	ixgbe_sfp_type_1g_lx_core1 = 14,
-#endif /* SUPPORT_1000BASE_LX */
-#ifdef SUPPORT_10GBASE_ER
-	ixgbe_sfp_type_er_core0 = 15,
-	ixgbe_sfp_type_er_core1 = 16,
-#endif /* SUPPORT_10GBASE_ER */
 	ixgbe_sfp_type_not_present = 0xFFFE,
 	ixgbe_sfp_type_unknown = 0xFFFF
 };
@@ -2890,6 +2893,8 @@ enum ixgbe_sfp_type {
 enum ixgbe_media_type {
 	ixgbe_media_type_unknown = 0,
 	ixgbe_media_type_fiber,
+	ixgbe_media_type_fiber_qsfp,
+	ixgbe_media_type_fiber_lco,
 	ixgbe_media_type_copper,
 	ixgbe_media_type_backplane,
 	ixgbe_media_type_cx4,
@@ -3181,6 +3186,8 @@ struct ixgbe_phy_operations {
 	s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
 	s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
 	void (*i2c_bus_clear)(struct ixgbe_hw *);
+	s32 (*read_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 *val);
+	s32 (*write_i2c_combined)(struct ixgbe_hw *, u8 addr, u16 reg, u16 val);
 	s32 (*check_overtemp)(struct ixgbe_hw *);
 };
 
@@ -3235,12 +3242,15 @@ struct ixgbe_phy_info {
 	bool sfp_setup_needed;
 	u32 revision;
 	enum ixgbe_media_type media_type;
+	u32 phy_semaphore_mask;
+	u8 lan_id;
 	bool reset_disable;
 	ixgbe_autoneg_advertised autoneg_advertised;
 	enum ixgbe_smart_speed smart_speed;
 	bool smart_speed_active;
 	bool multispeed_fiber;
 	bool reset_if_overtemp;
+	bool qsfp_shared_i2c_bus;
 };
 
 #include "ixgbe_mbx.h"
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_vf.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_vf.c
index af0e0fd..a2d6e61 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_vf.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_vf.c
@@ -515,6 +515,21 @@ s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	if (!(links_reg & IXGBE_LINKS_UP))
 		goto out;
 
+	/* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
+	 * before the link status is correct
+	 */
+	if (mac->type == ixgbe_mac_82599_vf) {
+		int i;
+
+		for (i = 0; i < 5; i++) {
+			usec_delay(100);
+			links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+			if (!(links_reg & IXGBE_LINKS_UP))
+				goto out;
+		}
+	}
+
 	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
 	case IXGBE_LINKS_SPEED_10G_82599:
 		*speed = IXGBE_LINK_SPEED_10GB_FULL;
