[dpdk-dev,v1,2/3] eal: add interrupt enable/disable routines for uio_pci_generic
Commit Message
enable/disable interrupt by manipulating enable/disable bit of command register
on NIC's PCIe configuration space.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Tested-by: Qun Wan <qun.wan@intel.com>
---
lib/librte_eal/linuxapp/eal/eal_interrupts.c | 68 +++++++++++++++++++++-------
1 file changed, 52 insertions(+), 16 deletions(-)
@@ -361,6 +361,54 @@ vfio_disable_msix(struct rte_intr_handle *intr_handle) {
}
#endif
+static int
+uio_intr_disable(struct rte_intr_handle *intr_handle)
+{
+ unsigned char command_high;
+
+ /* use UIO config file descriptor for uio_pci_generic */
+ if (pread(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+ RTE_LOG(ERR, EAL,
+ "Error reading interrupts status for fd %d\n",
+ intr_handle->uio_cfg_fd);
+ return -1;
+ }
+ /* disable interrupts */
+ command_high |= 0x4;
+ if (pwrite(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+ RTE_LOG(ERR, EAL,
+ "Error disabling interrupts for fd %d\n",
+ intr_handle->uio_cfg_fd);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+uio_intr_enable(struct rte_intr_handle *intr_handle)
+{
+ unsigned char command_high;
+
+ /* use UIO config file descriptor for uio_pci_generic */
+ if (pread(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+ RTE_LOG(ERR, EAL,
+ "Error reading interrupts status for fd %d\n",
+ intr_handle->uio_cfg_fd);
+ return -1;
+ }
+ /* enable interrupts */
+ command_high &= ~0x4;
+ if (pwrite(intr_handle->uio_cfg_fd, &command_high, 1, 5) != 1) {
+ RTE_LOG(ERR, EAL,
+ "Error enabling interrupts for fd %d\n",
+ intr_handle->uio_cfg_fd);
+ return -1;
+ }
+
+ return 0;
+}
+
int
rte_intr_callback_register(struct rte_intr_handle *intr_handle,
rte_intr_callback_fn cb, void *cb_arg)
@@ -500,20 +548,14 @@ rte_intr_callback_unregister(struct rte_intr_handle *intr_handle,
int
rte_intr_enable(struct rte_intr_handle *intr_handle)
{
- const int value = 1;
-
- if (!intr_handle || intr_handle->fd < 0)
+ if (!intr_handle || intr_handle->fd < 0 || intr_handle->uio_cfg_fd < 0)
return -1;
switch (intr_handle->type){
/* write to the uio fd to enable the interrupt */
case RTE_INTR_HANDLE_UIO:
- if (write(intr_handle->fd, &value, sizeof(value)) < 0) {
- RTE_LOG(ERR, EAL,
- "Error enabling interrupts for fd %d\n",
- intr_handle->fd);
+ if (uio_intr_enable(intr_handle))
return -1;
- }
break;
/* not used at this moment */
case RTE_INTR_HANDLE_ALARM:
@@ -546,20 +588,14 @@ rte_intr_enable(struct rte_intr_handle *intr_handle)
int
rte_intr_disable(struct rte_intr_handle *intr_handle)
{
- const int value = 0;
-
- if (!intr_handle || intr_handle->fd < 0)
+ if (!intr_handle || intr_handle->fd < 0 || intr_handle->uio_cfg_fd < 0)
return -1;
switch (intr_handle->type){
/* write to the uio fd to disable the interrupt */
case RTE_INTR_HANDLE_UIO:
- if (write(intr_handle->fd, &value, sizeof(value)) < 0){
- RTE_LOG(ERR, EAL,
- "Error disabling interrupts for fd %d\n",
- intr_handle->fd);
+ if (uio_intr_disable(intr_handle))
return -1;
- }
break;
/* not used at this moment */
case RTE_INTR_HANDLE_ALARM: