[dpdk-dev,32/36] ixgbe base codes: Setup kx4 phy
Commit Message
Setup kx4 phy for x550em;
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h | 14 +++++++++--
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c | 44 ++++++++++++++++++++++++++++++++-
2 files changed, 55 insertions(+), 3 deletions(-)
@@ -3825,6 +3825,15 @@ struct ixgbe_hw {
#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN (1 << 3)
#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN (1 << 31)
+#define IXGBE_KX4_LINK_CNTL_1 0x4C
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX (1 << 16)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 (1 << 17)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX (1 << 24)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_EEE_CAP_KX4 (1 << 25)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE (1 << 29)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_FORCE_LINK_UP (1 << 30)
+#define IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART (1 << 31)
+
#define IXGBE_SB_IOSF_INDIRECT_CTRL 0x00011144
#define IXGBE_SB_IOSF_INDIRECT_DATA 0x00011148
@@ -3841,7 +3850,8 @@ struct ixgbe_hw {
#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT 31
#define IXGBE_SB_IOSF_CTRL_BUSY (1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
#define IXGBE_SB_IOSF_TARGET_KR_PHY 0
-#define IXGBE_SB_IOSF_TARGET_KX4_PHY 1
-#define IXGBE_SB_IOSF_TARGET_KX4_PCS 2
+#define IXGBE_SB_IOSF_TARGET_KX4_UNIPHY 1
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS0 2
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS1 3
#endif /* _IXGBE_TYPE_H_ */
@@ -940,6 +940,11 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
/* Set functions pointers based on phy type */
switch (hw->phy.type) {
+ case ixgbe_phy_x550em_kx4:
+ phy->ops.setup_link = ixgbe_setup_kx4_x550em;
+ phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
+ phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
+ break;
case ixgbe_phy_x550em_kr:
phy->ops.setup_link = ixgbe_setup_kr_x550em;
phy->ops.read_reg = ixgbe_read_phy_reg_x550em;
@@ -1194,7 +1199,44 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
}
/**
- * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI.
+ * ixgbe_setup_kx4_x550em - Configure the KX4 PHY.
+ * @hw: pointer to hardware structure
+ *
+ * Configures the integrated KX4 PHY.
+ **/
+s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 reg_val;
+
+ status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS0 + hw->bus.lan_id, ®_val);
+ if (status)
+ return status;
+
+ reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 |
+ IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX);
+
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE;
+
+ /* Advertise 10G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4;
+
+ /* Advertise 1G support. */
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX;
+
+ /* Restart auto-negotiation. */
+ reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART;
+ status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1,
+ IXGBE_SB_IOSF_TARGET_KX4_PCS0 + hw->bus.lan_id, reg_val);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode.
* @hw: pointer to hardware structure
* @speed: the link speed to force
*