[dpdk-dev,v3,08/20] testpmd: add csum parse_tunnel command
Commit Message
Add a new command related to csum forward engine:
csum parse-tunnel (on|off) (tx_port_id)
If enabled, the tunnel packets received by the csum forward engine are
parsed and seen as "outer-headers/inner-headers/data".
If disabled, the parsing of the csum forward engine stops at the first
l4 layer. A tunnel packet is seens as "headers/data" (inner headers are
included in payload).
Note: the port argument is the tx_port. It's more coherent compared
to all other testpmd csum flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
app/test-pmd/cmdline.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++
app/test-pmd/csumonly.c | 3 ++-
app/test-pmd/testpmd.h | 5 +++-
3 files changed, 72 insertions(+), 2 deletions(-)
@@ -327,6 +327,12 @@ static void cmd_help_long_parsed(void *parsed_result,
" the forward engine)\n"
" Please check the NIC datasheet for HW limits.\n\n"
+ "csum parse-tunnel (on|off) (tx_port_id)\n"
+ " If disabled, treat tunnel packets as non-tunneled"
+ " packets (treat inner headers as payload). The port\n"
+ " argument is the port used for TX in csum forward"
+ " engine.\n\n"
+
"csum show (port_id)\n"
" Display tx checksum offload configuration\n\n"
@@ -2889,6 +2895,8 @@ csum_show(int port_id)
uint16_t ol_flags;
ol_flags = ports[port_id].tx_ol_flags;
+ printf("Parse tunnel is %s\n",
+ (ol_flags & TESTPMD_TX_OFFLOAD_PARSE_TUNNEL) ? "on" : "off");
printf("IP checksum offload is %s\n",
(ol_flags & TESTPMD_TX_OFFLOAD_IP_CKSUM) ? "hw" : "sw");
printf("UDP checksum offload is %s\n",
@@ -3011,6 +3019,63 @@ cmdline_parse_inst_t cmd_csum_show = {
},
};
+/* Enable/disable tunnel parsing */
+struct cmd_csum_tunnel_result {
+ cmdline_fixed_string_t csum;
+ cmdline_fixed_string_t parse;
+ cmdline_fixed_string_t onoff;
+ uint8_t port_id;
+};
+
+static void
+cmd_csum_tunnel_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_csum_tunnel_result *res = parsed_result;
+
+ if (port_id_is_invalid(res->port_id)) {
+ printf("invalid port %d\n", res->port_id);
+ return;
+ }
+
+ if (!strcmp(res->onoff, "on"))
+ ports[res->port_id].tx_ol_flags |=
+ TESTPMD_TX_OFFLOAD_PARSE_TUNNEL;
+ else
+ ports[res->port_id].tx_ol_flags &=
+ (~TESTPMD_TX_OFFLOAD_PARSE_TUNNEL);
+
+ csum_show(res->port_id);
+}
+
+cmdline_parse_token_string_t cmd_csum_tunnel_csum =
+ TOKEN_STRING_INITIALIZER(struct cmd_csum_tunnel_result,
+ csum, "csum");
+cmdline_parse_token_string_t cmd_csum_tunnel_parse =
+ TOKEN_STRING_INITIALIZER(struct cmd_csum_tunnel_result,
+ parse, "parse_tunnel");
+cmdline_parse_token_string_t cmd_csum_tunnel_onoff =
+ TOKEN_STRING_INITIALIZER(struct cmd_csum_tunnel_result,
+ onoff, "on#off");
+cmdline_parse_token_num_t cmd_csum_tunnel_portid =
+ TOKEN_NUM_INITIALIZER(struct cmd_csum_tunnel_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_csum_tunnel = {
+ .f = cmd_csum_tunnel_parsed,
+ .data = NULL,
+ .help_str = "enable/disable parsing of tunnels for csum engine: "
+ "csum parse_tunnel on|off <tx-port>",
+ .tokens = {
+ (void *)&cmd_csum_tunnel_csum,
+ (void *)&cmd_csum_tunnel_parse,
+ (void *)&cmd_csum_tunnel_onoff,
+ (void *)&cmd_csum_tunnel_portid,
+ NULL,
+ },
+};
+
/* *** ENABLE HARDWARE SEGMENTATION IN TX PACKETS *** */
struct cmd_tso_set_result {
cmdline_fixed_string_t tso;
@@ -9060,6 +9125,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_tx_vlan_set_pvid,
(cmdline_parse_inst_t *)&cmd_csum_set,
(cmdline_parse_inst_t *)&cmd_csum_show,
+ (cmdline_parse_inst_t *)&cmd_csum_tunnel,
(cmdline_parse_inst_t *)&cmd_tso_set,
(cmdline_parse_inst_t *)&cmd_tso_show,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set,
@@ -373,7 +373,8 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
l3_hdr = (char *)eth_hdr + l2_len;
/* check if it's a supported tunnel (only vxlan for now) */
- if (l4_proto == IPPROTO_UDP) {
+ if ((testpmd_ol_flags & TESTPMD_TX_OFFLOAD_PARSE_TUNNEL) &&
+ l4_proto == IPPROTO_UDP) {
udp_hdr = (struct udp_hdr *)((char *)l3_hdr + l3_len);
/* check udp destination port, 4789 is the default
@@ -127,8 +127,11 @@ struct fwd_stream {
#define TESTPMD_TX_OFFLOAD_SCTP_CKSUM 0x0008
/** Offload VxLAN checksum in csum forward engine */
#define TESTPMD_TX_OFFLOAD_VXLAN_CKSUM 0x0010
+/** Parse tunnel in csum forward engine. If set, dissect tunnel headers
+ * of rx packets. If not set, treat inner headers as payload. */
+#define TESTPMD_TX_OFFLOAD_PARSE_TUNNEL 0x0020
/** Insert VLAN header in forward engine */
-#define TESTPMD_TX_OFFLOAD_INSERT_VLAN 0x0020
+#define TESTPMD_TX_OFFLOAD_INSERT_VLAN 0x0040
/**
* The data structure associated with each port.