diff mbox

[dpdk-dev,1/4] enic: enable NIC max packet size discovery

Message ID 1466140969-5580-2-git-send-email-johndale@cisco.com (mailing list archive)
State Superseded, archived
Delegated to: Bruce Richardson
Headers

Commit Message

John Daley (johndale) June 17, 2016, 5:22 a.m. UTC 
  Pull in common VNIC code which enables querying for max egress
packet size.

Signed-off-by: John Daley <johndale@cisco.com>
---
There are some non-related fields and defines in this file because
it is shared with other drivers and interfaces to the VIC.

 drivers/net/enic/base/vnic_enet.h | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

Comments

Bruce Richardson June 24, 2016, 10:56 a.m. UTC | #1 
On Thu, Jun 16, 2016 at 10:22:46PM -0700, John Daley wrote:
> Pull in common VNIC code which enables querying for max egress
> packet size.
> 
With this patch applied is the user able to query the max packet size, or is it
just that the driver is able to do so for use by other functions?

/Bruce
diff mbox

Patch

diff --git a/drivers/net/enic/base/vnic_enet.h b/drivers/net/enic/base/vnic_enet.h
index cc34998..5062247 100644
--- a/drivers/net/enic/base/vnic_enet.h
+++ b/drivers/net/enic/base/vnic_enet.h
@@ -35,6 +35,10 @@ 
 #ifndef _VNIC_ENIC_H_
 #define _VNIC_ENIC_H_
 
+/* Hardware intr coalesce timer is in units of 1.5us */
+#define INTR_COALESCE_USEC_TO_HW(usec) ((usec) * 2 / 3)
+#define INTR_COALESCE_HW_TO_USEC(usec) ((usec) * 3 / 2)
+
 /* Device-specific region: enet configuration */
 struct vnic_enet_config {
 	u32 flags;
@@ -50,6 +54,12 @@  struct vnic_enet_config {
 	u16 vf_rq_count;
 	u16 num_arfs;
 	u64 mem_paddr;
+	u16 rdma_qp_id;
+	u16 rdma_qp_count;
+	u16 rdma_resgrp;
+	u32 rdma_mr_id;
+	u32 rdma_mr_count;
+	u32 max_pkt_size;
 };
 
 #define VENETF_TSO		0x1	/* TSO enabled */
@@ -64,9 +74,14 @@  struct vnic_enet_config {
 #define VENETF_RSSHASH_IPV6_EX	0x200	/* Hash on IPv6 extended fields */
 #define VENETF_RSSHASH_TCPIPV6_EX 0x400	/* Hash on TCP + IPv6 ext. fields */
 #define VENETF_LOOP		0x800	/* Loopback enabled */
-#define VENETF_VMQ		0x4000  /* using VMQ flag for VMware NETQ */
+#define VENETF_FAILOVER		0x1000	/* Fabric failover enabled */
+#define VENETF_USPACE_NIC       0x2000	/* vHPC enabled */
+#define VENETF_VMQ      0x4000 /* VMQ enabled */
+#define VENETF_ARFS		0x8000  /* ARFS enabled */
 #define VENETF_VXLAN    0x10000 /* VxLAN offload */
 #define VENETF_NVGRE    0x20000 /* NVGRE offload */
+#define VENETF_GRPINTR  0x40000 /* group interrupt */
+
 #define VENET_INTR_TYPE_MIN	0	/* Timer specs min interrupt spacing */
 #define VENET_INTR_TYPE_IDLE	1	/* Timer specs idle time before irq */