diff mbox

[dpdk-dev] net/enic: heed VLAN strip flag in device configure function

Message ID 1468968225-32717-1-git-send-email-johndale@cisco.com (mailing list archive)
State Accepted, archived
Headers show

Commit Message

John Daley July 19, 2016, 10:43 p.m. UTC
The configure function enicpmd_dev_configure() was not paying attention
to the rxmode VLAN strip bit. Set the VLAN strip mode according to the bit.

Fixes: fefed3d1e62c ("enic: new driver")

Signed-off-by: John Daley <johndale@cisco.com>
---

Although not critical, it is low risk and would be nice to have in 16_07.

 drivers/net/enic/enic_ethdev.c | 1 +
 1 file changed, 1 insertion(+)

Comments

David Harton July 20, 2016, 2:05 a.m. UTC | #1
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of John Daley (johndale)
> Sent: Tuesday, July 19, 2016 6:44 PM
> To: dev@dpdk.org
> Cc: bruce.richardson@intel.com; John Daley (johndale) <johndale@cisco.com>
> Subject: [dpdk-dev] [PATCH] net/enic: heed VLAN strip flag in device
> configure function
> 
> The configure function enicpmd_dev_configure() was not paying attention to
> the rxmode VLAN strip bit. Set the VLAN strip mode according to the bit.
> 
> Fixes: fefed3d1e62c ("enic: new driver")
> 
> Signed-off-by: John Daley <johndale@cisco.com>
> ---
> 
> Although not critical, it is low risk and would be nice to have in 16_07.
> 
>  drivers/net/enic/enic_ethdev.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/enic/enic_ethdev.c
> b/drivers/net/enic/enic_ethdev.c index 59082d2..47b07c9 100644
> --- a/drivers/net/enic/enic_ethdev.c
> +++ b/drivers/net/enic/enic_ethdev.c
> @@ -356,6 +356,7 @@ static int enicpmd_dev_configure(struct rte_eth_dev
> *eth_dev)
>  			eth_dev->data->dev_conf.rxmode.split_hdr_size);
>  	}
> 
> +	enicpmd_vlan_offload_set(eth_dev, ETH_VLAN_STRIP_MASK);
>  	enic->hw_ip_checksum = eth_dev->data-
> >dev_conf.rxmode.hw_ip_checksum;
>  	return 0;
>  }
> --
> 2.7.0

Reviewed-by: David Harton <dharton@cisco.com>
Tested-by: David Harton <dharton@cisco.com>
Thomas Monjalon July 21, 2016, 10:52 p.m. UTC | #2
> > The configure function enicpmd_dev_configure() was not paying attention to
> > the rxmode VLAN strip bit. Set the VLAN strip mode according to the bit.
> > 
> > Fixes: fefed3d1e62c ("enic: new driver")
> > 
> > Signed-off-by: John Daley <johndale@cisco.com>
> 
> Reviewed-by: David Harton <dharton@cisco.com>
> Tested-by: David Harton <dharton@cisco.com>

Applied, thanks
diff mbox

Patch

diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 59082d2..47b07c9 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -356,6 +356,7 @@  static int enicpmd_dev_configure(struct rte_eth_dev *eth_dev)
 			eth_dev->data->dev_conf.rxmode.split_hdr_size);
 	}
 
+	enicpmd_vlan_offload_set(eth_dev, ETH_VLAN_STRIP_MASK);
 	enic->hw_ip_checksum = eth_dev->data->dev_conf.rxmode.hw_ip_checksum;
 	return 0;
 }