[dpdk-dev] net/igb: add i210 flashless device ids
Checks
Commit Message
This patch adds two missing device IDs for Intel i210 chips in flashless
mode. Copper flashless mode was tested on a PC Engines APU2C4 board.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
---
drivers/net/e1000/igb_ethdev.c | 2 ++
1 file changed, 2 insertions(+)
Comments
On 8/21/2017 12:47 PM, Markus Theil wrote:
> This patch adds two missing device IDs for Intel i210 chips in flashless
> mode. Copper flashless mode was tested on a PC Engines APU2C4 board.
There is no comment on this patch.
Adding new device support looks harmless, at worst we can remove them
back, so I will get this.
But that would be very helpful if anybody having these devices tests them.
>
> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
> ---
> drivers/net/e1000/igb_ethdev.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
> index e4f7a9f..cf1fdbe 100644
> --- a/drivers/net/e1000/igb_ethdev.c
> +++ b/drivers/net/e1000/igb_ethdev.c
> @@ -334,6 +334,8 @@ static const struct rte_pci_id pci_id_igb_map[] = {
> { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_FIBER) },
> { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SERDES) },
> { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SGMII) },
> + { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_COPPER_FLASHLESS) },
> + { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SERDES_FLASHLESS) },
> { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I211_COPPER) },
> { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
> { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_SGMII) },
>
On 8/21/2017 12:47 PM, Markus Theil wrote:
> This patch adds two missing device IDs for Intel i210 chips in flashless
> mode. Copper flashless mode was tested on a PC Engines APU2C4 board.
>
> Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Applied to dpdk-next-net/master, thanks.
@@ -334,6 +334,8 @@ static const struct rte_pci_id pci_id_igb_map[] = {
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_FIBER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SERDES) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SGMII) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_COPPER_FLASHLESS) },
+ { RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I210_SERDES_FLASHLESS) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I211_COPPER) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_BACKPLANE_1GBPS) },
{ RTE_PCI_DEVICE(E1000_INTEL_VENDOR_ID, E1000_DEV_ID_I354_SGMII) },