@@ -6,85 +6,7 @@
#define __TAP_BPF_H__
#include <tap_autoconf.h>
-
-/* Do not #include <linux/bpf.h> since eBPF must compile on different
- * distros which may include partial definitions for eBPF (while the
- * kernel itself may support eBPF). Instead define here all that is needed
- */
-
-/* BPF_MAP_UPDATE_ELEM command flags */
-#define BPF_ANY 0 /* create a new element or update an existing */
-
-/* BPF architecture instruction struct */
-struct bpf_insn {
- __u8 code;
- __u8 dst_reg:4;
- __u8 src_reg:4;
- __s16 off;
- __s32 imm; /* immediate value */
-};
-
-/* BPF program types */
-enum bpf_prog_type {
- BPF_PROG_TYPE_UNSPEC,
- BPF_PROG_TYPE_SOCKET_FILTER,
- BPF_PROG_TYPE_KPROBE,
- BPF_PROG_TYPE_SCHED_CLS,
- BPF_PROG_TYPE_SCHED_ACT,
-};
-
-/* BPF commands types */
-enum bpf_cmd {
- BPF_MAP_CREATE,
- BPF_MAP_LOOKUP_ELEM,
- BPF_MAP_UPDATE_ELEM,
- BPF_MAP_DELETE_ELEM,
- BPF_MAP_GET_NEXT_KEY,
- BPF_PROG_LOAD,
-};
-
-/* BPF maps types */
-enum bpf_map_type {
- BPF_MAP_TYPE_UNSPEC,
- BPF_MAP_TYPE_HASH,
-};
-
-/* union of anonymous structs used with TAP BPF commands */
-union bpf_attr {
- /* BPF_MAP_CREATE command */
- struct {
- __u32 map_type;
- __u32 key_size;
- __u32 value_size;
- __u32 max_entries;
- __u32 map_flags;
- __u32 inner_map_fd;
- };
-
- /* BPF_MAP_UPDATE_ELEM, BPF_MAP_DELETE_ELEM commands */
- struct {
- __u32 map_fd;
- __aligned_u64 key;
- union {
- __aligned_u64 value;
- __aligned_u64 next_key;
- };
- __u64 flags;
- };
-
- /* BPF_PROG_LOAD command */
- struct {
- __u32 prog_type;
- __u32 insn_cnt;
- __aligned_u64 insns;
- __aligned_u64 license;
- __u32 log_level;
- __u32 log_size;
- __aligned_u64 log_buf;
- __u32 kern_version;
- __u32 prog_flags;
- };
-} __attribute__((aligned(8)));
+#include <bpf_def.h>
#ifndef __NR_bpf
# if defined(__i386__)
@@ -20,5 +20,6 @@ SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include := rte_ip.h rte_tcp.h rte_udp.h rte_esp
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_sctp.h rte_icmp.h rte_arp.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h
SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += bpf_def.h
include $(RTE_SDK)/mk/rte.lib.mk
new file mode 100644
@@ -0,0 +1,370 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+ * Copyright 2017 Mellanox Technologies, Ltd.
+ */
+
+#ifndef _RTE_BPF_DEF_H_
+#define _RTE_BPF_DEF_H_
+
+#ifdef __linux__
+#include <linux/types.h>
+#else
+
+typedef uint8_t __u8;
+typedef uint16_t __u16;
+typedef uint32_t __u32;
+typedef uint64_t __u64;
+
+typedef int8_t __s8;
+typedef int16_t __s16;
+typedef int32_t __s32;
+
+#define __aligned_u64 __u64 __attribute__((aligned(8)))
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Do not #include <linux/bpf.h> since eBPF must compile on different
+ * distros which may include partial definitions for eBPF (while the
+ * kernel itself may support eBPF). Instead define here all that is needed
+ * by various DPDK components.
+ */
+
+/* Instruction classes */
+#define BPF_CLASS(code) ((code) & 0x07)
+#define BPF_LD 0x00
+#define BPF_LDX 0x01
+#define BPF_ST 0x02
+#define BPF_STX 0x03
+#define BPF_ALU 0x04
+#define BPF_JMP 0x05
+#define BPF_RET 0x06
+#define BPF_MISC 0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code) ((code) & 0x18)
+#define BPF_W 0x00
+#define BPF_H 0x08
+#define BPF_B 0x10
+#define BPF_MODE(code) ((code) & 0xe0)
+#define BPF_IMM 0x00
+#define BPF_ABS 0x20
+#define BPF_IND 0x40
+#define BPF_MEM 0x60
+#define BPF_LEN 0x80
+#define BPF_MSH 0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code) ((code) & 0xf0)
+#define BPF_ADD 0x00
+#define BPF_SUB 0x10
+#define BPF_MUL 0x20
+#define BPF_DIV 0x30
+#define BPF_OR 0x40
+#define BPF_AND 0x50
+#define BPF_LSH 0x60
+#define BPF_RSH 0x70
+#define BPF_NEG 0x80
+#define BPF_MOD 0x90
+#define BPF_XOR 0xa0
+
+#define BPF_JA 0x00
+#define BPF_JEQ 0x10
+#define BPF_JGT 0x20
+#define BPF_JGE 0x30
+#define BPF_JSET 0x40
+#define BPF_SRC(code) ((code) & 0x08)
+#define BPF_K 0x00
+#define BPF_X 0x08
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/* Extended instruction set based on top of classic BPF */
+
+/* instruction classes */
+#define BPF_ALU64 0x07 /* alu mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW 0x18 /* double word */
+#define BPF_XADD 0xc0 /* exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV 0xb0 /* mov reg to reg */
+#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */
+
+/* change endianness of a register */
+#define BPF_END 0xd0 /* flags for endianness conversion: */
+#define BPF_TO_LE 0x00 /* convert to little-endian */
+#define BPF_TO_BE 0x08 /* convert to big-endian */
+#define BPF_FROM_LE BPF_TO_LE
+#define BPF_FROM_BE BPF_TO_BE
+
+/* jmp encodings */
+#define BPF_JNE 0x50 /* jump != */
+#define BPF_JLT 0xa0 /* LT is unsigned, '<' */
+#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */
+#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */
+#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */
+#define BPF_JSLT 0xc0 /* SLT is signed, '<' */
+#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */
+#define BPF_CALL 0x80 /* function call */
+#define BPF_EXIT 0x90 /* function return */
+
+/* Register numbers */
+enum {
+ BPF_REG_0 = 0,
+ BPF_REG_1,
+ BPF_REG_2,
+ BPF_REG_3,
+ BPF_REG_4,
+ BPF_REG_5,
+ BPF_REG_6,
+ BPF_REG_7,
+ BPF_REG_8,
+ BPF_REG_9,
+ BPF_REG_10,
+ __MAX_BPF_REG,
+};
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG __MAX_BPF_REG
+
+struct bpf_insn {
+ __u8 code; /* opcode */
+ __u8 dst_reg:4; /* dest register */
+ __u8 src_reg:4; /* source register */
+ __s16 off; /* signed offset */
+ __s32 imm; /* signed immediate constant */
+};
+
+/* BPF syscall commands, see bpf(2) man-page for details. */
+enum bpf_cmd {
+ BPF_MAP_CREATE,
+ BPF_MAP_LOOKUP_ELEM,
+ BPF_MAP_UPDATE_ELEM,
+ BPF_MAP_DELETE_ELEM,
+ BPF_MAP_GET_NEXT_KEY,
+ BPF_PROG_LOAD,
+ BPF_OBJ_PIN,
+ BPF_OBJ_GET,
+ BPF_PROG_ATTACH,
+ BPF_PROG_DETACH,
+ BPF_PROG_TEST_RUN,
+ BPF_PROG_GET_NEXT_ID,
+ BPF_MAP_GET_NEXT_ID,
+ BPF_PROG_GET_FD_BY_ID,
+ BPF_MAP_GET_FD_BY_ID,
+ BPF_OBJ_GET_INFO_BY_FD,
+};
+
+enum bpf_map_type {
+ BPF_MAP_TYPE_UNSPEC,
+ BPF_MAP_TYPE_HASH,
+ BPF_MAP_TYPE_ARRAY,
+ BPF_MAP_TYPE_PROG_ARRAY,
+ BPF_MAP_TYPE_PERF_EVENT_ARRAY,
+ BPF_MAP_TYPE_PERCPU_HASH,
+ BPF_MAP_TYPE_PERCPU_ARRAY,
+ BPF_MAP_TYPE_STACK_TRACE,
+ BPF_MAP_TYPE_CGROUP_ARRAY,
+ BPF_MAP_TYPE_LRU_HASH,
+ BPF_MAP_TYPE_LRU_PERCPU_HASH,
+ BPF_MAP_TYPE_LPM_TRIE,
+ BPF_MAP_TYPE_ARRAY_OF_MAPS,
+ BPF_MAP_TYPE_HASH_OF_MAPS,
+ BPF_MAP_TYPE_DEVMAP,
+ BPF_MAP_TYPE_SOCKMAP,
+};
+
+enum bpf_prog_type {
+ BPF_PROG_TYPE_UNSPEC,
+ BPF_PROG_TYPE_SOCKET_FILTER,
+ BPF_PROG_TYPE_KPROBE,
+ BPF_PROG_TYPE_SCHED_CLS,
+ BPF_PROG_TYPE_SCHED_ACT,
+ BPF_PROG_TYPE_TRACEPOINT,
+ BPF_PROG_TYPE_XDP,
+ BPF_PROG_TYPE_PERF_EVENT,
+ BPF_PROG_TYPE_CGROUP_SKB,
+ BPF_PROG_TYPE_CGROUP_SOCK,
+ BPF_PROG_TYPE_LWT_IN,
+ BPF_PROG_TYPE_LWT_OUT,
+ BPF_PROG_TYPE_LWT_XMIT,
+ BPF_PROG_TYPE_SOCK_OPS,
+ BPF_PROG_TYPE_SK_SKB,
+};
+
+enum bpf_attach_type {
+ BPF_CGROUP_INET_INGRESS,
+ BPF_CGROUP_INET_EGRESS,
+ BPF_CGROUP_INET_SOCK_CREATE,
+ BPF_CGROUP_SOCK_OPS,
+ BPF_SK_SKB_STREAM_PARSER,
+ BPF_SK_SKB_STREAM_VERDICT,
+ __MAX_BPF_ATTACH_TYPE
+};
+
+#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE
+
+/* If BPF_F_ALLOW_OVERRIDE flag is used in BPF_PROG_ATTACH command
+ * to the given target_fd cgroup the descendent cgroup will be able to
+ * override effective bpf program that was inherited from this cgroup
+ */
+#define BPF_F_ALLOW_OVERRIDE (1U << 0)
+
+/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
+ * verifier will perform strict alignment checking as if the kernel
+ * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
+ * and NET_IP_ALIGN defined to 2.
+ */
+#define BPF_F_STRICT_ALIGNMENT (1U << 0)
+
+#define BPF_PSEUDO_MAP_FD 1
+
+/* flags for BPF_MAP_UPDATE_ELEM command */
+#define BPF_ANY 0 /* create new element or update existing */
+#define BPF_NOEXIST 1 /* create new element if it didn't exist */
+#define BPF_EXIST 2 /* update existing element */
+
+/* flags for BPF_MAP_CREATE command */
+#define BPF_F_NO_PREALLOC (1U << 0)
+/* Instead of having one common LRU list in the
+ * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list
+ * which can scale and perform better.
+ * Note, the LRU nodes (including free nodes) cannot be moved
+ * across different LRU lists.
+ */
+#define BPF_F_NO_COMMON_LRU (1U << 1)
+/* Specify numa node during map creation */
+#define BPF_F_NUMA_NODE (1U << 2)
+
+union bpf_attr {
+ struct { /* anonymous struct used by BPF_MAP_CREATE command */
+ __u32 map_type; /* one of enum bpf_map_type */
+ __u32 key_size; /* size of key in bytes */
+ __u32 value_size; /* size of value in bytes */
+ __u32 max_entries; /* max number of entries in a map */
+ __u32 map_flags; /* BPF_MAP_CREATE related
+ * flags defined above.
+ */
+ __u32 inner_map_fd; /* fd pointing to the inner map */
+ __u32 numa_node; /* numa node (effective only if
+ * BPF_F_NUMA_NODE is set).
+ */
+ };
+
+ struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
+ __u32 map_fd;
+ __aligned_u64 key;
+ union {
+ __aligned_u64 value;
+ __aligned_u64 next_key;
+ };
+ __u64 flags;
+ };
+
+ struct { /* anonymous struct used by BPF_PROG_LOAD command */
+ __u32 prog_type; /* one of enum bpf_prog_type */
+ __u32 insn_cnt;
+ __aligned_u64 insns;
+ __aligned_u64 license;
+ __u32 log_level;
+ /* verbosity level of verifier */
+ __u32 log_size; /* size of user buffer */
+ __aligned_u64 log_buf; /* user supplied buffer */
+ __u32 kern_version;
+ /* checked when prog_type=kprobe */
+ __u32 prog_flags;
+ };
+
+ struct { /* anonymous struct used by BPF_OBJ_* commands */
+ __aligned_u64 pathname;
+ __u32 bpf_fd;
+ };
+
+ struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */
+ __u32 target_fd;
+ /* container object to attach to */
+ __u32 attach_bpf_fd; /* eBPF program to attach */
+ __u32 attach_type;
+ __u32 attach_flags;
+ };
+
+ struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */
+ __u32 prog_fd;
+ __u32 retval;
+ __u32 data_size_in;
+ __u32 data_size_out;
+ __aligned_u64 data_in;
+ __aligned_u64 data_out;
+ __u32 repeat;
+ __u32 duration;
+ } test;
+
+ struct { /* anonymous struct used by BPF_*_GET_*_ID */
+ union {
+ __u32 start_id;
+ __u32 prog_id;
+ __u32 map_id;
+ };
+ __u32 next_id;
+ };
+
+ struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */
+ __u32 bpf_fd;
+ __u32 info_len;
+ __aligned_u64 info;
+ } info;
+} __attribute__((aligned(8)));
+
+/* Generic BPF return codes which all BPF program types may support.
+ * The values are binary compatible with their TC_ACT_* counter-part to
+ * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT
+ * programs.
+ *
+ * XDP is handled seprately, see XDP_*.
+ */
+enum bpf_ret_code {
+ BPF_OK = 0,
+ /* 1 reserved */
+ BPF_DROP = 2,
+ /* 3-6 reserved */
+ BPF_REDIRECT = 7,
+ /* >127 are reserved for prog type specific return codes */
+};
+
+enum sk_action {
+ SK_DROP = 0,
+ SK_PASS,
+};
+
+#define BPF_TAG_SIZE 8
+
+struct bpf_prog_info {
+ __u32 type;
+ __u32 id;
+ __u8 tag[BPF_TAG_SIZE];
+ __u32 jited_prog_len;
+ __u32 xlated_prog_len;
+ __aligned_u64 jited_prog_insns;
+ __aligned_u64 xlated_prog_insns;
+} __attribute__((aligned(8)));
+
+struct bpf_map_info {
+ __u32 type;
+ __u32 id;
+ __u32 key_size;
+ __u32 value_size;
+ __u32 max_entries;
+ __u32 map_flags;
+} __attribute__((aligned(8)));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_BPF_DEF_H_ */
@@ -12,7 +12,8 @@ headers = files('rte_ip.h',
'rte_ether.h',
'rte_gre.h',
'rte_net.h',
- 'rte_net_crc.h')
+ 'rte_net_crc.h',
+ 'bpf_def.h')
sources = files('rte_arp.c', 'rte_net.c', 'rte_net_crc.c')
deps += ['mbuf']