diff --git a/MAINTAINERS b/MAINTAINERS
index 5967c1d..bbc4d40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -586,6 +586,14 @@ F: drivers/net/mvpp2/
 F: doc/guides/nics/mvpp2.rst
 F: doc/guides/nics/features/mvpp2.ini
 
+Marvell mvneta
+M: Zyta Szpak <zr@semihalf.com>
+M: Dmitri Epshtein <dima@marvell.com>
+M: Natalie Samsonov <nsamsono@marvell.com>
+F: drivers/net/mvneta/
+F: doc/guides/nics/mvneta.rst
+F: doc/guides/nics/features/mvneta.ini
+
 Mellanox mlx4
 M: Matan Azrad <matan@mellanox.com>
 M: Shahaf Shuler <shahafs@mellanox.com>
diff --git a/config/common_base b/config/common_base
index 155c7d4..1f8410b 100644
--- a/config/common_base
+++ b/config/common_base
@@ -400,6 +400,11 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
 CONFIG_RTE_LIBRTE_MVPP2_PMD=n
 
 #
+# Compile Marvell MVNETA PMD driver
+#
+CONFIG_RTE_LIBRTE_MVNETA_PMD=n
+
+#
 # Compile support for VMBus library
 #
 CONFIG_RTE_LIBRTE_VMBUS=n
diff --git a/devtools/test-build.sh b/devtools/test-build.sh
index 1eee241..2990978 100755
--- a/devtools/test-build.sh
+++ b/devtools/test-build.sh
@@ -182,6 +182,8 @@ config () # <directory> <target> <options>
 		sed -ri    's,(PMD_MVSAM_CRYPTO=)n,\1y,' $1/.config
 		test -z "$LIBMUSDK_PATH" || \
 		sed -ri          's,(MVPP2_PMD=)n,\1y,' $1/.config
+		test -z "$LIBMUSDK_PATH" || \
+		sed -ri          's,(MVNETA_PMD=)n,\1y,' $1/.config
 		build_config_hook $1 $2 $3
 
 		# Explicit enabler/disabler (uppercase)
diff --git a/doc/guides/nics/features/mvneta.ini b/doc/guides/nics/features/mvneta.ini
new file mode 100644
index 0000000..ba6fe4b
--- /dev/null
+++ b/doc/guides/nics/features/mvneta.ini
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'mvneta' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Speed capabilities   = Y
+Jumbo frame          = Y
+CRC offload          = Y
+ARMv8                = Y
+Usage doc            = Y
diff --git a/doc/guides/nics/mvneta.rst b/doc/guides/nics/mvneta.rst
new file mode 100644
index 0000000..bf08417
--- /dev/null
+++ b/doc/guides/nics/mvneta.rst
@@ -0,0 +1,152 @@
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2018 Marvell International Ltd.
+    Copyright(c) 2018 Semihalf.
+    All rights reserved.
+
+MVNETA Poll Mode Driver
+=======================
+
+The MVNETA PMD (librte_pmd_mvneta) provides poll mode driver support
+for the Marvell NETA 1/2.5 Gbps adapter.
+
+Detailed information about SoCs that use PPv2 can be obtained here:
+
+* https://www.marvell.com/embedded-processors/armada-3700/
+
+.. Note::
+
+   Due to external dependencies, this driver is disabled by default. It must
+   be enabled manually by setting relevant configuration option manually.
+   Please refer to `Config File Options`_ section for further details.
+
+
+Features
+--------
+
+Features of the MVNETA PMD are:
+
+- Start/stop
+- tx/rx_queue_setup
+- Speed capabilities
+- Jumbo frame
+- CRC offload
+
+
+Limitations
+-----------
+
+- Flushing vlans added for filtering is not possible due to MUSDK missing
+  functionality. Current workaround is to reset board so that NETA has a
+  chance to start in a sane state.
+
+Prerequisites
+-------------
+
+- Custom Linux Kernel sources
+
+  .. code-block:: console
+
+     git clone https://github.com/MarvellEmbeddedProcessors/linux-marvell.git -b linux-4.4.52-armada-17.10
+
+
+- MUSDK (Marvell User-Space SDK) sources
+
+  .. code-block:: console
+
+      git clone git@github.com:Semihalf/marvell-dpdk.git -b musdk-armada-17.10-mvneta
+
+  MUSDK is a light-weight library that provides direct access to Marvell's
+  NETA. Alternatively prebuilt MUSDK library can be
+  requested from `Marvell Extranet <https://extranet.marvell.com>`_. Once
+  approval has been granted, library can be found by typing ``musdk`` in
+  the search box.
+
+  MUSDK must be configured with the following features:
+
+  .. code-block:: console
+
+     --enable-bpool-dma=64 --enable-pp2=no --enable-neta
+
+- DPDK environment
+
+  Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup
+  DPDK environment.
+
+
+Config File Options
+-------------------
+
+The following options can be modified in the ``config`` file.
+
+- ``CONFIG_RTE_LIBRTE_MVNETA_PMD`` (default ``n``)
+
+    Toggle compilation of the librte_pmd_mvneta driver.
+
+
+Usage example
+^^^^^^^^^^^^^
+
+.. code-block:: console
+
+   ./testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 \
+    -c 3 -- -i --p 3 -a
+
+
+Building DPDK
+-------------
+
+Driver needs precompiled MUSDK library during compilation.
+
+.. code-block:: console
+
+   export CROSS_COMPILE=<toolchain>/bin/aarch64-linux-gnu-
+   ./bootstrap
+   ./configure --host=aarch64-linux-gnu --enable-bpool-dma=64
+   make install
+
+MUSDK will be installed to `usr/local` under current directory.
+For the detailed build instructions please consult ``doc/musdk_get_started.txt``.
+
+Before the DPDK build process the environmental variable ``LIBMUSDK_PATH`` with
+the path to the MUSDK installation directory needs to be exported.
+
+.. code-block:: console
+
+   export LIBMUSDK_PATH=<musdk>/usr/local
+   export CROSS=aarch64-linux-gnu-
+   make config T=arm64-armv8a-linuxapp-gcc
+   sed -ri 's,(MVNETA_PMD=)n,\1y,' build/.config
+   make
+
+Usage Example
+-------------
+
+MVNETA PMD requires extra out of tree kernel modules to function properly.
+`musdk_uio` and `mv_neta_uio` sources are part of the MUSDK. Please consult
+``doc/musdk_get_started.txt`` for the detailed build instructions.
+
+.. code-block:: console
+
+   insmod musdk_uio.ko
+   insmod mv_neta_uio.ko
+
+Additionally interfaces used by DPDK application need to be put up:
+
+.. code-block:: console
+
+   ip link set eth0 up
+   ip link set eth1 up
+
+In order to run testpmd example application following command can be used:
+
+.. code-block:: console
+
+   ./testpmd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- \
+     -i --p 3 -a --txd 256 --rxd 128 --rxq=1 --txq=1  --nb-cores=1
+
+
+In order to run l2fwd example application following command can be used:
+
+.. code-block:: console
+
+   ./l2fwd --vdev=net_mvneta,iface=eth0,iface=eth1 -c 3 -- -T 1 -p 3
diff --git a/doc/guides/rel_notes/release_18_11.rst b/doc/guides/rel_notes/release_18_11.rst
index 8c4bb54..5f51a8a 100644
--- a/doc/guides/rel_notes/release_18_11.rst
+++ b/doc/guides/rel_notes/release_18_11.rst
@@ -67,6 +67,10 @@ New Features
   SR-IOV option in Hyper-V and Azure. This is an alternative to the previous
   vdev_netvsc, tap, and failsafe drivers combination.
 
+* **Added a new net driver for Marvell Armada 3k device.**
+
+  Added the new ``mvneta`` net driver for Marvell Armada 3k device. See the
+  :doc:`../nics/mvneta` NIC guide for more details on this new driver.
 
 API Changes
 -----------
diff --git a/drivers/common/Makefile b/drivers/common/Makefile
index 5f72da0..b498c23 100644
--- a/drivers/common/Makefile
+++ b/drivers/common/Makefile
@@ -8,7 +8,9 @@ ifeq ($(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF)$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOO
 DIRS-y += octeontx
 endif
 
-ifeq ($(CONFIG_RTE_LIBRTE_MVPP2_PMD),y)
+MVEP-y := $(CONFIG_RTE_LIBRTE_MVPP2_PMD)
+MVEP-y += $(CONFIG_RTE_LIBRTE_MVNETA_PMD)
+ifneq (,$(findstring y,$(MVEP-y)))
 DIRS-y += mvep
 endif
 
diff --git a/drivers/common/mvep/rte_mvep_common.h b/drivers/common/mvep/rte_mvep_common.h
index ba47e16..0593cef 100644
--- a/drivers/common/mvep/rte_mvep_common.h
+++ b/drivers/common/mvep/rte_mvep_common.h
@@ -11,6 +11,7 @@ enum mvep_module_type {
 	MVEP_MOD_T_NONE = 0,
 	MVEP_MOD_T_PP2,
 	MVEP_MOD_T_SAM,
+	MVEP_MOD_T_NETA,
 	MVEP_MOD_T_LAST
 };
 
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 664398d..0d2c5b8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -33,6 +33,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_LIO_PMD) += liquidio
 DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4
 DIRS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += mlx5
 DIRS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD) += mvpp2
+DIRS-$(CONFIG_RTE_LIBRTE_MVNETA_PMD) += mvneta
 DIRS-$(CONFIG_RTE_LIBRTE_NETVSC_PMD) += netvsc
 DIRS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += nfp
 DIRS-$(CONFIG_RTE_LIBRTE_BNXT_PMD) += bnxt
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 9c28ed4..852a720 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -19,6 +19,7 @@ drivers = ['af_packet',
 	'kni',
 	'liquidio',
 	'mvpp2',
+	'mvneta',
 	'netvsc',
 	'nfp',
 	'null', 'octeontx', 'pcap', 'ring',
diff --git a/drivers/net/mvneta/Makefile b/drivers/net/mvneta/Makefile
new file mode 100644
index 0000000..149992e
--- /dev/null
+++ b/drivers/net/mvneta/Makefile
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Marvell International Ltd.
+# Copyright(c) 2018 Semihalf.
+# All rights reserved.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(MAKECMDGOALS),clean)
+ifneq ($(MAKECMDGOALS),config)
+ifeq ($(LIBMUSDK_PATH),)
+$(error "Please define LIBMUSDK_PATH environment variable")
+endif
+endif
+endif
+
+# library name
+LIB = librte_pmd_mvneta.a
+
+# library version
+LIBABIVER := 1
+
+# versioning export map
+EXPORT_MAP := rte_pmd_mvneta_version.map
+
+# external library dependencies
+CFLAGS += -I$(RTE_SDK)/drivers/common/mvep
+CFLAGS += -I$(LIBMUSDK_PATH)/include
+CFLAGS += -DMVCONF_TYPES_PUBLIC
+CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_PUBLIC
+CFLAGS += -DMVCONF_DMA_PHYS_ADDR_T_SIZE=64
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -O3
+LDLIBS += -L$(LIBMUSDK_PATH)/lib
+LDLIBS += -lmusdk
+LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool -lrte_ring
+LDLIBS += -lrte_ethdev -lrte_net -lrte_kvargs -lrte_cfgfile
+LDLIBS += -lrte_bus_vdev
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_MVNETA_PMD) += mvneta_ethdev.c
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/net/mvneta/meson.build b/drivers/net/mvneta/meson.build
new file mode 100644
index 0000000..2f31954
--- /dev/null
+++ b/drivers/net/mvneta/meson.build
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2018 Marvell International Ltd.
+# Copyright(c) 2018 Semihalf.
+# All rights reserved.
+
+path = get_option('lib_musdk_dir')
+lib_dir = path + '/lib'
+inc_dir = path + '/include'
+
+lib = cc.find_library('libmusdk', dirs : [lib_dir], required: false)
+if not lib.found()
+	build = false
+else
+	ext_deps += lib
+	includes += include_directories(inc_dir)
+	cflags += [
+	  '-DMVCONF_TYPES_PUBLIC',
+	  '-DMVCONF_DMA_PHYS_ADDR_T_PUBLIC',
+	  '-DMVCONF_DMA_PHYS_ADDR_T_SIZE=64'
+	]
+endif
+
+sources = files(
+	'mvneta_ethdev.c'
+)
+
+deps += ['cfgfile', 'common_mvep']
diff --git a/drivers/net/mvneta/mvneta_ethdev.c b/drivers/net/mvneta/mvneta_ethdev.c
new file mode 100644
index 0000000..2dd684b
--- /dev/null
+++ b/drivers/net/mvneta/mvneta_ethdev.c
@@ -0,0 +1,651 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Marvell International Ltd.
+ * Copyright(c) 2018 Semihalf.
+ * All rights reserved.
+ */
+
+#include <rte_ethdev_driver.h>
+#include <rte_kvargs.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+#include <rte_bus_vdev.h>
+
+#include <stdio.h>
+#include <fcntl.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <rte_mvep_common.h>
+
+#include "mvneta_ethdev.h"
+
+
+#define MVNETA_IFACE_NAME_ARG "iface"
+
+#define MVNETA_RX_OFFLOADS (DEV_RX_OFFLOAD_JUMBO_FRAME | \
+			  DEV_RX_OFFLOAD_CHECKSUM)
+
+/** Port Tx offloads capabilities */
+#define MVNETA_TX_OFFLOADS (DEV_TX_OFFLOAD_IPV4_CKSUM | \
+			  DEV_TX_OFFLOAD_UDP_CKSUM | \
+			  DEV_TX_OFFLOAD_TCP_CKSUM | \
+			  DEV_TX_OFFLOAD_MULTI_SEGS)
+
+#define MVNETA_PKT_SIZE_MAX (16382 - MV_MH_SIZE) /* 9700B */
+#define MVNETA_DEFAULT_MTU 1500
+
+#define MVNETA_MAC_ADDRS_MAX 256 /*16 UC, 256 IP, 256 MC/BC */
+/** Maximum length of a match string */
+#define MVNETA_MATCH_LEN 16
+
+int mvneta_logtype;
+
+static const char * const valid_args[] = {
+	MVNETA_IFACE_NAME_ARG,
+	NULL
+};
+
+struct mvneta_ifnames {
+	const char *names[NETA_NUM_ETH_PPIO];
+	int idx;
+};
+
+static int mvneta_dev_num;
+static int mvneta_lcore_first;
+static int mvneta_lcore_last;
+
+/**
+ * Deinitialize packet processor.
+ */
+static void
+mvneta_neta_deinit(void)
+{
+	neta_deinit();
+}
+
+/**
+ * Initialize packet processor.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_neta_init(void)
+{
+	return neta_init();
+}
+
+/**
+ * Callback used by rte_kvargs_process() during argument parsing.
+ *
+ * @param key
+ *   Pointer to the parsed key (unused).
+ * @param value
+ *   Pointer to the parsed value.
+ * @param extra_args
+ *   Pointer to the extra arguments which contains address of the
+ *   table of pointers to parsed interface names.
+ *
+ * @return
+ *   Always 0.
+ */
+static int
+mvneta_ifnames_get(const char *key __rte_unused, const char *value,
+		 void *extra_args)
+{
+	struct mvneta_ifnames *ifnames = extra_args;
+
+	ifnames->names[ifnames->idx++] = value;
+
+	return 0;
+}
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues and
+ * configure RSS if supported.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_configure(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	struct neta_ppio_params *ppio_params;
+
+	if (dev->data->dev_conf.rxmode.mq_mode != ETH_MQ_RX_NONE) {
+		MVNETA_LOG(INFO, "Unsupported RSS and rx multi queue mode %d",
+			dev->data->dev_conf.rxmode.mq_mode);
+		if (dev->data->nb_rx_queues > 1)
+			return -EINVAL;
+	}
+
+	if (dev->data->dev_conf.rxmode.split_hdr_size) {
+		MVNETA_LOG(INFO, "Split headers not supported");
+		return -EINVAL;
+	}
+
+	if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)
+		dev->data->mtu = dev->data->dev_conf.rxmode.max_rx_pkt_len -
+				 MRVL_NETA_ETH_HDRS_LEN;
+
+	if (dev->data->dev_conf.txmode.offloads & DEV_TX_OFFLOAD_MULTI_SEGS)
+		priv->multiseg = 1;
+
+	ppio_params = &priv->ppio_params;
+	ppio_params->outqs_params.num_outqs = dev->data->nb_tx_queues;
+	priv->nb_rx_queues = dev->data->nb_rx_queues;
+	/* Default: 1 TC, no QoS supported. */
+	ppio_params->inqs_params.num_tcs = 1;
+	ppio_params->inqs_params.tcs_params[0].pkt_offset = MRVL_NETA_PKT_OFFS;
+	priv->ppio_id = dev->data->port_id;
+
+	return 0;
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure (unused).
+ * @param info
+ *   Info structure output buffer.
+ */
+static void
+mvneta_dev_infos_get(struct rte_eth_dev *dev __rte_unused,
+		   struct rte_eth_dev_info *info)
+{
+	info->speed_capa = ETH_LINK_SPEED_10M |
+			   ETH_LINK_SPEED_100M |
+			   ETH_LINK_SPEED_1G |
+			   ETH_LINK_SPEED_2_5G;
+
+	info->max_rx_queues = MRVL_NETA_RXQ_MAX;
+	info->max_tx_queues = MRVL_NETA_TXQ_MAX;
+	info->max_mac_addrs = MVNETA_MAC_ADDRS_MAX;
+
+	info->rx_desc_lim.nb_max = MRVL_NETA_RXD_MAX;
+	info->rx_desc_lim.nb_min = MRVL_NETA_RXD_MIN;
+	info->rx_desc_lim.nb_align = MRVL_NETA_RXD_ALIGN;
+
+	info->tx_desc_lim.nb_max = MRVL_NETA_TXD_MAX;
+	info->tx_desc_lim.nb_min = MRVL_NETA_TXD_MIN;
+	info->tx_desc_lim.nb_align = MRVL_NETA_TXD_ALIGN;
+
+	info->rx_offload_capa = MVNETA_RX_OFFLOADS;
+	info->rx_queue_offload_capa = MVNETA_RX_OFFLOADS;
+
+	info->tx_offload_capa =  MVNETA_TX_OFFLOADS;
+	info->tx_queue_offload_capa =  MVNETA_TX_OFFLOADS;
+
+	/* By default packets are dropped if no descriptors are available */
+	info->default_rxconf.rx_drop_en = 1;
+	/* Deferred tx queue start is not supported */
+	info->default_txconf.tx_deferred_start = 0;
+	info->default_txconf.offloads = 0;
+
+	info->max_rx_pktlen = MVNETA_PKT_SIZE_MAX;
+}
+
+/**
+ * Return supported packet types.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure (unused).
+ *
+ * @return
+ *   Const pointer to the table with supported packet types.
+ */
+static const uint32_t *
+mvneta_dev_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
+{
+	static const uint32_t ptypes[] = {
+		RTE_PTYPE_L2_ETHER,
+		RTE_PTYPE_L2_ETHER_VLAN,
+		RTE_PTYPE_L3_IPV4,
+		RTE_PTYPE_L3_IPV6,
+		RTE_PTYPE_L4_TCP,
+		RTE_PTYPE_L4_UDP
+	};
+
+	return ptypes;
+}
+
+/**
+ * DPDK callback to bring the link up.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_set_link_up(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (!priv->ppio)
+		return 0;
+
+	return neta_ppio_enable(priv->ppio);
+}
+
+/**
+ * DPDK callback to bring the link down.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_dev_set_link_down(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (!priv->ppio)
+		return 0;
+
+	return neta_ppio_disable(priv->ppio);
+}
+
+/**
+ * DPDK callback to start the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+static int
+mvneta_dev_start(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	char match[MVNETA_MATCH_LEN];
+	int ret = 0, i;
+
+	if (priv->ppio)
+		return mvneta_dev_set_link_up(dev);
+
+	snprintf(match, sizeof(match), "%s", dev->data->name);
+	priv->ppio_params.match = match;
+	priv->ppio_params.inqs_params.mtu = dev->data->mtu;
+
+	ret = neta_ppio_init(&priv->ppio_params, &priv->ppio);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to init ppio");
+		return ret;
+	}
+	priv->ppio_id = priv->ppio->port_id;
+
+	/*
+	 * In case there are some some stale uc/mc mac addresses flush them
+	 * here. It cannot be done during mvneta_dev_close() as port information
+	 * is already gone at that point (due to neta_ppio_deinit() in
+	 * mvneta_dev_stop()).
+	 */
+	if (!priv->uc_mc_flushed) {
+		ret = neta_ppio_flush_mac_addrs(priv->ppio, 0, 1);
+		if (ret) {
+			MVNETA_LOG(ERR,
+				"Failed to flush uc/mc filter list");
+			goto out;
+		}
+		priv->uc_mc_flushed = 1;
+	}
+
+	ret = mvneta_dev_set_link_up(dev);
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to set link up");
+		goto out;
+	}
+
+	/* start tx queues */
+	for (i = 0; i < dev->data->nb_tx_queues; i++)
+		dev->data->tx_queue_state[i] = RTE_ETH_QUEUE_STATE_STARTED;
+
+	return 0;
+
+out:
+	MVNETA_LOG(ERR, "Failed to start device");
+	neta_ppio_deinit(priv->ppio);
+	return ret;
+}
+
+/**
+ * DPDK callback to stop the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_dev_stop(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (!priv->ppio)
+		return;
+
+	mvneta_dev_set_link_down(dev);
+
+	neta_ppio_deinit(priv->ppio);
+
+	priv->ppio = NULL;
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mvneta_dev_close(struct rte_eth_dev *dev)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+
+	if (priv->ppio)
+		mvneta_dev_stop(dev);
+}
+
+/**
+ * DPDK callback to set the primary MAC address.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param mac_addr
+ *   MAC address to register.
+ */
+static int
+mvneta_mac_addr_set(struct rte_eth_dev *dev, struct ether_addr *mac_addr)
+{
+	struct mvneta_priv *priv = dev->data->dev_private;
+	int ret;
+
+	if (!priv->ppio)
+		return -EINVAL;
+
+	ret = neta_ppio_set_mac_addr(priv->ppio, mac_addr->addr_bytes);
+	if (ret) {
+		char buf[ETHER_ADDR_FMT_SIZE];
+		ether_format_addr(buf, sizeof(buf), mac_addr);
+		MVNETA_LOG(ERR, "Failed to set mac to %s", buf);
+	}
+	return 0;
+}
+
+static const struct eth_dev_ops mvneta_ops = {
+	.dev_configure = mvneta_dev_configure,
+	.dev_start = mvneta_dev_start,
+	.dev_stop = mvneta_dev_stop,
+	.dev_set_link_up = mvneta_dev_set_link_up,
+	.dev_set_link_down = mvneta_dev_set_link_down,
+	.dev_close = mvneta_dev_close,
+	.mac_addr_set = mvneta_mac_addr_set,
+	.dev_infos_get = mvneta_dev_infos_get,
+	.dev_supported_ptypes_get = mvneta_dev_supported_ptypes_get,
+};
+
+/**
+ * Create private device structure.
+ *
+ * @param dev_name
+ *   Pointer to the port name passed in the initialization parameters.
+ *
+ * @return
+ *   Pointer to the newly allocated private device structure.
+ */
+static struct mvneta_priv *
+mvneta_priv_create(const char *dev_name)
+{
+	struct mvneta_priv *priv;
+
+	priv = rte_zmalloc_socket(dev_name, sizeof(*priv), 0, rte_socket_id());
+	if (!priv)
+		return NULL;
+
+	return priv;
+}
+
+/**
+ * Create device representing Ethernet port.
+ *
+ * @param name
+ *   Pointer to the port's name.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+mvneta_eth_dev_create(struct rte_vdev_device *vdev, const char *name)
+{
+	int ret, fd = socket(AF_INET, SOCK_DGRAM, 0);
+	struct rte_eth_dev *eth_dev;
+	struct mvneta_priv *priv;
+	struct ifreq req;
+
+	eth_dev = rte_eth_dev_allocate(name);
+	if (!eth_dev)
+		return -ENOMEM;
+
+	priv = mvneta_priv_create(name);
+
+	if (!priv) {
+		ret = -ENOMEM;
+		goto out_free_dev;
+	}
+
+	eth_dev->data->mac_addrs =
+		rte_zmalloc("mac_addrs",
+			    ETHER_ADDR_LEN * MVNETA_MAC_ADDRS_MAX, 0);
+	if (!eth_dev->data->mac_addrs) {
+		MVNETA_LOG(ERR, "Failed to allocate space for eth addrs");
+		ret = -ENOMEM;
+		goto out_free_priv;
+	}
+
+	memset(&req, 0, sizeof(req));
+	strcpy(req.ifr_name, name);
+	ret = ioctl(fd, SIOCGIFHWADDR, &req);
+	if (ret)
+		goto out_free_mac;
+
+	memcpy(eth_dev->data->mac_addrs[0].addr_bytes,
+	       req.ifr_addr.sa_data, ETHER_ADDR_LEN);
+
+	eth_dev->data->kdrv = RTE_KDRV_NONE;
+	eth_dev->data->dev_private = priv;
+	eth_dev->device = &vdev->device;
+	eth_dev->dev_ops = &mvneta_ops;
+
+	return 0;
+out_free_mac:
+	rte_free(eth_dev->data->mac_addrs);
+out_free_dev:
+	rte_eth_dev_release_port(eth_dev);
+out_free_priv:
+	rte_free(priv);
+
+	return ret;
+}
+
+/**
+ * Cleanup previously created device representing Ethernet port.
+ *
+ * @param eth_dev
+ *   Pointer to the corresponding rte_eth_dev structure.
+ */
+static void
+mvneta_eth_dev_destroy(struct rte_eth_dev *eth_dev)
+{
+	rte_free(eth_dev->data->dev_private);
+	rte_free(eth_dev->data->mac_addrs);
+	rte_eth_dev_release_port(eth_dev);
+}
+
+/**
+ * Cleanup previously created device representing Ethernet port.
+ *
+ * @param name
+ *   Pointer to the port name.
+ */
+static void
+mvneta_eth_dev_destroy_name(const char *name)
+{
+	struct rte_eth_dev *eth_dev;
+
+	eth_dev = rte_eth_dev_allocated(name);
+	if (!eth_dev)
+		return;
+
+	mvneta_eth_dev_destroy(eth_dev);
+}
+
+/**
+ * DPDK callback to register the virtual device.
+ *
+ * @param vdev
+ *   Pointer to the virtual device.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+rte_pmd_mvneta_probe(struct rte_vdev_device *vdev)
+{
+	struct rte_kvargs *kvlist;
+	struct mvneta_ifnames ifnames;
+	int ret = -EINVAL;
+	uint32_t i, ifnum;
+	const char *params;
+
+	params = rte_vdev_device_args(vdev);
+	if (!params)
+		return -EINVAL;
+
+	kvlist = rte_kvargs_parse(params, valid_args);
+	if (!kvlist)
+		return -EINVAL;
+
+	ifnum = rte_kvargs_count(kvlist, MVNETA_IFACE_NAME_ARG);
+	if (ifnum > RTE_DIM(ifnames.names))
+		goto out_free_kvlist;
+
+	ifnames.idx = 0;
+	rte_kvargs_process(kvlist, MVNETA_IFACE_NAME_ARG,
+			   mvneta_ifnames_get, &ifnames);
+
+	/*
+	 * The below system initialization should be done only once,
+	 * on the first provided configuration file
+	 */
+	if (mvneta_dev_num)
+		goto init_devices;
+
+	MVNETA_LOG(INFO, "Perform MUSDK initializations");
+
+	ret = rte_mvep_init(MVEP_MOD_T_NETA, kvlist);
+	if (ret)
+		goto out_free_kvlist;
+
+	ret = mvneta_neta_init();
+	if (ret) {
+		MVNETA_LOG(ERR, "Failed to init NETA!");
+		rte_mvep_deinit(MVEP_MOD_T_NETA);
+		goto out_free_kvlist;
+	}
+
+	mvneta_lcore_first = RTE_MAX_LCORE;
+	mvneta_lcore_last = 0;
+
+init_devices:
+	for (i = 0; i < ifnum; i++) {
+		MVNETA_LOG(INFO, "Creating %s", ifnames.names[i]);
+		ret = mvneta_eth_dev_create(vdev, ifnames.names[i]);
+		if (ret)
+			goto out_cleanup;
+	}
+	mvneta_dev_num += ifnum;
+
+	rte_kvargs_free(kvlist);
+
+	return 0;
+out_cleanup:
+	for (; i > 0; i--)
+		mvneta_eth_dev_destroy_name(ifnames.names[i]);
+
+	if (mvneta_dev_num == 0) {
+		mvneta_neta_deinit();
+		rte_mvep_deinit(MVEP_MOD_T_NETA);
+	}
+out_free_kvlist:
+	rte_kvargs_free(kvlist);
+
+	return ret;
+}
+
+/**
+ * DPDK callback to remove virtual device.
+ *
+ * @param vdev
+ *   Pointer to the removed virtual device.
+ *
+ * @return
+ *   0 on success, negative error value otherwise.
+ */
+static int
+rte_pmd_mvneta_remove(struct rte_vdev_device *vdev)
+{
+	int i;
+	const char *name;
+
+	name = rte_vdev_device_name(vdev);
+	if (!name)
+		return -EINVAL;
+
+	MVNETA_LOG(INFO, "Removing %s", name);
+
+	RTE_ETH_FOREACH_DEV(i) {
+		if (rte_eth_devices[i].device != &vdev->device)
+			continue;
+
+		mvneta_eth_dev_destroy(&rte_eth_devices[i]);
+		mvneta_dev_num--;
+	}
+
+	if (mvneta_dev_num == 0) {
+		MVNETA_LOG(INFO, "Perform MUSDK deinit");
+		mvneta_neta_deinit();
+		rte_mvep_deinit(MVEP_MOD_T_NETA);
+	}
+
+	return 0;
+}
+
+static struct rte_vdev_driver pmd_mvneta_drv = {
+	.probe = rte_pmd_mvneta_probe,
+	.remove = rte_pmd_mvneta_remove,
+};
+
+RTE_PMD_REGISTER_VDEV(net_mvneta, pmd_mvneta_drv);
+
+RTE_INIT(mvneta_init_log)
+{
+	mvneta_logtype = rte_log_register("pmd.net.mvneta");
+	if (mvneta_logtype >= 0)
+		rte_log_set_level(mvneta_logtype, RTE_LOG_NOTICE);
+}
diff --git a/drivers/net/mvneta/mvneta_ethdev.h b/drivers/net/mvneta/mvneta_ethdev.h
new file mode 100644
index 0000000..8b8d726
--- /dev/null
+++ b/drivers/net/mvneta/mvneta_ethdev.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Marvell International Ltd.
+ * Copyright(c) 2018 Semihalf.
+ * All rights reserved.
+ */
+
+#ifndef _MVNETA_ETHDEV_H_
+#define _MVNETA_ETHDEV_H_
+
+/*
+ * container_of is defined by both DPDK and MUSDK,
+ * we'll declare only one version.
+ *
+ * Note that it is not used in this PMD anyway.
+ */
+#ifdef container_of
+#undef container_of
+#endif
+
+#include <drivers/mv_neta.h>
+#include <drivers/mv_neta_ppio.h>
+
+/** Packet offset inside RX buffer. */
+#define MRVL_NETA_PKT_OFFS 64
+
+/** Maximum number of rx/tx queues per port */
+#define MRVL_NETA_RXQ_MAX 8
+#define MRVL_NETA_TXQ_MAX 8
+
+/** Minimum/maximum number of descriptors in tx queue */
+#define MRVL_NETA_TXD_MIN 16
+#define MRVL_NETA_TXD_MAX 2048
+
+/** Tx queue descriptors alignment in B */
+#define MRVL_NETA_TXD_ALIGN 32
+
+/** Minimum/maximum number of descriptors in rx queue */
+#define MRVL_NETA_RXD_MIN 16
+#define MRVL_NETA_RXD_MAX 2048
+
+/** Rx queue descriptors alignment in B */
+#define MRVL_NETA_RXD_ALIGN 32
+
+#define MRVL_NETA_VLAN_TAG_LEN		4
+#define MRVL_NETA_ETH_HDRS_LEN		(ETHER_HDR_LEN + ETHER_CRC_LEN + \
+					MRVL_NETA_VLAN_TAG_LEN)
+
+#define MRVL_NETA_HDRS_LEN		(MV_MH_SIZE + MRVL_NETA_ETH_HDRS_LEN)
+#define MRVL_NETA_MTU_TO_MRU(mtu)	((mtu) + MRVL_NETA_HDRS_LEN)
+#define MRVL_NETA_MRU_TO_MTU(mru)	((mru) - MRVL_NETA_HDRS_LEN)
+
+
+struct mvneta_priv {
+	/* Hot fields, used in fast path. */
+	struct neta_ppio	*ppio;    /**< Port handler pointer */
+
+	uint8_t pp_id;
+	uint8_t ppio_id;	/* ppio port id */
+	uint8_t uc_mc_flushed;
+	uint8_t multiseg;
+
+	struct neta_ppio_params ppio_params;
+	uint16_t nb_rx_queues;
+
+	uint64_t rate_max;
+};
+
+/** Current log type. */
+extern int mvneta_logtype;
+
+#define MVNETA_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, mvneta_logtype, "%s(): " fmt "\n", \
+		__func__, ##args)
+
+#endif /* _MVNETA_ETHDEV_H_ */
diff --git a/drivers/net/mvneta/rte_pmd_mvneta_version.map b/drivers/net/mvneta/rte_pmd_mvneta_version.map
new file mode 100644
index 0000000..24bd5cd
--- /dev/null
+++ b/drivers/net/mvneta/rte_pmd_mvneta_version.map
@@ -0,0 +1,3 @@
+DPDK_18.11 {
+	local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 899d51a..66f9199 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -98,7 +98,9 @@ ifeq ($(CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF)$(CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOO
 _LDLIBS-y += -lrte_common_octeontx
 endif
 
-ifeq ($(CONFIG_RTE_LIBRTE_MVPP2_PMD),y)
+MVEP-y := $(CONFIG_RTE_LIBRTE_MVPP2_PMD)
+MVEP-y += $(CONFIG_RTE_LIBRTE_MVNETA_PMD)
+ifneq (,$(findstring y,$(MVEP-y)))
 _LDLIBS-y += -lrte_common_mvep -L$(LIBMUSDK_PATH)/lib -lmusdk
 endif
 
@@ -157,7 +159,8 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -lrte_pmd_mlx5 -ldl -lmnl
 else
 _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD)       += -lrte_pmd_mlx5 -libverbs -lmlx5 -lmnl
 endif
-_LDLIBS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD)      += -lrte_pmd_mvpp2 -L$(LIBMUSDK_PATH)/lib -lmusdk
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MVPP2_PMD)      += -lrte_pmd_mvpp2
+_LDLIBS-$(CONFIG_RTE_LIBRTE_MVNETA_PMD)     += -lrte_pmd_mvneta
 _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD)        += -lrte_pmd_nfp
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL)       += -lrte_pmd_null
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_PCAP)       += -lrte_pmd_pcap -lpcap
