@@ -677,71 +677,6 @@ int rte_pci_write_config(const struct rte_pci_device *device,
}
}
-#if defined(RTE_ARCH_X86)
-static int
-pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
- struct rte_pci_ioport *p)
-{
- uint16_t start, end;
- FILE *fp;
- char *line = NULL;
- char pci_id[16];
- int found = 0;
- size_t linesz;
-
- if (rte_eal_iopl_init() != 0) {
- RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
- __func__, dev->name);
- return -1;
- }
-
- snprintf(pci_id, sizeof(pci_id), PCI_PRI_FMT,
- dev->addr.domain, dev->addr.bus,
- dev->addr.devid, dev->addr.function);
-
- fp = fopen("/proc/ioports", "r");
- if (fp == NULL) {
- RTE_LOG(ERR, EAL, "%s(): can't open ioports\n", __func__);
- return -1;
- }
-
- while (getdelim(&line, &linesz, '\n', fp) > 0) {
- char *ptr = line;
- char *left;
- int n;
-
- n = strcspn(ptr, ":");
- ptr[n] = 0;
- left = &ptr[n + 1];
-
- while (*left && isspace(*left))
- left++;
-
- if (!strncmp(left, pci_id, strlen(pci_id))) {
- found = 1;
-
- while (*ptr && isspace(*ptr))
- ptr++;
-
- sscanf(ptr, "%04hx-%04hx", &start, &end);
-
- break;
- }
- }
-
- free(line);
- fclose(fp);
-
- if (!found)
- return -1;
-
- p->base = start;
- RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
-
- return 0;
-}
-#endif
-
int
rte_pci_ioport_map(struct rte_pci_device *dev, int bar,
struct rte_pci_ioport *p)
@@ -756,14 +691,8 @@ int rte_pci_write_config(const struct rte_pci_device *device,
break;
#endif
case RTE_PCI_KDRV_IGB_UIO:
- ret = pci_uio_ioport_map(dev, bar, p);
- break;
case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
- ret = pci_ioport_map(dev, bar, p);
-#else
ret = pci_uio_ioport_map(dev, bar, p);
-#endif
break;
default:
break;
@@ -830,14 +759,8 @@ int rte_pci_write_config(const struct rte_pci_device *device,
break;
#endif
case RTE_PCI_KDRV_IGB_UIO:
- ret = pci_uio_ioport_unmap(p);
- break;
case RTE_PCI_KDRV_UIO_GENERIC:
-#if defined(RTE_ARCH_X86)
- ret = 0;
-#else
ret = pci_uio_ioport_unmap(p);
-#endif
break;
default:
break;
@@ -373,10 +373,13 @@
pci_uio_ioport_map(struct rte_pci_device *dev, int bar,
struct rte_pci_ioport *p)
{
+ FILE *f = NULL;
char dirname[PATH_MAX];
char filename[PATH_MAX];
- int uio_num;
- unsigned long start;
+ char buf[BUFSIZ];
+ uint64_t phys_addr, end_addr, flags;
+ unsigned long base;
+ int i;
if (rte_eal_iopl_init() != 0) {
RTE_LOG(ERR, EAL, "%s(): insufficient ioport permissions for PCI device %s\n",
@@ -384,41 +387,66 @@
return -1;
}
- uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
- if (uio_num < 0)
+ /* open and read addresses of the corresponding resource in sysfs */
+ snprintf(filename, sizeof(filename), "%s/" PCI_PRI_FMT "/resource",
+ rte_pci_get_sysfs_path(), dev->addr.domain, dev->addr.bus,
+ dev->addr.devid, dev->addr.function);
+ f = fopen(filename, "r");
+ if (f == NULL) {
+ RTE_LOG(ERR, EAL, "%s(): Cannot open sysfs resource: %s\n",
+ __func__, strerror(errno));
return -1;
+ }
- /* get portio start */
- snprintf(filename, sizeof(filename),
- "%s/portio/port%d/start", dirname, bar);
- if (eal_parse_sysfs_value(filename, &start) < 0) {
- RTE_LOG(ERR, EAL, "%s(): cannot parse portio start\n",
- __func__);
- return -1;
+ for (i = 0; i < bar + 1; i++) {
+ if (fgets(buf, sizeof(buf), f) == NULL) {
+ RTE_LOG(ERR, EAL, "%s(): Cannot read sysfs resource\n", __func__);
+ goto error;
+ }
}
- /* ensure we don't get anything funny here, read/write will cast to
- * uin16_t */
- if (start > UINT16_MAX)
- return -1;
+ if (pci_parse_one_sysfs_resource(buf, sizeof(buf), &phys_addr,
+ &end_addr, &flags) < 0)
+ goto error;
+
+ if (!(flags & IORESOURCE_IO)) {
+ RTE_LOG(ERR, EAL, "%s(): bar resource other than IO is not supported\n", __func__);
+ goto error;
+ }
+ base = (unsigned long)phys_addr;
+ RTE_LOG(INFO, EAL, "%s(): PIO BAR %08lx detected\n", __func__, base);
+
+ if (base > UINT16_MAX)
+ goto error;
/* FIXME only for primary process ? */
if (dev->intr_handle.type == RTE_INTR_HANDLE_UNKNOWN) {
+ int uio_num = pci_get_uio_dev(dev, dirname, sizeof(dirname), 0);
+ if (uio_num < 0) {
+ RTE_LOG(ERR, EAL, "cannot open %s: %s\n",
+ dirname, strerror(errno));
+ goto error;
+ }
snprintf(filename, sizeof(filename), "/dev/uio%u", uio_num);
dev->intr_handle.fd = open(filename, O_RDWR);
if (dev->intr_handle.fd < 0) {
RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
filename, strerror(errno));
- return -1;
+ goto error;
}
dev->intr_handle.type = RTE_INTR_HANDLE_UIO;
}
- RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", start);
+ RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%lx\n", base);
- p->base = start;
+ p->base = base;
p->len = 0;
+ fclose(f);
return 0;
+error:
+ if (f)
+ fclose(f);
+ return -1;
}
#else
int