diff mbox series

[v5,4/8] examples/ioat: add cmd line option to control stats print interval

Message ID 20211026131432.2734145-5-kevin.laatz@intel.com (mailing list archive)
State Accepted, archived
Delegated to: Thomas Monjalon
Headers show
Series port ioatfwd app to dmadev | expand

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Kevin Laatz Oct. 26, 2021, 1:14 p.m. UTC
Add a command line option to control the interval between stats prints.

Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
---
 doc/guides/sample_app_ug/ioat.rst |  4 +++-
 examples/ioat/ioatfwd.c           | 31 +++++++++++++++++++++++--------
 2 files changed, 26 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/doc/guides/sample_app_ug/ioat.rst b/doc/guides/sample_app_ug/ioat.rst
index 127129dd4b..1edad3f9ac 100644
--- a/doc/guides/sample_app_ug/ioat.rst
+++ b/doc/guides/sample_app_ug/ioat.rst
@@ -46,7 +46,7 @@  The application requires a number of command line options:
 .. code-block:: console
 
     ./<build_dir>/examples/dpdk-ioat [EAL options] -- [-p MASK] [-q NQ] [-s RS] [-c <sw|hw>]
-        [--[no-]mac-updating] [-b BS] [-f FS]
+        [--[no-]mac-updating] [-b BS] [-f FS] [-i SI]
 
 where,
 
@@ -68,6 +68,8 @@  where,
 
 *   f FS: set the max frame size
 
+*   i SI: set the interval, in second, between statistics prints (default is 1)
+
 The application can be launched in various configurations depending on
 provided parameters. The app can use up to 2 lcores: one of them receives
 incoming traffic and makes a copy of each packet. The second lcore then
diff --git a/examples/ioat/ioatfwd.c b/examples/ioat/ioatfwd.c
index 2d02444fc7..995ba7b8db 100644
--- a/examples/ioat/ioatfwd.c
+++ b/examples/ioat/ioatfwd.c
@@ -26,6 +26,7 @@ 
 #define CMD_LINE_OPT_RING_SIZE "ring-size"
 #define CMD_LINE_OPT_BATCH_SIZE "dma-batch-size"
 #define CMD_LINE_OPT_FRAME_SIZE "max-frame-size"
+#define CMD_LINE_OPT_STATS_INTERVAL "stats-interval"
 
 /* configurable number of RX/TX ring descriptors */
 #define RX_DEFAULT_RINGSIZE 1024
@@ -95,6 +96,9 @@  static copy_mode_t copy_mode = COPY_MODE_IOAT_NUM;
  */
 static unsigned short ring_size = 2048;
 
+/* interval, in seconds, between stats prints */
+static unsigned short stats_interval = 1;
+
 /* global transmission config */
 struct rxtx_transmission_config cfg;
 
@@ -152,15 +156,15 @@  print_total_stats(struct total_statistics *ts)
 		"\nTotal packets Tx: %24"PRIu64" [pps]"
 		"\nTotal packets Rx: %24"PRIu64" [pps]"
 		"\nTotal packets dropped: %19"PRIu64" [pps]",
-		ts->total_packets_tx,
-		ts->total_packets_rx,
-		ts->total_packets_dropped);
+		ts->total_packets_tx / stats_interval,
+		ts->total_packets_rx / stats_interval,
+		ts->total_packets_dropped / stats_interval);
 
 	if (copy_mode == COPY_MODE_IOAT_NUM) {
 		printf("\nTotal IOAT successful enqueues: %8"PRIu64" [enq/s]"
 			"\nTotal IOAT failed enqueues: %12"PRIu64" [enq/s]",
-			ts->total_successful_enqueues,
-			ts->total_failed_enqueues);
+			ts->total_successful_enqueues / stats_interval,
+			ts->total_failed_enqueues / stats_interval);
 	}
 
 	printf("\n====================================================\n");
@@ -248,10 +252,10 @@  print_stats(char *prgname)
 	memset(&ts, 0, sizeof(struct total_statistics));
 
 	while (!force_quit) {
-		/* Sleep for 1 second each round - init sleep allows reading
+		/* Sleep for "stats_interval" seconds each round - init sleep allows reading
 		 * messages from app startup.
 		 */
-		sleep(1);
+		sleep(stats_interval);
 
 		/* Clear screen and move to top left */
 		printf("%s%s", clr, topLeft);
@@ -614,7 +618,8 @@  ioat_usage(const char *prgname)
 		"       - The source MAC address is replaced by the TX port MAC address\n"
 		"       - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n"
 		"  -c --copy-type CT: type of copy: sw|hw\n"
-		"  -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n",
+		"  -s --ring-size RS: size of IOAT rawdev ring for hardware copy mode or rte_ring for software copy mode\n"
+		"  -i --stats-interval SI: interval, in seconds, between stats prints (default is 1)\n",
 			prgname);
 }
 
@@ -654,6 +659,7 @@  ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
 		"p:"  /* portmask */
 		"q:"  /* number of RX queues per port */
 		"s:"  /* ring size */
+		"i:"  /* interval, in seconds, between stats prints */
 		;
 
 	static const struct option lgopts[] = {
@@ -665,6 +671,7 @@  ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
 		{CMD_LINE_OPT_RING_SIZE, required_argument, NULL, 's'},
 		{CMD_LINE_OPT_BATCH_SIZE, required_argument, NULL, 'b'},
 		{CMD_LINE_OPT_FRAME_SIZE, required_argument, NULL, 'f'},
+		{CMD_LINE_OPT_STATS_INTERVAL, required_argument, NULL, 'i'},
 		{NULL, 0, 0, 0}
 	};
 
@@ -738,6 +745,14 @@  ioat_parse_args(int argc, char **argv, unsigned int nb_ports)
 			}
 			break;
 
+		case 'i':
+			stats_interval = atoi(optarg);
+			if (stats_interval == 0) {
+				printf("Invalid stats interval, setting to 1\n");
+				stats_interval = 1;	/* set to default */
+			}
+			break;
+
 		/* long options */
 		case 0:
 			break;