[v6,1/6] ethdev: add capability to keep flow rules on restart
Checks
Commit Message
Previously, it was not specified what happens to the flow rules
when the device is stopped, possibly reconfigured, then started.
If flow rules were kept, it could be convenient for application
developers, because they wouldn't need to save and restore them.
However, due to the number of flows and possible creation rate it is
impractical to save all flow rules in DPDK layer. This means that flow
rules persistence really depends on whether PMD and HW can implement it
efficiently. It can also be limited by the rule item and action types,
and its attributes transfer bit (a combination of an item/action type
and a value of the transfer bit is called a ruel feature).
Add a device capability bit for PMDs that can keep at least some
of the flow rules across restart. Without this capability behavior
is still unspecified and it is declared that the application must
flush the rules before stopping the device.
Allow the application to test for persistence of rules using
a particular feature by attempting to create a flow rule
using that feature when the device is stopped
and checking for the specific error.
This is logical because if the PMD can to create the flow rule
when the device is not started and use it after the start happens,
it is natural that it can move its internal flow rule object
to the same state when the device is stopped and restore the state
when the device is started.
Rule persistence across a reconfigurations is not required,
because tracking all the rules and configuration-dependent resources
they use may be infeasible. In case a PMD cannot keep the rules
across reconfiguration, it is allowed just to report an error.
Application must then flush the rules before attempting it.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
---
doc/guides/prog_guide/rte_flow.rst | 36 ++++++++++++++++++++++++++++++
lib/ethdev/rte_ethdev.h | 7 ++++++
lib/ethdev/rte_flow.h | 1 +
3 files changed, 44 insertions(+)
@@ -87,6 +87,42 @@ To avoid resource leaks on the PMD side, handles must be explicitly
destroyed by the application before releasing associated resources such as
queues and ports.
+.. warning::
+
+ The following description of rule persistence is an experimental behavior
+ that may change without a prior notice.
+
+When the device is stopped, its rules do not process the traffic.
+In particular, transfer rules created using some device
+stop affecting the traffic even if they refer to different ports.
+
+If ``RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP`` is not advertised,
+rules cannot be created until the device is started for the first time
+and cannot be kept when the device is stopped.
+However, PMD also does not flush them automatically on stop,
+so the application must call ``rte_flow_flush()`` or ``rte_flow_destroy()``
+before stopping the device to ensure no rules remain.
+
+If ``RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP`` is advertised, this means
+the PMD can keep at least some rules across the device stop and start.
+However, ``rte_eth_dev_configure()`` may fail if any rules remain,
+so the application must flush them before attempting a reconfiguration.
+Keeping may be unsupported for some types of rule items and actions,
+as well as depending on the value of flow attributes transfer bit.
+A combination of a single an item or action type
+and a value of the transfer bit is called a rule feature.
+For example: a COUNT action with the transfer bit set.
+To test if rules with a particular feature are kept, the application must try
+to create a valid rule using this feature when the device is not started
+(either before the first start or after a stop).
+If it fails with an error of type ``RTE_FLOW_ERROR_TYPE_STATE``,
+all rules using this feature must be flushed by the application
+before stopping the device.
+If it succeeds, such rules will be kept when the device is stopped,
+provided they do not use other features that are not supported.
+Rules that are created when the device is stopped, including the rules
+created for the test, will be kept after the device is started.
+
The following sections cover:
- **Attributes** (represented by ``struct rte_flow_attr``): properties of a
@@ -90,6 +90,11 @@
* - flow director filtering mode (but not filtering rules)
* - NIC queue statistics mappings
*
+ * The following configuration may be retained or not
+ * depending on the device capabilities:
+ *
+ * - flow rules
+ *
* Any other configuration will not be stored and will need to be re-entered
* before a call to rte_eth_dev_start().
*
@@ -1691,6 +1696,8 @@ struct rte_eth_conf {
* mbuf->port field.
*/
#define RTE_ETH_DEV_CAPA_RXQ_SHARE RTE_BIT64(2)
+/** Device supports keeping flow rules across restart. */
+#define RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP RTE_BIT64(3)
/**@}*/
/*
@@ -3748,6 +3748,7 @@ enum rte_flow_error_type {
RTE_FLOW_ERROR_TYPE_ACTION_NUM, /**< Number of actions. */
RTE_FLOW_ERROR_TYPE_ACTION_CONF, /**< Action configuration. */
RTE_FLOW_ERROR_TYPE_ACTION, /**< Specific action. */
+ RTE_FLOW_ERROR_TYPE_STATE, /**< Current device state. */
};
/**