diff mbox series

[v5,10/11] raw/cnxk_gpio: support selftest

Message ID 20220118132424.2573372-11-tduszynski@marvell.com (mailing list archive)
State Superseded, archived
Delegated to: Thomas Monjalon
Headers show
Series Add cnxk_gpio | expand

Checks

Context Check Description
ci/checkpatch warning coding style issues

Commit Message

Tomasz Duszynski Jan. 18, 2022, 1:24 p.m. UTC
Add support for performing selftest.

Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
---
 doc/guides/rawdevs/cnxk_gpio.rst           |  11 +
 drivers/raw/cnxk_gpio/cnxk_gpio.c          |   1 +
 drivers/raw/cnxk_gpio/cnxk_gpio.h          |   2 +
 drivers/raw/cnxk_gpio/cnxk_gpio_selftest.c | 386 +++++++++++++++++++++
 drivers/raw/cnxk_gpio/meson.build          |   1 +
 5 files changed, 401 insertions(+)
 create mode 100644 drivers/raw/cnxk_gpio/cnxk_gpio_selftest.c
diff mbox series

Patch

diff --git a/doc/guides/rawdevs/cnxk_gpio.rst b/doc/guides/rawdevs/cnxk_gpio.rst
index ad93ec0d44..c03a5b937c 100644
--- a/doc/guides/rawdevs/cnxk_gpio.rst
+++ b/doc/guides/rawdevs/cnxk_gpio.rst
@@ -182,3 +182,14 @@  Message is used to remove installed interrupt handler.
 Message must have type set to ``CNXK_GPIO_MSG_TYPE_UNREGISTER_IRQ``.
 
 Consider using ``rte_pmd_gpio_unregister_gpio()`` wrapper.
+
+Self test
+---------
+
+On EAL initialization CNXK GPIO device will be probed and populated into
+the list of raw devices on condition ``--vdev=cnxk_gpio,gpiochip=<number>`` was
+passed. ``rte_rawdev_get_dev_id("CNXK_GPIO")`` returns unique device id. Use
+this identifier for further rawdev function calls.
+
+Selftest rawdev API can be used to verify the PMD functionality. Note it blindly
+assumes that all GPIOs are controllable so some errors during test are expected.
diff --git a/drivers/raw/cnxk_gpio/cnxk_gpio.c b/drivers/raw/cnxk_gpio/cnxk_gpio.c
index 58553ad3d9..230016b078 100644
--- a/drivers/raw/cnxk_gpio/cnxk_gpio.c
+++ b/drivers/raw/cnxk_gpio/cnxk_gpio.c
@@ -527,6 +527,7 @@  static const struct rte_rawdev_ops cnxk_gpio_rawdev_ops = {
 	.queue_count = cnxk_gpio_queue_count,
 	.queue_setup = cnxk_gpio_queue_setup,
 	.queue_release = cnxk_gpio_queue_release,
+	.dev_selftest = cnxk_gpio_selftest,
 };
 
 static int
diff --git a/drivers/raw/cnxk_gpio/cnxk_gpio.h b/drivers/raw/cnxk_gpio/cnxk_gpio.h
index c052ca5735..1b31b5a486 100644
--- a/drivers/raw/cnxk_gpio/cnxk_gpio.h
+++ b/drivers/raw/cnxk_gpio/cnxk_gpio.h
@@ -23,6 +23,8 @@  struct cnxk_gpiochip {
 	struct cnxk_gpio **gpios;
 };
 
+int cnxk_gpio_selftest(uint16_t dev_id);
+
 int cnxk_gpio_irq_init(struct cnxk_gpiochip *gpiochip);
 void cnxk_gpio_irq_fini(void);
 int cnxk_gpio_irq_request(int gpio, int cpu);
diff --git a/drivers/raw/cnxk_gpio/cnxk_gpio_selftest.c b/drivers/raw/cnxk_gpio/cnxk_gpio_selftest.c
new file mode 100644
index 0000000000..6502902f86
--- /dev/null
+++ b/drivers/raw/cnxk_gpio/cnxk_gpio_selftest.c
@@ -0,0 +1,386 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2021 Marvell.
+ */
+
+#include <fcntl.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include <rte_cycles.h>
+#include <rte_rawdev.h>
+#include <rte_rawdev_pmd.h>
+#include <rte_service.h>
+
+#include "cnxk_gpio.h"
+#include "rte_pmd_cnxk_gpio.h"
+
+#define CNXK_GPIO_BUFSZ 128
+
+#define OTX_IOC_MAGIC 0xF2
+#define OTX_IOC_TRIGGER_GPIO_HANDLER                                           \
+	_IO(OTX_IOC_MAGIC, 3)
+
+static int fd;
+
+static int
+cnxk_gpio_attr_exists(const char *attr)
+{
+	struct stat st;
+
+	return !stat(attr, &st);
+}
+
+static int
+cnxk_gpio_read_attr(char *attr, char *val)
+{
+	FILE *fp;
+	int ret;
+
+	fp = fopen(attr, "r");
+	if (!fp)
+		return -errno;
+
+	ret = fscanf(fp, "%s", val);
+	if (ret < 0)
+		return -errno;
+	if (ret != 1)
+		return -EIO;
+
+	ret = fclose(fp);
+	if (ret)
+		return -errno;
+
+	return 0;
+}
+
+#define CNXK_GPIO_ERR_STR(err, str, ...) do {                                  \
+	if (err) {                                                             \
+		RTE_LOG(ERR, PMD, "%s:%d: " str " (%d)\n", __func__, __LINE__, \
+			##__VA_ARGS__, err);                                   \
+		goto out;                                                      \
+	}                                                                      \
+} while (0)
+
+static int
+cnxk_gpio_validate_attr(char *attr, const char *expected)
+{
+	char buf[CNXK_GPIO_BUFSZ];
+	int ret;
+
+	ret = cnxk_gpio_read_attr(attr, buf);
+	if (ret)
+		return ret;
+
+	if (strncmp(buf, expected, sizeof(buf)))
+		return -EIO;
+
+	return 0;
+}
+
+#define CNXK_GPIO_PATH_FMT "/sys/class/gpio/gpio%d"
+
+static int
+cnxk_gpio_test_input(uint16_t dev_id, int base, int gpio)
+{
+	char buf[CNXK_GPIO_BUFSZ];
+	int ret, n;
+
+	n = snprintf(buf, sizeof(buf), CNXK_GPIO_PATH_FMT, base + gpio);
+	snprintf(buf + n, sizeof(buf) - n, "/direction");
+
+	ret = rte_pmd_gpio_set_pin_dir(dev_id, gpio, CNXK_GPIO_PIN_DIR_IN);
+	CNXK_GPIO_ERR_STR(ret, "failed to set dir to input");
+	ret = cnxk_gpio_validate_attr(buf, "in");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_value(dev_id, gpio, 1) |
+	      rte_pmd_gpio_set_pin_value(dev_id, gpio, 0);
+	if (!ret) {
+		ret = -EIO;
+		CNXK_GPIO_ERR_STR(ret, "input pin overwritten");
+	}
+
+	snprintf(buf + n, sizeof(buf) - n, "/edge");
+
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio,
+					CNXK_GPIO_PIN_EDGE_FALLING);
+	CNXK_GPIO_ERR_STR(ret, "failed to set edge to falling");
+	ret = cnxk_gpio_validate_attr(buf, "falling");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio,
+					CNXK_GPIO_PIN_EDGE_RISING);
+	CNXK_GPIO_ERR_STR(ret, "failed to change edge to rising");
+	ret = cnxk_gpio_validate_attr(buf, "rising");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio, CNXK_GPIO_PIN_EDGE_BOTH);
+	CNXK_GPIO_ERR_STR(ret, "failed to change edge to both");
+	ret = cnxk_gpio_validate_attr(buf, "both");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio, CNXK_GPIO_PIN_EDGE_NONE);
+	CNXK_GPIO_ERR_STR(ret, "failed to set edge to none");
+	ret = cnxk_gpio_validate_attr(buf, "none");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	/*
+	 * calling this makes sure kernel driver switches off inverted
+	 * logic
+	 */
+	rte_pmd_gpio_set_pin_dir(dev_id, gpio, CNXK_GPIO_PIN_DIR_IN);
+
+out:
+	return ret;
+}
+
+static int
+cnxk_gpio_trigger_irq(int gpio)
+{
+	int ret;
+
+	ret = ioctl(fd, OTX_IOC_TRIGGER_GPIO_HANDLER, gpio);
+
+	return ret == -1 ? -errno : 0;
+}
+
+static void
+cnxk_gpio_irq_handler(int gpio, void *data)
+{
+	*(int *)data = gpio;
+}
+
+static int
+cnxk_gpio_test_irq(uint16_t dev_id, int gpio)
+{
+	int irq_data, ret;
+
+	ret = rte_pmd_gpio_set_pin_dir(dev_id, gpio, CNXK_GPIO_PIN_DIR_IN);
+	CNXK_GPIO_ERR_STR(ret, "failed to set dir to input");
+
+	irq_data = 0;
+	ret = rte_pmd_gpio_register_irq(dev_id, gpio, rte_lcore_id(),
+					cnxk_gpio_irq_handler, &irq_data);
+	CNXK_GPIO_ERR_STR(ret, "failed to register irq handler");
+
+	ret = rte_pmd_gpio_enable_interrupt(dev_id, gpio,
+					    CNXK_GPIO_PIN_EDGE_RISING);
+	CNXK_GPIO_ERR_STR(ret, "failed to enable interrupt");
+
+	ret = cnxk_gpio_trigger_irq(gpio);
+	CNXK_GPIO_ERR_STR(ret, "failed to trigger irq");
+	rte_delay_ms(1);
+	ret = *(volatile int *)&irq_data == gpio ? 0 : -EIO;
+	CNXK_GPIO_ERR_STR(ret, "failed to test irq");
+
+	ret = rte_pmd_gpio_disable_interrupt(dev_id, gpio);
+	CNXK_GPIO_ERR_STR(ret, "failed to disable interrupt");
+
+	ret = rte_pmd_gpio_unregister_irq(dev_id, gpio);
+	CNXK_GPIO_ERR_STR(ret, "failed to unregister irq handler");
+out:
+	rte_pmd_gpio_disable_interrupt(dev_id, gpio);
+	rte_pmd_gpio_unregister_irq(dev_id, gpio);
+
+	return ret;
+}
+
+static int
+cnxk_gpio_test_output(uint16_t dev_id, int base, int gpio)
+{
+	char buf[CNXK_GPIO_BUFSZ];
+	int ret, val, n;
+
+	n = snprintf(buf, sizeof(buf), CNXK_GPIO_PATH_FMT, base + gpio);
+
+	snprintf(buf + n, sizeof(buf) - n, "/direction");
+	ret = rte_pmd_gpio_set_pin_dir(dev_id, gpio, CNXK_GPIO_PIN_DIR_OUT);
+	CNXK_GPIO_ERR_STR(ret, "failed to set dir to out");
+	ret = cnxk_gpio_validate_attr(buf, "out");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	snprintf(buf + n, sizeof(buf) - n, "/value");
+	ret = rte_pmd_gpio_set_pin_value(dev_id, gpio, 0);
+	CNXK_GPIO_ERR_STR(ret, "failed to set value to 0");
+	ret = cnxk_gpio_validate_attr(buf, "0");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+	ret = rte_pmd_gpio_get_pin_value(dev_id, gpio, &val);
+	CNXK_GPIO_ERR_STR(ret, "failed to read value");
+	if (val)
+		ret = -EIO;
+	CNXK_GPIO_ERR_STR(ret, "read %d instead of 0", val);
+
+	ret = rte_pmd_gpio_set_pin_value(dev_id, gpio, 1);
+	CNXK_GPIO_ERR_STR(ret, "failed to set value to 1");
+	ret = cnxk_gpio_validate_attr(buf, "1");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+	ret = rte_pmd_gpio_get_pin_value(dev_id, gpio, &val);
+	CNXK_GPIO_ERR_STR(ret, "failed to read value");
+	if (val != 1)
+		ret = -EIO;
+	CNXK_GPIO_ERR_STR(ret, "read %d instead of 1", val);
+
+	snprintf(buf + n, sizeof(buf) - n, "/direction");
+	ret = rte_pmd_gpio_set_pin_dir(dev_id, gpio, CNXK_GPIO_PIN_DIR_LOW);
+	CNXK_GPIO_ERR_STR(ret, "failed to set dir to low");
+	ret = cnxk_gpio_validate_attr(buf, "out");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+	snprintf(buf + n, sizeof(buf) - n, "/value");
+	ret = cnxk_gpio_validate_attr(buf, "0");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	snprintf(buf + n, sizeof(buf) - n, "/direction");
+	ret = rte_pmd_gpio_set_pin_dir(dev_id, gpio, CNXK_GPIO_PIN_DIR_HIGH);
+	CNXK_GPIO_ERR_STR(ret, "failed to set dir to high");
+	ret = cnxk_gpio_validate_attr(buf, "out");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+	snprintf(buf + n, sizeof(buf) - n, "/value");
+	ret = cnxk_gpio_validate_attr(buf, "1");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	snprintf(buf + n, sizeof(buf) - n, "/edge");
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio,
+					CNXK_GPIO_PIN_EDGE_FALLING);
+	ret = ret == 0 ? -EIO : 0;
+	CNXK_GPIO_ERR_STR(ret, "changed edge to falling");
+	ret = cnxk_gpio_validate_attr(buf, "none");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio,
+					CNXK_GPIO_PIN_EDGE_RISING);
+	ret = ret == 0 ? -EIO : 0;
+	CNXK_GPIO_ERR_STR(ret, "changed edge to rising");
+	ret = cnxk_gpio_validate_attr(buf, "none");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio, CNXK_GPIO_PIN_EDGE_BOTH);
+	ret = ret == 0 ? -EIO : 0;
+	CNXK_GPIO_ERR_STR(ret, "changed edge to both");
+	ret = cnxk_gpio_validate_attr(buf, "none");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	/* this one should succeed */
+	ret = rte_pmd_gpio_set_pin_edge(dev_id, gpio, CNXK_GPIO_PIN_EDGE_NONE);
+	CNXK_GPIO_ERR_STR(ret, "failed to change edge to none");
+	ret = cnxk_gpio_validate_attr(buf, "none");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	snprintf(buf + n, sizeof(buf) - n, "/active_low");
+	ret = rte_pmd_gpio_set_pin_active_low(dev_id, gpio, 1);
+	CNXK_GPIO_ERR_STR(ret, "failed to set active_low to 1");
+	ret = cnxk_gpio_validate_attr(buf, "1");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_get_pin_active_low(dev_id, gpio, &val);
+	CNXK_GPIO_ERR_STR(ret, "failed to read active_low");
+	if (val != 1)
+		ret = -EIO;
+	CNXK_GPIO_ERR_STR(ret, "read %d instead of 1", val);
+
+	snprintf(buf + n, sizeof(buf) - n, "/value");
+	ret = rte_pmd_gpio_set_pin_value(dev_id, gpio, 1);
+	CNXK_GPIO_ERR_STR(ret, "failed to set value to 1");
+	ret = cnxk_gpio_validate_attr(buf, "1");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	ret = rte_pmd_gpio_set_pin_value(dev_id, gpio, 0);
+	CNXK_GPIO_ERR_STR(ret, "failed to set value to 0");
+	ret = cnxk_gpio_validate_attr(buf, "0");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+	snprintf(buf + n, sizeof(buf) - n, "/active_low");
+	ret = rte_pmd_gpio_set_pin_active_low(dev_id, gpio, 0);
+	CNXK_GPIO_ERR_STR(ret, "failed to set active_low to 0");
+	ret = cnxk_gpio_validate_attr(buf, "0");
+	CNXK_GPIO_ERR_STR(ret, "failed to validate %s", buf);
+
+out:
+	return ret;
+}
+
+int
+cnxk_gpio_selftest(uint16_t dev_id)
+{
+	struct cnxk_gpiochip *gpiochip;
+	unsigned int queues, i, size;
+	char buf[CNXK_GPIO_BUFSZ];
+	struct rte_rawdev *rawdev;
+	struct cnxk_gpio *gpio;
+	int ret;
+
+	rawdev = rte_rawdev_pmd_get_named_dev("cnxk_gpio");
+	gpiochip = rawdev->dev_private;
+
+	queues = rte_rawdev_queue_count(dev_id);
+	if (queues == 0)
+		return -ENODEV;
+
+	ret = rte_rawdev_start(dev_id);
+	if (ret)
+		return ret;
+
+	fd = open("/dev/otx-gpio-ctr", O_RDWR | O_SYNC);
+	if (fd < 0)
+		return -errno;
+
+	for (i = 0; i < queues; i++) {
+		RTE_LOG(INFO, PMD, "testing queue %d (gpio%d)\n", i,
+			gpiochip->base + i);
+
+		ret = rte_rawdev_queue_conf_get(dev_id, i, &size, sizeof(size));
+		if (ret) {
+			RTE_LOG(ERR, PMD,
+				"failed to read queue configuration (%d)\n",
+				ret);
+			continue;
+		}
+
+		if (size != 1) {
+			RTE_LOG(ERR, PMD, "wrong queue size received\n");
+			continue;
+		}
+
+		ret = rte_rawdev_queue_setup(dev_id, i, NULL, 0);
+		if (ret) {
+			RTE_LOG(ERR, PMD, "failed to setup queue (%d)\n", ret);
+			continue;
+		}
+
+		gpio = gpiochip->gpios[i];
+		snprintf(buf, sizeof(buf), CNXK_GPIO_PATH_FMT, gpio->num);
+		if (!cnxk_gpio_attr_exists(buf)) {
+			RTE_LOG(ERR, PMD, "%s does not exist\n", buf);
+			continue;
+		}
+
+		ret = cnxk_gpio_test_input(dev_id, gpiochip->base, i);
+		if (ret)
+			goto release;
+
+		ret = cnxk_gpio_test_irq(dev_id, i);
+		if (ret)
+			goto release;
+
+		ret = cnxk_gpio_test_output(dev_id, gpiochip->base, i);
+		if (ret)
+			goto release;
+
+release:
+		ret = rte_rawdev_queue_release(dev_id, i);
+		if (ret) {
+			RTE_LOG(ERR, PMD, "failed to release queue (%d)\n",
+				ret);
+			continue;
+		}
+
+		if (cnxk_gpio_attr_exists(buf)) {
+			RTE_LOG(ERR, PMD, "%s still exists\n", buf);
+			continue;
+		}
+	}
+
+	close(fd);
+
+	return 0;
+}
diff --git a/drivers/raw/cnxk_gpio/meson.build b/drivers/raw/cnxk_gpio/meson.build
index 9b55f029c7..a75a5b9084 100644
--- a/drivers/raw/cnxk_gpio/meson.build
+++ b/drivers/raw/cnxk_gpio/meson.build
@@ -6,5 +6,6 @@  deps += ['bus_vdev', 'common_cnxk', 'rawdev', 'kvargs']
 sources = files(
         'cnxk_gpio.c',
         'cnxk_gpio_irq.c',
+        'cnxk_gpio_selftest.c',
 )
 headers = files('rte_pmd_cnxk_gpio.h')