mbox

[v5,0/2] Enable PMD power management on Arm

Message ID 20221214081430.1717903-1-feifei.wang2@arm.com (mailing list archive)
Headers

Message

Feifei Wang Dec. 14, 2022, 8:14 a.m. UTC 
  For Arm aarch, use WFE instructions to enable PMD power management.

Test Results:
dynamic instructions over 1sec	without wfe	with wfe	percentage
ampere-altra			6,298,483,712	9,117,624	-99.855%
thunderx2			6,990,909,373	3,247,226	-99.954%

When power efficient PMD is enabled by using WFE on Arm, if no pkts
received, the instructions that CPU executes is reduced by 99%.

V2:
1. move rte_wake_up API out of signal_exit(David Marchand, Thomas, Stephen)
2. Add test results when using wfe on ARM server

v3:
1. make code cleaner (Stephen)

v4:
1. add support check in API (Thomas)

v5:
1. delete v4 check patch and l3fwd-power change. This is due to
that WFE instructions can be applied into all lcores. 
When all cores are in 'WFE' state, kernal can run normally and
receive interrupt signal to send it to the l3fwd-power thread.
Thus core in 'WFE' state can exit from sleeping by interrupt event.


Feifei Wang (2):
  eal: add 8 bits case for wait scheme
  eal: add power mgmt support on Arm

 lib/eal/arm/include/rte_pause_64.h | 32 +++++++++++--
 lib/eal/arm/rte_cpuflags.c         |  5 +++
 lib/eal/arm/rte_power_intrinsics.c | 72 ++++++++++++++++++++++++++++--
 3 files changed, 102 insertions(+), 7 deletions(-)