@@ -425,7 +425,7 @@ fman_if_init(const struct device_node *dpa_node)
char_prop = of_get_property(mac_node, "phy-connection-type",
NULL);
if (!char_prop) {
- printf("memac: unknown MII type assuming 1G\n");
+ FMAN_ERR(-EINVAL, "memac: unknown MII type assuming 1G\n");
/* Right now forcing memac to 1g in case of error*/
__if->__if.mac_type = fman_mac_1g;
} else {
@@ -723,10 +723,8 @@ fman_finish(void)
/* release the mapping */
_errno = munmap(__if->ccsr_map, __if->regs_size);
if (unlikely(_errno < 0))
- fprintf(stderr, "%s:%d:%s(): munmap() = %d (%s)\n",
- __FILE__, __LINE__, __func__,
- -errno, strerror(errno));
- printf("Tearing down %s\n", __if->node_path);
+ FMAN_ERR(_errno, "munmap() = (%s)\n", strerror(errno));
+ DPAA_BUS_INFO("Tearing down %s\n", __if->node_path);
list_del(&__if->__if.node);
rte_free(__if);
}
@@ -13,6 +13,7 @@
#include "process.h"
#include <fsl_usd.h>
+#include "rte_dpaa_logs.h"
/* As higher-level drivers will be built on top of this (dma_mem, qbman, ...),
* it's preferable that the process driver itself not provide any exported API.
@@ -99,12 +100,12 @@ void process_release(enum dpaa_id_type id_type, uint32_t base, uint32_t num)
int ret = check_fd();
if (ret) {
- fprintf(stderr, "Process FD failure\n");
+ DPAA_BUS_ERR("Process FD failure\n");
return;
}
ret = ioctl(fd, DPAA_IOCTL_ID_RELEASE, &id);
if (ret)
- fprintf(stderr, "Process FD ioctl failure type %d base 0x%x num %d\n",
+ DPAA_BUS_ERR("Process FD ioctl failure type %d base 0x%x num %d\n",
id_type, base, num);
}
@@ -333,9 +334,9 @@ int dpaa_intr_disable(char *if_name)
ret = ioctl(fd, DPAA_IOCTL_DISABLE_LINK_STATUS_INTERRUPT, if_name);
if (ret) {
if (errno == EINVAL)
- printf("Failed to disable interrupt: Not Supported\n");
+ DPAA_BUS_ERR("Failed to disable interrupt: Not Supported\n");
else
- printf("Failed to disable interrupt\n");
+ DPAA_BUS_ERR("Failed to disable interrupt\n");
return ret;
}
@@ -357,7 +358,7 @@ int dpaa_get_ioctl_version_number(void)
if (errno == EINVAL) {
version_num = 1;
} else {
- printf("Failed to get ioctl version number\n");
+ DPAA_BUS_ERR("Failed to get ioctl version number\n");
version_num = -1;
}
}
@@ -388,7 +389,7 @@ int dpaa_get_link_status(char *if_name, struct rte_eth_link *link)
ret = ioctl(fd, DPAA_IOCTL_GET_LINK_STATUS, &args);
if (ret) {
- printf("Failed to get link status\n");
+ DPAA_BUS_ERR("Failed to get link status\n");
return ret;
}
@@ -404,9 +405,9 @@ int dpaa_get_link_status(char *if_name, struct rte_eth_link *link)
ret = ioctl(fd, DPAA_IOCTL_GET_LINK_STATUS_OLD, &args);
if (ret) {
if (errno == EINVAL)
- printf("Get link status: Not Supported\n");
+ DPAA_BUS_ERR("Get link status: Not Supported\n");
else
- printf("Failed to get link status\n");
+ DPAA_BUS_ERR("Failed to get link status\n");
return ret;
}
@@ -434,9 +435,9 @@ int dpaa_update_link_status(char *if_name, int link_status)
ret = ioctl(fd, DPAA_IOCTL_UPDATE_LINK_STATUS, &args);
if (ret) {
if (errno == EINVAL)
- printf("Failed to set link status: Not Supported\n");
+ DPAA_BUS_ERR("Failed to set link status: Not Supported\n");
else
- printf("Failed to set link status");
+ DPAA_BUS_ERR("Failed to set link status");
return ret;
}
@@ -462,9 +463,9 @@ int dpaa_update_link_speed(char *if_name, int link_speed, int link_duplex)
ret = ioctl(fd, DPAA_IOCTL_UPDATE_LINK_SPEED, &args);
if (ret) {
if (errno == EINVAL)
- printf("Failed to set link speed: Not Supported\n");
+ DPAA_BUS_ERR("Failed to set link speed: Not Supported\n");
else
- printf("Failed to set link speed\n");
+ DPAA_BUS_ERR("Failed to set link speed\n");
return ret;
}
@@ -484,9 +485,9 @@ int dpaa_restart_link_autoneg(char *if_name)
ret = ioctl(fd, DPAA_IOCTL_RESTART_LINK_AUTONEG, if_name);
if (ret) {
if (errno == EINVAL)
- printf("Failed to restart autoneg: Not Supported\n");
+ DPAA_BUS_ERR("Failed to restart autoneg: Not Supported\n");
else
- printf("Failed to restart autoneg\n");
+ DPAA_BUS_ERR("Failed to restart autoneg\n");
return ret;
}
@@ -818,7 +818,7 @@ qman_ern_poll_free(void)
fd = &swapped_msg.ern.fd;
if (unlikely(verb & 0x20)) {
- printf("HW ERN notification, Nothing to do\n");
+ pr_warn("HW ERN notification, Nothing to do\n");
} else {
if ((fd->bpid & 0xff) != 0xff)
qman_free_mbuf_cb(fd);
@@ -395,7 +395,7 @@ rte_fslmc_vfio_mem_dmamap(uint64_t vaddr, uint64_t iova, uint64_t size)
ret = ioctl(group->container->fd, VFIO_IOMMU_MAP_DMA,
&dma_map);
if (ret) {
- printf("Unable to map DMA address (errno = %d)\n",
+ DPAA2_BUS_ERR("Unable to map DMA address (errno = %d)\n",
errno);
return ret;
}
@@ -1879,7 +1879,7 @@ void qbman_pull_desc_set_rad(struct qbman_pull_desc *d, int rad)
else
d->pull.verb &= ~(1 << QB_VDQCR_VERB_RAD_SHIFT);
} else {
- printf("The RAD feature is not valid when RLS = 0\n");
+ pr_warn("The RAD feature is not valid when RLS = 0\n");
}
}
@@ -587,7 +587,7 @@ hw_poll_job_ring(struct sec_job_ring_t *job_ring,
/* todo check if it is false alarm no desc present */
if (!current_desc_addr) {
false_alarm++;
- printf("false alarm %" PRIu64 "real %" PRIu64
+ CAAM_JR_ERR("false alarm %" PRIu64 "real %" PRIu64
" sec_err =0x%x cidx Index =0%d\n",
false_alarm, real_poll,
sec_error_code, job_ring->cidx);
@@ -418,7 +418,7 @@ sec_configure(void)
d = opendir(SEC_UIO_DEVICE_SYS_ATTR_PATH);
if (d == NULL) {
- printf("\nError opening directory '%s': %s\n",
+ CAAM_JR_ERR("Error opening directory '%s': %s\n",
SEC_UIO_DEVICE_SYS_ATTR_PATH, strerror(errno));
return -1;
}
@@ -282,9 +282,9 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev)
dpaa_interrupt_handler,
(void *)dev);
if (ret == EINVAL)
- printf("Failed to enable interrupt: Not Supported\n");
+ DPAA_PMD_ERR("Failed to enable interrupt: Not Supported\n");
else
- printf("Failed to enable interrupt\n");
+ DPAA_PMD_ERR("Failed to enable interrupt\n");
}
dev->data->dev_conf.intr_conf.lsc = 0;
dev->data->dev_flags &= ~RTE_ETH_DEV_INTR_LSC;
@@ -340,7 +340,7 @@ dpaa_eth_dev_configure(struct rte_eth_dev *dev)
dpaa_update_link_speed(__fif->node_name, speed, duplex);
} else {
/* Manual autoneg - custom advertisement speed. */
- printf("Custom Advertisement speeds not supported\n");
+ DPAA_PMD_ERR("Custom Advertisement speeds not supported\n");
}
}
@@ -68,7 +68,7 @@ static void fm_prev_cleanup(void)
fm_info.fman_handle = fm_open(fman_id);
if (!fm_info.fman_handle) {
- printf("\n%s- unable to open FMAN", __func__);
+ DPAA_PMD_ERR("unable to open FMAN");
return;
}
@@ -78,7 +78,7 @@ static void fm_prev_cleanup(void)
/* FM PCD Open */
fm_info.pcd_handle = fm_pcd_open(&fm_pcd_params);
if (!fm_info.pcd_handle) {
- printf("\n%s- unable to open PCD", __func__);
+ DPAA_PMD_ERR("unable to open PCD");
return;
}
@@ -108,11 +108,11 @@ static void fm_prev_cleanup(void)
continue;
if (dpaa_fm_deconfig(&dpaa_intf, NULL))
- printf("\nDPAA FM deconfig failed\n");
+ DPAA_PMD_ERR("DPAA FM deconfig failed\n");
}
if (dpaa_fm_term())
- printf("\nDPAA FM term failed\n");
+ DPAA_PMD_ERR("DPAA FM term failed\n");
memset(&fm_model, 0, sizeof(struct dpaa_fm_model));
}
@@ -103,7 +103,7 @@ static void dpaa_display_frame_info(const struct qm_fd *fd,
for (ii = 0; ii < fd->length20; ii++) {
DISPLAY_PRINT("%02x ", ptr[ii]);
if (((ii + 1) % 16) == 0)
- printf("\n");
+ DISPLAY_PRINT("\n");
}
DISPLAY_PRINT("\n");
}
@@ -2682,7 +2682,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev)
priv->max_vlan_filters = attr.vlan_filter_entries;
priv->flags = 0;
#if defined(RTE_LIBRTE_IEEE1588)
- printf("DPDK IEEE1588 is enabled\n");
+ DPAA2_PMD_INFO("DPDK IEEE1588 is enabled\n");
priv->flags |= DPAA2_TX_CONF_ENABLE;
#endif
/* Used with ``fslmc:dpni.1,drv_tx_conf=1`` */
@@ -499,7 +499,7 @@ dpaa2_node_add(struct rte_eth_dev *dev, uint32_t node_id,
node->channel_id = priv->channel_inuse;
priv->channel_inuse++;
} else {
- printf("error no channel id available\n");
+ DPAA2_PMD_ERR("error no channel id available\n");
}
}
@@ -580,7 +580,7 @@ dpaa2_tm_configure_queue(struct rte_eth_dev *dev, struct dpaa2_tm_node *node)
flow_id = 0;
if (dpaa2_q == NULL) {
- printf("Queue is not configured for node = %d\n", node->id);
+ DPAA2_PMD_ERR("Queue is not configured for node = %d\n", node->id);
return -1;
}
@@ -590,7 +590,7 @@ dpaa2_tm_configure_queue(struct rte_eth_dev *dev, struct dpaa2_tm_node *node)
((node->parent->channel_id << 8) | tc_id),
flow_id, options, &tx_flow_cfg);
if (ret) {
- printf("Error in setting the tx flow: "
+ DPAA2_PMD_ERR("Error in setting the tx flow: "
"channel id = %d tc_id= %d, param = 0x%x "
"flow=%d err=%d\n", node->parent->channel_id, tc_id,
((node->parent->channel_id << 8) | tc_id), flow_id,
@@ -605,7 +605,7 @@ dpaa2_tm_configure_queue(struct rte_eth_dev *dev, struct dpaa2_tm_node *node)
DPNI_QUEUE_TX, ((node->parent->channel_id << 8) | dpaa2_q->tc_index),
dpaa2_q->flow_id, &tx_flow_cfg, &qid);
if (ret) {
- printf("Error in getting LFQID err=%d", ret);
+ DPAA2_PMD_ERR("Error in getting LFQID err=%d", ret);
return -1;
}
dpaa2_q->fqid = qid.fqid;
@@ -636,7 +636,7 @@ dpaa2_tm_configure_queue(struct rte_eth_dev *dev, struct dpaa2_tm_node *node)
((node->parent->channel_id << 8) | tc_id),
&cong_notif_cfg);
if (ret) {
- printf("Error in setting tx congestion notification: "
+ DPAA2_PMD_ERR("Error in setting tx congestion notification: "
"err=%d", ret);
return -ret;
}