ethdev: clarify device queue state after start and stop
Checks
Commit Message
Drivers start/stop device queues on port start/stop, but not all drivers
update queue state accordingly.
This becomes more visible if a specific queue stopped explicitly and
port stopped/started later, in this case although all queues are
started, the state of that specific queue is stopped and it is
misleading.
Misrepresentation of queue state became a defect with commit [1] that
does forwarding decision based on queue state and commit [2] that gets
up to date queue state from ethdev/device before forwarding.
[1]
commit 3c4426db54fc ("app/testpmd: do not poll stopped queues")
[2]
commit 5028f207a4fa ("app/testpmd: fix secondary process packet forwarding")
This patch documents that status of all queues of a device should be
`RTE_ETH_QUEUE_STATE_STOPPED` after port stop and their status should
be`RTE_ETH_QUEUE_STATE_STARTED` after port start.
Also an unit test added to verify drivers.
Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
---
Cc: Jie Hai <haijie1@huawei.com>
Cc: Song Jiale <songx.jiale@intel.com>
Cc: Yuan Peng <yuan.peng@intel.com>
Cc: Raslan Darawsheh <rasland@nvidia.com>
Cc: Qiming Yang <qiming.yang@intel.com>
Cc: Ivan Malov <ivan.malov@arknetworks.am>
Cc: Huisong Li <lihuisong@huawei.com>
v1:
* fix memset
* remove commented out code
* update unit test to skip queue state if
rte_eth_[rt]x_queue_info_get() is not supported
---
app/test/meson.build | 1 +
app/test/test_ethdev_api.c | 184 +++++++++++++++++++++++++++++++++++++
lib/ethdev/rte_ethdev.h | 5 +
3 files changed, 190 insertions(+)
create mode 100644 app/test/test_ethdev_api.c
Comments
Hello Ferruh,
On Thu, Sep 28, 2023 at 10:59 PM Ferruh Yigit <ferruh.yigit@amd.com> wrote:
>
> Drivers start/stop device queues on port start/stop, but not all drivers
> update queue state accordingly.
>
> This becomes more visible if a specific queue stopped explicitly and
> port stopped/started later, in this case although all queues are
> started, the state of that specific queue is stopped and it is
> misleading.
>
> Misrepresentation of queue state became a defect with commit [1] that
> does forwarding decision based on queue state and commit [2] that gets
> up to date queue state from ethdev/device before forwarding.
>
> [1]
> commit 3c4426db54fc ("app/testpmd: do not poll stopped queues")
>
> [2]
> commit 5028f207a4fa ("app/testpmd: fix secondary process packet forwarding")
>
> This patch documents that status of all queues of a device should be
> `RTE_ETH_QUEUE_STATE_STOPPED` after port stop and their status should
> be`RTE_ETH_QUEUE_STATE_STARTED` after port start.
>
> Also an unit test added to verify drivers.
>
> Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
> ---
> Cc: Jie Hai <haijie1@huawei.com>
> Cc: Song Jiale <songx.jiale@intel.com>
> Cc: Yuan Peng <yuan.peng@intel.com>
> Cc: Raslan Darawsheh <rasland@nvidia.com>
> Cc: Qiming Yang <qiming.yang@intel.com>
> Cc: Ivan Malov <ivan.malov@arknetworks.am>
> Cc: Huisong Li <lihuisong@huawei.com>
>
> v1:
> * fix memset
> * remove commented out code
> * update unit test to skip queue state if
> rte_eth_[rt]x_queue_info_get() is not supported
> ---
> app/test/meson.build | 1 +
> app/test/test_ethdev_api.c | 184 +++++++++++++++++++++++++++++++++++++
> lib/ethdev/rte_ethdev.h | 5 +
> 3 files changed, 190 insertions(+)
> create mode 100644 app/test/test_ethdev_api.c
>
> diff --git a/app/test/meson.build b/app/test/meson.build
> index 05bae9216dbc..05bbe84868f6 100644
> --- a/app/test/meson.build
> +++ b/app/test/meson.build
> @@ -65,6 +65,7 @@ source_file_deps = {
> 'test_efd_perf.c': ['efd', 'hash'],
> 'test_errno.c': [],
> 'test_ethdev_link.c': ['ethdev'],
> + 'test_ethdev_api.c': ['ethdev'],
Nit: aphabetical sort
> 'test_event_crypto_adapter.c': ['cryptodev', 'eventdev', 'bus_vdev'],
> 'test_event_eth_rx_adapter.c': ['ethdev', 'eventdev', 'bus_vdev'],
> 'test_event_eth_tx_adapter.c': ['bus_vdev', 'ethdev', 'net_ring', 'eventdev'],
> diff --git a/app/test/test_ethdev_api.c b/app/test/test_ethdev_api.c
> new file mode 100644
> index 000000000000..68239f82ff33
> --- /dev/null
> +++ b/app/test/test_ethdev_api.c
> @@ -0,0 +1,184 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright (C) 2023, Advanced Micro Devices, Inc.
> + */
> +
> +#include <rte_log.h>
> +#include <rte_ethdev.h>
> +
> +#include <rte_test.h>
> +#include "test.h"
> +
> +#define NUM_RXQ 2
> +#define NUM_TXQ 2
> +#define NUM_RXD 512
> +#define NUM_TXD 512
> +#define NUM_MBUF 1024
> +#define MBUF_CACHE_SIZE 256
> +
> +static int32_t
> +ethdev_api_queue_status(void)
> +{
> + struct rte_eth_dev_info dev_info;
> + struct rte_eth_rxq_info rx_qinfo;
> + struct rte_eth_txq_info tx_qinfo;
> + struct rte_mempool *mbuf_pool;
> + struct rte_eth_conf eth_conf;
> + uint16_t port_id;
> + int ret;
> +
Should we return TEST_SKIPPED if no ethdev port is present?
It seems more valid to me than returning TEST_SUCCESS.
> + mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUF, MBUF_CACHE_SIZE, 0,
> + RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
> +
> + RTE_ETH_FOREACH_DEV(port_id) {
> + memset(ð_conf, 0, sizeof(eth_conf));
> + ret = rte_eth_dev_configure(port_id, NUM_RXQ, NUM_TXQ, ð_conf);
> + TEST_ASSERT(ret == 0,
> + "Port(%u) failed to configure.\n", port_id);
> +
> + /* RxQ setup */
> + for (uint16_t queue_id = 0; queue_id < NUM_RXQ; queue_id++) {
> + ret = rte_eth_rx_queue_setup(port_id, queue_id, NUM_RXD,
> + rte_socket_id(), NULL, mbuf_pool);
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to setup RxQ.\n",
> + port_id, queue_id);
> + }
> +
> + /* TxQ setup */
> + for (uint16_t queue_id = 0; queue_id < NUM_TXQ; queue_id++) {
> + ret = rte_eth_tx_queue_setup(port_id, queue_id, NUM_TXD,
> + rte_socket_id(), NULL);
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to setup TxQ.\n",
> + port_id, queue_id);
> + }
> +
> + ret = rte_eth_dev_info_get(port_id, &dev_info);
> + TEST_ASSERT(ret == 0,
> + "Port(%u) failed to get dev info.\n", port_id);
> +
> + /* Initial RxQ */
> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
> + ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
> + if (ret == -ENOTSUP)
> + continue;
> +
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to get RxQ info.\n",
> + port_id, queue_id);
> +
> + TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
> + "Wrong initial Rx queue(%u) state(%d)\n",
> + queue_id, rx_qinfo.queue_state);
> + }
> +
> + /* Initial TxQ */
> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
> + ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
> + if (ret == -ENOTSUP)
> + continue;
> +
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to get TxQ info.\n",
> + port_id, queue_id);
> +
> + TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
> + "Wrong initial Tx queue(%u) state(%d)\n",
> + queue_id, tx_qinfo.queue_state);
> + }
> +
> +
> + ret = rte_eth_dev_start(port_id);
> + TEST_ASSERT(ret == 0,
> + "Port(%u) failed to start.\n", port_id);
> +
> + /* Started RxQ */
> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
> + ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
> + if (ret == -ENOTSUP)
> + continue;
> +
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to get RxQ info.\n",
> + port_id, queue_id);
> +
> + TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STARTED,
> + "Wrong started Rx queue(%u) state(%d)\n",
> + queue_id, rx_qinfo.queue_state);
> + }
> +
> + /* Started TxQ */
> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
> + ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
> + if (ret == -ENOTSUP)
> + continue;
> +
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to get TxQ info.\n",
> + port_id, queue_id);
> +
> + TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STARTED,
> + "Wrong started Tx queue(%u) state(%d)\n",
> + queue_id, tx_qinfo.queue_state);
> + }
> +
> +
Nit: I would remove one of those empty lines.
> + ret = rte_eth_dev_stop(port_id);
> + TEST_ASSERT(ret == 0,
> + "Port(%u) failed to stop.\n", port_id);
> +
> + /* Stopped RxQ */
> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
> + ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
> + if (ret == -ENOTSUP)
> + continue;
> +
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to get RxQ info.\n",
> + port_id, queue_id);
> +
> + TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
> + "Wrong stopped Rx queue(%u) state(%d)\n",
> + queue_id, rx_qinfo.queue_state);
> + }
> +
> + /* Stopped TxQ */
> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
> + ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
> + if (ret == -ENOTSUP)
> + continue;
> +
> + TEST_ASSERT(ret == 0,
> + "Port(%u), queue(%u) failed to get TxQ info.\n",
> + port_id, queue_id);
> +
> + TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
> + "Wrong stopped Tx queue(%u) state(%d)\n",
> + queue_id, tx_qinfo.queue_state);
> + }
> + }
> +
> + return TEST_SUCCESS;
> +}
> +
> +static struct unit_test_suite ethdev_api_testsuite = {
> + .suite_name = "ethdev API tests",
> + .setup = NULL,
> + .teardown = NULL,
> + .unit_test_cases = {
> + TEST_CASE(ethdev_api_queue_status),
> + /* TODO: Add deferred_start queue status test */
> + TEST_CASES_END() /**< NULL terminate unit test array */
> + }
> +};
> +
> +static int
> +test_ethdev_api(void)
> +{
> + rte_log_set_global_level(RTE_LOG_DEBUG);
> + rte_log_set_level(RTE_LOGTYPE_EAL, RTE_LOG_DEBUG);
> +
> + return unit_test_suite_runner(ðdev_api_testsuite);
> +}
> +
> +REGISTER_TEST_COMMAND(ethdev_api, test_ethdev_api);
REGISTER_FAST_TEST or REGISTER_DRIVER_TEST.
> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
> index 8542257721c9..6441fe049b06 100644
> --- a/lib/ethdev/rte_ethdev.h
> +++ b/lib/ethdev/rte_ethdev.h
> @@ -2812,6 +2812,9 @@ int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id);
> * Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before
> * PMD port start callback function is invoked.
> *
> + * All device queues (except form deferred start queues) status should be
> + * `RTE_ETH_QUEUE_STATE_STARTED` after start.
> + *
> * On success, all basic functions exported by the Ethernet API (link status,
> * receive/transmit, and so on) can be invoked.
> *
> @@ -2828,6 +2831,8 @@ int rte_eth_dev_start(uint16_t port_id);
> * Stop an Ethernet device. The device can be restarted with a call to
> * rte_eth_dev_start()
> *
> + * All device queues status should be `RTE_ETH_QUEUE_STATE_STOPPED` after stop.
> + *
> * @param port_id
> * The port identifier of the Ethernet device.
> * @return
> --
> 2.34.1
>
The rest lgtm.
On 10/12/2023 10:33 AM, David Marchand wrote:
> Hello Ferruh,
>
> On Thu, Sep 28, 2023 at 10:59 PM Ferruh Yigit <ferruh.yigit@amd.com> wrote:
>>
>> Drivers start/stop device queues on port start/stop, but not all drivers
>> update queue state accordingly.
>>
>> This becomes more visible if a specific queue stopped explicitly and
>> port stopped/started later, in this case although all queues are
>> started, the state of that specific queue is stopped and it is
>> misleading.
>>
>> Misrepresentation of queue state became a defect with commit [1] that
>> does forwarding decision based on queue state and commit [2] that gets
>> up to date queue state from ethdev/device before forwarding.
>>
>> [1]
>> commit 3c4426db54fc ("app/testpmd: do not poll stopped queues")
>>
>> [2]
>> commit 5028f207a4fa ("app/testpmd: fix secondary process packet forwarding")
>>
>> This patch documents that status of all queues of a device should be
>> `RTE_ETH_QUEUE_STATE_STOPPED` after port stop and their status should
>> be`RTE_ETH_QUEUE_STATE_STARTED` after port start.
>>
>> Also an unit test added to verify drivers.
>>
>> Signed-off-by: Ferruh Yigit <ferruh.yigit@amd.com>
>> ---
>> Cc: Jie Hai <haijie1@huawei.com>
>> Cc: Song Jiale <songx.jiale@intel.com>
>> Cc: Yuan Peng <yuan.peng@intel.com>
>> Cc: Raslan Darawsheh <rasland@nvidia.com>
>> Cc: Qiming Yang <qiming.yang@intel.com>
>> Cc: Ivan Malov <ivan.malov@arknetworks.am>
>> Cc: Huisong Li <lihuisong@huawei.com>
>>
>> v1:
>> * fix memset
>> * remove commented out code
>> * update unit test to skip queue state if
>> rte_eth_[rt]x_queue_info_get() is not supported
>> ---
>> app/test/meson.build | 1 +
>> app/test/test_ethdev_api.c | 184 +++++++++++++++++++++++++++++++++++++
>> lib/ethdev/rte_ethdev.h | 5 +
>> 3 files changed, 190 insertions(+)
>> create mode 100644 app/test/test_ethdev_api.c
>>
>> diff --git a/app/test/meson.build b/app/test/meson.build
>> index 05bae9216dbc..05bbe84868f6 100644
>> --- a/app/test/meson.build
>> +++ b/app/test/meson.build
>> @@ -65,6 +65,7 @@ source_file_deps = {
>> 'test_efd_perf.c': ['efd', 'hash'],
>> 'test_errno.c': [],
>> 'test_ethdev_link.c': ['ethdev'],
>> + 'test_ethdev_api.c': ['ethdev'],
>
> Nit: aphabetical sort
>
ack
>> 'test_event_crypto_adapter.c': ['cryptodev', 'eventdev', 'bus_vdev'],
>> 'test_event_eth_rx_adapter.c': ['ethdev', 'eventdev', 'bus_vdev'],
>> 'test_event_eth_tx_adapter.c': ['bus_vdev', 'ethdev', 'net_ring', 'eventdev'],
>> diff --git a/app/test/test_ethdev_api.c b/app/test/test_ethdev_api.c
>> new file mode 100644
>> index 000000000000..68239f82ff33
>> --- /dev/null
>> +++ b/app/test/test_ethdev_api.c
>> @@ -0,0 +1,184 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause
>> + * Copyright (C) 2023, Advanced Micro Devices, Inc.
>> + */
>> +
>> +#include <rte_log.h>
>> +#include <rte_ethdev.h>
>> +
>> +#include <rte_test.h>
>> +#include "test.h"
>> +
>> +#define NUM_RXQ 2
>> +#define NUM_TXQ 2
>> +#define NUM_RXD 512
>> +#define NUM_TXD 512
>> +#define NUM_MBUF 1024
>> +#define MBUF_CACHE_SIZE 256
>> +
>> +static int32_t
>> +ethdev_api_queue_status(void)
>> +{
>> + struct rte_eth_dev_info dev_info;
>> + struct rte_eth_rxq_info rx_qinfo;
>> + struct rte_eth_txq_info tx_qinfo;
>> + struct rte_mempool *mbuf_pool;
>> + struct rte_eth_conf eth_conf;
>> + uint16_t port_id;
>> + int ret;
>> +
>
> Should we return TEST_SKIPPED if no ethdev port is present?
> It seems more valid to me than returning TEST_SUCCESS.
>
+1 to TEST_SKIPPED
>
>> + mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUF, MBUF_CACHE_SIZE, 0,
>> + RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
>> +
>> + RTE_ETH_FOREACH_DEV(port_id) {
>> + memset(ð_conf, 0, sizeof(eth_conf));
>> + ret = rte_eth_dev_configure(port_id, NUM_RXQ, NUM_TXQ, ð_conf);
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u) failed to configure.\n", port_id);
>> +
>> + /* RxQ setup */
>> + for (uint16_t queue_id = 0; queue_id < NUM_RXQ; queue_id++) {
>> + ret = rte_eth_rx_queue_setup(port_id, queue_id, NUM_RXD,
>> + rte_socket_id(), NULL, mbuf_pool);
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to setup RxQ.\n",
>> + port_id, queue_id);
>> + }
>> +
>> + /* TxQ setup */
>> + for (uint16_t queue_id = 0; queue_id < NUM_TXQ; queue_id++) {
>> + ret = rte_eth_tx_queue_setup(port_id, queue_id, NUM_TXD,
>> + rte_socket_id(), NULL);
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to setup TxQ.\n",
>> + port_id, queue_id);
>> + }
>> +
>> + ret = rte_eth_dev_info_get(port_id, &dev_info);
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u) failed to get dev info.\n", port_id);
>> +
>> + /* Initial RxQ */
>> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
>> + ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
>> + if (ret == -ENOTSUP)
>> + continue;
>> +
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to get RxQ info.\n",
>> + port_id, queue_id);
>> +
>> + TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
>> + "Wrong initial Rx queue(%u) state(%d)\n",
>> + queue_id, rx_qinfo.queue_state);
>> + }
>> +
>> + /* Initial TxQ */
>> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
>> + ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
>> + if (ret == -ENOTSUP)
>> + continue;
>> +
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to get TxQ info.\n",
>> + port_id, queue_id);
>> +
>> + TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
>> + "Wrong initial Tx queue(%u) state(%d)\n",
>> + queue_id, tx_qinfo.queue_state);
>> + }
>> +
>> +
>> + ret = rte_eth_dev_start(port_id);
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u) failed to start.\n", port_id);
>> +
>> + /* Started RxQ */
>> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
>> + ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
>> + if (ret == -ENOTSUP)
>> + continue;
>> +
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to get RxQ info.\n",
>> + port_id, queue_id);
>> +
>> + TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STARTED,
>> + "Wrong started Rx queue(%u) state(%d)\n",
>> + queue_id, rx_qinfo.queue_state);
>> + }
>> +
>> + /* Started TxQ */
>> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
>> + ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
>> + if (ret == -ENOTSUP)
>> + continue;
>> +
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to get TxQ info.\n",
>> + port_id, queue_id);
>> +
>> + TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STARTED,
>> + "Wrong started Tx queue(%u) state(%d)\n",
>> + queue_id, tx_qinfo.queue_state);
>> + }
>> +
>> +
>
> Nit: I would remove one of those empty lines.
>
ack
>> + ret = rte_eth_dev_stop(port_id);
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u) failed to stop.\n", port_id);
>> +
>> + /* Stopped RxQ */
>> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
>> + ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
>> + if (ret == -ENOTSUP)
>> + continue;
>> +
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to get RxQ info.\n",
>> + port_id, queue_id);
>> +
>> + TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
>> + "Wrong stopped Rx queue(%u) state(%d)\n",
>> + queue_id, rx_qinfo.queue_state);
>> + }
>> +
>> + /* Stopped TxQ */
>> + for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
>> + ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
>> + if (ret == -ENOTSUP)
>> + continue;
>> +
>> + TEST_ASSERT(ret == 0,
>> + "Port(%u), queue(%u) failed to get TxQ info.\n",
>> + port_id, queue_id);
>> +
>> + TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
>> + "Wrong stopped Tx queue(%u) state(%d)\n",
>> + queue_id, tx_qinfo.queue_state);
>> + }
>> + }
>> +
>> + return TEST_SUCCESS;
>> +}
>> +
>> +static struct unit_test_suite ethdev_api_testsuite = {
>> + .suite_name = "ethdev API tests",
>> + .setup = NULL,
>> + .teardown = NULL,
>> + .unit_test_cases = {
>> + TEST_CASE(ethdev_api_queue_status),
>> + /* TODO: Add deferred_start queue status test */
>> + TEST_CASES_END() /**< NULL terminate unit test array */
>> + }
>> +};
>> +
>> +static int
>> +test_ethdev_api(void)
>> +{
>> + rte_log_set_global_level(RTE_LOG_DEBUG);
>> + rte_log_set_level(RTE_LOGTYPE_EAL, RTE_LOG_DEBUG);
>> +
>> + return unit_test_suite_runner(ðdev_api_testsuite);
>> +}
>> +
>> +REGISTER_TEST_COMMAND(ethdev_api, test_ethdev_api);
>
> REGISTER_FAST_TEST or REGISTER_DRIVER_TEST.
>
This is not driver test, and not ready enough to add fast test, we need
to be sure all drivers updates queue state properly, so for now I think
better to keep macro as it is.
>
>> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
>> index 8542257721c9..6441fe049b06 100644
>> --- a/lib/ethdev/rte_ethdev.h
>> +++ b/lib/ethdev/rte_ethdev.h
>> @@ -2812,6 +2812,9 @@ int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id);
>> * Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before
>> * PMD port start callback function is invoked.
>> *
>> + * All device queues (except form deferred start queues) status should be
>> + * `RTE_ETH_QUEUE_STATE_STARTED` after start.
>> + *
>> * On success, all basic functions exported by the Ethernet API (link status,
>> * receive/transmit, and so on) can be invoked.
>> *
>> @@ -2828,6 +2831,8 @@ int rte_eth_dev_start(uint16_t port_id);
>> * Stop an Ethernet device. The device can be restarted with a call to
>> * rte_eth_dev_start()
>> *
>> + * All device queues status should be `RTE_ETH_QUEUE_STATE_STOPPED` after stop.
>> + *
>> * @param port_id
>> * The port identifier of the Ethernet device.
>> * @return
>> --
>> 2.34.1
>>
>
> The rest lgtm.
>
>
Thanks for review, will send a new version soon
@@ -65,6 +65,7 @@ source_file_deps = {
'test_efd_perf.c': ['efd', 'hash'],
'test_errno.c': [],
'test_ethdev_link.c': ['ethdev'],
+ 'test_ethdev_api.c': ['ethdev'],
'test_event_crypto_adapter.c': ['cryptodev', 'eventdev', 'bus_vdev'],
'test_event_eth_rx_adapter.c': ['ethdev', 'eventdev', 'bus_vdev'],
'test_event_eth_tx_adapter.c': ['bus_vdev', 'ethdev', 'net_ring', 'eventdev'],
new file mode 100644
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright (C) 2023, Advanced Micro Devices, Inc.
+ */
+
+#include <rte_log.h>
+#include <rte_ethdev.h>
+
+#include <rte_test.h>
+#include "test.h"
+
+#define NUM_RXQ 2
+#define NUM_TXQ 2
+#define NUM_RXD 512
+#define NUM_TXD 512
+#define NUM_MBUF 1024
+#define MBUF_CACHE_SIZE 256
+
+static int32_t
+ethdev_api_queue_status(void)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxq_info rx_qinfo;
+ struct rte_eth_txq_info tx_qinfo;
+ struct rte_mempool *mbuf_pool;
+ struct rte_eth_conf eth_conf;
+ uint16_t port_id;
+ int ret;
+
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUF, MBUF_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ memset(ð_conf, 0, sizeof(eth_conf));
+ ret = rte_eth_dev_configure(port_id, NUM_RXQ, NUM_TXQ, ð_conf);
+ TEST_ASSERT(ret == 0,
+ "Port(%u) failed to configure.\n", port_id);
+
+ /* RxQ setup */
+ for (uint16_t queue_id = 0; queue_id < NUM_RXQ; queue_id++) {
+ ret = rte_eth_rx_queue_setup(port_id, queue_id, NUM_RXD,
+ rte_socket_id(), NULL, mbuf_pool);
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to setup RxQ.\n",
+ port_id, queue_id);
+ }
+
+ /* TxQ setup */
+ for (uint16_t queue_id = 0; queue_id < NUM_TXQ; queue_id++) {
+ ret = rte_eth_tx_queue_setup(port_id, queue_id, NUM_TXD,
+ rte_socket_id(), NULL);
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to setup TxQ.\n",
+ port_id, queue_id);
+ }
+
+ ret = rte_eth_dev_info_get(port_id, &dev_info);
+ TEST_ASSERT(ret == 0,
+ "Port(%u) failed to get dev info.\n", port_id);
+
+ /* Initial RxQ */
+ for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
+ ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
+ if (ret == -ENOTSUP)
+ continue;
+
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to get RxQ info.\n",
+ port_id, queue_id);
+
+ TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
+ "Wrong initial Rx queue(%u) state(%d)\n",
+ queue_id, rx_qinfo.queue_state);
+ }
+
+ /* Initial TxQ */
+ for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
+ ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
+ if (ret == -ENOTSUP)
+ continue;
+
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to get TxQ info.\n",
+ port_id, queue_id);
+
+ TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
+ "Wrong initial Tx queue(%u) state(%d)\n",
+ queue_id, tx_qinfo.queue_state);
+ }
+
+
+ ret = rte_eth_dev_start(port_id);
+ TEST_ASSERT(ret == 0,
+ "Port(%u) failed to start.\n", port_id);
+
+ /* Started RxQ */
+ for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
+ ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
+ if (ret == -ENOTSUP)
+ continue;
+
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to get RxQ info.\n",
+ port_id, queue_id);
+
+ TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STARTED,
+ "Wrong started Rx queue(%u) state(%d)\n",
+ queue_id, rx_qinfo.queue_state);
+ }
+
+ /* Started TxQ */
+ for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
+ ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
+ if (ret == -ENOTSUP)
+ continue;
+
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to get TxQ info.\n",
+ port_id, queue_id);
+
+ TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STARTED,
+ "Wrong started Tx queue(%u) state(%d)\n",
+ queue_id, tx_qinfo.queue_state);
+ }
+
+
+ ret = rte_eth_dev_stop(port_id);
+ TEST_ASSERT(ret == 0,
+ "Port(%u) failed to stop.\n", port_id);
+
+ /* Stopped RxQ */
+ for (uint16_t queue_id = 0; queue_id < dev_info.nb_rx_queues; queue_id++) {
+ ret = rte_eth_rx_queue_info_get(port_id, queue_id, &rx_qinfo);
+ if (ret == -ENOTSUP)
+ continue;
+
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to get RxQ info.\n",
+ port_id, queue_id);
+
+ TEST_ASSERT(rx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
+ "Wrong stopped Rx queue(%u) state(%d)\n",
+ queue_id, rx_qinfo.queue_state);
+ }
+
+ /* Stopped TxQ */
+ for (uint16_t queue_id = 0; queue_id < dev_info.nb_tx_queues; queue_id++) {
+ ret = rte_eth_tx_queue_info_get(port_id, queue_id, &tx_qinfo);
+ if (ret == -ENOTSUP)
+ continue;
+
+ TEST_ASSERT(ret == 0,
+ "Port(%u), queue(%u) failed to get TxQ info.\n",
+ port_id, queue_id);
+
+ TEST_ASSERT(tx_qinfo.queue_state == RTE_ETH_QUEUE_STATE_STOPPED,
+ "Wrong stopped Tx queue(%u) state(%d)\n",
+ queue_id, tx_qinfo.queue_state);
+ }
+ }
+
+ return TEST_SUCCESS;
+}
+
+static struct unit_test_suite ethdev_api_testsuite = {
+ .suite_name = "ethdev API tests",
+ .setup = NULL,
+ .teardown = NULL,
+ .unit_test_cases = {
+ TEST_CASE(ethdev_api_queue_status),
+ /* TODO: Add deferred_start queue status test */
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
+static int
+test_ethdev_api(void)
+{
+ rte_log_set_global_level(RTE_LOG_DEBUG);
+ rte_log_set_level(RTE_LOGTYPE_EAL, RTE_LOG_DEBUG);
+
+ return unit_test_suite_runner(ðdev_api_testsuite);
+}
+
+REGISTER_TEST_COMMAND(ethdev_api, test_ethdev_api);
@@ -2812,6 +2812,9 @@ int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id);
* Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before
* PMD port start callback function is invoked.
*
+ * All device queues (except form deferred start queues) status should be
+ * `RTE_ETH_QUEUE_STATE_STARTED` after start.
+ *
* On success, all basic functions exported by the Ethernet API (link status,
* receive/transmit, and so on) can be invoked.
*
@@ -2828,6 +2831,8 @@ int rte_eth_dev_start(uint16_t port_id);
* Stop an Ethernet device. The device can be restarted with a call to
* rte_eth_dev_start()
*
+ * All device queues status should be `RTE_ETH_QUEUE_STATE_STOPPED` after stop.
+ *
* @param port_id
* The port identifier of the Ethernet device.
* @return