[v7,2/9] ethdev: support setting and querying RSS algorithm

Message ID 20231028014611.4086500-3-haijie1@huawei.com (mailing list archive)
State Changes Requested, archived
Delegated to: Ferruh Yigit
Headers
Series support setting and querying RSS algorithms |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Jie Hai Oct. 28, 2023, 1:46 a.m. UTC
  Currently, rte_eth_rss_conf supports configuring and querying
RSS hash functions, rss key and it's length, but not RSS hash
algorithm.

The structure ``rte_eth_dev_info`` is extended by adding a new
field "rss_algo_capa". Drivers are responsible for reporting this
capa and configurations of RSS hash algorithm can be verified based
on the capability. The default value of "rss_algo_capa" is
RTE_ETH_HASH_ALGO_CAPA_MASK(DEFAULT) if drivers do not report it.

The structure ``rte_eth_rss_conf`` is extended by adding a new
field "algorithm". This represents the RSS algorithms to apply.
If the value of "algorithm" used for configuration is a gibberish
value, drivers should report the error.

To check whether the drivers report valid "algorithm", it is set
to default value before querying in rte_eth_dev_rss_hash_conf_get().

Signed-off-by: Jie Hai <haijie1@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
---
 doc/guides/rel_notes/release_23_11.rst |  5 ++++
 lib/ethdev/rte_ethdev.c                | 26 ++++++++++++++++++++
 lib/ethdev/rte_ethdev.h                | 33 +++++++++++++++++++++++++-
 lib/ethdev/rte_flow.c                  |  1 -
 lib/ethdev/rte_flow.h                  | 26 ++------------------
 5 files changed, 65 insertions(+), 26 deletions(-)
  

Comments

lihuisong (C) Oct. 28, 2023, 3:01 a.m. UTC | #1
With belows to changes,
Acked-by: Huisong Li <lihuisong@huawei.com>


在 2023/10/28 9:46, Jie Hai 写道:
> Currently, rte_eth_rss_conf supports configuring and querying
> RSS hash functions, rss key and it's length, but not RSS hash
> algorithm.
>
> The structure ``rte_eth_dev_info`` is extended by adding a new
> field "rss_algo_capa". Drivers are responsible for reporting this
> capa and configurations of RSS hash algorithm can be verified based
> on the capability. The default value of "rss_algo_capa" is
> RTE_ETH_HASH_ALGO_CAPA_MASK(DEFAULT) if drivers do not report it.
>
> The structure ``rte_eth_rss_conf`` is extended by adding a new
> field "algorithm". This represents the RSS algorithms to apply.
> If the value of "algorithm" used for configuration is a gibberish
> value, drivers should report the error.
>
> To check whether the drivers report valid "algorithm", it is set
> to default value before querying in rte_eth_dev_rss_hash_conf_get().
>
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
> ---
>   doc/guides/rel_notes/release_23_11.rst |  5 ++++
>   lib/ethdev/rte_ethdev.c                | 26 ++++++++++++++++++++
>   lib/ethdev/rte_ethdev.h                | 33 +++++++++++++++++++++++++-
>   lib/ethdev/rte_flow.c                  |  1 -
>   lib/ethdev/rte_flow.h                  | 26 ++------------------
>   5 files changed, 65 insertions(+), 26 deletions(-)
>
> diff --git a/doc/guides/rel_notes/release_23_11.rst b/doc/guides/rel_notes/release_23_11.rst
> index 0a6fc76a9d02..a35d729d2cc7 100644
> --- a/doc/guides/rel_notes/release_23_11.rst
> +++ b/doc/guides/rel_notes/release_23_11.rst
> @@ -360,6 +360,11 @@ ABI Changes
>   * security: struct ``rte_security_ipsec_sa_options`` was updated
>     due to inline out-of-place feature addition.
>   
> +* ethdev: Added "rss_algo_capa" field to ``rte_eth_dev_info`` structure for
> +* reporting RSS hash algorithm capability.
> +
> +* ethdev: Added "algorithm" field to ``rte_eth_rss_conf`` structure for RSS
> +  hash algorithm.
>   
>   Known Issues
>   ------------
> diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
> index 9dabcb5ae28e..90bfbf14d1f7 100644
> --- a/lib/ethdev/rte_ethdev.c
> +++ b/lib/ethdev/rte_ethdev.c
> @@ -1269,6 +1269,7 @@ int
>   rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   		      const struct rte_eth_conf *dev_conf)
>   {
> +	enum rte_eth_hash_function algorithm;
>   	struct rte_eth_dev *dev;
>   	struct rte_eth_dev_info dev_info;
>   	struct rte_eth_conf orig_conf;
> @@ -1500,6 +1501,18 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
>   		goto rollback;
>   	}
>   
> +	algorithm = dev_conf->rx_adv_conf.rss_conf.algorithm;
> +	if ((dev_info.rss_algo_capa &
> +	     RTE_ETH_HASH_ALGO_TO_CAPA(algorithm)) == 0) {
need to check the algorithm.
its value should be in range of 0 to 31.
> +		RTE_ETHDEV_LOG(ERR,
> +			"Ethdev port_id=%u config unsupported RSS hash algorithm: %u "
> +			"with rss_algo_capa: %x\n",
It seems that this log is not friendly to user.
Configured RSS hash algorithm (%u) is not in the algorithm capability ().
Anything ok like that.

%x --> 0x%" PRIx32 "
> +			port_id, algorithm,
> +			dev_info.rss_algo_capa);
> +		ret = -EINVAL;
> +		goto rollback;
> +	}
> +
>   	/*
>   	 * Setup new number of Rx/Tx queues and reconfigure device.
>   	 */
> @@ -3757,6 +3770,7 @@ rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
>   	dev_info->min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN -
>   		RTE_ETHER_CRC_LEN;
>   	dev_info->max_mtu = UINT16_MAX;
> +	dev_info->rss_algo_capa = RTE_ETH_HASH_ALGO_CAPA_MASK(DEFAULT);
>   
>   	if (*dev->dev_ops->dev_infos_get == NULL)
>   		return -ENOTSUP;
> @@ -4698,6 +4712,16 @@ rte_eth_dev_rss_hash_update(uint16_t port_id,
>   		return -ENOTSUP;
>   	}
>   
> +	if ((dev_info.rss_algo_capa &
> +	     RTE_ETH_HASH_ALGO_TO_CAPA(rss_conf->algorithm)) == 0) {
> +		RTE_ETHDEV_LOG(ERR,
> +			"Ethdev port_id=%u config unsupported RSS hash algorithm: %u "
> +			"with rss_algo_capa: %x\n",
> +			port_id, rss_conf->algorithm,
> +			dev_info.rss_algo_capa);
> +		return -EINVAL;
> +	}
> +
>   	if (*dev->dev_ops->rss_hash_update == NULL)
>   		return -ENOTSUP;
>   	ret = eth_err(port_id, (*dev->dev_ops->rss_hash_update)(dev,
> @@ -4725,6 +4749,8 @@ rte_eth_dev_rss_hash_conf_get(uint16_t port_id,
>   		return -EINVAL;
>   	}
>   
> +	rss_conf->algorithm = RTE_ETH_HASH_FUNCTION_DEFAULT;
> +
>   	if (*dev->dev_ops->rss_hash_conf_get == NULL)
>   		return -ENOTSUP;
>   	ret = eth_err(port_id, (*dev->dev_ops->rss_hash_conf_get)(dev,
> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
> index 37fd5afef48a..2f639edd8218 100644
> --- a/lib/ethdev/rte_ethdev.h
> +++ b/lib/ethdev/rte_ethdev.h
> @@ -445,6 +445,33 @@ struct rte_vlan_filter_conf {
>   	uint64_t ids[64];
>   };
>   
> +/**
> + * Hash function types.
> + */
> +enum rte_eth_hash_function {
> +	/** DEFAULT means driver decides which hash algorithm to pick. */
> +	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
> +	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
> +	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
> +	/**
> +	 * Symmetric Toeplitz: src, dst will be replaced by
> +	 * xor(src, dst). For the case with src/dst only,
> +	 * src or dst address will xor with zero pair.
> +	 */
> +	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
> +	/**
> +	 * Symmetric Toeplitz: L3 and L4 fields are sorted prior to
> +	 * the hash function.
> +	 *  If src_ip > dst_ip, swap src_ip and dst_ip.
> +	 *  If src_port > dst_port, swap src_port and dst_port.
> +	 */
> +	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT,
> +	RTE_ETH_HASH_FUNCTION_MAX,
> +};
> +
> +#define RTE_ETH_HASH_ALGO_TO_CAPA(x) RTE_BIT32(x)
> +#define RTE_ETH_HASH_ALGO_CAPA_MASK(x) RTE_BIT32(RTE_ETH_HASH_FUNCTION_ ## x)
> +
>   /**
>    * A structure used to configure the Receive Side Scaling (RSS) feature
>    * of an Ethernet port.
> @@ -469,6 +496,7 @@ struct rte_eth_rss_conf {
>   	 * which RSS hashing is to be applied.
>   	 */
>   	uint64_t rss_hf;
> +	enum rte_eth_hash_function algorithm;	/**< Hash algorithm. */
>   };
>   
>   /*
> @@ -1783,7 +1811,10 @@ struct rte_eth_dev_info {
>   	/** Supported error handling mode. */
>   	enum rte_eth_err_handle_mode err_handle_mode;
>   
> -	uint64_t reserved_64s[2]; /**< Reserved for future fields */
> +	/** RSS hash algorithms capabilities */
> +	uint32_t rss_algo_capa;
Please move this new field to "hash_key_size" and 
"flow_type_rss_offloads" in this struct.
Because this version allows ABI break.
> +
> +	uint32_t reserved_32s[3]; /**< Reserved for future fields */
>   	void *reserved_ptrs[2];   /**< Reserved for future fields */
>   };
>   
> diff --git a/lib/ethdev/rte_flow.c b/lib/ethdev/rte_flow.c
> index 3a67f1aaba9d..c13a2a391c37 100644
> --- a/lib/ethdev/rte_flow.c
> +++ b/lib/ethdev/rte_flow.c
> @@ -13,7 +13,6 @@
>   #include <rte_branch_prediction.h>
>   #include <rte_string_fns.h>
>   #include <rte_mbuf_dyn.h>
> -#include "rte_ethdev.h"
>   #include "rte_flow_driver.h"
>   #include "rte_flow.h"
>   
> diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
> index 25f1dffd1f30..c94f553ae06f 100644
> --- a/lib/ethdev/rte_flow.h
> +++ b/lib/ethdev/rte_flow.h
> @@ -40,6 +40,8 @@
>   #include <rte_macsec.h>
>   #include <rte_ib.h>
>   
> +#include "rte_ethdev.h"
> +
>   #ifdef __cplusplus
>   extern "C" {
>   #endif
> @@ -3222,30 +3224,6 @@ struct rte_flow_query_count {
>   	uint64_t bytes; /**< Number of bytes through this rule [out]. */
>   };
>   
> -/**
> - * Hash function types.
> - */
> -enum rte_eth_hash_function {
> -	/** DEFAULT means driver decides which hash algorithm to pick. */
> -	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
> -	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
> -	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
> -	/**
> -	 * Symmetric Toeplitz: src, dst will be replaced by
> -	 * xor(src, dst). For the case with src/dst only,
> -	 * src or dst address will xor with zero pair.
> -	 */
> -	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
> -	/**
> -	 * Symmetric Toeplitz: L3 and L4 fields are sorted prior to
> -	 * the hash function.
> -	 *  If src_ip > dst_ip, swap src_ip and dst_ip.
> -	 *  If src_port > dst_port, swap src_port and dst_port.
> -	 */
> -	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT,
> -	RTE_ETH_HASH_FUNCTION_MAX,
> -};
> -
>   /**
>    * RTE_FLOW_ACTION_TYPE_RSS
>    *
  
Ferruh Yigit Nov. 1, 2023, 12:55 p.m. UTC | #2
On 10/28/2023 4:01 AM, lihuisong (C) wrote:
> With belows to changes,
> Acked-by: Huisong Li <lihuisong@huawei.com>
> 
> 
> 在 2023/10/28 9:46, Jie Hai 写道:
>> Currently, rte_eth_rss_conf supports configuring and querying
>> RSS hash functions, rss key and it's length, but not RSS hash
>> algorithm.
>>
>> The structure ``rte_eth_dev_info`` is extended by adding a new
>> field "rss_algo_capa". Drivers are responsible for reporting this
>> capa and configurations of RSS hash algorithm can be verified based
>> on the capability. The default value of "rss_algo_capa" is
>> RTE_ETH_HASH_ALGO_CAPA_MASK(DEFAULT) if drivers do not report it.
>>
>> The structure ``rte_eth_rss_conf`` is extended by adding a new
>> field "algorithm". This represents the RSS algorithms to apply.
>> If the value of "algorithm" used for configuration is a gibberish
>> value, drivers should report the error.
>>
>> To check whether the drivers report valid "algorithm", it is set
>> to default value before querying in rte_eth_dev_rss_hash_conf_get().
>>
>> Signed-off-by: Jie Hai <haijie1@huawei.com>
>> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
>> ---
>>   doc/guides/rel_notes/release_23_11.rst |  5 ++++
>>   lib/ethdev/rte_ethdev.c                | 26 ++++++++++++++++++++
>>   lib/ethdev/rte_ethdev.h                | 33 +++++++++++++++++++++++++-
>>   lib/ethdev/rte_flow.c                  |  1 -
>>   lib/ethdev/rte_flow.h                  | 26 ++------------------
>>   5 files changed, 65 insertions(+), 26 deletions(-)
>>
>> diff --git a/doc/guides/rel_notes/release_23_11.rst
>> b/doc/guides/rel_notes/release_23_11.rst
>> index 0a6fc76a9d02..a35d729d2cc7 100644
>> --- a/doc/guides/rel_notes/release_23_11.rst
>> +++ b/doc/guides/rel_notes/release_23_11.rst
>> @@ -360,6 +360,11 @@ ABI Changes
>>   * security: struct ``rte_security_ipsec_sa_options`` was updated
>>     due to inline out-of-place feature addition.
>>   +* ethdev: Added "rss_algo_capa" field to ``rte_eth_dev_info``
>> structure for
>> +* reporting RSS hash algorithm capability.
>> +
>> +* ethdev: Added "algorithm" field to ``rte_eth_rss_conf`` structure
>> for RSS
>> +  hash algorithm.
>>     Known Issues
>>   ------------
>> diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
>> index 9dabcb5ae28e..90bfbf14d1f7 100644
>> --- a/lib/ethdev/rte_ethdev.c
>> +++ b/lib/ethdev/rte_ethdev.c
>> @@ -1269,6 +1269,7 @@ int
>>   rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t
>> nb_tx_q,
>>                 const struct rte_eth_conf *dev_conf)
>>   {
>> +    enum rte_eth_hash_function algorithm;
>>       struct rte_eth_dev *dev;
>>       struct rte_eth_dev_info dev_info;
>>       struct rte_eth_conf orig_conf;
>> @@ -1500,6 +1501,18 @@ rte_eth_dev_configure(uint16_t port_id,
>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>           goto rollback;
>>       }
>>   +    algorithm = dev_conf->rx_adv_conf.rss_conf.algorithm;
>> +    if ((dev_info.rss_algo_capa &
>> +         RTE_ETH_HASH_ALGO_TO_CAPA(algorithm)) == 0) {
> need to check the algorithm.
> its value should be in range of 0 to 31.
>> +        RTE_ETHDEV_LOG(ERR,
>> +            "Ethdev port_id=%u config unsupported RSS hash algorithm:
>> %u "
>> +            "with rss_algo_capa: %x\n",
> It seems that this log is not friendly to user.
> Configured RSS hash algorithm (%u) is not in the algorithm capability ().
> Anything ok like that.
> 
> %x --> 0x%" PRIx32 "
>> +            port_id, algorithm,
>> +            dev_info.rss_algo_capa);
>> +        ret = -EINVAL;
>> +        goto rollback;
>> +    }
>> +
>>       /*
>>        * Setup new number of Rx/Tx queues and reconfigure device.
>>        */
>> @@ -3757,6 +3770,7 @@ rte_eth_dev_info_get(uint16_t port_id, struct
>> rte_eth_dev_info *dev_info)
>>       dev_info->min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN -
>>           RTE_ETHER_CRC_LEN;
>>       dev_info->max_mtu = UINT16_MAX;
>> +    dev_info->rss_algo_capa = RTE_ETH_HASH_ALGO_CAPA_MASK(DEFAULT);
>>         if (*dev->dev_ops->dev_infos_get == NULL)
>>           return -ENOTSUP;
>> @@ -4698,6 +4712,16 @@ rte_eth_dev_rss_hash_update(uint16_t port_id,
>>           return -ENOTSUP;
>>       }
>>   +    if ((dev_info.rss_algo_capa &
>> +         RTE_ETH_HASH_ALGO_TO_CAPA(rss_conf->algorithm)) == 0) {
>> +        RTE_ETHDEV_LOG(ERR,
>> +            "Ethdev port_id=%u config unsupported RSS hash algorithm:
>> %u "
>> +            "with rss_algo_capa: %x\n",
>> +            port_id, rss_conf->algorithm,
>> +            dev_info.rss_algo_capa);
>> +        return -EINVAL;
>> +    }
>> +
>>       if (*dev->dev_ops->rss_hash_update == NULL)
>>           return -ENOTSUP;
>>       ret = eth_err(port_id, (*dev->dev_ops->rss_hash_update)(dev,
>> @@ -4725,6 +4749,8 @@ rte_eth_dev_rss_hash_conf_get(uint16_t port_id,
>>           return -EINVAL;
>>       }
>>   +    rss_conf->algorithm = RTE_ETH_HASH_FUNCTION_DEFAULT;
>> +
>>       if (*dev->dev_ops->rss_hash_conf_get == NULL)
>>           return -ENOTSUP;
>>       ret = eth_err(port_id, (*dev->dev_ops->rss_hash_conf_get)(dev,
>> diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
>> index 37fd5afef48a..2f639edd8218 100644
>> --- a/lib/ethdev/rte_ethdev.h
>> +++ b/lib/ethdev/rte_ethdev.h
>> @@ -445,6 +445,33 @@ struct rte_vlan_filter_conf {
>>       uint64_t ids[64];
>>   };
>>   +/**
>> + * Hash function types.
>> + */
>> +enum rte_eth_hash_function {
>> +    /** DEFAULT means driver decides which hash algorithm to pick. */
>> +    RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
>> +    RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
>> +    RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
>> +    /**
>> +     * Symmetric Toeplitz: src, dst will be replaced by
>> +     * xor(src, dst). For the case with src/dst only,
>> +     * src or dst address will xor with zero pair.
>> +     */
>> +    RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
>> +    /**
>> +     * Symmetric Toeplitz: L3 and L4 fields are sorted prior to
>> +     * the hash function.
>> +     *  If src_ip > dst_ip, swap src_ip and dst_ip.
>> +     *  If src_port > dst_port, swap src_port and dst_port.
>> +     */
>> +    RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT,
>> +    RTE_ETH_HASH_FUNCTION_MAX,
>> +};
>> +
>> +#define RTE_ETH_HASH_ALGO_TO_CAPA(x) RTE_BIT32(x)
>> +#define RTE_ETH_HASH_ALGO_CAPA_MASK(x)
>> RTE_BIT32(RTE_ETH_HASH_FUNCTION_ ## x)
>> +
>>   /**
>>    * A structure used to configure the Receive Side Scaling (RSS) feature
>>    * of an Ethernet port.
>> @@ -469,6 +496,7 @@ struct rte_eth_rss_conf {
>>        * which RSS hashing is to be applied.
>>        */
>>       uint64_t rss_hf;
>> +    enum rte_eth_hash_function algorithm;    /**< Hash algorithm. */
>>   };
>>     /*
>> @@ -1783,7 +1811,10 @@ struct rte_eth_dev_info {
>>       /** Supported error handling mode. */
>>       enum rte_eth_err_handle_mode err_handle_mode;
>>   -    uint64_t reserved_64s[2]; /**< Reserved for future fields */
>> +    /** RSS hash algorithms capabilities */
>> +    uint32_t rss_algo_capa;
>>
> Please move this new field to "hash_key_size" and
> "flow_type_rss_offloads" in this struct.
> Because this version allows ABI break.
>

Technically, even LTS release is an ABI break release, an ABI break
should be discussed, approved and documented in the deprecation.rst in
advance.

For this patch, design evolved to update "struct rte_eth_dev_info" as
discussions go on, so I think we can make an exception,


But I would like to clarify that we shouldn't just break the ABI since
it is an LTS release.

A way to prevent exception happening in the patch is conclude design and
document ABI breakage *before* LTS release cycle start.


>> +
>> +    uint32_t reserved_32s[3]; /**< Reserved for future fields */
>>       void *reserved_ptrs[2];   /**< Reserved for future fields */
>>   };
>>   diff --git a/lib/ethdev/rte_flow.c b/lib/ethdev/rte_flow.c
>> index 3a67f1aaba9d..c13a2a391c37 100644
>> --- a/lib/ethdev/rte_flow.c
>> +++ b/lib/ethdev/rte_flow.c
>> @@ -13,7 +13,6 @@
>>   #include <rte_branch_prediction.h>
>>   #include <rte_string_fns.h>
>>   #include <rte_mbuf_dyn.h>
>> -#include "rte_ethdev.h"
>>   #include "rte_flow_driver.h"
>>   #include "rte_flow.h"
>>   diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
>> index 25f1dffd1f30..c94f553ae06f 100644
>> --- a/lib/ethdev/rte_flow.h
>> +++ b/lib/ethdev/rte_flow.h
>> @@ -40,6 +40,8 @@
>>   #include <rte_macsec.h>
>>   #include <rte_ib.h>
>>   +#include "rte_ethdev.h"
>> +
>>   #ifdef __cplusplus
>>   extern "C" {
>>   #endif
>> @@ -3222,30 +3224,6 @@ struct rte_flow_query_count {
>>       uint64_t bytes; /**< Number of bytes through this rule [out]. */
>>   };
>>   -/**
>> - * Hash function types.
>> - */
>> -enum rte_eth_hash_function {
>> -    /** DEFAULT means driver decides which hash algorithm to pick. */
>> -    RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
>> -    RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
>> -    RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
>> -    /**
>> -     * Symmetric Toeplitz: src, dst will be replaced by
>> -     * xor(src, dst). For the case with src/dst only,
>> -     * src or dst address will xor with zero pair.
>> -     */
>> -    RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
>> -    /**
>> -     * Symmetric Toeplitz: L3 and L4 fields are sorted prior to
>> -     * the hash function.
>> -     *  If src_ip > dst_ip, swap src_ip and dst_ip.
>> -     *  If src_port > dst_port, swap src_port and dst_port.
>> -     */
>> -    RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT,
>> -    RTE_ETH_HASH_FUNCTION_MAX,
>> -};
>> -
>>   /**
>>    * RTE_FLOW_ACTION_TYPE_RSS
>>    *
  

Patch

diff --git a/doc/guides/rel_notes/release_23_11.rst b/doc/guides/rel_notes/release_23_11.rst
index 0a6fc76a9d02..a35d729d2cc7 100644
--- a/doc/guides/rel_notes/release_23_11.rst
+++ b/doc/guides/rel_notes/release_23_11.rst
@@ -360,6 +360,11 @@  ABI Changes
 * security: struct ``rte_security_ipsec_sa_options`` was updated
   due to inline out-of-place feature addition.
 
+* ethdev: Added "rss_algo_capa" field to ``rte_eth_dev_info`` structure for
+* reporting RSS hash algorithm capability.
+
+* ethdev: Added "algorithm" field to ``rte_eth_rss_conf`` structure for RSS
+  hash algorithm.
 
 Known Issues
 ------------
diff --git a/lib/ethdev/rte_ethdev.c b/lib/ethdev/rte_ethdev.c
index 9dabcb5ae28e..90bfbf14d1f7 100644
--- a/lib/ethdev/rte_ethdev.c
+++ b/lib/ethdev/rte_ethdev.c
@@ -1269,6 +1269,7 @@  int
 rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 		      const struct rte_eth_conf *dev_conf)
 {
+	enum rte_eth_hash_function algorithm;
 	struct rte_eth_dev *dev;
 	struct rte_eth_dev_info dev_info;
 	struct rte_eth_conf orig_conf;
@@ -1500,6 +1501,18 @@  rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 		goto rollback;
 	}
 
+	algorithm = dev_conf->rx_adv_conf.rss_conf.algorithm;
+	if ((dev_info.rss_algo_capa &
+	     RTE_ETH_HASH_ALGO_TO_CAPA(algorithm)) == 0) {
+		RTE_ETHDEV_LOG(ERR,
+			"Ethdev port_id=%u config unsupported RSS hash algorithm: %u "
+			"with rss_algo_capa: %x\n",
+			port_id, algorithm,
+			dev_info.rss_algo_capa);
+		ret = -EINVAL;
+		goto rollback;
+	}
+
 	/*
 	 * Setup new number of Rx/Tx queues and reconfigure device.
 	 */
@@ -3757,6 +3770,7 @@  rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
 	dev_info->min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN -
 		RTE_ETHER_CRC_LEN;
 	dev_info->max_mtu = UINT16_MAX;
+	dev_info->rss_algo_capa = RTE_ETH_HASH_ALGO_CAPA_MASK(DEFAULT);
 
 	if (*dev->dev_ops->dev_infos_get == NULL)
 		return -ENOTSUP;
@@ -4698,6 +4712,16 @@  rte_eth_dev_rss_hash_update(uint16_t port_id,
 		return -ENOTSUP;
 	}
 
+	if ((dev_info.rss_algo_capa &
+	     RTE_ETH_HASH_ALGO_TO_CAPA(rss_conf->algorithm)) == 0) {
+		RTE_ETHDEV_LOG(ERR,
+			"Ethdev port_id=%u config unsupported RSS hash algorithm: %u "
+			"with rss_algo_capa: %x\n",
+			port_id, rss_conf->algorithm,
+			dev_info.rss_algo_capa);
+		return -EINVAL;
+	}
+
 	if (*dev->dev_ops->rss_hash_update == NULL)
 		return -ENOTSUP;
 	ret = eth_err(port_id, (*dev->dev_ops->rss_hash_update)(dev,
@@ -4725,6 +4749,8 @@  rte_eth_dev_rss_hash_conf_get(uint16_t port_id,
 		return -EINVAL;
 	}
 
+	rss_conf->algorithm = RTE_ETH_HASH_FUNCTION_DEFAULT;
+
 	if (*dev->dev_ops->rss_hash_conf_get == NULL)
 		return -ENOTSUP;
 	ret = eth_err(port_id, (*dev->dev_ops->rss_hash_conf_get)(dev,
diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h
index 37fd5afef48a..2f639edd8218 100644
--- a/lib/ethdev/rte_ethdev.h
+++ b/lib/ethdev/rte_ethdev.h
@@ -445,6 +445,33 @@  struct rte_vlan_filter_conf {
 	uint64_t ids[64];
 };
 
+/**
+ * Hash function types.
+ */
+enum rte_eth_hash_function {
+	/** DEFAULT means driver decides which hash algorithm to pick. */
+	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
+	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
+	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
+	/**
+	 * Symmetric Toeplitz: src, dst will be replaced by
+	 * xor(src, dst). For the case with src/dst only,
+	 * src or dst address will xor with zero pair.
+	 */
+	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
+	/**
+	 * Symmetric Toeplitz: L3 and L4 fields are sorted prior to
+	 * the hash function.
+	 *  If src_ip > dst_ip, swap src_ip and dst_ip.
+	 *  If src_port > dst_port, swap src_port and dst_port.
+	 */
+	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT,
+	RTE_ETH_HASH_FUNCTION_MAX,
+};
+
+#define RTE_ETH_HASH_ALGO_TO_CAPA(x) RTE_BIT32(x)
+#define RTE_ETH_HASH_ALGO_CAPA_MASK(x) RTE_BIT32(RTE_ETH_HASH_FUNCTION_ ## x)
+
 /**
  * A structure used to configure the Receive Side Scaling (RSS) feature
  * of an Ethernet port.
@@ -469,6 +496,7 @@  struct rte_eth_rss_conf {
 	 * which RSS hashing is to be applied.
 	 */
 	uint64_t rss_hf;
+	enum rte_eth_hash_function algorithm;	/**< Hash algorithm. */
 };
 
 /*
@@ -1783,7 +1811,10 @@  struct rte_eth_dev_info {
 	/** Supported error handling mode. */
 	enum rte_eth_err_handle_mode err_handle_mode;
 
-	uint64_t reserved_64s[2]; /**< Reserved for future fields */
+	/** RSS hash algorithms capabilities */
+	uint32_t rss_algo_capa;
+
+	uint32_t reserved_32s[3]; /**< Reserved for future fields */
 	void *reserved_ptrs[2];   /**< Reserved for future fields */
 };
 
diff --git a/lib/ethdev/rte_flow.c b/lib/ethdev/rte_flow.c
index 3a67f1aaba9d..c13a2a391c37 100644
--- a/lib/ethdev/rte_flow.c
+++ b/lib/ethdev/rte_flow.c
@@ -13,7 +13,6 @@ 
 #include <rte_branch_prediction.h>
 #include <rte_string_fns.h>
 #include <rte_mbuf_dyn.h>
-#include "rte_ethdev.h"
 #include "rte_flow_driver.h"
 #include "rte_flow.h"
 
diff --git a/lib/ethdev/rte_flow.h b/lib/ethdev/rte_flow.h
index 25f1dffd1f30..c94f553ae06f 100644
--- a/lib/ethdev/rte_flow.h
+++ b/lib/ethdev/rte_flow.h
@@ -40,6 +40,8 @@ 
 #include <rte_macsec.h>
 #include <rte_ib.h>
 
+#include "rte_ethdev.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -3222,30 +3224,6 @@  struct rte_flow_query_count {
 	uint64_t bytes; /**< Number of bytes through this rule [out]. */
 };
 
-/**
- * Hash function types.
- */
-enum rte_eth_hash_function {
-	/** DEFAULT means driver decides which hash algorithm to pick. */
-	RTE_ETH_HASH_FUNCTION_DEFAULT = 0,
-	RTE_ETH_HASH_FUNCTION_TOEPLITZ, /**< Toeplitz */
-	RTE_ETH_HASH_FUNCTION_SIMPLE_XOR, /**< Simple XOR */
-	/**
-	 * Symmetric Toeplitz: src, dst will be replaced by
-	 * xor(src, dst). For the case with src/dst only,
-	 * src or dst address will xor with zero pair.
-	 */
-	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ,
-	/**
-	 * Symmetric Toeplitz: L3 and L4 fields are sorted prior to
-	 * the hash function.
-	 *  If src_ip > dst_ip, swap src_ip and dst_ip.
-	 *  If src_port > dst_port, swap src_port and dst_port.
-	 */
-	RTE_ETH_HASH_FUNCTION_SYMMETRIC_TOEPLITZ_SORT,
-	RTE_ETH_HASH_FUNCTION_MAX,
-};
-
 /**
  * RTE_FLOW_ACTION_TYPE_RSS
  *