diff mbox series

[v2,08/25] net/axgbe: fix the SFP codes check for DAC cables

Message ID 20240507124305.2318-8-venkatkumar.ande@amd.com (mailing list archive)
State New
Delegated to: Ferruh Yigit
Headers
Series [v2,01/25] net/axgbe: fix mdio access for non-zero ports and CL45 PHYs |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Venkat Kumar Ande May 7, 2024, 12:42 p.m. UTC 
  The current AXGBE code assumes that offset 6 of EEPROM SFP DAC (passive)
cables is NULL. However, some cables (the 5 meter and 7 meter Molex
passive cables) have non-zero data at offset 6. Fix the logic by moving
the passive cable check above the active checks, so as not to be
improperly identified as an active cable. This will fix the issue for
any passive cable that advertises 1000Base-CX in offset 6.

Without the fix the user will not get link UP for few DAC cables.

Fixes: a5c7273771e8 ("net/axgbe: add phy programming APIs")
Cc: stable@dpdk.org

Signed-off-by: Venkat Kumar Ande <venkatkumar.ande@amd.com>
---
 drivers/net/axgbe/axgbe_phy_impl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/axgbe/axgbe_phy_impl.c b/drivers/net/axgbe/axgbe_phy_impl.c
index 9c2ae7bba0..d4c4a89517 100644
--- a/drivers/net/axgbe/axgbe_phy_impl.c
+++ b/drivers/net/axgbe/axgbe_phy_impl.c
@@ -625,7 +625,10 @@  static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
 	}
 
 	/* Determine the type of SFP */
-	if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_SR)
+	if (phy_data->sfp_cable == AXGBE_SFP_CABLE_PASSIVE &&
+		 axgbe_phy_sfp_bit_rate(sfp_eeprom, AXGBE_SFP_SPEED_10000))
+		phy_data->sfp_base = AXGBE_SFP_BASE_10000_CR;
+	else if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_SR)
 		phy_data->sfp_base = AXGBE_SFP_BASE_10000_SR;
 	else if (sfp_base[AXGBE_SFP_BASE_10GBE_CC] & AXGBE_SFP_BASE_10GBE_CC_LR)
 		phy_data->sfp_base = AXGBE_SFP_BASE_10000_LR;
@@ -642,9 +645,6 @@  static void axgbe_phy_sfp_parse_eeprom(struct axgbe_port *pdata)
 		phy_data->sfp_base = AXGBE_SFP_BASE_1000_CX;
 	else if (sfp_base[AXGBE_SFP_BASE_1GBE_CC] & AXGBE_SFP_BASE_1GBE_CC_T)
 		phy_data->sfp_base = AXGBE_SFP_BASE_1000_T;
-	else if ((phy_data->sfp_cable == AXGBE_SFP_CABLE_PASSIVE) &&
-		 axgbe_phy_sfp_bit_rate(sfp_eeprom, AXGBE_SFP_SPEED_10000))
-		phy_data->sfp_base = AXGBE_SFP_BASE_10000_CR;
 
 	switch (phy_data->sfp_base) {
 	case AXGBE_SFP_BASE_1000_T: