[v3,2/3] test/dma: test vchan reconfiguration

  Reconfigure vchan count and validate if new count is effective.

Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
---
 app/test/test_dmadev_api.c | 63 +++++++++++++++++++++++++++++++++-----
 1 file changed, 55 insertions(+), 8 deletions(-)
  

Hi Gowrishankar,

On 2023/11/3 23:38, Gowrishankar Muthukrishnan wrote:
> Reconfigure vchan count and validate if new count is effective.

I think it mainly due to multi-vchan, should point it out, suggest be: support API with multiple vchan test

Thanks
Chengwen

> 
> Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
> ---
>  app/test/test_dmadev_api.c | 63 +++++++++++++++++++++++++++++++++-----
>  1 file changed, 55 insertions(+), 8 deletions(-)
> 
> diff --git a/app/test/test_dmadev_api.c b/app/test/test_dmadev_api.c
> index da8fddb3ca..aa07d2b359 100644
> --- a/app/test/test_dmadev_api.c
> +++ b/app/test/test_dmadev_api.c
> @@ -260,7 +260,7 @@ test_dma_vchan_setup(void)
>  }
>  
>  static int
> -setup_one_vchan(void)
> +setup_vchan(int nb_vchans)
>  {
>  	struct rte_dma_vchan_conf vchan_conf = { 0 };
>  	struct rte_dma_info dev_info = { 0 };
> @@ -269,13 +269,15 @@ setup_one_vchan(void)
>  
>  	ret = rte_dma_info_get(test_dev_id, &dev_info);
>  	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info, %d", ret);
> -	dev_conf.nb_vchans = 1;
> +	dev_conf.nb_vchans = nb_vchans;
>  	ret = rte_dma_configure(test_dev_id, &dev_conf);
>  	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to configure, %d", ret);
>  	vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM;
>  	vchan_conf.nb_desc = dev_info.min_desc;
> -	ret = rte_dma_vchan_setup(test_dev_id, 0, &vchan_conf);
> -	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup vchan, %d", ret);
> +	for (int i = 0; i < nb_vchans; i++) {
> +		ret = rte_dma_vchan_setup(test_dev_id, i, &vchan_conf);
> +		RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup vchan %d, %d", i, ret);
> +	}
>  
>  	return TEST_SUCCESS;
>  }
> @@ -294,7 +296,7 @@ test_dma_start_stop(void)
>  	RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
>  
>  	/* Setup one vchan for later test */
> -	ret = setup_one_vchan();
> +	ret = setup_vchan(1);
>  	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
>  
>  	ret = rte_dma_start(test_dev_id);
> @@ -312,6 +314,50 @@ test_dma_start_stop(void)
>  	return TEST_SUCCESS;
>  }
>  
> +static int
> +test_dma_reconfigure(void)
> +{
> +	struct rte_dma_conf dev_conf = { 0 };
> +	struct rte_dma_info dev_info = { 0 };
> +	uint16_t cfg_vchans;
> +	int ret;
> +
> +	ret = rte_dma_info_get(test_dev_id, &dev_info);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info, %d", ret);
> +
> +	/* At least two vchans required for the test */
> +	if (dev_info.max_vchans < 2)
> +		return TEST_SKIPPED;
> +
> +	/* Setup one vchan for later test */
> +	ret = setup_vchan(1);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
> +
> +	ret = rte_dma_start(test_dev_id);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to start, %d", ret);
> +
> +	ret = rte_dma_stop(test_dev_id);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to stop, %d", ret);
> +
> +	/* Check reconfigure and vchan setup after device stopped */
> +	cfg_vchans = dev_conf.nb_vchans = (dev_info.max_vchans - 1);
> +
> +	ret = setup_vchan(cfg_vchans);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
> +
> +	ret = rte_dma_start(test_dev_id);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to start, %d", ret);
> +
> +	ret = rte_dma_info_get(test_dev_id, &dev_info);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info, %d", ret);
> +	RTE_TEST_ASSERT_EQUAL(dev_info.nb_vchans, cfg_vchans, "incorrect reconfiguration");
> +
> +	ret = rte_dma_stop(test_dev_id);
> +	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to stop, %d", ret);
> +
> +	return TEST_SUCCESS;
> +}
> +
>  static int
>  test_dma_stats(void)
>  {
> @@ -328,7 +374,7 @@ test_dma_stats(void)
>  	RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
>  
>  	/* Setup one vchan for later test */
> -	ret = setup_one_vchan();
> +	ret = setup_vchan(1);
>  	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
>  
>  	/* Check for invalid vchan */
> @@ -400,7 +446,7 @@ test_dma_completed(void)
>  	int ret;
>  
>  	/* Setup one vchan for later test */
> -	ret = setup_one_vchan();
> +	ret = setup_vchan(1);
>  	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
>  
>  	ret = rte_dma_start(test_dev_id);
> @@ -459,7 +505,7 @@ test_dma_completed_status(void)
>  	int ret;
>  
>  	/* Setup one vchan for later test */
> -	ret = setup_one_vchan();
> +	ret = setup_vchan(1);
>  	RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
>  
>  	ret = rte_dma_start(test_dev_id);
> @@ -517,6 +563,7 @@ static struct unit_test_suite dma_api_testsuite = {
>  		TEST_CASE(test_dma_configure),
>  		TEST_CASE(test_dma_vchan_setup),
>  		TEST_CASE(test_dma_start_stop),
> +		TEST_CASE(test_dma_reconfigure),
>  		TEST_CASE(test_dma_stats),
>  		TEST_CASE(test_dma_dump),
>  		TEST_CASE(test_dma_completed),
>