[v2,07/20] net/mlx5: add flow VLAN item
Checks
Commit Message
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
drivers/net/mlx5/mlx5_flow.c | 123 +++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
Comments
On Wed, Jun 27, 2018 at 05:07:39PM +0200, Nelio Laranjeiro wrote:
> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
> ---
> drivers/net/mlx5/mlx5_flow.c | 123 +++++++++++++++++++++++++++++++++++
> 1 file changed, 123 insertions(+)
>
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index 6593eafa0..6a576ddd9 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -420,6 +420,126 @@ mlx5_flow_item_eth(const struct rte_flow_item *item, struct rte_flow *flow,
> return size;
> }
>
> +/**
> + * Update the VLAN tag in the Ethernet spec.
> + *
> + * @param attr[in, out]
> + * Pointer to Verbs attributes structure.
> + * @param eth[in]
> + * Verbs structure containing the VLAN information to copy.
> + */
> +static void
> +mlx5_flow_item_vlan_update(struct ibv_flow_attr *attr,
> + struct ibv_flow_spec_eth *eth)
> +{
> + unsigned int i;
> + enum ibv_flow_spec_type search = IBV_FLOW_SPEC_ETH;
> + struct ibv_spec_header *hdr = (struct ibv_spec_header *)
> + ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
> +
> + for (i = 0; i != attr->num_of_specs; ++i) {
> + if (hdr->type == search) {
> + struct ibv_flow_spec_eth *e =
> + (struct ibv_flow_spec_eth *)hdr;
> +
> + e->val.vlan_tag = eth->val.vlan_tag;
> + e->mask.vlan_tag = eth->mask.vlan_tag;
You'll have to overwrite ether_type as well, otherwise the e->ether_type would
have TPID.
> + break;
> + }
> + hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
> + }
> +}
> +
> +/**
> + * Validate VLAN layer and possibly create/modify the Verbs specification.
> + *
> + * @param item[in]
> + * Item specification.
> + * @param flow[in, out]
> + * Pointer to flow structure.
> + * @param flow_size[in]
> + * Size of the buffer to store the specification.
> + * @param error
> + * Pointer to error structure.
> + *
> + * @return
> + * size in bytes necessary for the conversion, a negative errno value
> + * otherwise and rte_errno is set.
> + */
> +static int
> +mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
> + const size_t flow_size, struct rte_flow_error *error)
> +{
> + const struct rte_flow_item_vlan *spec = item->spec;
> + const struct rte_flow_item_vlan *mask = item->mask;
> + const struct rte_flow_item_vlan nic_mask = {
> + .tci = RTE_BE16(0x0fff),
> + };
> + unsigned int size = sizeof(struct ibv_flow_spec_eth);
> + struct ibv_flow_spec_eth eth = {
> + .type = IBV_FLOW_SPEC_ETH,
> + .size = size,
> + };
> + int ret;
> + const uint32_t lm = MLX5_FLOW_LAYER_OUTER_L3 |
> + MLX5_FLOW_LAYER_OUTER_L4;
What does 'lm' stand for? Better to use l34m?
> + const uint32_t vlanm = MLX5_FLOW_LAYER_OUTER_VLAN;
> + const uint32_t l2m = MLX5_FLOW_LAYER_OUTER_L2;
> +
> + if (flow->layers & vlanm)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "L2 layers already configured");
L2? Not VLAN?
> + else if ((flow->layers & lm) != 0)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + item,
> + "L2 layer cannot follow L3/L4 layer");
> + if (!mask)
> + mask = &rte_flow_item_vlan_mask;
> + ret = mlx5_flow_item_validate(item, (const uint8_t *)mask,
> + (const uint8_t *)&nic_mask,
> + sizeof(struct rte_flow_item_vlan), error);
> + if (ret)
> + return ret;
> + if (spec) {
> + eth.val.vlan_tag = spec->tci;
> + eth.mask.vlan_tag = mask->tci;
> + eth.val.vlan_tag &= eth.mask.vlan_tag;
> + eth.val.ether_type = spec->inner_type;
> + eth.mask.ether_type = mask->inner_type;
> + eth.val.ether_type &= eth.mask.ether_type;
> + }
> + /*
> + * From verbs perspective an empty VLAN is equivalent
> + * to a packet without VLAN layer.
> + */
> + if (!eth.mask.vlan_tag)
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
> + item->spec,
> + "VLAN cannot be empty");
> + /* Outer TPID cannot be matched. */
> + if (eth.mask.ether_type)
> + return rte_flow_error_set(error, ENOTSUP,
> + RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
> + item->spec,
> + "VLAN TPID matching is not"
> + " supported");
Not sure 100% but I don't think ether_type means TPID but the inner packet type
coming after the VLAN ID. E.g.
/dmac/smac/0x8100/TCI/0x0800/ipv4...
^
|
> + if (!(flow->layers & l2m)) {
> + if (size <= flow_size)
> + mlx5_flow_spec_verbs_add(flow, ð, size);
> + } else {
> + if (flow->verbs.attr)
> + mlx5_flow_item_vlan_update(flow->verbs.attr, ð);
> + size = 0; /**< Only an update is done in eth specification. */
Any specific reason to use doxygen style comment only here?
> + }
> + flow->layers |= MLX5_FLOW_LAYER_OUTER_L2 |
> + MLX5_FLOW_LAYER_OUTER_VLAN;
> + return size;
> +}
> +
> /**
> * Validate items provided by the user.
> *
> @@ -453,6 +573,9 @@ mlx5_flow_items(const struct rte_flow_item items[],
> case RTE_FLOW_ITEM_TYPE_ETH:
> ret = mlx5_flow_item_eth(items, flow, remain, error);
> break;
> + case RTE_FLOW_ITEM_TYPE_VLAN:
> + ret = mlx5_flow_item_vlan(items, flow, remain, error);
> + break;
> default:
> return rte_flow_error_set(error, ENOTSUP,
> RTE_FLOW_ERROR_TYPE_ITEM,
> --
> 2.18.0
>
On Tue, Jul 03, 2018 at 04:56:21PM -0700, Yongseok Koh wrote:
> On Wed, Jun 27, 2018 at 05:07:39PM +0200, Nelio Laranjeiro wrote:
> > Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
> > ---
> > drivers/net/mlx5/mlx5_flow.c | 123 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 123 insertions(+)
> >
> > diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> > index 6593eafa0..6a576ddd9 100644
> > --- a/drivers/net/mlx5/mlx5_flow.c
> > +++ b/drivers/net/mlx5/mlx5_flow.c
> > @@ -420,6 +420,126 @@ mlx5_flow_item_eth(const struct rte_flow_item *item, struct rte_flow *flow,
> > return size;
> > }
> >
> > +/**
> > + * Update the VLAN tag in the Ethernet spec.
> > + *
> > + * @param attr[in, out]
> > + * Pointer to Verbs attributes structure.
> > + * @param eth[in]
> > + * Verbs structure containing the VLAN information to copy.
> > + */
> > +static void
> > +mlx5_flow_item_vlan_update(struct ibv_flow_attr *attr,
> > + struct ibv_flow_spec_eth *eth)
> > +{
> > + unsigned int i;
> > + enum ibv_flow_spec_type search = IBV_FLOW_SPEC_ETH;
> > + struct ibv_spec_header *hdr = (struct ibv_spec_header *)
> > + ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
> > +
> > + for (i = 0; i != attr->num_of_specs; ++i) {
> > + if (hdr->type == search) {
> > + struct ibv_flow_spec_eth *e =
> > + (struct ibv_flow_spec_eth *)hdr;
> > +
> > + e->val.vlan_tag = eth->val.vlan_tag;
> > + e->mask.vlan_tag = eth->mask.vlan_tag;
>
> You'll have to overwrite ether_type as well, otherwise the e->ether_type would
> have TPID.
Right,
> > + break;
> > + }
> > + hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
> > + }
> > +}
> > +
> > +/**
> > + * Validate VLAN layer and possibly create/modify the Verbs specification.
> > + *
> > + * @param item[in]
> > + * Item specification.
> > + * @param flow[in, out]
> > + * Pointer to flow structure.
> > + * @param flow_size[in]
> > + * Size of the buffer to store the specification.
> > + * @param error
> > + * Pointer to error structure.
> > + *
> > + * @return
> > + * size in bytes necessary for the conversion, a negative errno value
> > + * otherwise and rte_errno is set.
> > + */
> > +static int
> > +mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
> > + const size_t flow_size, struct rte_flow_error *error)
> > +{
> > + const struct rte_flow_item_vlan *spec = item->spec;
> > + const struct rte_flow_item_vlan *mask = item->mask;
> > + const struct rte_flow_item_vlan nic_mask = {
> > + .tci = RTE_BE16(0x0fff),
> > + };
> > + unsigned int size = sizeof(struct ibv_flow_spec_eth);
> > + struct ibv_flow_spec_eth eth = {
> > + .type = IBV_FLOW_SPEC_ETH,
> > + .size = size,
> > + };
> > + int ret;
> > + const uint32_t lm = MLX5_FLOW_LAYER_OUTER_L3 |
> > + MLX5_FLOW_LAYER_OUTER_L4;
>
> What does 'lm' stand for? Better to use l34m?
l34m seems better,
> > + const uint32_t vlanm = MLX5_FLOW_LAYER_OUTER_VLAN;
> > + const uint32_t l2m = MLX5_FLOW_LAYER_OUTER_L2;
> > +
> > + if (flow->layers & vlanm)
> > + return rte_flow_error_set(error, ENOTSUP,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item,
> > + "L2 layers already configured");
>
> L2? Not VLAN?
Indeed it is VLAN.
> > + else if ((flow->layers & lm) != 0)
> > + return rte_flow_error_set(error, ENOTSUP,
> > + RTE_FLOW_ERROR_TYPE_ITEM,
> > + item,
> > + "L2 layer cannot follow L3/L4 layer");
> > + if (!mask)
> > + mask = &rte_flow_item_vlan_mask;
> > + ret = mlx5_flow_item_validate(item, (const uint8_t *)mask,
> > + (const uint8_t *)&nic_mask,
> > + sizeof(struct rte_flow_item_vlan), error);
> > + if (ret)
> > + return ret;
> > + if (spec) {
> > + eth.val.vlan_tag = spec->tci;
> > + eth.mask.vlan_tag = mask->tci;
> > + eth.val.vlan_tag &= eth.mask.vlan_tag;
> > + eth.val.ether_type = spec->inner_type;
> > + eth.mask.ether_type = mask->inner_type;
> > + eth.val.ether_type &= eth.mask.ether_type;
> > + }
> > + /*
> > + * From verbs perspective an empty VLAN is equivalent
> > + * to a packet without VLAN layer.
> > + */
> > + if (!eth.mask.vlan_tag)
> > + return rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
> > + item->spec,
> > + "VLAN cannot be empty");
> > + /* Outer TPID cannot be matched. */
> > + if (eth.mask.ether_type)
> > + return rte_flow_error_set(error, ENOTSUP,
> > + RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
> > + item->spec,
> > + "VLAN TPID matching is not"
> > + " supported");
>
> Not sure 100% but I don't think ether_type means TPID but the inner packet type
> coming after the VLAN ID. E.g.
>
> /dmac/smac/0x8100/TCI/0x0800/ipv4...
> ^
> |
I remember to have faced such issue several months ago, from what I
understood it is configurable but there is no way in Verbs to make it.
Currently (after testing) it matches the above logic, I will remove this
check.
> > + if (!(flow->layers & l2m)) {
> > + if (size <= flow_size)
> > + mlx5_flow_spec_verbs_add(flow, ð, size);
> > + } else {
> > + if (flow->verbs.attr)
> > + mlx5_flow_item_vlan_update(flow->verbs.attr, ð);
> > + size = 0; /**< Only an update is done in eth specification. */
>
> Any specific reason to use doxygen style comment only here?
No reason, I'll remove it.
Thanks,
@@ -420,6 +420,126 @@ mlx5_flow_item_eth(const struct rte_flow_item *item, struct rte_flow *flow,
return size;
}
+/**
+ * Update the VLAN tag in the Ethernet spec.
+ *
+ * @param attr[in, out]
+ * Pointer to Verbs attributes structure.
+ * @param eth[in]
+ * Verbs structure containing the VLAN information to copy.
+ */
+static void
+mlx5_flow_item_vlan_update(struct ibv_flow_attr *attr,
+ struct ibv_flow_spec_eth *eth)
+{
+ unsigned int i;
+ enum ibv_flow_spec_type search = IBV_FLOW_SPEC_ETH;
+ struct ibv_spec_header *hdr = (struct ibv_spec_header *)
+ ((uint8_t *)attr + sizeof(struct ibv_flow_attr));
+
+ for (i = 0; i != attr->num_of_specs; ++i) {
+ if (hdr->type == search) {
+ struct ibv_flow_spec_eth *e =
+ (struct ibv_flow_spec_eth *)hdr;
+
+ e->val.vlan_tag = eth->val.vlan_tag;
+ e->mask.vlan_tag = eth->mask.vlan_tag;
+ break;
+ }
+ hdr = (struct ibv_spec_header *)((uint8_t *)hdr + hdr->size);
+ }
+}
+
+/**
+ * Validate VLAN layer and possibly create/modify the Verbs specification.
+ *
+ * @param item[in]
+ * Item specification.
+ * @param flow[in, out]
+ * Pointer to flow structure.
+ * @param flow_size[in]
+ * Size of the buffer to store the specification.
+ * @param error
+ * Pointer to error structure.
+ *
+ * @return
+ * size in bytes necessary for the conversion, a negative errno value
+ * otherwise and rte_errno is set.
+ */
+static int
+mlx5_flow_item_vlan(const struct rte_flow_item *item, struct rte_flow *flow,
+ const size_t flow_size, struct rte_flow_error *error)
+{
+ const struct rte_flow_item_vlan *spec = item->spec;
+ const struct rte_flow_item_vlan *mask = item->mask;
+ const struct rte_flow_item_vlan nic_mask = {
+ .tci = RTE_BE16(0x0fff),
+ };
+ unsigned int size = sizeof(struct ibv_flow_spec_eth);
+ struct ibv_flow_spec_eth eth = {
+ .type = IBV_FLOW_SPEC_ETH,
+ .size = size,
+ };
+ int ret;
+ const uint32_t lm = MLX5_FLOW_LAYER_OUTER_L3 |
+ MLX5_FLOW_LAYER_OUTER_L4;
+ const uint32_t vlanm = MLX5_FLOW_LAYER_OUTER_VLAN;
+ const uint32_t l2m = MLX5_FLOW_LAYER_OUTER_L2;
+
+ if (flow->layers & vlanm)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L2 layers already configured");
+ else if ((flow->layers & lm) != 0)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "L2 layer cannot follow L3/L4 layer");
+ if (!mask)
+ mask = &rte_flow_item_vlan_mask;
+ ret = mlx5_flow_item_validate(item, (const uint8_t *)mask,
+ (const uint8_t *)&nic_mask,
+ sizeof(struct rte_flow_item_vlan), error);
+ if (ret)
+ return ret;
+ if (spec) {
+ eth.val.vlan_tag = spec->tci;
+ eth.mask.vlan_tag = mask->tci;
+ eth.val.vlan_tag &= eth.mask.vlan_tag;
+ eth.val.ether_type = spec->inner_type;
+ eth.mask.ether_type = mask->inner_type;
+ eth.val.ether_type &= eth.mask.ether_type;
+ }
+ /*
+ * From verbs perspective an empty VLAN is equivalent
+ * to a packet without VLAN layer.
+ */
+ if (!eth.mask.vlan_tag)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN cannot be empty");
+ /* Outer TPID cannot be matched. */
+ if (eth.mask.ether_type)
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ITEM_SPEC,
+ item->spec,
+ "VLAN TPID matching is not"
+ " supported");
+ if (!(flow->layers & l2m)) {
+ if (size <= flow_size)
+ mlx5_flow_spec_verbs_add(flow, ð, size);
+ } else {
+ if (flow->verbs.attr)
+ mlx5_flow_item_vlan_update(flow->verbs.attr, ð);
+ size = 0; /**< Only an update is done in eth specification. */
+ }
+ flow->layers |= MLX5_FLOW_LAYER_OUTER_L2 |
+ MLX5_FLOW_LAYER_OUTER_VLAN;
+ return size;
+}
+
/**
* Validate items provided by the user.
*
@@ -453,6 +573,9 @@ mlx5_flow_items(const struct rte_flow_item items[],
case RTE_FLOW_ITEM_TYPE_ETH:
ret = mlx5_flow_item_eth(items, flow, remain, error);
break;
+ case RTE_FLOW_ITEM_TYPE_VLAN:
+ ret = mlx5_flow_item_vlan(items, flow, remain, error);
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,