[v8,2/4] app/dma-perf: add PCI device support

  From: Amit Prakash Shukla <amitprakashs@marvell.com>

Add support to test performance for "device to memory" and
"memory to device" data transfer.

Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
---
 app/test-dma-perf/benchmark.c | 108 +++++++++++++++++++++++++++++++---
 app/test-dma-perf/config.ini  |  37 ++++++++++++
 app/test-dma-perf/main.c      |  67 +++++++++++++++++++++
 app/test-dma-perf/main.h      |   6 ++
 4 files changed, 209 insertions(+), 9 deletions(-)
  

Acked-by: Chengwen Feng <fengchengwen@huawei.com>

On 2023/11/22 19:06, Gowrishankar Muthukrishnan wrote:
> From: Amit Prakash Shukla <amitprakashs@marvell.com>
> 
> Add support to test performance for "device to memory" and
> "memory to device" data transfer.
> 
> Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
> Acked-by: Anoob Joseph <anoobj@marvell.com>
> ---
>  app/test-dma-perf/benchmark.c | 108 +++++++++++++++++++++++++++++++---
>  app/test-dma-perf/config.ini  |  37 ++++++++++++
>  app/test-dma-perf/main.c      |  67 +++++++++++++++++++++
>  app/test-dma-perf/main.h      |   6 ++
>  4 files changed, 209 insertions(+), 9 deletions(-)
> 

...
  

Hi Amit,

There are many commit for dma-perf, I've done a re-review and have a few comments, pls see below:

On 2023/11/22 19:06, Gowrishankar Muthukrishnan wrote:
> From: Amit Prakash Shukla <amitprakashs@marvell.com>
> 
> Add support to test performance for "device to memory" and
> "memory to device" data transfer.
> 
> Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
> Acked-by: Anoob Joseph <anoobj@marvell.com>
> ---
>  app/test-dma-perf/benchmark.c | 108 +++++++++++++++++++++++++++++++---
>  app/test-dma-perf/config.ini  |  37 ++++++++++++
>  app/test-dma-perf/main.c      |  67 +++++++++++++++++++++
>  app/test-dma-perf/main.h      |   6 ++
>  4 files changed, 209 insertions(+), 9 deletions(-)
> 
> diff --git a/app/test-dma-perf/benchmark.c b/app/test-dma-perf/benchmark.c
> index 9b1f58c78c..eaed224c67 100644
> --- a/app/test-dma-perf/benchmark.c
> +++ b/app/test-dma-perf/benchmark.c
> @@ -127,17 +127,54 @@ cache_flush_buf(__rte_unused struct rte_mbuf **array,
>  #endif
>  }
>  
> +static int
> +vchan_data_populate(uint32_t dev_id, struct rte_dma_vchan_conf *qconf,
> +		    struct test_configure *cfg)
> +{
> +	struct rte_dma_info info;
> +
> +	qconf->direction = cfg->transfer_dir;
> +
> +	rte_dma_info_get(dev_id, &info);
> +	if (!(RTE_BIT64(qconf->direction) & info.dev_capa))
> +		return -1;
> +
> +	qconf->nb_desc = cfg->ring_size.cur;
> +
> +	switch (qconf->direction) {
> +	case RTE_DMA_DIR_MEM_TO_DEV:
> +		qconf->dst_port.pcie.vfen = 1;
> +		qconf->dst_port.port_type = RTE_DMA_PORT_PCIE;
> +		qconf->dst_port.pcie.coreid = cfg->dcoreid;
> +		qconf->dst_port.pcie.vfid = cfg->vfid;
> +		qconf->dst_port.pcie.pfid = cfg->pfid;
> +		break;
> +	case RTE_DMA_DIR_DEV_TO_MEM:
> +		qconf->src_port.pcie.vfen = 1;
> +		qconf->src_port.port_type = RTE_DMA_PORT_PCIE;
> +		qconf->src_port.pcie.coreid = cfg->scoreid;
> +		qconf->src_port.pcie.vfid = cfg->vfid;
> +		qconf->src_port.pcie.pfid = cfg->pfid;
> +		break;
> +	case RTE_DMA_DIR_MEM_TO_MEM:
> +	case RTE_DMA_DIR_DEV_TO_DEV:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
>  /* Configuration of device. */
>  static void
> -configure_dmadev_queue(uint32_t dev_id, uint32_t ring_size)
> +configure_dmadev_queue(uint32_t dev_id, struct test_configure *cfg)
>  {
>  	uint16_t vchan = 0;
>  	struct rte_dma_info info;
>  	struct rte_dma_conf dev_config = { .nb_vchans = 1 };
> -	struct rte_dma_vchan_conf qconf = {
> -		.direction = RTE_DMA_DIR_MEM_TO_MEM,
> -		.nb_desc = ring_size
> -	};
> +	struct rte_dma_vchan_conf qconf = { 0 };
> +
> +	if (vchan_data_populate(dev_id, &qconf, cfg) != 0)
> +		rte_exit(EXIT_FAILURE, "Error with vchan data populate.\n");
>  
>  	if (rte_dma_configure(dev_id, &dev_config) != 0)
>  		rte_exit(EXIT_FAILURE, "Error with dma configure.\n");
> @@ -159,7 +196,6 @@ configure_dmadev_queue(uint32_t dev_id, uint32_t ring_size)
>  static int
>  config_dmadevs(struct test_configure *cfg)
>  {
> -	uint32_t ring_size = cfg->ring_size.cur;
>  	struct lcore_dma_map_t *ldm = &cfg->lcore_dma_map;
>  	uint32_t nb_workers = ldm->cnt;
>  	uint32_t i;
> @@ -176,7 +212,7 @@ config_dmadevs(struct test_configure *cfg)
>  		}
>  
>  		ldm->dma_ids[i] = dev_id;
> -		configure_dmadev_queue(dev_id, ring_size);
> +		configure_dmadev_queue(dev_id, cfg);
>  		++nb_dmadevs;
>  	}
>  
> @@ -302,13 +338,22 @@ do_cpu_mem_copy(void *p)
>  	return 0;
>  }
>  
> +static void
> +dummy_free_ext_buf(void *addr, void *opaque)
> +{
> +	RTE_SET_USED(addr);
> +	RTE_SET_USED(opaque);
> +}
> +
>  static int
>  setup_memory_env(struct test_configure *cfg, struct rte_mbuf ***srcs,
>  			struct rte_mbuf ***dsts)
>  {
> +	static struct rte_mbuf_ext_shared_info *ext_buf_info;
>  	unsigned int buf_size = cfg->buf_size.cur;
>  	unsigned int nr_sockets;
>  	uint32_t nr_buf = cfg->nr_buf;
> +	uint32_t i;
>  
>  	nr_sockets = rte_socket_count();
>  	if (cfg->src_numa_node >= nr_sockets ||
> @@ -361,16 +406,47 @@ setup_memory_env(struct test_configure *cfg, struct rte_mbuf ***srcs,
>  		return -1;
>  	}
>  
> +	if (cfg->transfer_dir == RTE_DMA_DIR_DEV_TO_MEM ||
> +	    cfg->transfer_dir == RTE_DMA_DIR_MEM_TO_DEV) {
> +		ext_buf_info = rte_malloc(NULL, sizeof(struct rte_mbuf_ext_shared_info), 0);
> +		if (ext_buf_info == NULL) {
> +			printf("Error: ext_buf_info malloc failed.\n");
> +			return -1;
> +		}
> +	}
> +
> +	if (cfg->transfer_dir == RTE_DMA_DIR_DEV_TO_MEM) {
> +		ext_buf_info->free_cb = dummy_free_ext_buf;
> +		ext_buf_info->fcb_opaque = NULL;
> +		for (i = 0; i < nr_buf; i++) {
> +			/* Using mbuf structure to hold remote iova address. */
> +			rte_pktmbuf_attach_extbuf((*srcs)[i], (void *)cfg->raddr,
> +						  (rte_iova_t)cfg->raddr, 0, ext_buf_info);
> +			rte_mbuf_ext_refcnt_update(ext_buf_info, 1);
> +		}
> +	}
> +
> +	if (cfg->transfer_dir == RTE_DMA_DIR_MEM_TO_DEV) {
> +		ext_buf_info->free_cb = dummy_free_ext_buf;
> +		ext_buf_info->fcb_opaque = NULL;
> +		for (i = 0; i < nr_buf; i++) {
> +			/* Using mbuf structure to hold remote iova address. */
> +			rte_pktmbuf_attach_extbuf((*dsts)[i], (void *)cfg->raddr,
> +						  (rte_iova_t)cfg->raddr, 0, ext_buf_info);
> +			rte_mbuf_ext_refcnt_update(ext_buf_info, 1);
> +		}
> +	}
> +
>  	return 0;
>  }
>  
>  void
>  mem_copy_benchmark(struct test_configure *cfg, bool is_dma)
>  {
> -	uint16_t i;
> +	uint32_t i;
>  	uint32_t offset;
>  	unsigned int lcore_id = 0;
> -	struct rte_mbuf **srcs = NULL, **dsts = NULL;
> +	struct rte_mbuf **srcs = NULL, **dsts = NULL, **m = NULL;
>  	struct lcore_dma_map_t *ldm = &cfg->lcore_dma_map;
>  	unsigned int buf_size = cfg->buf_size.cur;
>  	uint16_t kick_batch = cfg->kick_batch.cur;
> @@ -476,6 +552,20 @@ mem_copy_benchmark(struct test_configure *cfg, bool is_dma)
>  			avg_cycles_total / nb_workers, bandwidth_total, mops_total);
>  
>  out:
> +
> +	if (cfg->transfer_dir == RTE_DMA_DIR_DEV_TO_MEM)
> +		m = srcs;
> +	else if (cfg->transfer_dir == RTE_DMA_DIR_MEM_TO_DEV)
> +		m = dsts;
> +
> +	if (m) {
> +		for (i = 0; i < nr_buf; i++)
> +			rte_pktmbuf_detach_extbuf(m[i]);
> +
> +		if (m[0]->shinfo && rte_mbuf_ext_refcnt_read(m[0]->shinfo) == 0)
> +			rte_free(m[0]->shinfo);
> +	}
> +
>  	/* free mbufs used in the test */
>  	if (srcs != NULL)
>  		rte_pktmbuf_free_bulk(srcs, nr_buf);
> diff --git a/app/test-dma-perf/config.ini b/app/test-dma-perf/config.ini
> index 4d59234b2a..cddcf93c6e 100644
> --- a/app/test-dma-perf/config.ini
> +++ b/app/test-dma-perf/config.ini
> @@ -38,6 +38,23 @@
>  
>  ; "skip" To skip a test-case set skip to 1.
>  
> +; Parameters to be configured for data transfers from "mem to dev" and "dev to mem":
> +; ==================================================================================
> +; "direction" denotes the direction of data transfer. It can take 3 values:
> +;    0 - mem to mem transfer
> +;    1 - mem to dev transfer
> +;    2 - dev to mem transfer

I prefer readable string not number, for examples:
mem2mem
mem2dev
dev2mem

> +; If not specified the default value is 0 (mem to mem transfer).
> +
> +; "raddr" remote iova address for "mem to dev" and "dev to mem" transfer.
> +
> +; "scoreid" denotes source PCIe core index.
> +; "dcoreid" denotes destination PCIe core index.
> +; "pfid" denotes PF-id to be used for data transfer
> +; "vfid" denotes VF-id of PF-id to be used for data transfer.

too many entries, and it all about pcie, the 'struct rte_dma_port_param' future may support other bus.

Suggest the entry is vchan_dev, user could input some thing like
1. vchan_dev=bus=pcie,coreid=1,pfid=0,vfid=1,addr=xxx
   add add descriptor, only valid when direction is one of mem2dev or dev2mem

It could use kvargs library to parse the value of entry vchan_dev

> +
> +; =========== End of "mem to dev" and "dev to mem" config parameters. ==============
> +
>  [case1]
>  type=DMA_MEM_COPY
>  mem_size=10
> @@ -52,6 +69,26 @@ lcore_dma=lcore10@0000:00:04.2, lcore11@0000:00:04.3
>  eal_args=--in-memory --file-prefix=test
>  
>  [case2]
> +skip=1
> +type=DMA_MEM_COPY
> +direction=2
> +raddr=0x200000000
> +scoreid=0
> +dcoreid=0
> +pfid=0
> +vfid=0
> +mem_size=10
> +buf_size=64,4096,2,MUL
> +dma_ring_size=1024
> +kick_batch=32
> +src_numa_node=0
> +dst_numa_node=0
> +cache_flush=0
> +test_seconds=2
> +lcore_dma=lcore10@0000:00:04.2, lcore11@0000:00:04.3
> +eal_args=--in-memory --file-prefix=test
> +
> +[case3]
>  type=CPU_MEM_COPY
>  mem_size=10
>  buf_size=64,8192,2,MUL
> diff --git a/app/test-dma-perf/main.c b/app/test-dma-perf/main.c
> index 33c3750bb1..3eddf2e40a 100644
> --- a/app/test-dma-perf/main.c
> +++ b/app/test-dma-perf/main.c
> @@ -16,6 +16,7 @@
>  #include <rte_cfgfile.h>
>  #include <rte_string_fns.h>
>  #include <rte_lcore.h>
> +#include <rte_dmadev.h>
>  
>  #include "main.h"
>  
> @@ -331,9 +332,11 @@ load_configs(const char *path)
>  	struct test_configure *test_case;
>  	char section_name[CFG_NAME_LEN];
>  	const char *case_type;
> +	const char *transfer_dir;
>  	const char *lcore_dma;
>  	const char *mem_size_str, *buf_size_str, *ring_size_str, *kick_batch_str;
>  	const char *skip;
> +	const char *raddr, *scoreid, *dcoreid, *vfid, *pfid;
>  	int args_nr, nb_vp;
>  	bool is_dma;
>  
> @@ -371,6 +374,20 @@ load_configs(const char *path)
>  		if (strcmp(case_type, DMA_MEM_COPY) == 0) {
>  			test_case->test_type = TEST_TYPE_DMA_MEM_COPY;
>  			test_case->test_type_str = DMA_MEM_COPY;
> +
> +			transfer_dir = rte_cfgfile_get_entry(cfgfile, section_name, "direction");
> +			if (transfer_dir == NULL) {
> +				printf("Transfer direction not configured."
> +					" Defaulting it to MEM to MEM transfer.\n");
> +				test_case->transfer_dir = RTE_DMA_DIR_MEM_TO_MEM;
> +			} else
> +				test_case->transfer_dir = (uint8_t)atoi(transfer_dir);
> +
> +			if (test_case->transfer_dir >= RTE_DMA_DIR_DEV_TO_DEV) {
> +				printf("Error: Invalid transfer direction configured.\n");
> +				test_case->is_valid = false;
> +				continue;
> +			}
>  			is_dma = true;
>  		} else if (strcmp(case_type, CPU_MEM_COPY) == 0) {
>  			test_case->test_type = TEST_TYPE_CPU_MEM_COPY;
> @@ -382,6 +399,56 @@ load_configs(const char *path)
>  			continue;
>  		}
>  
> +		if (test_case->transfer_dir == RTE_DMA_DIR_MEM_TO_DEV ||
> +			test_case->transfer_dir == RTE_DMA_DIR_DEV_TO_MEM) {
> +			char *endptr;
> +
> +			raddr = rte_cfgfile_get_entry(cfgfile, section_name, "raddr");
> +			if (raddr == NULL) {
> +				printf("Error: No raddr configured for case%d.\n", i + 1);
> +				test_case->is_valid = false;
> +				continue;
> +			}
> +			test_case->raddr = strtoull(raddr, &endptr, 16);
> +
> +			vfid = rte_cfgfile_get_entry(cfgfile, section_name, "vfid");
> +			if (vfid == NULL) {
> +				printf("Error: No vfid configured for case%d.\n", i + 1);
> +				test_case->is_valid = false;
> +				continue;
> +			}
> +			test_case->vfid = (uint16_t)atoi(vfid);
> +
> +			pfid = rte_cfgfile_get_entry(cfgfile, section_name, "pfid");
> +			if (pfid == NULL) {
> +				printf("Error: No pfid configured for case%d.\n", i + 1);
> +				test_case->is_valid = false;
> +				continue;
> +			}
> +			test_case->pfid = (uint8_t)atoi(pfid);
> +
> +		}
> +
> +		if (test_case->transfer_dir == RTE_DMA_DIR_DEV_TO_MEM) {
> +			scoreid = rte_cfgfile_get_entry(cfgfile, section_name, "scoreid");
> +			if (scoreid == NULL) {
> +				printf("Error: No scoreid configured for case%d.\n", i + 1);
> +				test_case->is_valid = false;
> +				continue;
> +			}
> +			test_case->scoreid = (uint8_t)atoi(scoreid);
> +		}
> +
> +		if (test_case->transfer_dir == RTE_DMA_DIR_MEM_TO_DEV) {
> +			dcoreid = rte_cfgfile_get_entry(cfgfile, section_name, "dcoreid");
> +			if (dcoreid == NULL) {
> +				printf("Error: No dcoreid configured for case%d.\n", i + 1);
> +				test_case->is_valid = false;
> +				continue;
> +			}
> +			test_case->dcoreid = (uint8_t)atoi(dcoreid);
> +		}
> +

suggest add a subfunction to wrap parsing device's config.


>  		test_case->src_numa_node = (int)atoi(rte_cfgfile_get_entry(cfgfile,
>  								section_name, "src_numa_node"));
>  		test_case->dst_numa_node = (int)atoi(rte_cfgfile_get_entry(cfgfile,
> diff --git a/app/test-dma-perf/main.h b/app/test-dma-perf/main.h
> index 32670151af..8ac3270fba 100644
> --- a/app/test-dma-perf/main.h
> +++ b/app/test-dma-perf/main.h
> @@ -42,6 +42,7 @@ struct test_configure {
>  	bool is_valid;
>  	bool is_skip;
>  	uint8_t test_type;
> +	uint8_t transfer_dir;
>  	const char *test_type_str;
>  	uint16_t src_numa_node;
>  	uint16_t dst_numa_node;
> @@ -57,6 +58,11 @@ struct test_configure {
>  	uint16_t test_secs;
>  	const char *eal_args;
>  	uint8_t scenario_id;
> +	uint8_t scoreid;
> +	uint8_t dcoreid;
> +	uint8_t pfid;
> +	uint16_t vfid;
> +	uintptr_t raddr;

suggest create new struct:
struct test_vchan_dev_config {
	struct rte_dma_port_param port;
	uintptr_t addr;
};

So defined as:
  struct test_vchan_dev_config vchan_dev;

Thanks

>  };
>  
>  void mem_copy_benchmark(struct test_configure *cfg, bool is_dma);
>
  

Hi Chengwen,

Thanks for the review and feedback. I will send the next version with suggested changes.

Thanks,
Amit Shukla

> -----Original Message-----
> From: fengchengwen <fengchengwen@huawei.com>
> Sent: Wednesday, February 21, 2024 8:56 AM
> To: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>;
> dev@dpdk.org; Amit Prakash Shukla <amitprakashs@marvell.com>
> Cc: Anoob Joseph <anoobj@marvell.com>; Cheng Jiang
> <honest.jiang@foxmail.com>; Kevin Laatz <kevin.laatz@intel.com>; Bruce
> Richardson <bruce.richardson@intel.com>; Pavan Nikhilesh Bhagavatula
> <pbhagavatula@marvell.com>; Thomas Monjalon <thomas@monjalon.net>
> Subject: [EXT] Re: [PATCH v8 2/4] app/dma-perf: add PCI device support
> 
> External Email
> 
> ----------------------------------------------------------------------

<snip>

> >  	if (srcs != NULL)
> >  		rte_pktmbuf_free_bulk(srcs, nr_buf); diff --git
> > a/app/test-dma-perf/config.ini b/app/test-dma-perf/config.ini index
> > 4d59234b2a..cddcf93c6e 100644
> > --- a/app/test-dma-perf/config.ini
> > +++ b/app/test-dma-perf/config.ini
> > @@ -38,6 +38,23 @@
> >
> >  ; "skip" To skip a test-case set skip to 1.
> >
> > +; Parameters to be configured for data transfers from "mem to dev" and
> "dev to mem":
> > +;
> >
> +==================================================================
> ===
> > +============= ; "direction" denotes the direction of data transfer.
> > +It can take 3 values:
> > +;    0 - mem to mem transfer
> > +;    1 - mem to dev transfer
> > +;    2 - dev to mem transfer
> 
> I prefer readable string not number, for examples:
> mem2mem
> mem2dev
> dev2mem
> 
> > +; If not specified the default value is 0 (mem to mem transfer).
> > +
> > +; "raddr" remote iova address for "mem to dev" and "dev to mem" transfer.
> > +
> > +; "scoreid" denotes source PCIe core index.
> > +; "dcoreid" denotes destination PCIe core index.
> > +; "pfid" denotes PF-id to be used for data transfer ; "vfid" denotes
> > +VF-id of PF-id to be used for data transfer.
> 
> too many entries, and it all about pcie, the 'struct rte_dma_port_param' future
> may support other bus.
> 
> Suggest the entry is vchan_dev, user could input some thing like 1.
> vchan_dev=bus=pcie,coreid=1,pfid=0,vfid=1,addr=xxx
>    add add descriptor, only valid when direction is one of mem2dev or
> dev2mem
> 
> It could use kvargs library to parse the value of entry vchan_dev
> 
> > +
> > +; =========== End of "mem to dev" and "dev to mem" config parameters.
> > +==============
> > +
> >  [case1]
> >  type=DMA_MEM_COPY
> >  mem_size=10
> > @@ -52,6 +69,26 @@ lcore_dma=lcore10@0000:00:04.2,
> > lcore11@0000:00:04.3  eal_args=--in-memory --file-prefix=test
> >

<snip>

> > +
> > +		if (test_case->transfer_dir == RTE_DMA_DIR_DEV_TO_MEM) {
> > +			scoreid = rte_cfgfile_get_entry(cfgfile, section_name,
> "scoreid");
> > +			if (scoreid == NULL) {
> > +				printf("Error: No scoreid configured for
> case%d.\n", i + 1);
> > +				test_case->is_valid = false;
> > +				continue;
> > +			}
> > +			test_case->scoreid = (uint8_t)atoi(scoreid);
> > +		}
> > +
> > +		if (test_case->transfer_dir == RTE_DMA_DIR_MEM_TO_DEV) {
> > +			dcoreid = rte_cfgfile_get_entry(cfgfile, section_name,
> "dcoreid");
> > +			if (dcoreid == NULL) {
> > +				printf("Error: No dcoreid configured for
> case%d.\n", i + 1);
> > +				test_case->is_valid = false;
> > +				continue;
> > +			}
> > +			test_case->dcoreid = (uint8_t)atoi(dcoreid);
> > +		}
> > +
> 
> suggest add a subfunction to wrap parsing device's config.
> 
> 
> >  		test_case->src_numa_node =
> (int)atoi(rte_cfgfile_get_entry(cfgfile,
> >
> 	section_name, "src_numa_node"));
> >  		test_case->dst_numa_node =
> (int)atoi(rte_cfgfile_get_entry(cfgfile,
> > diff --git a/app/test-dma-perf/main.h b/app/test-dma-perf/main.h index
> > 32670151af..8ac3270fba 100644
> > --- a/app/test-dma-perf/main.h
> > +++ b/app/test-dma-perf/main.h
> > @@ -42,6 +42,7 @@ struct test_configure {
> >  	bool is_valid;
> >  	bool is_skip;
> >  	uint8_t test_type;
> > +	uint8_t transfer_dir;
> >  	const char *test_type_str;
> >  	uint16_t src_numa_node;
> >  	uint16_t dst_numa_node;
> > @@ -57,6 +58,11 @@ struct test_configure {
> >  	uint16_t test_secs;
> >  	const char *eal_args;
> >  	uint8_t scenario_id;
> > +	uint8_t scoreid;
> > +	uint8_t dcoreid;
> > +	uint8_t pfid;
> > +	uint16_t vfid;
> > +	uintptr_t raddr;
> 
> suggest create new struct:
> struct test_vchan_dev_config {
> 	struct rte_dma_port_param port;
> 	uintptr_t addr;
> };
> 
> So defined as:
>   struct test_vchan_dev_config vchan_dev;
> 
> Thanks
> 
> >  };
> >
> >  void mem_copy_benchmark(struct test_configure *cfg, bool is_dma);
> >