[V1,1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule
Commit Message
the number of rules created is affected by the profile and TCAM. the maximum profile is 128 and
the maximum TCAM is 512. in order to test the maximum profile, need to create rules that consume
less TCAM to ensure that the profile will reach the maximum before TCAM exhausted
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
test_plans/iavf_fdir_test_plan.rst | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
Comments
Acked-by Peng, Yuan <yuan.peng@intel.com>
-----Original Message-----
From: Jiale, SongX <songx.jiale@intel.com>
Sent: Tuesday, August 31, 2021 11:28 AM
To: dts@dpdk.org
Cc: Peng, Yuan <yuan.peng@intel.com>; Jiale, SongX <songx.jiale@intel.com>
Subject: [dts] [PATCH V1 1/2] test_plans/iavf_fdir: replace rules with less consumption TCAM rule
@@ -4420,20 +4420,19 @@ Subcase 1: 128 profiles
2. create 8 rules with different patterns on each port::
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / udp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / tcp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2020 src is 2001::2 / sctp src is 22 dst is 23 / end actions queue index 1 / mark / end
- flow create 0 ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end
- flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 2 / end
+ flow create 0 ingress pattern eth / ipv4 / l2tpv3oip session_id is 1 / end actions queue index 1 / mark / end
+ flow create 0 ingress pattern eth / ipv6 / l2tpv3oip session_id is 2 / end actions queue index 1 / mark / end
+ flow create 0 ingress pattern eth / ipv4 / tcp / end actions queue index 2 / mark / end
+ flow create 0 ingress pattern eth / ipv6 / tcp / end actions queue index 2 / mark / end
+ flow create 0 ingress pattern eth / ipv4 / esp spi is 1 / end actions queue index 3 / mark / end
+ flow create 0 ingress pattern eth / ipv6 / esp spi is 2 / end actions queue index 3 / mark / end
+ flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 4 / mark id 1 / end
+ flow create 0 ingress pattern eth / ipv6 / udp / pfcp s_field is 1 / end actions queue index 4 / end
created successfully on port 0-12,
failed from rule 6 on port 13::
- testpmd> flow create 13 ingress pattern eth type is 0x8863 / end actions queue index 1 / mark id 1 / end
- eth
+ testpmd> flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions queue index 4 / mark id 1 / end
iavf_execute_vf_cmd(): No response or return failure (-5) for cmd 47
iavf_fdir_add(): fail to execute command OP_ADD_FDIR_FILTER
iavf_flow_create(): Failed to create flow
@@ -4462,6 +4461,7 @@ Subcase 1: 128 profiles
profile 0 and profile 1 are default profile for specific packet.
we design case with 2*100G card, so 110 profiles can be used for vf.
if we use 4*25G card, only 94 profiles can be used for vf.
+ if card is chapman beach 100g*2, one pf port equals a general 100g*2 card,so 118 profiles can be used for vf
4. send matched packets to vf 12,
the packets are redirected to the expected queue.
@@ -6429,4 +6429,4 @@ packets::
pkt11 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP()/UDP(dport=2152)/GTP_U_Header()/GTPPDUSessionContainer(type=1)/IPv6(src="2001::2", dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/TCP(sport=22, dport=23)/Raw('x'*20)
pkt12 = Ether(src="a4:bf:01:51:27:ca", dst="00:11:22:33:44:55")/IP()/UDP(dport=2152)/GTP_U_Header()/GTPPDUSessionContainer(type=1)/IPv6(src="2001::2", dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/UDP(sport=22, dport=23)/Raw('x'*20)
-repeat step 1-12 of subcase 1.
\ No newline at end of file
+repeat step 1-12 of subcase 1.