diff mbox series

[V1,2/2] tests/TestSuite_veb_switch:use differents cores between vf to vf

Message ID 20201229015722.5500-2-weix.xie@intel.com (mailing list archive)
State Accepted
Headers show
Series [V1,1/2] tests/TestSuite_floating_veb:use differents cores between vf to vf | expand

Commit Message

Xie, WeiX Dec. 29, 2020, 1:57 a.m. UTC
If several testpmd are started at the same time for vfs, the rx_stats scale between vf to vf are quite different.
So different cores should be used.

Signed-off-by: Xie wei <weix.xie@intel.com>
---
 tests/TestSuite_veb_switch.py | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

Comments

Xie, WeiX Dec. 29, 2020, 1:58 a.m. UTC | #1
Tested-by:  Xie,WeiX < weix.xie@intel.com>

Regards,
Xie Wei


> -----Original Message-----
> From: Xie wei [mailto:weix.xie@intel.com]
> Sent: Tuesday, December 29, 2020 9:57 AM
> To: dts@dpdk.org
> Cc: Xie, WeiX <weix.xie@intel.com>
> Subject: [dts][PATCH V1 2/2] tests/TestSuite_veb_switch:use differents
> cores between vf to vf
diff mbox series

Patch

diff --git a/tests/TestSuite_veb_switch.py b/tests/TestSuite_veb_switch.py
index 81894782..00dd76e7 100644
--- a/tests/TestSuite_veb_switch.py
+++ b/tests/TestSuite_veb_switch.py
@@ -182,6 +182,10 @@  class TestVEBSwitching(TestCase):
         self.pf_mac_address = self.dut.get_mac_address(0)
         self.pf_pci = self.dut.ports_info[self.used_dut_port]['pci']
 
+        self.dut.init_reserved_core()
+        self.cores_vf0 = self.dut.get_reserved_core('2C', 0)
+        self.cores_vf1 = self.dut.get_reserved_core('2C', 0)
+
     def set_up(self):
         """
         This is to clear up environment before the case run.
@@ -239,13 +243,10 @@  class TestVEBSwitching(TestCase):
         the packets. Check Inter VF-VF MAC switch.
         """
         self.setup_env(driver='default')
-        self.dut.init_reserved_core()
-        cores_vf1 = self.dut.get_reserved_core('2C',0)
-        self.pmdout.start_testpmd(cores_vf1, prefix="test1", ports=[self.sriov_vfs_port[0].pci], param="--eth-peer=0,%s" % self.vf1_mac)
+        self.pmdout.start_testpmd(self.cores_vf0, prefix="test1", ports=[self.sriov_vfs_port[0].pci], param="--eth-peer=0,%s" % self.vf1_mac)
         self.dut.send_expect("set fwd txonly", "testpmd>")
         self.dut.send_expect("set promisc all off", "testpmd>")
-        cores_vf2 = self.dut.get_reserved_core('2C',0)
-        self.pmdout_2.start_testpmd(cores_vf2, prefix="test2", ports=[self.sriov_vfs_port[1].pci])
+        self.pmdout_2.start_testpmd(self.cores_vf1, prefix="test2", ports=[self.sriov_vfs_port[1].pci])
         self.session_secondary.send_expect("set fwd rxonly", "testpmd>")
         self.session_secondary.send_expect("set promisc all off", "testpmd>")
         self.session_secondary.send_expect("start", "testpmd>", 5)
@@ -458,12 +459,12 @@  class TestVEBSwitching(TestCase):
         self.pmdout.start_testpmd("Default", prefix="test1", ports=[self.pf_pci])
         self.dut.send_expect("set promisc all off", "testpmd>")
 
-        self.pmdout_2.start_testpmd("Default", prefix="test2", ports=[self.sriov_vfs_port[0].pci], param="--eth-peer=0,%s" % self.vf1_mac)
+        self.pmdout_2.start_testpmd(self.cores_vf0, prefix="test2", ports=[self.sriov_vfs_port[0].pci], param="--eth-peer=0,%s" % self.vf1_mac)
         self.session_secondary.send_expect("set fwd txonly", "testpmd>")
         self.session_secondary.send_expect("set promisc all off", "testpmd>")
         time.sleep(2)
 
-        self.pmdout_3.start_testpmd("Default", prefix="test3", ports=[self.sriov_vfs_port[1].pci])
+        self.pmdout_3.start_testpmd(self.cores_vf1, prefix="test3", ports=[self.sriov_vfs_port[1].pci])
         self.session_third.send_expect("mac_addr add 0 %s" % self.vf1_mac, "testpmd>")
         self.session_third.send_expect("set fwd rxonly", "testpmd>")
         self.session_third.send_expect("set promisc all off", "testpmd>")