[2/2] test_plans/cvl_switch_filter_pppoe_test_plan: add new test plan

diff --git a/test_plans/cvl_switch_filter_pppoe_test_plan.rst b/test_plans/cvl_switch_filter_pppoe_test_plan.rst
new file mode 100644
index 00000000..a2854276
--- /dev/null
+++ b/test_plans/cvl_switch_filter_pppoe_test_plan.rst
@@ -0,0 +1,5720 @@ 
+.. Copyright (c) <2019-2020>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=======================
+CVL Switch Filter Tests
+=======================
+
+Description
+===========
+
+This document provides the plan for testing switch filter feature of CVL, including:
+
+* Enable switch filter for PPPOE in non-pipeline/pipeline mode (comm #1 package)
+
+In pipeline mode, a flow can be set at one specific stage by setting parameter ``priority``. Currently,
+we support two stages: priority = 0 or !0. Flows with priority 0 located at the first pipeline stage
+which typically be used as a firewall. At this stage, flow rules are created for the device's exact
+match engine: switch. Flows with priority !0 located at the second stage, typically packets are
+classified here and be steered to specific queue or queue group. At this stage, flow rules are created
+for device's flow director engine.
+
+In non-pipeline mode, ``priority`` is ignored, a flow rule can be created as a flow director rule or a
+switch rule depends on its pattern/action. If a rule is supported by switch or fdir at the same time, it
+will be created in the fdir table first. Therefore, to test switch filter in non-pipeline mode, we need to
+fill the fdir table first, and then the rules are created in the switch filter table. The capacity of fdir
+table is 16K, of which 14K is shared by all pfs and vfs, and the remaining 2K is gurantee for pfs. If 4*25G
+NIC, the gurantee for each pf is 512. If 2*100G NIC, the gurantee of each pf is 1024. so 1 pf can create at
+most 14848 rules on 4 ports card and 15360 rules on 2 ports card.
+
+Pattern and input set
+---------------------
+
+  +---------------------+-------------------------------+---------------------------------------------------------------------------------------+
+  |                     |                               |                                       Input Set                                       |
+  |    Packet Types     |           Pattern             +-------------------------------------------+-------------------------------------------+
+  |                     |                               |              non-pipeline mode            |              pipeline mode                |
+  +=====================+===============================+===========================================+===========================================+
+  |  ethertype filter   | ethertype filter_PPPOES       | [Ether type]                              | [Ether type]                              |
+  +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV4_PAY       | [Dest MAC], [VLAN], [seid],               | [Dest MAC], [VLAN], [seid],               |
+  |                     | _session_id_proto_id          | [pppoe_proto_id]                          | [pppoe_proto_id]                          |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                	    | MAC_VLAN_PPPOE_IPV6_PAY       | [Dest MAC], [VLAN], [seid],               | [Dest MAC], [VLAN], [seid],               |
+  |                     | _session_id_proto_id          | [pppoe_proto_id]                          | [pppoe_proto_id]                          |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV4_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id]      | [Dest MAC], [seid], [pppoe_proto_id]      |
+  |                     | _proto_id                     |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV6_PAY_session_id | [Dest MAC], [seid], [pppoe_proto_id]      | [Dest MAC], [seid], [pppoe_proto_id]      |
+  |                     | _proto_id                     |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV4_PAY_IP_address | [Source IP], [Dest IP]                    | [Source IP], [Dest IP]                    |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV4_UDP_PAY        | [Source IP], [Dest IP],                   | [Source IP], [Dest IP],                   |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV4_UDP_PAY        | [Source IP], [Dest IP]                    | [Source IP], [Dest IP]                    |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV4_TCP_PAY        | [Source IP], [Dest IP],                   | [Source IP], [Dest IP],                   |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV4_TCP_PAY        | [Source IP], [Dest IP]                    | [Source IP], [Dest IP]                    |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV6_PAY_IP_address | [Source IP], [Dest IP]                    | [Source IP], [Dest IP]                    |
+  |      PPPOES         +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV6_UDP_PAY        | [Source IP], [Dest IP],                   | [Source IP], [Dest IP],                   |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV6_UDP_PAY        | [Source IP], [Dest IP]                    | [Source IP], [Dest IP]                    |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV6_TCP_PAY        | [Source IP], [Dest IP],                   | [Source IP], [Dest IP],                   |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPV6_TCP_PAY        | [Source IP], [Dest IP],                   | [Source IP], [Dest IP],                   |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV4_PAY       | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     | _IP_address                   |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV4_UDP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV4_UDP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV4_TCP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV4_TCP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV6_PAY       | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     | _IP_address                   |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV6_UDP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV6_UDP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV6_TCP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     |                               | [Source Port], [Dest Port]                | [Source Port], [Dest Port]                |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPV6_TCP_PAY   | [VLAN], [Source IP], [Dest IP]            | [VLAN], [Source IP], [Dest IP]            |
+  |                     | _non_src_dst_port             |                                           |                                           |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_LCP_PAY             | [Dest MAC], [seid], [pppoe_proto_id]      | [Dest MAC], [seid], [pppoe_proto_id]      |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_PPPOE_IPCP_PAY            | [Dest MAC], [seid], [pppoe_proto_id]      | [Dest MAC], [seid], [pppoe_proto_id]      |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_LCP_PAY        | [Dest MAC], [VLAN], [seid],               | [Dest MAC], [VLAN], [seid],               |
+  |                     |                               | [pppoe_proto_id]                          | [pppoe_proto_id]                          |
+  |                     +-------------------------------+-------------------------------------------+-------------------------------------------+
+  |                     | MAC_VLAN_PPPOE_IPCP_PAY       | [Dest MAC], [VLAN], [seid],               | [Dest MAC], [VLAN], [seid],               |
+  |                     |                               | [pppoe_proto_id]                          | [pppoe_proto_id]                          |
+  +---------------------+-------------------------------+-------------------------------------------+-------------------------------------------+
+
+.. note::
+
+   1. The maximum input set length of a switch rule is 32 bytes, and src ipv6,
+      dst ipv6 account for 32 bytes. Therefore, for ipv6 cases, if need to test
+      fields other than src, dst ip, we create rule by removing src or dst ip in
+      the test plan.
+
+   2. For MAC_IPV4_TUN_IPV4_FRAG/MAC_IPV4_TUN_IPV4_PAY cases and
+      MAC_IPV4_TUN_MAC_IPV4_FRAG/MAC_IPV4_TUN_MAC_IPV4_PAY cases, the input set
+      of each pair is the same, so use MAC_IPV4_TUN_IPV4 and MAC_IPV4_TUN_MAC_IPV4
+      pattern to replace them in the test plan.
+
+Supported function type
+-----------------------
+
+* validate
+* create
+* destroy
+* flush
+* list
+
+Supported action type
+---------------------
+
+* to queue
+* to queue group
+* drop
+
+Prerequisites
+=============
+
+1. Hardware:
+   columbiaville_25g/columbiaville_100g
+   design the cases with 2 ports card.
+
+2. software:
+
+   - dpdk: http://dpdk.org/git/dpdk
+   - scapy: http://www.secdev.org/projects/scapy/
+
+3. Copy comm #1 package to /lib/firmware/intel/ice/ddp/ice.pkg,
+   then load driver::
+
+     rmmod ice
+     insmod ice.ko
+
+4. Compile DPDK::
+
+     make -j install T=x86_64-native-linuxapp-gcc
+
+5. Bind pf to dpdk driver::
+
+     ./usertools/dpdk-devbind.py -b vfio-pci 18:00.2
+
+6. Launch dpdk with the following arguments in non-pipeline mode::
+
+     ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0 --log-level="ice,8" -- -i --txq=16 --rxq=16 --cmdline-file=testpmd_fdir_rules
+     testpmd> port config 0 rss-hash-key ipv4 1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd1234abcd
+     testpmd> set fwd rxonly
+     testpmd> set verbose 1
+     testpmd> start
+
+   If set VXLAN flow rule::
+
+      testpmd> rx_vxlan_port add 4789 0
+
+   Note: file ``testpmd_fdir_rules`` contains 15,360 fdir rules to make fdir table full.
+
+   Launch dpdk in pipeline mode with the following testpmd command line::
+
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0000:18:00.0,pipeline-mode-support=1 --log-level="ice,8" -- -i --txq=16 --rxq=16
+
+Test case: Ethertype filter
+===========================
+
+Ethertype filter_PPPOES
+-----------------------
+
+create PPPOE rule to enable RSS for PPPOE packets::
+
+  testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55", type=0x8864)/PPPoE(sessionid=3)/Raw("x" *80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55", type=0x8863)/PPPoED()/Raw("x" *80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 0
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth type is 0x8864 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_VLAN_PPPOE_IPV4_PAY_session_id_proto_id
+======================================================
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+---------------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+-----------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_VLAN_PPPOE_IPV6_PAY_session_id_proto_id
+======================================================
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:54",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+----------------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+-----------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_PPPOE_IPV4_PAY_session_id_proto_id
+=================================================
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+---------------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+    get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: MAC_PPPOE_IPV6_PAY_session_id_proto_id
+=================================================
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:54",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x0057)/IPv6()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+---------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packet are distributed to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+---------------------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packet to queue 4 or 5.
+   send mismatched packets, check the packet not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+-----------
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packet is dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x0057 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: PPPoE data
+=====================
+
+Subcase 1: MAC_PPPOE_IPV4_PAY_IP_address
+----------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 2: MAC_PPPOE_IPV4_UDP_PAY
+---------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 3: MAC_PPPOE_IPV4_UDP_PAY_non_src_dst_port
+--------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 4: MAC_PPPOE_IPV4_TCP_PAY
+---------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 5: MAC_PPPOE_IPV4_TCP_PAY_non_src_dst_port
+--------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 6: MAC_PPPOE_IPV6_PAY_IP_address
+----------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 7: MAC_PPPOE_IPV6_UDP_PAY
+---------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 8: MAC_PPPOE_IPV6_UDP_PAY_non_src_dst_port
+--------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 9: MAC_PPPOE_IPV6_TCP_PAY
+---------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 10: MAC_PPPOE_IPV6_TCP_PAY_non_src_dst_port
+---------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 11: MAC_VLAN_PPPOE_IPV4_PAY_IP_address
+----------------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/Raw("x"*80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 12: MAC_VLAN_PPPOE_IPV4_UDP_PAY
+---------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 13: MAC_VLAN_PPPOE_IPV4_UDP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / udp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 14: MAC_VLAN_PPPOE_IPV4_TCP_PAY
+---------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 15: MAC_VLAN_PPPOE_IPV4_TCP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.3", dst="192.168.1.2")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.4")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP(src="192.168.1.1", dst="192.168.1.2")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2.
+   send mismatched packets, check the packets are not to queue 2.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions queue index 2 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 7 or 8.
+   send mismatched packets, check the packets are not to queue 7 and 8.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 7 and 8.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions rss queues 7 8 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv4 src is 192.168.1.1 dst is 192.168.1.2 / tcp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 16: MAC_VLAN_PPPOE_IPV6_PAY_IP_address
+----------------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x"*80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 17: MAC_VLAN_PPPOE_IPV6_UDP_PAY
+---------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 18: MAC_VLAN_PPPOE_IPV6_UDP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / udp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 19: MAC_VLAN_PPPOE_IPV6_TCP_PAY
+---------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 4 or 5.
+   send mismatched packets, check the packets are not to queue 4 and 5.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 4 and 5.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions rss queues 4 5 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / tcp src is 25 dst is 23 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 20: MAC_VLAN_PPPOE_IPV6_TCP_PAY_non_src_dst_port
+--------------------------------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1537", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/TCP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / vlan tci is 1 / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 / tcp / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: PPPoE Control
+========================
+
+create a PPPOE rule to enable RSS for PPPOE_control packets::
+
+  testpmd> flow create 0 ingress pattern eth / pppoes / end actions rss types pppoe end key_len 0 queues end / end
+
+Subcase 1: MAC_PPPOE_LCP_PAY
+----------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow destroy 0 rule 15361
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 2: MAC_PPPOE_IPCP_PAY
+-----------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow destroy 0 rule 15361
+     testpmd> flow list 0
+
+   check the rules not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 3: MAC_VLAN_PPPOE_LCP_PAY
+---------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0xc021)/PPP_LCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow destroy 0 rule 15361
+     testpmd> flow list 0
+
+   check the rules not exist in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0xc021 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Subcase 4: MAC_VLAN_PPPOE_IPCP_PAY
+----------------------------------
+
+matched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+mismatched packets::
+
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:53",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=2,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=4)/PPP(proto=0x8021)/PPP_IPCP()/Raw("x" * 80)],iface="ens786f0",count=1)
+  sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0021)/IP()/Raw("x" * 80)],iface="ens786f0",count=1)
+
+to queue action
+................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 1.
+   send mismatched packets, check the packets are not to queue 1.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions queue index 1 / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+to queue group action
+......................
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are to queue 2 or 3.
+   send mismatched packets, check the packets are not to queue 2 and 3.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow destroy 0 rule 15361
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 2 and 3.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions rss queues 2 3 end / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+drop action
+............
+
+1. validate a rule::
+
+     testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   get the message::
+
+     Flow rule validated
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+2. create a rule::
+
+     testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   get the message::
+
+     Succeeded to create (2) flow
+
+   check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+3. send matched packets, check the packets are dropped.
+   send mismatched packets, check the packets are not dropped.
+
+4. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not dropped.
+
+5. check the pattern in pipeline mode
+
+   validate a rule::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x8021 / end actions drop / end
+
+   repeat step 1-4 to check the pattern in pipeline mode.
+
+Test case: negative cases
+=========================
+Note: some of the error messages may be differernt.
+
+Subcase 1: invalid parameters of queue index
+--------------------------------------------
+
+1. create a rule with invalid queue index::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end
+
+   Failed to create flow, report message::
+
+     Invalid action type or queue number: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 2: invalid parameters of rss queues
+-------------------------------------------
+
+1. Invalid number of queues::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end
+
+   Failed to create flow, report messag::
+
+     Invalid action type or queue number: Invalid argument
+
+2. Discontinuous queues::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end
+
+   Failed to create flow, report message::
+
+     Discontinuous queue region: Invalid argument
+
+3. Invalid queue index::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end
+
+   Failed to create flow, report message::
+
+     Invalid queue region indexes: Invalid argument
+
+4. set queue group 17 queues::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 end / end
+
+   Failed to create flow, report message::
+
+     Invalid action type or queue number: Invalid argument
+
+5. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rules not exist in the list.
+
+Subcase 4: unsupported input set
+--------------------------------
+
+1. create an nvgre rule with unsupported input set field [inner tos]::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end
+
+2. Failed to create flow, report message::
+
+     Invalid input set: Invalid argument
+
+3. check the rule list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 5: duplicated rules
+---------------------------
+
+1. create a rule::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+2. create the same rule again, Failed to create flow, report message::
+
+     switch filter create flow fail: Invalid argument
+
+3. check the flow list::
+
+     testpmd> flow list 0
+
+   check only the first rule exists in the list.
+
+Subcase 6: conflicted rules
+---------------------------
+
+1. create a rule::
+
+    testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+    testpmd> flow list 0
+
+   check the rule exists in the list.
+
+2. create a rule with same input set but different actions::
+
+    testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 2 / end
+    testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions drop / end
+
+   Failed to create the two rules, report message::
+
+    switch filter create flow fail: Invalid argument
+
+3. check the flow list::
+
+     testpmd> flow list 0
+
+   check only the first rule exists in the list.
+
+Subcase 7: multiple actions
+---------------------------
+
+1. create a rule with two conflicted actions::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end
+
+   Failed to create flow, report message::
+
+     Invalid input action number: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 8: void action
+----------------------
+
+1. create a rule with void action::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end
+
+   Failed to create flow, report message::
+
+     NULL action.: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 9: unsupported action
+-----------------------------
+
+1. create a rule with void action::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end
+
+   Failed to create flow, report message::
+
+     Invalid action type: Invalid argument
+
+2. check the flow list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 10: delete a non-existing rule
+--------------------------------------
+
+1. check the rule list::
+
+     testpmd> flow list 0
+
+   check no switch filter rule exists in the list.
+
+2. destroy the rule 20000::
+
+     testpmd> flow destroy 0 rule 20000
+
+   check no error reports.
+
+Subcase 11: add long switch rule
+--------------------------------
+
+Description: A recipe has 5 words, one of which is reserved for switch ID,
+so a recipe can use 4 words, and a maximum of 5 recipes can be chained,
+one of which is reserved. Therefore, a rule can use up to 4*4*2 = 32 bytes.
+This case is used to test that a rule whose input set is longer than 32
+bytes can not be created successfully, and will not affect the creation of
+other rules.
+
+1. create a rule with input set length longer than 32 bytes::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   Failed to create flow, report message::
+
+     Invalid input set: Invalid argument
+
+2. check the rule list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+3. create a MAC_PPPOE_IPV6_UDP_PAY rule with to queue action::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / pppoes / ipv6 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+     testpmd> flow list 0
+
+   check the rule exists in the list.
+
+4. send matched packets::
+
+     sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+   check queue 1 receive the packet.
+   send mismatched packets::
+
+     sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2023")/UDP(sport=25,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+     sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=27,dport=23)/Raw("x" * 80)],iface="ens786f0",count=1)
+     sendp([Ether(src="11:22:33:44:55:99",dst="00:11:22:33:44:55",type=0x8864)/PPPoE(sessionid=3)/PPP(proto=0x0057)/IPv6(src="CDCD:910A:2222:5498:8475:1111:3900:1536", dst="CDCD:910A:2222:5498:8475:1111:3900:2022")/UDP(sport=25,dport=19)/Raw("x" * 80)],iface="ens786f0",count=1)
+
+   check the packets are not to queue 1.
+
+5. verify rules can be destroyed::
+
+     testpmd> flow destroy 0 rule 15360
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   send matched packets, check the packets are not to queue 1.
+
+Subcase 12: void input set value
+--------------------------------
+
+1. create a IPV4_PAY rule with void input set value::
+
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end
+
+   Failed to create flow, report message::
+
+     Invalid input set: Invalid argument
+
+2. check the rule list::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+
+Subcase 13: invalid port
+------------------------
+
+1. create a rule with invalid port::
+
+     testpmd> flow create 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+
+   Failed to create flow, report message::
+
+     No such device: No such device
+
+2. check the rule list on port 0::
+
+     testpmd> flow list 0
+
+   check the rule not exists in the list.
+   check on port 1::
+
+     testpmd> flow list 1
+
+   get the message::
+
+     Invalid port 1
+
+Test case: negative validation
+==============================
+Note: some of the error messages may be different.
+
+1. invalid parameters of queue index
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 16 / end
+
+   get the error message::
+
+     Invalid action type or queue number: Invalid argument
+
+2. invalid parameters of rss queues
+
+   Invalid number of queues::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 end / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 0 end / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues end / end
+
+   get the error message::
+
+     Invalid action type or queue number: Invalid argument
+
+   Discontinuous queues::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 1 2 3 5 end / end
+
+   get the error message::
+
+     Discontinuous queue region: Invalid argument
+
+   Invalid rss queues index::
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions rss queues 15 16 end / end
+
+   get the error message::
+
+     Invalid queue region indexes: Invalid argument
+
+4. unsupported input set
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth dst is 68:05:ca:8d:ed:a8 / ipv4 src is 192.168.1.2 dst is 192.168.1.3 tos is 4 / end actions queue index 1 / end
+
+   get the error message::
+
+     Invalid input set: Invalid argument
+
+5. multiple actions
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / rss queues 2 3 end / end
+
+   get the error message::
+
+     Invalid input action number: Invalid argument
+
+6. void action
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / udp src is 25 dst is 23 / end actions end
+
+   get the error message::
+
+     NULL action.: Invalid argument
+
+7. unsupported action
+
+     testpmd> flow validate 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions mark id 1 / end
+
+   get the error message::
+
+     Invalid action type: Invalid argument
+
+8. long switch rule
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / pppoes / ipv6 src is CDCD:910A:2222:5498:8475:1111:3900:1536 dst is CDCD:910A:2222:5498:8475:1111:3900:2022 / udp src is 25 dst is 23 / end actions queue index 1 / end
+
+   get the error message::
+
+     Invalid input set: Invalid argument
+
+9. void input set value
+
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 / end actions queue index 1 / end
+
+   get the error message::
+
+     Invalid input set: Invalid argument
+
+10. invalid port
+
+      testpmd> flow validate 1 priority 0 ingress pattern eth / ipv4 src is 192.168.0.20 dst is 192.168.0.21 ttl is 2 tos is 4 / end actions queue index 1 / end
+
+    get the error message::
+
+      No such device: No such device
+
+11. check the rule list::
+
+      testpmd> flow list 0
+
+    no rule exists in the list.