diff mbox series

[V2] test_plans/generic_flow_api: add case dual_vlan

Message ID 20210723174932.22401-1-yanx.xia@intel.com (mailing list archive)
State Accepted
Headers show
Series [V2] test_plans/generic_flow_api: add case dual_vlan | expand

Commit Message

Yan Xia July 23, 2021, 5:49 p.m. UTC
move test_dual_vlan in fortville_rss_granularity_config_test_plan.rst to generic_flow_api_test_plan.rst and modify lengacy command. 

Signed-off-by: Yan Xia <yanx.xia@intel.com>
---
 test_plans/generic_flow_api_test_plan.rst | 52 +++++++++++++++++++++++
 1 file changed, 52 insertions(+)

Comments

Peng, Yuan July 23, 2021, 9:23 a.m. UTC | #1
Acked-by Peng, Yuan <yuan.peng@intel.com>

-----Original Message-----
From: dts <dts-bounces@dpdk.org> On Behalf Of Yan Xia
Sent: Saturday, July 24, 2021 1:50 AM
To: dts@dpdk.org
Cc: Xia, YanX <yanx.xia@intel.com>
Subject: [dts] [PATCH V2] test_plans/generic_flow_api: add case dual_vlan
Tu, Lijuan July 26, 2021, 6:57 a.m. UTC | #2
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Yan Xia
> Sent: 2021年7月24日 1:50
> To: dts@dpdk.org
> Cc: Xia, YanX <yanx.xia@intel.com>
> Subject: [dts] [PATCH V2] test_plans/generic_flow_api: add case dual_vlan
> 
> move test_dual_vlan in fortville_rss_granularity_config_test_plan.rst to
> generic_flow_api_test_plan.rst and modify lengacy command.
> 

It mentioned "move", so should remove test_dual_vlan from fortville_rss_granularity_config_test_plan.rst at the same time.

> Signed-off-by: Yan Xia <yanx.xia@intel.com>
Tu, Lijuan July 29, 2021, 11:39 a.m. UTC | #3
> -----Original Message-----
> From: Xia, YanX <yanx.xia@intel.com>
> Sent: 2021年7月29日 17:32
> To: Tu, Lijuan <lijuan.tu@intel.com>; dts@dpdk.org
> Subject: RE: [dts] [PATCH V2] test_plans/generic_flow_api: add case dual_vlan
> 
> I have been removed test_dual_vlan in
> fortville_rss_granularity_config_test_plan.rst
> 
> > -----Original Message-----
> > From: Tu, Lijuan <lijuan.tu@intel.com>
> > Sent: Monday, July 26, 2021 2:57 PM
> > To: Xia, YanX <yanx.xia@intel.com>; dts@dpdk.org
> > Cc: Xia, YanX <yanx.xia@intel.com>
> > Subject: RE: [dts] [PATCH V2] test_plans/generic_flow_api: add case
> > dual_vlan
> >
> > > -----Original Message-----
> > > From: dts <dts-bounces@dpdk.org> On Behalf Of Yan Xia
> > > Sent: 2021年7月24日 1:50
> > > To: dts@dpdk.org
> > > Cc: Xia, YanX <yanx.xia@intel.com>
> > > Subject: [dts] [PATCH V2] test_plans/generic_flow_api: add case
> > > dual_vlan
> > >
> > > move test_dual_vlan in
> > > fortville_rss_granularity_config_test_plan.rst
> > > to generic_flow_api_test_plan.rst and modify lengacy command.
> > >
> >
> > It mentioned "move", so should remove test_dual_vlan from
> > fortville_rss_granularity_config_test_plan.rst at the same time.
> >
> > > Signed-off-by: Yan Xia <yanx.xia@intel.com>
> 

Applied with commit message changed.

Please mind your commit message next time.
diff mbox series

Patch

diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index 6a36a635..71f16187 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -1944,3 +1944,55 @@  Test case: Fortville fdir for l2 mac
             testpmd> flow create 0 ingress pattern eth dst is 11:11:11:11:11:11 / ipv4 / end actions mark id 3 / rss / end
 
         Verify second rule can not be created.
+
+Test case: Dual vlan(QinQ)
+=================================
+
+1. config testpmd on DUT
+
+   1. set up testpmd with Fortville NICs::
+
+         ./testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16 --tx-offloads=0x8fff
+
+   2. verbose configuration::
+
+         testpmd> set verbose 8
+
+   3. PMD fwd only receive the packets::
+
+         testpmd> set fwd rxonly
+
+   4. set extend on::
+
+         testpmd> vlan set extend on <port_id>
+
+   5. create rule::
+
+         testpmd> flow create 0 ingress pattern eth / end actions rss types l2-payload end queues end func toeplitz / end
+
+   6. start packet receive::
+
+         testpmd> start
+
+
+2. using scapy to send packets with dual vlan (QinQ) on tester::
+
+
+         sendp([Ether(dst="68:05:ca:30:6a:f8")/Dot1Q(id=0x8100,vlan=1)/Dot1Q(id=0x8100,vlan=2,type=0xaaaa)/Raw(load="x"*60)], iface=ttester_itf)
+
+   then got hash value and queue value that output from the testpmd on DUT.
+
+3. create flow rss type s-vlan c-vlan by testpmd on dut::
+
+
+      testpmd> flow create 0 ingress pattern eth / end actions rss types s-vlan c-vlan end key_len 0 queues end / end
+
+   1). send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the value should be
+   different with the values in step 2.
+
+
+   2). send packet as step 2 with changed ovlan id, got hash value and queue value that output from the testpmd on DUT, the value should be
+   different with the values in step 2 & step 1).
+
+   3). send packet as step 2 with changed ivlan id, got hash value and queue value that output from the testpmd on DUT, the value should be
+   different with the values in step 2 & step 1) & step 2).