From patchwork Wed Aug 18 21:54:03 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Peng, Yuan" X-Patchwork-Id: 97094 Return-Path: X-Original-To: patchwork@inbox.dpdk.org Delivered-To: patchwork@inbox.dpdk.org Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id 2708DA0C47; Thu, 19 Aug 2021 06:55:29 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 1930E4067E; Thu, 19 Aug 2021 06:55:29 +0200 (CEST) Received: from mga02.intel.com (mga02.intel.com [134.134.136.20]) by mails.dpdk.org (Postfix) with ESMTP id 0E6A140E01 for ; Thu, 19 Aug 2021 06:55:26 +0200 (CEST) X-IronPort-AV: E=McAfee;i="6200,9189,10080"; a="203683193" X-IronPort-AV: E=Sophos;i="5.84,333,1620716400"; d="scan'208";a="203683193" Received: from fmsmga003.fm.intel.com ([10.253.24.29]) by orsmga101.jf.intel.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 18 Aug 2021 21:55:25 -0700 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.84,333,1620716400"; d="scan'208";a="522006716" Received: from pengyuan-dpdk.sh.intel.com ([10.67.115.83]) by FMSMGA003.fm.intel.com with ESMTP; 18 Aug 2021 21:55:24 -0700 From: Peng Yuan To: dts@dpdk.org Cc: Peng Yuan Date: Wed, 18 Aug 2021 21:54:03 +0000 Message-Id: <20210818215403.99271-1-yuan.peng@intel.com> X-Mailer: git-send-email 2.17.1 MIME-Version: 1.0 Subject: [dts] [PATCH V2]test_plans/cvl_dcf_qos: configure QoS for vf/vsi in DCF test plan X-BeenThere: dts@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: test suite reviews and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dts-bounces@dpdk.org Sender: "dts" Add cvl_dcf_qos_test_plan.rst to dts. Add cvl_dcf_qos_test_plan to index.rst. Signed-off-by: Peng Yuan diff --git a/test_plans/cvl_dcf_qos_test_plan.rst b/test_plans/cvl_dcf_qos_test_plan.rst new file mode 100644 index 00000000..35b8efbe --- /dev/null +++ b/test_plans/cvl_dcf_qos_test_plan.rst @@ -0,0 +1,1753 @@ +.. Copyright (c) <2021>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +=================================== +CVL configure QoS for vf/vsi in DCF +=================================== + +Description +=========== + +Support ETS-based QoS configuration, including Arbiters configuration (strict priority, WFQ) +and BW Allocation and limitation. +1. Add a new virtchnl capability to indicate support for QoS +2. Enable DCF to set BW limits (min, max) for DPDK AVFs and arbitration mode. + To be accomplished by way of new DCF specific virtchnl op. + a) Bandwidth limits per VF (VSI) are within the context of BW allocated for the individual TCs + at TC layer (layer 2) in the topology. The profiles will be added at the VSI level. + b) In strict arbitration mode (vs ETS mode) a PIR can be applied to layer 2 TC nodes + by the DCF for predictable behavior. +3. Enable DPDK iAVF to query QoS capability, such as UP to TC mapping, + available BW (min, max) per TC etc. To be accomplished by way of new advance virtchnl op. +4. Enable DPDK iAVF to set TC to queue mapping, to be accomplished by way of new advance virtchnl op. +Note: The AVF inherits TCs that are configured on the PF. DCF tunes the BW allocation per TC for the target AVF. + +Prerequisites +============= + +1. Hardware: + 1 port from columbiaville_100g(NIC-1), 2 ports from columbiaville_25g(NIC-2) + one 100G cable, one 10G cable. + :: + + +---------------------------------+ + | DUT | IXIA | + +=================================+ + | 100G | + | NIC-1,Port-1 --- IXIA, Port-1 | + | 10G | + | NIC-2,Port-1 --- NIC-2,Port-2 | + +---------------------------------+ + + assume that device ID and pci address of NIC-1,Port-1 are ens785f0 and 18:00.0, + device ID and pci address of NIC-2,Port-1 are ens802f0 and 86:00.0. + +2. software: + + - dpdk: http://dpdk.org/git/dpdk + - runtime command: https://doc.dpdk.org/guides/testpmd_app_ug/testpmd_funcs.html + - lldptool: install the tool to configure DCB:: + + apt install lldpad + + or:: + + yum install lldpad + +3. don't allow the peer port modify the DCB parameter:: + + lldptool -T -i ens802f0 -V ETS-CFG willing=no + lldptool -T -i ens785f0 -V ETS-CFG willing=no + +4. Configure DCB TC bandwidth with lldp tool:: + + lldptool -T -i enp785s0f0 -V ETS-CFG willing=no tsa=0:strict,1:strict,2:strict,3:strict,4:strict,5:strict,6:strict,7:strict up2tc=0:0,1:0,2:0,3:1,4:2,5:0,6:0,7:0 tcbw=10,30,60,0,0,0,0,0 + + or configure DCB with dcbgetset tool(an internal tool to set DCB without peer negotiation):: + + ./dcbgetset enp785s0f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +5. Generate 2 VFs on NIC-1,Port-1 and NIC-2,Port-1:: + + echo 2 > /sys/bus/pci/devices/0000:18:00.0/sriov_numvfs + echo 2 > /sys/bus/pci/devices/0000:86:00.0/sriov_numvfs + +6. Set each VF0 as trust and set each VF1 mac address:: + + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + ip link set dev ens802f0 vf 0 trust on + ip link set ens802f0 vf 1 mac 00:11:22:33:44:66 + +7. Bind VFs to dpdk driver:: + + modprobe vfio-pci + ./usertools/dpdk-devbind.py -b vfio-pci 0000:18:01.0 0000:18:01.1 0000:86:01.0 0000:86:01.1 + ./usertools/dpdk-devbind.py -s + 0000:18:01.0 'Ethernet Adaptive Virtual Function 1889' drv=vfio-pci unused=iavf + 0000:18:01.1 'Ethernet Adaptive Virtual Function 1889' drv=vfio-pci unused=iavf + 0000:86:01.0 'Ethernet Adaptive Virtual Function 1889' drv=vfio-pci unused=iavf + 0000:86:01.1 'Ethernet Adaptive Virtual Function 1889' drv=vfio-pci unused=iavf + +8. 100G testpmd setting, just use 100G NIC port, start testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -- -i --txq=8 --rxq=8 --nb-cores=8 --port-topology=loop + + 10G testpmd setting, use 100G NIC and 25G NIC ports, start testpmd:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 86:01.0,cap=dcf -a 86:01.1 -- -i --txq=8 --rxq=8 --nb-cores=8 + +Note: I want to set the "--txq=16 --rxq=16", but it has an issue(or a known mechanism), so set "--txq=8 --rxq=8". + +Test case 1: strict mode, check peak_tb_rate +============================================ +Note: In strict mode, the "--tcbw" parameter is invalid. +the throughput is only limited by shaper profile, +and the TC priority follows the default order. + +1. DCB setting, set 3 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + ifconfig ens785f0 up + +2. start testpmd with 100G setting, then set profile and TC mapping:: + + port stop all + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 no + port start all + set fwd mac + start + +3. since configured 3 TCs, send four streams from IXIA, + mac address is vf1's mac address: "00:11:22:33:44:55", vlan=0, user priority=2,5,3,4, + user priority 2/5 map to TC0, 3 maps to TC1, 4 maps TC2. + frame size is 68 bytes(4 bytes vlan field added to 64 bytes packet), each stream desired 25% max rate. + send each stream separately, check the TX throughput of each priority and queue mapping: + user priority=2, throughput is 2MBps, mapping to queue0-3; + user priority=5, throughput is 2MBps, mapping to queue0-3; + user priority=3, throughput is 4MBps, mapping to queue4-5; + user priority=4, throughput is 4MBps, mapping to queue6-7; + send the four streams synchronously, the sum of throughput is 10MBps. + and the queue mapping is correct. + +4. restart testpmd, and map all the queues to 2 TCs(TC0 and TC1):: + + port stop all + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 no + port start all + set fwd mac + start + +5. send the same four streams as step3. + send each stream separately, check the TX throughput of each priority and queue mapping: + stream 4 are dropped by vf1. + user priority=2, throughput is 2MBps, mapping to queue0-3; + user priority=5, throughput is 2MBps, mapping to queue0-3; + user priority=3, throughput is 4MBps, mapping to queue4-7; + user priority=4, throughput is 0, no mapping queues. + send the four streams synchronously, the sum of throughput is 6MBps. + and the queue mapping is correct. + +Test case 2: ets mode, check peak_tb_rate +========================================= +Note: In ETS mode, the "--tcbw" parameter is valid. +the throughput is only limited by TC bandwidth distribution and shaper profile, +and the TC priority follows the value of the "--tcbw" setting. + +1. DCB setting, set 2 TCs bandwidth with ets mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,0,1,1,1,1 --tcbw 20,80,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,0,0,0,1,1,1,1 --tcbw 20,80,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ifconfig ens785f0 up + ifconfig ens802f0 up + +2. start testpmd with 10G setting, then set profile and TC mapping:: + + set portlist 0,2,1,3 + show config fwd + port stop all + add port tm node shaper profile 0 1 10000000 0 4000000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm node shaper profile 2 1 10000000 0 1000000000 0 0 0 + add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0 + add port tm leaf node 2 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 2 2 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 2 3 800 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 2 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 3 yes + port start all + set fwd mac + start + +3. send two streams from IXIA, vlan=0, priority=0/4(TC0/TC1), + mac address is VF1's mac address "00:11:22:33:44:55", + frame size is 68 bytes(4 bytes vlan field added to 64 bytes packet), each stream desired 50% max rate. + send each stream separately, check the port3(VF1 of 25G port) stats: + both of the tx rate is about 7.3Gbps(linerate); + stop forward, check queue mapping: + when send stream of UP=0, the tx queues are queue0-queue3; + when send stream of UP=4, the tx queues are queue4-queue7; + send 2 streams synchronously, each 50%max, + check the port3 stats, the tx rate is about 7.3Gbps, + stop forward, check the result: + the throughput's proportion of queue0-3 and queue4-7 is about 20:80 as the DCB TC bandwidth setting. + +4. set both two profiles' PIR to 500000000, other settings are the same as step2, + send same streams as step3. + send each stream separately, check the port3 tx rate is about 3.95Gbps, closed to the PIR 4Gbps, + check queue mapping is same as step3. + Send the two streams synchronously, the throughput is limited by the cable about 7.3Gbps. + check the port3 stats, the tx rate is still about 7.3Gbps, + stop forward, check the result, queue0-queue3 map TC0, queue4-queue7 map TC1 + TC0’s rate is about 3.34Gbps, TC1’s rate is about 3.95Gbps. + the two stream’s occupation is more than 20:80, about 45:55. + because TC1 throughput is limited by PIR, so the rest throughput is occupied by TC0. + +Test case 3: strict mode, check cmit_tb_rate +============================================ + +1. DCB setting, set 2 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 10,90,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 10,90,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + ifconfig ens785f0 up + ifconfig ens802f0 up + +2. start testpmd with 10G setting, then set profile and TC mapping as test_case 2 step2. + +3. send two streams from IXIA, + mac address is VF1's mac address "00:11:22:33:44:55", vlan=0, priority=0/3(TC0/TC1), + frame size is 68 bytes(4 bytes vlan field added to 64 bytes packet), each stream desired 50% max rate. + send each stream separately, check the port3(VF1 of 25G port) tx rate is about 7.3Gbps, + check queue mapping is same as test_case 2 step3. + send 2 streams synchronously, each 50%max + check the port3 stats, the tx rate is about 7.3Gbps, + stop forward, check the result, + queue0-queue3 which mapping to TC0 should have 80Mbps rate + queue4-queue7 which mapping to TC1 have about 7.22Gbps. + +Note: the cmit of the profile is not supported now, so the current expected result is: +all the TX throughput should at TC1, TC0 should has no throughput. + +Test case 4: ets mode, check cmit_tb_rate +========================================= + +1. DCB setting, set 3 TCs bandwidth with ets mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,1,1,2,2,2,2 --tcbw 1,10,89,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,0,1,1,2,2,2,2 --tcbw 1,10,89,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ifconfig ens785f0 up + ifconfig ens802f0 up + +2. start testpmd with 10G setting:: + + set portlist 0,2,1,3 + show config fwd + port stop all + add port tm node shaper profile 0 1 1000000000 0 4000000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm node shaper profile 2 1 100000000 0 1000000000 0 0 0 + add port tm node shaper profile 2 2 100000000 0 150000000 0 0 0 + add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 2 0 900 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 4 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 2 5 700 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 2 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 3 yes + port start all + set fwd mac + start + +3. send 8 streams from IXIA, vlan=0, priority=0-7(TC0-TC7), + mac address is VF1's mac address "00:11:22:33:44:55", + frame size is 1024 bytes, each stream desired 12.5% max rate. + send each stream separately, the PIR can be reached, and the queue mapping is correct: + UP0(TC0) stream maps queue0-1, the throughput is 1.2Gbps. + UP1(TC0) stream maps queue0-1, the throughput is 1.2Gbps. + UP2(TC1) stream maps queue2-5, the throughput is 1.2Gbps. + UP3(TC1) stream maps queue2-5, the throughput is 1.2Gbps. + UP4(TC2) stream maps queue6-7, the throughput is 8Gbps. + UP5(TC2) stream maps queue6-7, the throughput is 8Gbps. + UP6(TC2) stream maps queue6-7, the throughput is 8Gbps. + UP7(TC2) stream maps queue6-7, the throughput is 8Gbps. + send 8 streams synchronously, check throughput is 9.77Gbps, + TC2 and TC1's PIR can be satisfied, and the rest rate is given to TC0. + +4. set frame size to 68bytes, send 8 streams synchronously, + check the throughput is 7.273Gbps. all the TC can’t reach PIR. + TC0 rate is 0.072Gbps, occupys 0.01 ets BW. + TC1 rate is 0.72Gbps, occupys 0.1 ets BW. + TC2 rate is 6.48Gbps, occupys 0.89 ets BW. + The TC0-TC2’s rate occupation is same as bandwidth allocation: 1:10:89. + +Test case 5: 2 iavf VFs, strict mode, check peak_tb_rate +======================================================== + +1. DCB setting, set 3 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +2. create 3 VFs:: + + echo 3 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs + ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2 + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + ip link set ens785f0 vf 2 mac 00:11:22:33:44:66 + +3. start testpmd with 100G setting, different vsi node of same TC node use different profiles:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 18:01.2 -a 18:01.3 -- -i --txq=8 --rxq=8 --port-topology=loop --nb-cores=8 + port stop all + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 -1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 -1 0 0xffffffff 0 0 + add port tm leaf node 0 4 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 6 700 0 1 2 -1 0 0xffffffff 0 0 + add port tm leaf node 0 7 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 8 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + add port tm nonleaf node 2 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 2 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 2 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 2 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 2 yes vlan=0, priority=1,2,3,4, vlan=0, priority=1,2,3,4, + port start all + set fwd mac + start + +4. send 8 streams, stream0-3’s mac address is vf1's, vlan=0, priority=1/2/3/4(TC0/TC0/TC1/TC2), + stream4-7' mac address is vf2's, vlan=0, priority=1,2,3,4, + send each stream separatly, check the stats: + stream0 maps queue0-1 of port 1, the throughput reaches PIR of profile 1(16Mbps). + stream1 maps queue0-1 of port 1, the throughput reaches PIR of profile 1(16Mbps). + stream2 maps queue2-3 of port 1, the throughput reaches PIR of profile 2(32Mbps). + stream3 maps queue4-7 of port 1, the throughput reaches PIR of profile 1(16Mbps). + stream4 maps queue0-1 of port 2, the throughput reaches PIR of profile 1(16Mbps). + stream5 maps queue0-1 of port 2, the throughput reaches PIR of profile 1(16Mbps). + stream6 maps queue2-5 of port 2, the throughput reaches PIR of profile 1(16Mbps). + stream7 maps queue6-7 of port 2, the throughput reaches PIR of profile 2(32Mbps). + send all streams synchronously, each 12.5%max, check the sum of throughput reach 128Mbps. + each stream's queue mapping is correct. + +Test case 6: 2 iavf VFs, strict mode, check cmit_tb_rate +======================================================== + +1. DCB setting, set 3 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +2. create 3 VFs on each pf:: + + echo 3 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + ip link set ens785f0 vf 2 mac 00:11:22:33:44:66 + ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2 + echo 3 > /sys/bus/pci/devices/0000\:86\:00.0/sriov_numvfs + ip link set dev ens802f0 vf 0 trust on + ip link set ens802f0 vf 1 mac 00:11:22:33:44:77 + ip link set ens802f0 vf 2 mac 00:11:22:33:44:88 + ./usertools/dpdk-devbind.py -b vfio-pci 86:01.0 86:01.1 86:01.2 + +3. start testpmd with 10G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 18:01.2 -a 86:01.0,cap=dcf -a 86:01.1 -a 86:01.2 -- -i --txq=8 --rxq=8 --nb-cores=8 + set portlist 0,3,1,4,2,5 + show config fwd + port stop all + add port tm node shaper profile 0 1 100000000 0 4000000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 4 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 5 800 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + add port tm node shaper profile 3 1 100000000 0 500000000 0 0 0 + add port tm nonleaf node 3 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 3 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 3 800 1000 0 1 1 -1 1 0 0 + add port tm leaf node 3 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 2 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 3 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 4 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 5 800 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 3 no + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 no + add port tm nonleaf node 4 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 4 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 4 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 4 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 4 no + add port tm nonleaf node 2 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 2 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 2 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 2 no + add port tm nonleaf node 5 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 5 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 5 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 5 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 5 no + port start all + set fwd mac + start + +4. send 4 streams synchronously, stream0-1's mac address is vf1's, vlan id=0, UP=2/3, + streams2-3's mac address is vf2's, vlan id=0, UP=2/3, + frame size 68 bytes, each stream allocates 25%max. + check the vf4 and vf5 stats, the sum of tx rate is 7.27Gbps, each vf tx is 3.64Gbps. + in each vf, TC0 should occupied 0.8Gbps, the rest of throughput is occupied by TC1, which is about 2.84Gbps + stop the fwd, check each queue's tx stats, + vf4's queue0-queue3 and vf5's queue0-queue1 map to TC0, which occupied 0.8Gbps, + vf4's queue4-queue7 and vf5's queue2-queue7 map to TC1, which occupied 2.84Gbps. + +Note: now, the cmit_tb_rate setting can't take work, it is not supported by kernel. +so the current status should be: all the TX throughput are occupied by TC1, TC0 should have no throughput. + +Test case 7: 2 iavf VFs, ets mode +================================= + +1. DCB setting, set 3 TCs bandwidth with ets mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + +2. create 3 VFs on each pf:: + + echo 3 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + ip link set ens785f0 vf 2 mac 00:11:22:33:44:66 + ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2 + echo 3 > /sys/bus/pci/devices/0000\:86\:00.0/sriov_numvfs + ip link set dev ens802f0 vf 0 trust on + ip link set ens802f0 vf 1 mac 00:11:22:33:44:77 + ip link set ens802f0 vf 2 mac 00:11:22:33:44:88 + ./usertools/dpdk-devbind.py -b vfio-pci 86:01.0 86:01.1 86:01.2 + +3. start testpmd with 10G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 18:01.2 -a 86:01.0,cap=dcf -a 86:01.1 -a 86:01.2 -- -i --txq=8 --rxq=8 --nb-cores=8 + set portlist 0,3,1,4,2,5 + show config fwd + port stop all + add port tm node shaper profile 0 1 0 0 0 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 4 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 5 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 6 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 7 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 8 700 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm node shaper profile 3 1 0 0 0 0 0 0 + add port tm nonleaf node 3 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 3 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 3 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 3 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 3 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 2 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 3 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 4 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 5 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 6 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 7 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 3 8 700 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 3 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + add port tm nonleaf node 2 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 2 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 2 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 2 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 2 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 2 yes + add port tm nonleaf node 4 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 4 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 4 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 4 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 4 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 4 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 5 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 4 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 4 yes + add port tm nonleaf node 5 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 5 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 5 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 5 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 5 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 5 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 5 yes + port start all + set fwd mac + start + +4. send 8 streams, stream0-3’s mac address is vf1's, vlan=0, priority=1/2/3/4(TC0/TC0/TC1/TC2), + stream4-7’s mac address is vf2's, vlan=0, priority=1/2/3/4(TC0/TC0/TC1/TC2), + calculate the sum of vf1 and vf2 tx rate which belongs to TC0, mark it as t0, + calculate the sum of vf1 and vf2 tx rate which belongs to TC1 and TC2, mark them as t1 and t2. + check the proportion of t0:t1:t2 is 1:3:6, which can match the ets bandwidth limit 1:3:6, + and the queue mapping is: + stream1 maps queue0-1 of vf1, + stream2 maps queue0-1 of vf1, + stream3 maps queue2-3 of vf1, + stream4 maps queue4-7 of vf1, + stream5 maps queue0-1 of vf2, + stream6 maps queue0-1 of vf2, + stream7 maps queue2-5 of vf2, + stream8 maps queue6-7 of vf2. + +Test case 8: strict mode, 8 TCs +=============================== + +1. DCB setting, set 8 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +2. start testpmd with 100G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -- -i --txq=8 --rxq=8 --port-topology=loop --nb-cores=8 + port stop all + add port tm node shaper profile 0 1 1000000 0 400000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 200000000 0 0 0 + add port tm node shaper profile 0 3 1000000 0 100000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 500 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 400 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 300 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 200 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 6 600 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 7 600 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 8 500 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 9 500 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 10 400 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 11 400 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 12 300 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 13 300 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 14 200 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 15 200 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 500 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 400 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 300 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 200 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 600 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 500 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 400 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 300 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 200 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + port start all + set fwd mac + start + +3. send 8 streams vlan id=0, UP0-UP7，68bytes, each stream 12.5%max, which is much more than PIR. + Tx is limited by PIR, each TC can reach to PIR. + +4. change the shaper profile:: + + port stop all + add port tm node shaper profile 0 1 1000000 0 1780000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 500 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 400 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 300 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 200 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 6 600 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 7 600 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 8 500 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 9 500 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 10 400 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 11 400 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 12 300 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 13 300 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 14 200 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 15 200 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 500 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 400 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 300 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 200 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 600 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 500 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 400 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 300 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 200 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + port start all + set fwd mac + start + +5. send 8 streams vlan id=0, UP0-UP7, 68bytes, each stream 12.5%max, which is less than PIR. + stop the forward, check all the Tx packet drop is at queue0, which maps to TC0. + the throughput satisfy TC7-TC1 by priority. + +6. send 8 streams vlan id=0, UP0-UP7，1024bytes, each stream 12.5%max, which is less than PIR. + stop the forward, check all the Tx packet drop is at queue0, which maps to TC0. + the throughput satisfy TC7-TC1 by priority. + +Test case 9: strict mode, 1 TC +============================== + +1. DCB setting, set 1 TC bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,0,0,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +2. start testpmd with 100G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -- -i --txq=8 --rxq=8 --port-topology=loop --nb-cores=8 + port stop all + add port tm node shaper profile 0 1 1000000 0 1000000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 900 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + port start all + set fwd mac + start + +3. send 8 streams vlan id=0, UP0-UP7, which all map to TC0, 68bytes, each stream 12.5%max. + check the sum of Tx throughput can reach PIR. + only send 1 stream, check the Tx throughput can reach PIR too. + +Test case 10: ets mode, 8 TCs +============================= + +1. DCB setting, set 8 TCs bandwidth with ets mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 5,10,15,10,20,1,30,9 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,1,2,3,4,5,6,7 --tcbw 5,10,15,10,20,1,30,9 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + +2. start testpmd with 10G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 86:01.0,cap=dcf -a 86:01.1 -- -i --txq=8 --rxq=8 --nb-cores=8 + set portlist 0,2,1,3 + show config fwd + port stop all + add port tm node shaper profile 0 1 1000000 0 4000000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 2000000000 0 0 0 + add port tm node shaper profile 0 3 1000000 0 1000000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 500 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 400 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 300 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 200 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 6 600 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 7 600 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 8 500 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 9 500 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 0 10 400 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 11 400 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 12 300 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 13 300 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 14 200 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 15 200 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm node shaper profile 2 1 1000000 0 400000000 0 0 0 + add port tm node shaper profile 2 2 1000000 0 200000000 0 0 0 + add port tm node shaper profile 2 3 1000000 0 100000000 0 0 0 + add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 700 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 600 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 500 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 400 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 300 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 2 200 1000 0 1 1 -1 1 0 0 + add port tm leaf node 2 0 900 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 2 800 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 3 800 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 4 700 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 5 700 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 6 600 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 7 600 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 8 500 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 9 500 0 1 2 3 0 0xffffffff 0 0 + add port tm leaf node 2 10 400 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 11 400 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 12 300 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 13 300 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 2 14 200 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 2 15 200 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 2 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 500 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 400 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 300 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 200 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 600 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 500 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 400 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 300 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 200 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 700 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 600 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 500 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 400 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 300 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 3 200 1000 0 1 1 0 1 0 0 + add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 1 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 2 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 3 600 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 4 500 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 5 400 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 6 300 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 7 200 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 3 yes + port start all + set fwd mac + start + +3. send 8 streams vlan id=0, UP0-UP7, which map TC0-TC7, 68bytes, each stream 12.5%max, + check port3 stats, the Tx rate is 7.3Gbps. + stop forward, check the tx rate, queue0-queue4 correspond to TC0-TC4, can reach the PIR(100MBps), + queue6 which corresponds to TC6 is limited by PIR(200MBps) too. + queue7(maps to TC7) is limited by Rx IXIA traffic, can’t reach PIR(400MBps), + and TC5(maps to queue5) is the lowest priority, other TCs must be satisfied first, + so TC5 and TC7 are limited by the bandwidth distribution 1:9. + +4. set profile of port2 as below:: + + add port tm node shaper profile 2 1 1000000 0 100000000 0 0 0 + add port tm node shaper profile 2 2 1000000 0 250000000 0 0 0 + add port tm node shaper profile 2 3 1000000 0 100000000 0 0 0 + + queue0-queue4 and queue6-7 can reach PIR(are limited by PIR), + queue5(corresponds to TC5) is the lowest priority (1% BW set by DCB), + the rest rate are put to queue 5, may be more than 1% of whole throughput. + +5. Set all the profile PIR=0:: + + add port tm node shaper profile 2 1 0 0 0 0 0 0 + add port tm node shaper profile 2 2 0 0 0 0 0 0 + add port tm node shaper profile 2 3 0 0 0 0 0 0 + + check all the steam's tx throughput proportion is due to ets bandwidth distribution. + +Test case 11: ets mode, 1 TC +============================ + +1. DCB setting, set 1 TC bandwidth with ets mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,0,0,0,0,0 --tcbw 100,0,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + ./dcbgetset ens802f0 --ieee --up2tc 0,0,0,0,0,0,0,0 --tcbw 100,0,0,0,0,0,0,0 --tsa 2,2,2,2,2,2,2,2 --pfc 0,0,0,0,0,0,0,0 + +2. start testpmd with 10G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 86:01.0,cap=dcf -a 86:01.1 -- -i --txq=8 --rxq=8 --nb-cores=8 + set portlist 0,2,1,3 + show config fwd + port stop all + add port tm node shaper profile 0 1 1000000 0 10000000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 900 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + add port tm node shaper profile 2 1 1000000 0 1000000000 0 0 0 + add port tm nonleaf node 2 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 2 900 1000 0 1 1 -1 1 0 0 + add port tm leaf node 2 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 2 1 900 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 2 yes + add port tm nonleaf node 3 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 3 900 1000 0 1 1 0 1 0 0 + add port tm leaf node 3 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 4 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 5 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 6 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 3 7 900 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 3 yes + port start all + set fwd mac + start + +3. send 8 streams vlan id=0, UP0-UP7, 68bytes, each stream 12.5%max. + check the sum of Tx throughput can reach 7.3Gbps. + only send 1 stream, check the Tx throughput can reach 7.3Gbps too. + +Test case 12: query qos setting +=============================== + +1. DCB setting, set 3 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + ifconfig ens785f0 up + +2. start testpmd with 100G setting, then set profile and TC mapping:: + + port stop all + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 no + port start all + +3. show port tm capability:: + + show port tm cap 1 + + show port tm level capability:: + + show port tm level cap 1 0 + show port tm level cap 1 1 + show port tm level cap 1 2 + + show port tm node capability:: + + show port tm node cap 1 900 + show port tm node cap 1 800 + + check all the unit of rate is consistent. + +4. show port tm node type:: + + show port tm node type 1 0 + show port tm node type 1 900 + show port tm node type 1 1000 + + check the type is correct. + +Test case 13: pf reset +====================== + +1. run the test case 1, the result is as expected. + +2. reset pf:: + + echo 1 > /sys/devices/pci0000:17/0000:17:00.0/0000:18:00.0/reset + +3. send same streams as step1, check no packets received and transmitted. + +Test case 14: vf reset +====================== + +1. run the test case 1, the result is as expected. + +2. reset VF1 by setting mac addr:: + + ip link set ens785f0 vf 1 mac 00:11:22:33:44:66 + + then execute below command in testpmd:: + + port stop 1 + port reset 1 + port start 1 + start + +3. send same streams in step1 but with VF1's new mac address "00:11:22:33:44:66", + check TC0 stream maps to all queues, TC1 and TC2 stream map to queue0. + +4. set the qos settings as test case 1 step2 again. + send the same steams, check the same result as step 1. + +Note: there is a known issue, and a ticket tracking it. +the current status of step3 is that: after vf reset, TC0 stream maps to queue0-7, +TC1 stream maps to queue 5-7, TC2 stream has no througput. +all of TCs throughput is limited by profile 1. + +Test case 15: link status change +================================ + +1. run the test case 1, the result is as expected. + +2. change the link status:: + + ifconfig ens785f0 down + + check TC setting is not changed, the queue mapping is not changed, + The Tx rate is not changed. + +3. change the link status again:: + + ifconfig ens785f0 up + + check the status, get the same result. + +Test case 16: DCB setting TC change +=================================== + +1. run the test case 1, the result is as expected. + +2. reset the DCB setting as below:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,40,50,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +3. send the same streams as step 1, + Only send TC0 stream, queue0-queue7 of both Rx and Tx have traffic, load is balancing. + Only send TC1/TC2 streams, only queue0 has Rx and Tx traffic. + +NOTE: The kernel default status is TC0 stream mapping to all queues, other TC streams mapping to queue 0. + +Test case 17: negative case for requested VF +============================================ +1. DCB setting, set 2 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,0,0,0,0 --tcbw 20,80,0,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +2. create 2 VFs:: + + echo 2 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs + ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + +3. start testpmd with 100G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -- -i --txq=8 --rxq=8 --port-topology=loop --nb-cores=8 + port stop all + +Subcase 1: Requested VF id is valid +----------------------------------- +Set 3 VSIs, more than 2 VFs created:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0 + node id: too many VSI for one TC (error 33) + +Subcase 2: Valid number of TCs for the target VF +------------------------------------------------ +1. configured 2 TCs by DCB, but only set 1 TC node:: + + add port tm node shaper profile 0 1 63000 0 12500000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + ice_dcf_commit_check(): Not all enabled TC nodes are set + no error: (no stated reason) (error 0) + +2. Not all VFs are binded to TC node:: + + add port tm node shaper profile 0 1 63000 0 12500000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + ice_dcf_commit_check(): Not all VFs are binded to TC1 + no error: (no stated reason) (error 0) + +3. add 1 profile, but use 2 profiles:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + shaper profile id field (node params): shaper profile not exist (error 23) + +Subcase 3: Valid Min and Max values +----------------------------------- +1. Min default value is 500Kbps:: + + add port tm node shaper profile 0 1 62999 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800000 0 1 2 2 0 0xffffffff 0 0 + testpmd> port tm hierarchy commit 0 yes + ice_dcf_execute_virtchnl_cmd(): No response (1 times) or return failure (-5) for cmd 37 + ice_dcf_set_vf_bw(): fail to execute command VIRTCHNL_OP_DCF_CONFIG_BW + no error: (no stated reason) (error 0) + + add port tm node shaper profile 0 1 63000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800000 0 1 2 2 0 0xffffffff 0 0 + testpmd> port tm hierarchy commit 0 no + + the setting commit successfully. + +2.Min BW for the given TC must be less than that of Max BW:: + + add port tm node shaper profile 0 1 2001000 0 2000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + ice_dcf_execute_virtchnl_cmd(): No response (1 times) or return failure (-5) for cmd 37 + ice_dcf_set_vf_bw(): fail to execute command VIRTCHNL_OP_DCF_CONFIG_BW + no error: (no stated reason) (error 0) + + add port tm node shaper profile 0 1 2000000 0 2000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + + the setting commit successfully. + +3. Max BW must be less than or equal to negotiated link speed for the port +1).one iavf VF, two TCs:: + + add port tm node shaper profile 0 1 1000000000 0 12000000000 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0 + + port tm hierarchy commit 0 yes + ice_dcf_validate_tc_bw(): Total value of TC0 min bandwidth and other TCs' max bandwidth 104000000kbps should be less than port link speed 100000000kbps + +2).two iavf VF, two TCs:: + + echo 3 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs + ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2 + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + ip link set ens785f0 vf 2 mac 00:11:22:33:44:66 + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -a 18:01.2 -a 18:01.3 -- -i --txq=8 --rxq=8 --port-topology=loop --nb-cores=8 + port stop all + add port tm node shaper profile 0 1 10000000 0 1000000000 0 0 0 + add port tm node shaper profile 0 2 10000000 0 8500000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 800 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + ice_dcf_validate_tc_bw(): Total value of TC0 min bandwidth and other TCs' max bandwidth 136160000kbps should be less than port link speed 100000000kbps + no error: (no stated reason) (error 0) + +4. Max BW cannot be 0 and must be greater than or equal to Min BW + If set max BW to 0, there is not max rate limit:: + + add port tm node shaper profile 0 1 0 0 0 0 0 0 + add port tm nonleaf node 0 1000000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900000 1000000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800000 1000000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800000 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 3 800000 0 1 2 1 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + port start all + set fwd mac + start + + send two streams from IXIA, vlan=0, priority=0/3(TC0/TC1), + mac address is VF1's mac address "00:11:22:33:44:55", frame size is 1024 bytes, 100% max rate. + send each stream separately, check the TX throughput of each TC can reach linerate. + and the queue mapping is correct. + +Test case 18: negative case for req VF to update its queue to TC mapping +======================================================================== +1. DCB setting, set 3 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + +2. create 2 VFs:: + + echo 2 > /sys/bus/pci/devices/0000\:18\:00.0/sriov_numvfs + ./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 + ip link set dev ens785f0 vf 0 trust on + ip link set ens785f0 vf 1 mac 00:11:22:33:44:55 + +3. start testpmd with 100G setting:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -- -i --txq=8 --rxq=8 --port-topology=loop --nb-cores=8 + port stop all + +Subcase 1: Total number of queue pairs match to what the VF is allocated +------------------------------------------------------------------------ +1. 8 queues, only map 7 queues to TC:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + iavf_hierarchy_commit(): queue node is less than allocated queue pairs + no error: (no stated reason) (error 0) + +2. 8 queues, map 9 queues to TC:: + + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 8 700 0 1 2 0 0 0xffffffff 0 0 + num strict priorities field (node params): SP priority not supported (error 27) + +Subcase 1: Number of TCs match is less than TC enabled on the VF +---------------------------------------------------------------- +1. not all VF0 VSI nodes binded to TC:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + ice_dcf_commit_check(): Not all VFs are binded to TC2 + no error: (no stated reason) (error 0) + +2. not all VF1 VSI nodes binded to TC:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + iavf_hierarchy_commit(): Does not set VF vsi nodes to all TCs + no error: (no stated reason) (error 0) + +3. not all VF1 VSI nodes mapping to queues, set successfully:: + + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + + send TC0 and TC1 streams, the queue mapping is correct. + +Subcase 3: Number of TCs match is more than TC enabled on the VF +---------------------------------------------------------------- +The TC number should be consistent to the TC enabled by lldptool. +run the below steps sequentially. + +1. TC node number is more than TC enabled by lldptool:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 600 1000 0 1 1 -1 1 0 0 + node id: too many TCs (error 33) + +2. VF0's TC node number is more than TC enabled by lldptool:: + + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 6 600 0 1 2 2 0 0xffffffff 0 0 + parent node id: parent not exist (error 19) + +3. VF1's TC node number is more than TC enabled by lldptool:: + + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 600 1000 0 1 1 0 1 0 0 + node id: too many TCs (error 33) + +4. map the nonexist VSI node to queues:: + + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 600 0 1 2 0 0 0xffffffff 0 0 + parent node id: parent not exist (error 19) + +Subcase 4: overlap between queue to TC mapping +---------------------------------------------- +There can't be overlap between queue to TC mapping:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 800 0 1 2 0 0 0xffffffff 0 0 + node id: node id already used (error 33) + +Subcase 5: Non-contiguous TC setting in queue mapping +----------------------------------------------------- +1. set non-contiguous TC and queue mapping:: + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 yes + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 800 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 yes + port start all + set fwd mac + start + +2. send four streams from IXIA, vlan=0, priority=2/5/3/4(TC0/TC0/TC1/TC2), + mac address is VF1's mac address "00:11:22:33:44:55". + frame size is 68 bytes, each stream desired 25% max rate. + send each stream separately, check the TX throughput of each priority and queue mapping: + UP=2/5 which matches to TC0, maps to queue0-1, throughput can reach 2MBps, + UP=3 which matches to TC1, maps to queue2-3, throughput can reach 4MBps, + UP=4 which matches to TC2, maps to queue4-7. throughput can reach 4MBps. + +Test case 19: different vlan ID +=============================== + +1. DCB setting, set 3 TCs bandwidth with strict mode:: + + ./dcbgetset ens785f0 --ieee --up2tc 0,0,0,1,2,0,0,0 --tcbw 10,30,60,0,0,0,0,0 --tsa 0,0,0,0,0,0,0,0 --pfc 0,0,0,0,0,0,0,0 + ifconfig ens785f0 up + +2. start testpmd with 100G setting, add vlan filter, + then set profile and TC mapping:: + + ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-10 -n 4 -a 18:01.0,cap=dcf -a 18:01.1 -- -i --txq=8 --rxq=8 --nb-cores=8 --port-topology=loop + port stop all + vlan set filter on 1 + rx_vlan add 1 1 + rx_vlan add 2 1 + + add port tm node shaper profile 0 1 1000000 0 2000000 0 0 0 + add port tm node shaper profile 0 2 1000000 0 4000000 0 0 0 + add port tm nonleaf node 0 1000 -1 0 1 0 -1 1 0 0 + add port tm nonleaf node 0 900 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 800 1000 0 1 1 -1 1 0 0 + add port tm nonleaf node 0 700 1000 0 1 1 -1 1 0 0 + + add port tm leaf node 0 0 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 1 900 0 1 2 1 0 0xffffffff 0 0 + add port tm leaf node 0 2 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 3 800 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 4 700 0 1 2 2 0 0xffffffff 0 0 + add port tm leaf node 0 5 700 0 1 2 2 0 0xffffffff 0 0 + port tm hierarchy commit 0 no + + add port tm nonleaf node 1 1000 -1 0 1 0 0 1 0 0 + add port tm nonleaf node 1 900 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 800 1000 0 1 1 0 1 0 0 + add port tm nonleaf node 1 700 1000 0 1 1 0 1 0 0 + add port tm leaf node 1 0 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 1 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 2 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 3 900 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 4 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 5 800 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 6 700 0 1 2 0 0 0xffffffff 0 0 + add port tm leaf node 1 7 700 0 1 2 0 0 0xffffffff 0 0 + port tm hierarchy commit 1 no + port start all + set fwd mac + start + +3. send 8 streams from IXIA, mac address is VF1's mac address "00:11:22:33:44:55", + frame size is 68 bytes, each stream desired 25% max rate. + stream 0-3, vlan id=0, priority=0/1/3/4(TC0/TC0/TC1/TC2), + stream 4-5, vlan id=1, priority=0/3(TC0/TC1), + stream 6-7, vlan id=2, priority=2/4(TC0/TC2). + only send stream 0,1,4,6 synchronously, the throughput is 2MBps, mapping queue 0-3 + only send steam 2 and 5 synchronously, the throughput is 4MBps, mapping queue 4-5 + only send steam 3 and 7 synchronously, the throughput is 4MBps, mapping queue 6-7 + send all the streams synchronously, the throughput is 10MBps, queue mapping is correct. diff --git a/test_plans/index.rst b/test_plans/index.rst index 55d32976..25e9d677 100644 --- a/test_plans/index.rst +++ b/test_plans/index.rst @@ -57,6 +57,7 @@ The following are the test plans for the DPDK DTS automated test system. cvl_dcf_switch_filter_pppoe_test_plan cvl_dcf_switch_filter_gtpu_test_plan cvl_dcf_flow_priority_test_plan + cvl_dcf_qos_test_plan cvl_ecpri_test_plan cvl_fdir_test_plan cvl_ip_fragment_rte_flow_test_plan