diff mbox series

[V1,1/3] test_plans/fortville_rss_granularity_config: delete this suite

Message ID 20211115145628.111987-2-yanx.xia@intel.com (mailing list archive)
State Superseded
Headers show
Series *** delete fortville_rss_granularity_config *** | expand

Commit Message

Yan Xia Nov. 15, 2021, 2:56 p.m. UTC
delete fortville_rss_granularity_config
dpdk commit-id: a12c188b85 net/mlx5: remove unused hash list operations

---
 ...ville_rss_granularity_config_test_plan.rst | 321 ------------------
 1 file changed, 321 deletions(-)
 delete mode 100644 test_plans/fortville_rss_granularity_config_test_plan.rst
diff mbox series

Patch

diff --git a/test_plans/fortville_rss_granularity_config_test_plan.rst b/test_plans/fortville_rss_granularity_config_test_plan.rst
deleted file mode 100644
index 18592b1e..00000000
--- a/test_plans/fortville_rss_granularity_config_test_plan.rst
+++ /dev/null
@@ -1,321 +0,0 @@ 
-.. Copyright (c) <2015-2017>, Intel Corporation
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
-===================================================================
-Fortville Granularity Configuration of RSS and 32-bit GRE key Tests
-===================================================================
-
-Description
-===========
-
-This document provides test plan for testing the function of Fortville:
-
-1. Support granularity configuration of RSS
-
-   By default Fortville uses hash input set preloaded from NVM image which
-   includes all fields IPv4/v6+TCP/UDP port. Potential problem for this is
-   global configuration per device and can affect all ports. It is required
-   that hash input set can be configurable, such as using IPv4 only or IPv6
-   only or IPv4/v6+TCP/UDP.
-
-2. support 32-bit GRE keys
-
-   By default Fortville extracts only 24 bits of GRE key to FieldVector (NVGRE
-   use case) but for Telco use cases full 32-bit GRE key is needed. It is
-   required that both 24-bit and 32-bit keys for GRE should be supported. the
-   test plan is to test the API to switch between 24-bit and 32-bit keys
-
-
-Prerequisites
--------------
-
-1. Hardware:
-
-   * 1x Fortville_eagle NIC (4x 10G)
-   * 1x Fortville_spirit NIC (2x 40G)
-   * 2x Fortville_spirit_single NIC (1x 40G)
-
-2. Software:
-
-   * dpdk: http://dpdk.org/git/dpdk
-   * scapy: http://www.secdev.org/projects/scapy/
-
-3. Bind one port to DPDK driver::
-
-    ./usertools/dpdk-devbind.py -b igb_uio 05:00.0
-
-   Suppose the MAC address of the port is "00:00:00:00:01:00".
-
-
-Test Case 1: test with flow type ipv4-tcp
-=========================================
-
-1. config testpmd on DUT
-
-   1. set up testpmd with Fortville NICs::
-
-         ./testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16 --tx-offloads=0x8fff
-
-   2. Reta Configuration(optional, if not set, will use default)::
-
-         testpmd> port config 0 rss reta (hash_index,queue_id)
-
-   3. PMD fwd only receive the packets::
-
-         testpmd> set fwd rxonly
-
-   4. rss received package type configuration::
-
-         testpmd> port config all rss tcp
-
-   5. set hash function::
-
-         testpmd>set_hash_global_config 0 toeplitz ipv4-tcp enable
-
-   6. verbose configuration::
-
-          testpmd> set verbose 8
-
-   7. start packet receive::
-
-         testpmd> start
-
-2. using scapy to send packets with ipv4-tcp on tester::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src="192.168.0.1", dst="192.168.0.2")/TCP(sport=1024,dport=1025)], iface=tester_itf)
-
-   then got hash value and queue value that output from the testpmd on DUT.
-
-3. set hash input set to "none" by testpmd on dut::
-
-       testpmd> set_hash_input_set 0 ipv4-tcp none select
-
-   send packet as step 2, got hash value and queue value that output from the
-   testpmd on DUT, the values should be different from the values in step 2.
-
-4. set hash input set by testpmd on dut, enable src-ipv4 & dst-ipv4::
-
-      testpmd> set_hash_input_set 0 ipv4-tcp src-ipv4 add
-      testpmd> set_hash_input_set 0 ipv4-tcp dst-ipv4 add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   different from the values in step 2.
-
-5. set hash input set by testpmd on dut, enable src-ipv4, dst-ipv4, tcp-src-port, tcp-dst-port::
-
-      testpmd> set_hash_input_set 0 ipv4-tcp tcp-src-port add
-      testpmd> set_hash_input_set 0 ipv4-tcp tcp-dst-port add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values
-   should be different with the values from step 3 & step 4, should be same as step 2.
-
-6. set hash input set by testpmd on dut, enable tcp-src-port, tcp-dst-port::
-
-      testpmd> set_hash_input_set 0 ipv4-tcp none select
-      testpmd> set_hash_input_set 0 ipv4-tcp tcp-src-port add
-      testpmd> set_hash_input_set 0 ipv4-tcp tcp-dst-port add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   should be different with the values from step2 & step 3 & step 4 & step 5.
-
-   So it can be approved that with flow type ipv4-tcp, rss hash can be calculated by only included IPv4 fields
-   or only included TCP fields or both IPv4+TCP fields.
-
-
-Test Case 2: test with flow type ipv4-udp
-=========================================
-
-1. config testpmd on DUT
-
-   1. set up testpmd with Fortville NICs::
-
-         ./testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16 --tx-offloads=0x8fff
-
-   2. Reta Configuration(optional, if not set, will use default)::
-
-          testpmd> port config 0 rss reta (hash_index,queue_id)
-
-   3. PMD fwd only receive the packets::
-
-         testpmd> set fwd rxonly
-
-   4. rss received package type configuration::
-
-         testpmd> port config all rss udp
-
-   5. set hash function::
-
-         testpmd>set_hash_global_config 0 toeplitz ipv4-udp enable
-
-   6. verbose configuration::
-
-          testpmd> set verbose 8
-
-   7. start packet receive::
-
-          testpmd> start
-
-2. using scapy to send packets with ipv4-udp on tester::
-
-
-      sendp([Ether(dst="00:00:00:00:01:00")/IP(src="192.168.0.1", dst="192.168.0.2")/UDP(sport=1024,dport=1025)], iface=tester_itf))
-
-   then got hash value and queue value that output from the testpmd on DUT.
-
-3. set hash input set to "none" by testpmd on dut::
-
-       testpmd> set_hash_input_set 0 ipv4-udp none select
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   different from the values in step 2.
-
-4. set hash input set by testpmd on dut, enable src-ipv4 and dst-ipv4::
-
-      testpmd> set_hash_input_set 0 ipv4-udp src-ipv4 add
-      testpmd> set_hash_input_set 0 ipv4-udp dst-ipv4 add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   different from the values in step 2 & step 3.
-
-5. set hash input set by testpmd on dut, enable src-ipv4, dst-ipv4, udp-src-port, udp-dst-port::
-
-      testpmd> set_hash_input_set 0 ipv4-udp udp-src-port add
-      testpmd> set_hash_input_set 0 ipv4-udp udp-dst-port add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   should be different with the values from step 3 & step 4, should be same as step 2.
-
-6. set hash input set by testpmd on dut, enable udp-src-port, udp-dst-port::
-
-      testpmd> set_hash_input_set 0 ipv4-udp none select
-      testpmd> set_hash_input_set 0 ipv4-udp udp-src-port add
-      testpmd> set_hash_input_set 0 ipv4-udp udp-dst-port add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   should be different with the values from step2 & step 3 & step 4 & step 5.
-
-   So it can be approved that with flow type ipv4-udp, rss hash can be calculated by only included IPv4 fields
-   or only included UDP fields or both IPv4+UDP fields.
-
-Test Case 3: test with flow type ipv6-tcp
-=========================================
-
-test method is same as Test Case 1, but it need change all ipv4 to ipv6,
-and using scapy to send packets with ipv6-tcp on tester::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="3ffe:2501:200:1fff::1", dst="3ffe:2501:200:3::2")/TCP(sport=1024,dport=1025)], iface=tester_itf)
-
-and the test result should be same as Test Case 1.
-
-
-Test Case 4: test with flow type ipv6-udp
-=========================================
-
-test method is same as Test Case 2, but it need change all ipv4 to ipv6,
-and using scapy to send packets with ipv6-udp on tester::
-
-   sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="3ffe:2501:200:1fff::1", dst="3ffe:2501:200:3::2")/UDP(sport=1024,dport=1025)], iface=tester_itf)
-
-and the test result should be same as Test Case 2.
-
-
-Test Case 6: 32-bit GRE keys and 24-bit GRE keys test
-=====================================================
-
-1. config testpmd on DUT
-
-   1. set up testpmd with Fortville NICs::
-
-         ./testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16 --tx-offloads=0x8fff
-
-   2. Reta Configuration(optional, if not set, will use default)::
-
-         testpmd> port config 0 rss reta (hash_index,queue_id)
-
-   3. PMD fwd only receive the packets::
-
-         testpmd> set fwd rxonly
-
-   4. rss received package type configuration::
-
-         testpmd> port config all rss all
-
-   5. set hash function::
-
-         testpmd>set_hash_global_config 0 toeplitz ipv4-other enable
-
-   6. verbose configuration::
-
-         testpmd> set verbose 8
-
-   7. start packet receive::
-
-         testpmd> start
-
-2. using scapy to send packets with GRE header on tester::
-
-      sendp([Ether(dst="00:00:00:00:01:00")/IP(src="192.168.0.1",dst="192.168.0.2",proto=47)/GRE(key_present=1,proto=2048,key=67108863)/IP()], iface=tester_itf)
-
-   then got hash value and queue value that output from the testpmd on DUT.
-
-3. set hash input set to "none" by testpmd on dut::
-
-      testpmd> set_hash_input_set 0 ipv4-other none select
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the value should be
-   different with the values in step 2.
-
-4. set hash input set by testpmd on dut, enable src-ipv4, dst-ipv4::
-
-      testpmd> set_hash_input_set 0 ipv4-other src-ipv4 add
-      testpmd> set_hash_input_set 0 ipv4-other dst-ipv4 add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the value should be
-   same with the values in step 2.
-
-5. set hash input set and gre-key-len=3 by testpmd on dut, enable gre-key::
-
-      testpmd> global_config 0 gre-key-len 3
-      testpmd> set_hash_input_set 0 ipv4-other gre-key add
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   different with the values in step 2 & step3.
-
-6. set gre-key-len=4 by testpmd on dut, enable gre-key::
-
-      testpmd> global_config 0 gre-key-len 4
-
-   send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the values should be
-   different with the values in step 2 & step3 & step 5.
-
-   So with gre-key-len=3 (24bit gre key) or gre-key-len=4 (32bit gre key), different rss hash value and queue value
-   can be got, it can be proved that 32bit & 24bit gre key are supported by Fortville.