diff --git a/test_plans/queue_start_stop_test_plan.rst b/test_plans/queue_start_stop_test_plan.rst
index 3a2a7baf..82e35280 100644
--- a/test_plans/queue_start_stop_test_plan.rst
+++ b/test_plans/queue_start_stop_test_plan.rst
@@ -53,7 +53,7 @@ Assume port A and B are connected to the remote ports, e.g. packet generator.
 To run the testpmd application in linuxapp environment with 4 lcores,
 4 channels with other default parameters in interactive mode::
 
-        $ ./testpmd -c 0xf -n 4 -- -i
+        $ ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 -- -i
 
 Test Case: queue start/stop
 ---------------------------
diff --git a/test_plans/rss_to_rte_flow_test_plan.rst b/test_plans/rss_to_rte_flow_test_plan.rst
index f770d975..cb006d80 100644
--- a/test_plans/rss_to_rte_flow_test_plan.rst
+++ b/test_plans/rss_to_rte_flow_test_plan.rst
@@ -84,7 +84,7 @@ Test case: set rss types on two ports (I40E)
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -210,7 +210,7 @@ Test case: set rss queues on two ports (I40E)
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -332,7 +332,7 @@ Test case: set rss types and rss queues on two ports (I40E)
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=8 --txq=8 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=8 --txq=8 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -399,7 +399,7 @@ Test case: disable rss in command-line (I40E)
 
 1. Start the testpmd::
 
-    ./testpmd -c 0x3 -n 4 -- -i --rxq=8 --txq=8 --disable-rss --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 0x3 -n 4 -- -i --rxq=8 --txq=8 --disable-rss --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -468,7 +468,7 @@ Only i40e support key and key_len setting.
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -586,7 +586,7 @@ Test case: Flow directory rule and RSS rule combination (I40E)
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -616,7 +616,7 @@ Test case: Set queue-region with rte_flow api (I40E)
  
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=16 --rxq=16 --txq=16 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=16 --rxq=16 --txq=16 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -673,7 +673,7 @@ Test case: Set queue region in rte_flow with invalid parameter (I40E)
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=16 --rxq=16 --txq=16 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=16 --rxq=16 --txq=16 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -718,7 +718,7 @@ be implemented with fortville.
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
     testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end actions rss types ipv4-udp end queues end / end
     testpmd> set fwd rxonly
     testpmd> set verbose 1
@@ -755,7 +755,7 @@ Test case: disable and enable rss
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -797,7 +797,7 @@ Test case: enable ipv4-udp rss
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=4 --txq=4 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -826,7 +826,7 @@ Test case: set rss valid/invalid queue rule
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -879,7 +879,7 @@ Test case: Different packet types
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -914,7 +914,7 @@ Test case: disable rss in command-line
 
 1. Start the testpmd::
 
-    ./testpmd -c 0x3 -n 4 -- -i --rxq=8 --txq=8 --disable-rss --port-topology=chained
+    ./<build_target>/app/dpdk-testpmd -c 0x3 -n 4 -- -i --rxq=8 --txq=8 --disable-rss --port-topology=chained
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
@@ -950,7 +950,7 @@ Test case: Flow directory rule and RSS rule combination
 
 1. Start the testpmd::
 
-    ./testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
+    ./<build_target>/app/dpdk-testpmd -c 1ffff -n 4 -- -i --nb-cores=8 --rxq=16 --txq=16 --pkt-filter-mode=perfect
     testpmd> set fwd rxonly
     testpmd> set verbose 1
     testpmd> start
diff --git a/test_plans/rteflow_priority_test_plan.rst b/test_plans/rteflow_priority_test_plan.rst
index 4ca1c22e..405a1bf1 100644
--- a/test_plans/rteflow_priority_test_plan.rst
+++ b/test_plans/rteflow_priority_test_plan.rst
@@ -71,7 +71,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
@@ -90,7 +90,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=0 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=0 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
@@ -119,7 +119,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
     rx_vxlan_port add 4789 0
@@ -184,7 +184,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
@@ -206,7 +206,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
@@ -232,7 +232,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
@@ -257,7 +257,7 @@ Patterns in this case:
 
 #. Start the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0,pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
@@ -298,7 +298,7 @@ Patterns in this case:
 
 #. Restart the ``testpmd`` application as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -a 0000:af:00.0, pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:af:00.0, pipeline-mode-support=1 --log-level="ice,7" -- -i --txq=8 --rxq=8
     set fwd rxonly
     set verbose 1
 
diff --git a/test_plans/runtime_vf_queue_number_kernel_test_plan.rst b/test_plans/runtime_vf_queue_number_kernel_test_plan.rst
index 5c8bab3e..d4f01a3b 100644
--- a/test_plans/runtime_vf_queue_number_kernel_test_plan.rst
+++ b/test_plans/runtime_vf_queue_number_kernel_test_plan.rst
@@ -127,7 +127,7 @@ Test Case 1: set valid VF queue number in testpmd command-line options
 
 1. Start VF testpmd with "--rxq=[rxq] --txq=[txq]", and random valid values from 1 to 16, take 3 for example::
 
-     ./testpmd -c 0xf0 -n 4 -a 00:04.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 00:04.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i --rxq=3 --txq=3
 
 2. Configure vf forwarding prerequisits and start forwarding::
@@ -169,7 +169,7 @@ Test case 2: set invalid VF queue number in testpmd command-line options
 
 1. Start VF testpmd with "--rxq=0 --txq=0" ::
 
-     ./testpmd -c 0xf0 -n 4 -a 00:04.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 00:04.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i --rxq=0 --txq=0
 
    Verify testpmd exited with error as below::
@@ -178,7 +178,7 @@ Test case 2: set invalid VF queue number in testpmd command-line options
 
 2. Start VF testpmd with "--rxq=17 --txq=17" ::
 
-    ./testpmd -c 0xf0 -n 4 -a 00:04.0 --file-prefix=test2 \
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 00:04.0 --file-prefix=test2 \
     --socket-mem 1024,1024 -- -i --rxq=17 --txq=17
 
    Verify testpmd exited with error as below::
@@ -190,7 +190,7 @@ Test case 3: set valid VF queue number with testpmd function command
 
 1. Start VF testpmd without setting "rxq" and "txq"::
 
-    ./testpmd -c 0xf0 -n 4 -a 00:04.0 --socket-mem 1024,1024 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 00:04.0 --socket-mem 1024,1024 -- -i
 
 2. Configure vf forwarding prerequisits and start forwarding::
 
@@ -211,7 +211,7 @@ Test case 4: set invalid VF queue number with testpmd function command
 
 1. Start VF testpmd without setting "rxq" and "txq"::
 
-     ./testpmd -c 0xf0 -n 4 -a 00:04.0 --socket-mem 1024,1024 -- -i
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 00:04.0 --socket-mem 1024,1024 -- -i
 
 2. Set rx queue number and tx queue number with 0 ::
 
diff --git a/test_plans/runtime_vf_queue_number_test_plan.rst b/test_plans/runtime_vf_queue_number_test_plan.rst
index b0c2c3a9..c4aaaed0 100644
--- a/test_plans/runtime_vf_queue_number_test_plan.rst
+++ b/test_plans/runtime_vf_queue_number_test_plan.rst
@@ -130,14 +130,14 @@ Test case 1: reserve valid vf queue number
 
 1. Start PF testpmd with random queue-num-per-vf in [1, 2, 4, 8 ,16], for example, we use 4 as the reserved vf queue numbers::
 
-     ./testpmd -c f -n 4 -a 18:00.0,queue-num-per-vf=4 \
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0,queue-num-per-vf=4 \
      --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
    Note testpmd can be started normally without any wrong or error.
 
 2. Start VF testpmd::
 
-     ./testpmd -c 0xf0 -n 4 -a 03:00.0 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 03:00.0 \
      --file-prefix=test2 --socket-mem 1024,1024 -- -i
 
 3. VF request a queue number that is equal to reserved queue number, and we can not find VF reset while confiuring it::
@@ -195,7 +195,7 @@ Test case 2: reserve invalid VF queue number
 
 1. Start PF testpmd with random queue-num-per-vf in [0, 3, 5-7 , 9-15, 17], for example, we use 0 as the reserved vf queue numbers::
 
-     ./testpmd -c f -n 4 -a 18:00.0,queue-num-per-vf=0 \
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0,queue-num-per-vf=0 \
      --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
 2. Verify testpmd started with logs as below::
@@ -207,12 +207,12 @@ Test case 3: set valid VF queue number in testpmd command-line options
 
 1. Start PF testpmd::
 
-      ./testpmd -c f -n 4 -a 18:00.0 \
+      ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0 \
       --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
 2. Start VF testpmd with "--rxq=[rxq] --txq=[txq]", and random valid values from 1 to 16, take 3 for example::
 
-     ./testpmd -c 0xf0 -n 4 -a 18:02.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 18:02.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i --rxq=3 --txq=3
 
 3. Configure vf forwarding prerequisits and start forwarding::
@@ -254,12 +254,12 @@ Test case 4: set invalid VF queue number in testpmd command-line options
 
 1. Start PF testpmd::
 
-     ./testpmd -c f -n 4 -a 18:00.0 \
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0 \
      --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
 2. Start VF testpmd with "--rxq=0 --txq=0" ::
 
-     ./testpmd -c 0xf0 -n 4 -a 18:02.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 18:02.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i --rxq=0 --txq=0
 
    Verify testpmd exited with error as below::
@@ -268,7 +268,7 @@ Test case 4: set invalid VF queue number in testpmd command-line options
 
 3. Start VF testpmd with "--rxq=17 --txq=17" ::
 
-     ./testpmd -c 0xf0 -n 4 -a 18:02.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 18:02.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i --rxq=17 --txq=17
 
    Verify testpmd exited with error as below::
@@ -280,12 +280,12 @@ Test case 5: set valid VF queue number with testpmd function command
 
 1. Start PF testpmd::
 
-     ./testpmd -c f -n 4 -a 18:00.0 \
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0 \
      --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
 2. Start VF testpmd without setting "rxq" and "txq"::
 
-     ./testpmd -c 0xf0 -n 4 -a 05:02.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 05:02.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i
 
 3. Configure vf forwarding prerequisits and start forwarding::
@@ -307,12 +307,12 @@ Test case 6: set invalid VF queue number with testpmd function command
 
 1. Start PF testpmd::
 
-     ./testpmd -c f -n 4 -a 18:00.0 \
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0 \
      --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
 2. Start VF testpmd without setting "rxq" and "txq"::
 
-     ./testpmd -c 0xf0 -n 4 -a 05:02.0 --file-prefix=test2 \
+     ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 -a 05:02.0 --file-prefix=test2 \
      --socket-mem 1024,1024 -- -i
 
 
@@ -344,7 +344,7 @@ Test case 7: Reserve VF queue number when VF bind to kernel driver
 
 2. Reserve VF queue number ::
 
-     ./testpmd -c f -n 4 -a 18:00.0,queue-num-per-vf=2 \
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 18:00.0,queue-num-per-vf=2 \
      --file-prefix=test1 --socket-mem 1024,1024 -- -i
 
 3. Check the VF0 rxq and txq number is 2::
diff --git a/test_plans/rxtx_callbacks_test_plan.rst b/test_plans/rxtx_callbacks_test_plan.rst
index 941c2097..ea88c5c9 100644
--- a/test_plans/rxtx_callbacks_test_plan.rst
+++ b/test_plans/rxtx_callbacks_test_plan.rst
@@ -46,11 +46,16 @@ prior to transmission to calculate the elapsed time, in CPU cycles.
 Running the Application
 =======================
 
-Set ``CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y`` in config/common_base.
+Build dpdk and examples=rxtx_callbacks:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=rxtx_callbacks <build_target>
+   ninja -C <build_target>
 
 To run the example in a ``linuxapp`` environment::
 
-    ./build/rxtx_callbacks -c 2 -n 4
+    ./<build_target>/examples/dpdk-rxtx_callbacks -c 2 -n 4
 
 Refer to *DPDK Getting Started Guide* for general information on running
 applications and the Environment Abstraction Layer (EAL) options.
@@ -60,7 +65,7 @@ Test Case:rxtx callbacks
 
 Run the example::
 
-     ./examples/rxtx_callbacks/build/rxtx_callbacks -c 2 -n 4
+     ./<build_target>/examples/dpdk-rxtx_callbacks -c 2 -n 4
 
 waked up:::
 
diff --git a/test_plans/rxtx_offload_test_plan.rst b/test_plans/rxtx_offload_test_plan.rst
index 9d1029ab..172bb9cd 100644
--- a/test_plans/rxtx_offload_test_plan.rst
+++ b/test_plans/rxtx_offload_test_plan.rst
@@ -113,7 +113,7 @@ Test case: Rx offload per-port setting in command-line
 
 1. Enable rx cksum in command-line::
 
-    ./testpmd -c f -n 4 -- -i --rxq=4 --txq=4 --enable-rx-cksum
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4 --enable-rx-cksum
     testpmd> set fwd csum
     testpmd> set verbose 1
     testpmd> show port 0 rx_offload configuration
@@ -173,7 +173,7 @@ Test case: NNT Rx offload per-queue setting
 
 1. Start testpmd::
 
-    ./testpmd -c f -n 4 -- -i --rxq=4 --txq=4
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4
     testpmd> set fwd mac
     testpmd> set verbose 1
     testpmd> show port info all
@@ -287,7 +287,7 @@ Test case: Tx offload per-port setting
 
 1. Start testpmd::
 
-    ./testpmd -c 0x6 -n 4  -- -i --rxq=4 --txq=4 --port-topology=loop
+    ./<build_target>/app/dpdk-testpmd -c 0x6 -n 4  -- -i --rxq=4 --txq=4 --port-topology=loop
     testpmd> set fwd txonly
     testpmd> set verbose 1
     testpmd> show port 0 tx_offload configuration
@@ -346,7 +346,7 @@ Test case: Tx offload per-port setting in command-line
 
 1. Start testpmd with "--tx-offloads"::
 
-    ./testpmd -c 0xf -n 4  -- -i --rxq=4 --txq=4 --port-topology=loop --tx-offloads=0x0001
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4  -- -i --rxq=4 --txq=4 --port-topology=loop --tx-offloads=0x0001
     testpmd> show port 0 tx_offload configuration
     Tx Offloading Configuration of port 0 :
       Port : VLAN_INSERT
@@ -446,7 +446,7 @@ Test case: Tx offload checksum
 
 1. Set checksum forward mode::
 
-    ./testpmd -c f -n 4 -- -i --rxq=4 --txq=4
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4
     testpmd> set fwd csum
     testpmd> set verbose 1
     testpmd> show port 0 tx_offload configuration
@@ -519,7 +519,7 @@ Test case: FVL Tx offload per-queue setting
 
 1. Start testpmd and get the tx_offload capability and configuration::
 
-    ./testpmd -c f -n 4 -- -i --rxq=4 --txq=4
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4
     testpmd> show port 0 tx_offload capabilities
     Tx Offloading Capabilities of port 0 :
       Per Queue : MBUF_FAST_FREE
@@ -604,7 +604,7 @@ Test case: Tx offload multi_segs setting
 
 1. Start testpmd with "--tx-offloads=0x00008000" to enable tx_offload multi_segs ::
 
-    ./testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4  -- -i --tx-offloads==0x00008000
     testpmd> show port 0 tx_offload configuration
     Tx Offloading Configuration of port 0 :
       Port : MULTI_SEGS
@@ -648,7 +648,7 @@ Test case: Tx offload multi_segs setting
 
 4. Start testpmd again without "--tx-offloads", check multi-segs is disabled by default::
 
-    ./testpmd -c 0xf -n 4  -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4  -- -i
     testpmd> show port 0 tx_offload configuration
     No MULTI_SEGS in Tx Offloading Configuration of ports
 
diff --git a/test_plans/scatter_test_plan.rst b/test_plans/scatter_test_plan.rst
index 901c6dc4..7841a2a7 100644
--- a/test_plans/scatter_test_plan.rst
+++ b/test_plans/scatter_test_plan.rst
@@ -101,7 +101,7 @@ Assuming that ports ``0`` and ``1`` of the test target are directly connected
 to a Traffic Generator, launch the ``testpmd`` application with the following
 arguments::
 
-  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4 -- -i --mbcache=200 \
+  ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x6 -n 4 -- -i --mbcache=200 \
   --mbuf-size=2048 --portmask=0x1 --max-pkt-len=9000 --port-topology=loop \
   --tx-offloads=DEV_TX_OFFLOAD_MULTI_SEGS
 
diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst
index 1e6cd2e0..cb78d192 100644
--- a/test_plans/vdev_primary_secondary_test_plan.rst
+++ b/test_plans/vdev_primary_secondary_test_plan.rst
@@ -143,7 +143,7 @@ SW preparation: Change one line of the symmetric_mp sample and rebuild::
 
 1. Bind one port to vfio-pci, launch testpmd by below command::
 
-    ./testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1'  -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+    ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1'  -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
     testpmd>set fwd txonly
     testpmd>start
 
@@ -181,7 +181,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test
 
 1. Launch testpmd by below command::
 
-    ./testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1'  -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+    ./<build_target>/app/dpdk-testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1'  -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
     testpmd>set fwd txonly
     testpmd>start
 
diff --git a/test_plans/veb_switch_test_plan.rst b/test_plans/veb_switch_test_plan.rst
index 1d7d11c2..bf2e1cd0 100644
--- a/test_plans/veb_switch_test_plan.rst
+++ b/test_plans/veb_switch_test_plan.rst
@@ -111,7 +111,7 @@ Details:
 
 1. In VF1, run testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem 1024,1024
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 --socket-mem 1024,1024
     -a 05:02.0 --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
     testpmd>set fwd txonly
     testpmd>set promisc all off
@@ -119,7 +119,7 @@ Details:
 
    In VF2, run testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xa -n 4 --socket-mem 1024,1024
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xa -n 4 --socket-mem 1024,1024
     -a 05:02.1 --file-prefix=test2 -- -i --crc-strip
     testpmd>set fwd rxonly
     testpmd>set promisc all off
@@ -139,7 +139,7 @@ Details:
 
 1. In VF1, run testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem 1024,1024
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 --socket-mem 1024,1024
     -a 05:02.0 --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
     testpmd>set fwd mac
     testpmd>set promisc all off
@@ -147,7 +147,7 @@ Details:
 
    In VF2, run testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xa -n 4 --socket-mem 1024,1024
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xa -n 4 --socket-mem 1024,1024
     -a 05:02.1 --file-prefix=test2 -- -i --crc-strip
     testpmd>set fwd rxonly
     testpmd>set promisc all off
@@ -174,7 +174,7 @@ Details:
 
 2. In VF1, run testpmd::
 
-    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:02.0
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:02.0
     --file-prefix=test1 -- -i --crc-strip --eth-peer=0,00:11:22:33:44:12
     testpmd>set fwd mac
     testpmd>set promisc all off
@@ -182,7 +182,7 @@ Details:
 
    In VF2, run testpmd::
 
-    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.1
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.1
     --file-prefix=test2 -- -i --crc-strip
     testpmd>set fwd rxonly
     testpmd>set promisc all off
@@ -216,14 +216,14 @@ Details:
 1. vf->pf
    PF, launch testpmd::
 
-    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i
     testpmd>set fwd rxonly
     testpmd>set promisc all off
     testpmd>start
 
    VF1, run testpmd::
 
-    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i --eth-peer=0,pf_mac_addr
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i --eth-peer=0,pf_mac_addr
     testpmd>set fwd txonly
     testpmd>set promisc all off
     testpmd>start
@@ -234,14 +234,14 @@ Details:
 2. pf->vf
    PF, launch testpmd::
 
-    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i --eth-peer=0,vf1_mac_addr
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i --eth-peer=0,vf1_mac_addr
     testpmd>set fwd txonly
     testpmd>set promisc all off
     testpmd>start
 
    VF1, run testpmd::
 
-    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i
     testpmd>mac_addr add 0 vf1_mac_addr
     testpmd>set fwd rxonly
     testpmd>set promisc all off
@@ -253,14 +253,14 @@ Details:
 3. tester->vf
    PF, launch testpmd::
 
-    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i
     testpmd>set fwd mac
     testpmd>set promisc all off
     testpmd>start
 
    VF1, run testpmd::
 
-    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i
     testpmd>mac_addr add 0 vf1_mac_addr
     testpmd>set fwd rxonly
     testpmd>set promisc all off
@@ -273,19 +273,19 @@ Details:
 4. vf1->vf2
    PF, launch testpmd::
 
-    ./testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 --socket-mem 1024,1024 -a 0000:05:00.0 --file-prefix=test1 -- -i
     testpmd>set promisc all off
 
    VF1, run testpmd::
 
-    ./testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i --eth-peer=0,vf2_mac_addr
+    ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 --socket-mem 1024,1024 -a 0000:05:02.0 --file-prefix=test2 -- -i --eth-peer=0,vf2_mac_addr
     testpmd>set fwd txonly
     testpmd>set promisc all off
     testpmd>start
 
    VF2, run testpmd::
 
-    ./testpmd -c 0xf00 -n 4 --socket-mem 1024,1024 -a 0000:05:02.1 --file-prefix=test3 -- -i
+    ./<build_target>/app/dpdk-testpmd -c 0xf00 -n 4 --socket-mem 1024,1024 -a 0000:05:02.1 --file-prefix=test3 -- -i
     testpmd>mac_addr add 0 vf2_mac_addr
     testpmd>set fwd rxonly
     testpmd>set promisc all off
diff --git a/test_plans/vf_daemon_test_plan.rst b/test_plans/vf_daemon_test_plan.rst
index 07543c9d..cb7fb41d 100644
--- a/test_plans/vf_daemon_test_plan.rst
+++ b/test_plans/vf_daemon_test_plan.rst
@@ -87,7 +87,7 @@ Prerequisites
 
 5. Start testpmd on host and vm0 in chained port topology::
 
-        ./testpmd -c f -n 4 -- -i --port-topology=chained --tx-offloads=0x8fff
+        ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained --tx-offloads=0x8fff
 
 
 Test Case 1: Set VLAN insert for VF from PF
diff --git a/test_plans/vf_jumboframe_test_plan.rst b/test_plans/vf_jumboframe_test_plan.rst
index 2f4cae3d..f7b480a2 100644
--- a/test_plans/vf_jumboframe_test_plan.rst
+++ b/test_plans/vf_jumboframe_test_plan.rst
@@ -85,7 +85,7 @@ Prerequisites
 
 5. Start testpmd, set it in mac forward mode::
 
-      testpmd -c 0x0f-- -i --portmask=0x1 \
+      ./<build_target>/app/dpdk-testpmd -c 0x0f-- -i --portmask=0x1 \
         --tx-offloads=0x8fff --max-pkt-len=9000--port-topology=loop
       testpmd> set fwd mac
       testpmd> start
diff --git a/test_plans/vf_kernel_test_plan.rst b/test_plans/vf_kernel_test_plan.rst
index 5e42b8b3..f711f54a 100644
--- a/test_plans/vf_kernel_test_plan.rst
+++ b/test_plans/vf_kernel_test_plan.rst
@@ -81,7 +81,7 @@ Steps:
 
 1. Enable multi-queues to start DPDK PF::
 
-    ./testpmd -c f -n 4 -- -i --rxq=4 --txq=4
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --rxq=4 --txq=4
 
 2. Link up kernel VF and expect VF link up
 
diff --git a/test_plans/vf_l3fwd_test_plan.rst b/test_plans/vf_l3fwd_test_plan.rst
index 9fb97cc2..0e3d0541 100644
--- a/test_plans/vf_l3fwd_test_plan.rst
+++ b/test_plans/vf_l3fwd_test_plan.rst
@@ -91,6 +91,13 @@ Setup overview
 
 Set up topology as above based on the NIC used.
 
+Build dpdk and examples=l3fwd:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=l3fwd <build_target>
+   ninja -C <build_target>
+
 Test Case 1: Measure performance with kernel PF & dpdk VF
 =========================================================
 
@@ -111,7 +118,7 @@ take XL710 for example::
 
 4, Start dpdk l3fwd with 1:1 matched cores and queues::
 
-  ./examples/l3fwd/build/l3fwd -c 0xf -n 4 -- -p 0x3 --config '(0,0,0),(1,0,1),(0,1,2),(1,1,3)'
+  ./<build_target>/examples/dpdk-l3fwd -c 0xf -n 4 -- -p 0x3 --config '(0,0,0),(1,0,1),(0,1,2),(1,1,3)'
 
 5, Send packet with frame size from 64bytes to 1518bytes with ixia traffic generator,
 make sure your traffic configuration meets LPM rules, and will go to all queues, all ports.
@@ -150,13 +157,13 @@ take XL710 for example::
 
 3, Start testpmd and set vfs mac address::
 
-  ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3 -n 4 --socket-mem=1024,1024 --file-prefix=pf -b 0000:18:02.0 -b 0000:18:06.0 -- -i
+  ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 --socket-mem=1024,1024 --file-prefix=pf -b 0000:18:02.0 -b 0000:18:06.0 -- -i
   testpmd>set vf mac addr 0 0 00:12:34:56:78:01
   testpmd>set vf mac addr 1 0 00:12:34:56:78:02
 
 4, Start dpdk l3fwd with 1:1 matched cores and queues::
 
-  ./examples/l3fwd/build/l3fwd -c 0x3c -n 4 -a 0000:18:02.0 -a 0000:18:06.0 -- -p 0x3 --config '(0,0,2),(1,0,3),(0,1,4),(1,1,5)'
+  ./<build_target>/examples/dpdk-l3fwd -c 0x3c -n 4 -a 0000:18:02.0 -a 0000:18:06.0 -- -p 0x3 --config '(0,0,2),(1,0,3),(0,1,4),(1,1,5)'
 
 5, Send packet with frame size from 64bytes to 1518bytes with ixia traffic generator,
 make sure your traffic configuration meets LPM rules, and will go to all queues, all ports.
diff --git a/test_plans/vf_single_core_perf_test_plan.rst b/test_plans/vf_single_core_perf_test_plan.rst
index 53cf304a..8c4ff727 100644
--- a/test_plans/vf_single_core_perf_test_plan.rst
+++ b/test_plans/vf_single_core_perf_test_plan.rst
@@ -86,7 +86,7 @@ Test Case : Vf Single Core Performance Measurement
 
 4. Start testpmd::
 
-    ./dpdk-testpmd -l 28,29 -n 4 -- -i --portmask=0x3  --txd=512 --rxd=512 \
+    ./<build_target>/app/dpdk-testpmd -l 28,29 -n 4 -- -i --portmask=0x3  --txd=512 --rxd=512 \
     --txq=2 --rxq=2 --nb-cores=1
 
     testpmd> set fwd mac
diff --git a/test_plans/virtio_user_as_exceptional_path_test_plan.rst b/test_plans/virtio_user_as_exceptional_path_test_plan.rst
index 2dffa877..97052d9e 100644
--- a/test_plans/virtio_user_as_exceptional_path_test_plan.rst
+++ b/test_plans/virtio_user_as_exceptional_path_test_plan.rst
@@ -74,7 +74,7 @@ Flow:tap0-->vhost-net-->virtio_user-->nic0-->nic1
 3. Bind nic0 to vfio-pci and launch the virtio_user with testpmd::
 
     ./dpdk-devbind.py -b vfio-pci xx:xx.x        # xx:xx.x is the pci addr of nic0
-    ./testpmd -c 0xc0000 -n 4 --file-prefix=test2 \
+    ./<build_target>/app/dpdk-testpmd -c 0xc0000 -n 4 --file-prefix=test2 \
     --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024 -- -i --rxd=1024 --txd=1024
     testpmd>set fwd csum
     testpmd>stop
@@ -126,7 +126,7 @@ Flow: tap0<-->vhost-net<-->virtio_user<-->nic0<-->TG
 2. Bind the physical port to vfio-pci, launch testpmd with one queue for virtio_user::
 
     ./dpdk-devbind.py -b vfio-pci xx:xx.x        # xx:xx.x is the pci addr of nic0
-    ./testpmd -l 1-2 -n 4  --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=1 -- -i --rxd=1024 --txd=1024
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4  --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=1 -- -i --rxd=1024 --txd=1024
 
 3. Check if there is a tap device generated::
 
@@ -156,7 +156,7 @@ Flow: tap0<-->vhost-net<-->virtio_user<-->nic0<-->TG
 2. Bind the physical port to vfio-pci, launch testpmd with two queues for virtio_user::
 
     ./dpdk-devbind.py -b vfio-pci xx:xx.x        # xx:xx.x is the pci addr of nic0
-    ./testpmd -l 1-2 -n 4  --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=2 -- -i --rxd=1024 --txd=1024 --txq=2 --rxq=2 --nb-cores=1
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4  --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=2 -- -i --rxd=1024 --txd=1024 --txq=2 --rxq=2 --nb-cores=1
 
 3. Check if there is a tap device generated::
 
diff --git a/test_plans/virtio_user_for_container_networking_test_plan.rst b/test_plans/virtio_user_for_container_networking_test_plan.rst
index d28b30a1..3ec1d101 100644
--- a/test_plans/virtio_user_for_container_networking_test_plan.rst
+++ b/test_plans/virtio_user_for_container_networking_test_plan.rst
@@ -72,12 +72,12 @@ Test Case 1: packet forward test for container networking
 
 2. Bind one port to vfio-pci, launch vhost::
 
-    ./testpmd -l 1-2 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
 
 2. Start a container instance with a virtio-user port::
 
     docker run -i -t --privileged -v /root/dpdk/vhost-net:/tmp/vhost-net -v /mnt/huge:/dev/hugepages \
-    -v /root/dpdk:/root/dpdk dpdk_image ./root/dpdk/x86_64-native-linuxapp-gcc/app/testpmd -l 3-4 -n 4 -m 1024 --no-pci --file-prefix=container \
+    -v /root/dpdk:/root/dpdk dpdk_image ./root/dpdk/x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-pci --file-prefix=container \
     --vdev=virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net -- -i
 
 3. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check virtio could receive and fwd packets correctly in container::
@@ -94,12 +94,12 @@ Test Case 2: packet forward with multi-queues for container networking
 
 2. Bind one port to vfio-pci, launch vhost::
 
-    ./testpmd -l 1-3 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2
+    ./<build_target>/app/dpdk-testpmd -l 1-3 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2
 
 2. Start a container instance with a virtio-user port::
 
     docker run -i -t --privileged -v /root/dpdk/vhost-net:/tmp/vhost-net -v /mnt/huge:/dev/hugepages \
-    -v /root/dpdk:/root/dpdk dpdk_image ./root/dpdk/x86_64-native-linuxapp-gcc/app/testpmd -l 4-6 -n 4 -m 1024 --no-pci --file-prefix=container \
+    -v /root/dpdk:/root/dpdk dpdk_image ./root/dpdk/x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4-6 -n 4 -m 1024 --no-pci --file-prefix=container \
     --vdev=virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=2 -- -i --rxq=2 --txq=2 --nb-cores=2
 
 3. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check virtio could receive and fwd packets in container with two queues::
