diff mbox series

[V1,2/4] test_plans/*: modify test plan to adapt meson build

Message ID 20220122182037.921953-3-yux.jiang@intel.com (mailing list archive)
State Accepted
Headers show
Series test_plans/*: modify test plan to adapt meson build | expand

Commit Message

Jiang, YuX Jan. 22, 2022, 6:20 p.m. UTC
test_plans/*: modify test plan to adapt meson build

Signed-off-by: Yu Jiang <yux.jiang@intel.com>
---
 test_plans/l2tp_esp_coverage_test_plan.rst    | 12 +--
 test_plans/l3fwdacl_test_plan.rst             | 39 +++++----
 test_plans/large_vf_test_plan.rst             | 10 +--
 test_plans/link_flowctrl_test_plan.rst        |  2 +-
 .../link_status_interrupt_test_plan.rst       |  9 ++-
 ...ack_multi_paths_port_restart_test_plan.rst | 40 +++++-----
 .../loopback_multi_queues_test_plan.rst       | 80 +++++++++----------
 test_plans/mac_filter_test_plan.rst           |  2 +-
 test_plans/macsec_for_ixgbe_test_plan.rst     | 10 +--
 ...ious_driver_event_indication_test_plan.rst |  8 +-
 .../metering_and_policing_test_plan.rst       | 28 +++----
 test_plans/mtu_update_test_plan.rst           |  2 +-
 test_plans/multiple_pthread_test_plan.rst     | 68 ++++++++--------
 test_plans/ptpclient_test_plan.rst            | 10 ++-
 test_plans/ptype_mapping_test_plan.rst        |  2 +-
 test_plans/qinq_filter_test_plan.rst          | 16 ++--
 test_plans/qos_api_test_plan.rst              | 18 ++---
 test_plans/queue_region_test_plan.rst         |  2 +-
 18 files changed, 188 insertions(+), 170 deletions(-)
diff mbox series

Patch

diff --git a/test_plans/l2tp_esp_coverage_test_plan.rst b/test_plans/l2tp_esp_coverage_test_plan.rst
index a768684f..f9edaee9 100644
--- a/test_plans/l2tp_esp_coverage_test_plan.rst
+++ b/test_plans/l2tp_esp_coverage_test_plan.rst
@@ -88,7 +88,7 @@  Test Case 1: test MAC_IPV4_L2TPv3 HW checksum offload
 
 1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -a af:01.0 -- -i --enable-rx-cksum
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -a af:01.0 -- -i --enable-rx-cksum
 
 2. DUT setup csum forwarding mode::
 
@@ -163,7 +163,7 @@  Test Case 2: test MAC_IPV4_ESP HW checksum offload
 
 1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode::
  
-    ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -a af:01.0 -- -i --enable-rx-cksum
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -a af:01.0 -- -i --enable-rx-cksum
 
 2. DUT setup csum forwarding mode::
 
@@ -1095,7 +1095,7 @@  Test Case 14: MAC_IPV4_L2TPv3 vlan strip on + HW checksum offload check
 
 The pre-steps are as l2tp_esp_iavf_test_plan.
 
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
 
 2. DUT create fdir rules for MAC_IPV4_L2TPv3 with queue index and mark::
 
@@ -1189,7 +1189,7 @@  The pre-steps are as l2tp_esp_iavf_test_plan.
 Test Case 15: MAC_IPV4_L2TPv3 vlan insert on + SW checksum offload check
 ========================================================================
 
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
 
 2. DUT create fdir rules for MAC_IPV4_L2TPv3 with queue index and mark::
 
@@ -1279,7 +1279,7 @@  Test Case 16: MAC_IPV4_ESP vlan strip on + HW checksum offload check
 
 The pre-steps are as l2tp_esp_iavf_test_plan.
 
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
 
 2. DUT create fdir rules for MAC_IPV4_ESP with queue index and mark::
 
@@ -1372,7 +1372,7 @@  The pre-steps are as l2tp_esp_iavf_test_plan.
 Test Case 17: MAC_IPV6_NAT-T-ESP vlan insert on + SW checksum offload check
 ===========================================================================
 
-1. ./x86_64-native-linuxapp-gcc/app/testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
+1. ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-9 -n 4 -a af:01.0 -- -i --rxq=16 --txq=16 --portmask=0x1 --nb-cores=2 --enable-rx-cksum
 
 2. DUT create fdir rules for MAC_IPV6_NAT-T-ESP with queue index and mark::
 
diff --git a/test_plans/l3fwdacl_test_plan.rst b/test_plans/l3fwdacl_test_plan.rst
index 7079308c..4ea60686 100644
--- a/test_plans/l3fwdacl_test_plan.rst
+++ b/test_plans/l3fwdacl_test_plan.rst
@@ -73,6 +73,13 @@  Prerequisites
     insmod  ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
     ./usertools/dpdk-devbind.py --bind=igb_uio 04:00.0 04:00.1
 
+Build dpdk and examples=l3fwd-acl:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=l3fwd-acl <build_target>
+   ninja -C <build_target>
+
 Test Case: packet match ACL rule
 ================================
 
@@ -85,7 +92,7 @@  Ipv4 packet match source ip address 200.10.0.1 will be dropped::
     Add one default rule in rule file /root/rule_ipv6.db
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv4 packet with source ip address 200.10.0.1 will be dropped.
@@ -100,7 +107,7 @@  Ipv4 packet match destination ip address 100.10.0.1 will be dropped::
     Add one default rule in rule file /root/rule_ipv6.db
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv4 packet with destination ip address 100.10.0.1 will be dropped.
@@ -115,7 +122,7 @@  Ipv4 packet match source port 11 will be dropped::
     Add one default rule in rule file /root/rule_ipv6.db
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv4 packet with source port 11 will be dropped.
@@ -130,7 +137,7 @@  Ipv4 packet match destination port 101 will be dropped::
     Add one default rule in rule file /root/rule_ipv6.db
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv4 packet with destination port 101 will be dropped.
@@ -145,7 +152,7 @@  Ipv4 packet match protocol TCP will be dropped::
     Add one default rule in rule file /root/rule_ipv6.db
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one TCP ipv4 packet will be dropped.
@@ -160,7 +167,7 @@  Ipv4 packet match 5-tuple will be dropped::
     Add one default rule in rule file /root/rule_ipv6.db
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one TCP ipv4 packet with source ip address 200.10.0.1,
@@ -180,7 +187,7 @@  Ipv6 packet match source ipv6 address 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/12
     Add one default rule in rule file /root/rule_ipv4.db
     R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv6 packet with source ip address 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped.
@@ -195,7 +202,7 @@  Ipv6 packet match destination ipv6 address 2002:0db8:85a3:08d3:1319:8a2e:0370:73
     Add one default rule in rule file /root/rule_ipv4.db
     R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv6 packet with destination ip address 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/128 will be dropped.
@@ -210,7 +217,7 @@  Ipv6 packet match source port 11 will be dropped::
     Add one default rule in rule file /root/rule_ipv4.db
     R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv6 packet with source port 11 will be dropped.
@@ -225,7 +232,7 @@  Ipv6 packet match destination port 101 will be dropped::
     Add one default rule in rule file /root/rule_ipv4.db
     R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one ipv6 packet with destination port 101 will be dropped.
@@ -240,7 +247,7 @@  Ipv6 packet match protocol TCP will be dropped::
     Add one default rule in rule file /root/rule_ipv4.db
     R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one TCP ipv6 packet will be dropped.
@@ -255,7 +262,7 @@  Ipv6 packet match 5-tuple will be dropped::
     Add one default rule in rule file /root/rule_ipv4.db
     R0.0.0.0/0 0.0.0.0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
      --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one TCP ipv6 packet with source ip address 2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128,
@@ -281,7 +288,7 @@  Add two exact rule as below in rule_ipv6.db::
 
 Start l3fwd-acl and send packet::
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     Send one TCP ipv4 packet with source ip address 200.10.0.1, destination
@@ -312,7 +319,7 @@  Add two LPM rule as below in rule_ipv6.db::
 
 Start l3fwd-acl and send packet::
 
-	./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+	./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
 	--rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
 	Send one TCP ipv4 packet with destination ip address 1.1.1.1 will be forward to PORT0.
@@ -333,7 +340,7 @@  Packet match 5-tuple will be dropped::
     @2001:0db8:85a3:08d3:1319:8a2e:0370:7344/128 2002:0db8:85a3:08d3:1319:8a2e:0370:7344/101 11 : 11 101 : 101 0x06/0xff
     R0:0:0:0:0:0:0:0/0 0:0:0:0:0:0:0:0/0 0 : 65535 0 : 65535 0x00/0x00 0
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db" --scalar
 
     Send one TCP ipv4 packet with source ip address 200.10.0.1, destination ip address 100.10.0.1,
@@ -363,7 +370,7 @@  Add two ACL rule as below in rule_ipv6.db::
 
 Start l3fwd-acl::
 
-    ./examples/l3fwd-acl/build/l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
+    ./<build_target>/examples/dpdk-l3fwd-acl -c ff -n 3 -- -p 0x3 --config="(0,0,2),(1,0,3)"
     --rule_ipv4="/root/rule_ipv4.db" --rule_ipv6="/root/rule_ipv6.db"
 
     The l3fwdacl will not set up because of ivalid ACL rule.
diff --git a/test_plans/large_vf_test_plan.rst b/test_plans/large_vf_test_plan.rst
index 71e66bf9..4e2d0555 100644
--- a/test_plans/large_vf_test_plan.rst
+++ b/test_plans/large_vf_test_plan.rst
@@ -57,7 +57,7 @@  Prerequisites
 
 6. Start testpmd with "--txq=256 --rxq=256" to setup 256 queues::
 
-    ./dpdk-testpmd -c ff -n 4 -- -i --rxq=256 --txq=256 --total-num-mbufs=500000
+    ./<build_target>/app/dpdk-testpmd -c ff -n 4 -- -i --rxq=256 --txq=256 --total-num-mbufs=500000
 
 Note::
 
@@ -325,10 +325,10 @@  Subcase 6: negative: fail to test exceed 256 queues
 ---------------------------------------------------
 Start testpmd on VF0 with 512 queues::
 
-    ./dpdk-testpmd -c f -n 4 -- -i --txq=512 --rxq=512
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --txq=512 --rxq=512
 
 or::
-    ./dpdk-testpmd -c f -n 4 -- -i --txq=256 --rxq=256
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --txq=256 --rxq=256
     testpmd> port stop all
     testpmd> port config all rxq 512
     testpmd> port config all txq 512
@@ -408,11 +408,11 @@  Bind all VFs to vfio-pci, only have 32 ports, reached maximum number of ethernet
 
 Start testpmd with queue exceed 4 queues::
 
-     ./dpdk-testpmd -c f -n 4 -- -i --txq=8 --rxq=8
+     ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --txq=8 --rxq=8
 
 or::
 
-    ./dpdktestpmd -c f -n 4 -- -i --txq=4 --rxq=4
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --txq=4 --rxq=4
     testpmd> port stop all
     testpmd> port config all rxq
     testpmd> port config all rxq 8
diff --git a/test_plans/link_flowctrl_test_plan.rst b/test_plans/link_flowctrl_test_plan.rst
index d3bd8af8..373cd39a 100644
--- a/test_plans/link_flowctrl_test_plan.rst
+++ b/test_plans/link_flowctrl_test_plan.rst
@@ -91,7 +91,7 @@  Prerequisites
 Assuming that ports ``0`` and ``2`` are connected to a traffic generator,
 launch the ``testpmd`` with the following arguments::
 
-  ./build/app/testpmd -cffffff -n 3 -- -i --burst=1 --txpt=32 \
+  ./build/app/dpdk-testpmd -cffffff -n 3 -- -i --burst=1 --txpt=32 \
   --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=0x5
 
 The -n command is used to select the number of memory channels.
diff --git a/test_plans/link_status_interrupt_test_plan.rst b/test_plans/link_status_interrupt_test_plan.rst
index 32dea9a4..fe210916 100644
--- a/test_plans/link_status_interrupt_test_plan.rst
+++ b/test_plans/link_status_interrupt_test_plan.rst
@@ -73,11 +73,18 @@  to the device under test::
 
 The test app need add a cmdline, ``--vfio-intr=int_x``.
 
+Build dpdk and examples=link_status_interrupt:
+   CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+   ninja -C <build_target>
+
+   meson configure -Dexamples=link_status_interrupt <build_target>
+   ninja -C <build_target>
+
 Assume port 0 and 1 are connected to the remote ports, e.g. packet generator.
 To run the test application in linuxapp environment with 4 lcores, 2 ports and
 2 RX queues per lcore::
 
-    $ ./link_status_interrupt -c f -- -q 2 -p 0x3
+    $ ./<build_target>/examples/dpdk-link_status_interrupt -c f -- -q 2 -p 0x3
 
 Also, if the ports need to be tested are different, the port mask should be
 changed. The lcore used to run the test application and the number of queues
diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
index 8418996b..ba765caf 100644
--- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
@@ -45,13 +45,13 @@  Test Case 1: loopback test with packed ring mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -86,13 +86,13 @@  Test Case 2: loopback test with packed ring non-mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -127,13 +127,13 @@  Test Case 3: loopback test with packed ring inorder mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=1 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -168,13 +168,13 @@  Test Case 4: loopback test with packed ring inorder non-mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
     -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -209,13 +209,13 @@  Test Case 5: loopback test with split ring inorder mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -250,13 +250,13 @@  Test Case 6: loopback test with split ring inorder non-mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -291,13 +291,13 @@  Test Case 7: loopback test with split ring mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
     -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -332,13 +332,13 @@  Test Case 8: loopback test with split ring non-mergeable path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0,vectorized=1 \
     -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
@@ -373,13 +373,13 @@  Test Case 9: loopback test with split ring vector_rx path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4  --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4  --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0,vectorized=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -414,13 +414,13 @@  Test Case 10: loopback test with packed ring vectorized path
 1. Launch vhost by below command::
 
     rm -rf vhost-net*
-    ./testpmd -n 4 -l 2-4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 2-4 --no-pci \
     --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=0,mrg_rxbuf=0,vectorized=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
     >set fwd mac
diff --git a/test_plans/loopback_multi_queues_test_plan.rst b/test_plans/loopback_multi_queues_test_plan.rst
index 3d2851b8..fae367c6 100644
--- a/test_plans/loopback_multi_queues_test_plan.rst
+++ b/test_plans/loopback_multi_queues_test_plan.rst
@@ -45,14 +45,14 @@  Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -76,14 +76,14 @@  Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=0 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -105,14 +105,14 @@  Test Case 2: loopback with virtio 1.1 non-mergeable path using 1 queue and 8 que
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -136,14 +136,14 @@  Test Case 2: loopback with virtio 1.1 non-mergeable path using 1 queue and 8 que
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=0 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -165,14 +165,14 @@  Test Case 3: loopback with virtio 1.0 inorder mergeable path using 1 queue and 8
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=1,in_order=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -196,14 +196,14 @@  Test Case 3: loopback with virtio 1.0 inorder mergeable path using 1 queue and 8
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=1,in_order=1 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -225,14 +225,14 @@  Test Case 4: loopback with virtio 1.0 inorder non-mergeable path using 1 queue a
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -256,14 +256,14 @@  Test Case 4: loopback with virtio 1.0 inorder non-mergeable path using 1 queue a
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=1 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -285,14 +285,14 @@  Test Case 5: loopback with virtio 1.0 mergeable path using 1 queue and 8 queues
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=1,in_order=0 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -316,14 +316,14 @@  Test Case 5: loopback with virtio 1.0 mergeable path using 1 queue and 8 queues
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=1,in_order=0 \
     -- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -345,14 +345,14 @@  Test Case 6: loopback with virtio 1.0 non-mergeable path using 1 queue and 8 que
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0,vectorized=1 \
     -- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
@@ -376,14 +376,14 @@  Test Case 6: loopback with virtio 1.0 non-mergeable path using 1 queue and 8 que
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1 \
     -- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -405,14 +405,14 @@  Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0,vectorized=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -436,14 +436,14 @@  Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -465,14 +465,14 @@  Test Case 8: loopback with virtio 1.1 inorder mergeable path using 1 queue and 8
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -496,14 +496,14 @@  Test Case 8: loopback with virtio 1.1 inorder mergeable path using 1 queue and 8
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -525,13 +525,13 @@  Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
     -- -i --rx-offloads=0x10 --nb-cores=1 --txd=1024 --rxd=1024
@@ -555,13 +555,13 @@  Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
     -- -i --rx-offloads=0x10 --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
@@ -583,14 +583,14 @@  Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queue
 1. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-2 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
     -i --nb-cores=1 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 2. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 5-6 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 5-6 \
     --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
     -- -i --nb-cores=1 --txd=1024 --rxd=1024
@@ -614,14 +614,14 @@  Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queue
 6. Launch testpmd by below command::
 
     rm -rf vhost-net*
-    ./testpmd -l 1-9 -n 4 --no-pci \
+    ./<build_target>/app/dpdk-testpmd -l 1-9 -n 4 --no-pci \
     --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
     -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
     testpmd>set fwd mac
 
 7. Launch virtio-user by below command::
 
-    ./testpmd -n 4 -l 10-18 \
+    ./<build_target>/app/dpdk-testpmd -n 4 -l 10-18 \
     --no-pci --file-prefix=virtio --force-max-simd-bitwidth=512 \
     --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
     -- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
diff --git a/test_plans/mac_filter_test_plan.rst b/test_plans/mac_filter_test_plan.rst
index a9695cfc..f40ed8b1 100644
--- a/test_plans/mac_filter_test_plan.rst
+++ b/test_plans/mac_filter_test_plan.rst
@@ -48,7 +48,7 @@  Prerequisites
 Assuming that at least a port is connected to a traffic generator,
 launch the ``testpmd`` with the following arguments::
 
-  ./x86_64-default-linuxapp-gcc/build/app/test-pmd/testpmd -c 0xc3 -n 3 -- -i \
+  ./<build_target>/app/dpdk-testpmd -c 0xc3 -n 3 -- -i \
   --burst=1 --rxpt=0     --rxht=0 --rxwt=0 --txpt=36 --txht=0 --txwt=0 \
   --txfreet=32 --rxfreet=64 --mbcache=250 --portmask=0x3
 
diff --git a/test_plans/macsec_for_ixgbe_test_plan.rst b/test_plans/macsec_for_ixgbe_test_plan.rst
index 660c2fd1..68c2c2c8 100644
--- a/test_plans/macsec_for_ixgbe_test_plan.rst
+++ b/test_plans/macsec_for_ixgbe_test_plan.rst
@@ -113,7 +113,7 @@  Test Case 1: MACsec packets send and receive
 
   1. Start the testpmd of rx port::
 
-      ./testpmd -c 0xf --socket-mem 1024,0 --file-prefix=rx -a 0000:07:00.1 \
+      ./<build_target>/app/dpdk-testpmd -c 0xf --socket-mem 1024,0 --file-prefix=rx -a 0000:07:00.1 \
       -- -i --port-topology=chained
 
   2. Set MACsec offload on::
@@ -150,7 +150,7 @@  Test Case 1: MACsec packets send and receive
 
   1. Start the testpmd of tx port::
 
-      ./testpmd -c 0xf0 --socket-mem 1024,0 --file-prefix=tx -a 0000:07:00.0 \
+      ./<build_target>/app/dpdk-testpmd -c 0xf0 --socket-mem 1024,0 --file-prefix=tx -a 0000:07:00.0 \
       -- -i --port-topology=chained
 
   2. Set MACsec offload on::
@@ -403,7 +403,7 @@  Test Case 7: performance test of MACsec offload packets
    Port0 connected to IXIA port5, port1 connected to IXIA port6, set port0
    MACsec offload on, set fwd mac::
 
-      ./testpmd -c 0xf --socket-mem 1024,0 -- -i \
+      ./<build_target>/app/dpdk-testpmd -c 0xf --socket-mem 1024,0 -- -i \
       --port-topology=chained
       testpmd> set macsec offload 0 on encrypt on replay-protect on
       testpmd> set fwd mac
@@ -422,7 +422,7 @@  Test Case 7: performance test of MACsec offload packets
    with cable, connect 05:00.0 to IXIA. Bind the three ports to dpdk driver.
    Start two testpmd::
 
-      ./testpmd -c 0xf --socket-mem 1024,0 --file-prefix=rx -a 0000:07:00.1 \
+      ./<build_target>/app/dpdk-testpmd -c 0xf --socket-mem 1024,0 --file-prefix=rx -a 0000:07:00.1 \
       -- -i --port-topology=chained
 
       testpmd> set macsec offload 0 on encrypt on replay-protect on
@@ -432,7 +432,7 @@  Test Case 7: performance test of MACsec offload packets
       testpmd> set macsec sa tx 0 0 0 0 00112200000000000000000000000000
       testpmd> set fwd rxonly
 
-      ./testpmd -c 0xf0 --socket-mem 1024,0 --file-prefix=tx -b 0000:07:00.1 \
+      ./<build_target>/app/dpdk-testpmd -c 0xf0 --socket-mem 1024,0 --file-prefix=tx -b 0000:07:00.1 \
       -- -i --port-topology=chained
 
       testpmd> set macsec offload 1 on encrypt on replay-protect on
diff --git a/test_plans/malicious_driver_event_indication_test_plan.rst b/test_plans/malicious_driver_event_indication_test_plan.rst
index 1c9d244f..c97555ba 100644
--- a/test_plans/malicious_driver_event_indication_test_plan.rst
+++ b/test_plans/malicious_driver_event_indication_test_plan.rst
@@ -62,10 +62,10 @@  Test Case1:  Check log output when malicious driver events is detected
     echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/max_vfs
 
 2. Launch PF by testpmd
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x03 -n 4 --file-prefix=test1 -a [pci of PF] -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x03 -n 4 --file-prefix=test1 -a [pci of PF] -- -i
      
 3. Launch VF by testpmd
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x03 -n 4 --file-prefix=lei1 -a [pci of VF] -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x03 -n 4 --file-prefix=lei1 -a [pci of VF] -- -i
     > set fwd txonly
     > start
     
@@ -83,11 +83,11 @@  Test Case2:  Check the event counter number for malicious driver events
     echo 1 > /sys/bus/pci/devices/0000\:18\:00.1/max_vfs
 
 2. Launch PF by testpmd
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x03 -n 4 --file-prefix=test1 -a [pci of PF] -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x03 -n 4 --file-prefix=test1 -a [pci of PF] -- -i
 
 3. launch VF by testpmd and start txonly mode 3 times:
     repeat following step 3 times
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x03 -n 4 --file-prefix=lei1 -a [pci of VF] -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x03 -n 4 --file-prefix=lei1 -a [pci of VF] -- -i
     > set fwd txonly
     > start
     > quit
diff --git a/test_plans/metering_and_policing_test_plan.rst b/test_plans/metering_and_policing_test_plan.rst
index e3fb308b..11142395 100644
--- a/test_plans/metering_and_policing_test_plan.rst
+++ b/test_plans/metering_and_policing_test_plan.rst
@@ -144,7 +144,7 @@  Bind them to dpdk igb_uio driver,
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 \
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 \
     --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
     -- -i --portmask=0x10 --disable-rss
     testpmd> start
@@ -153,7 +153,7 @@  Bind them to dpdk igb_uio driver,
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 \
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 \
     --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
     -- -i --portmask=0x10 --disable-rss
     testpmd> set port tm hierarchy default 1
@@ -173,7 +173,7 @@  Test Case 1: ipv4 ACL table RFC2698 GYR
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
 
@@ -226,7 +226,7 @@  Test Case 2: ipv4 ACL table RFC2698 GYD
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -275,7 +275,7 @@  Test Case 3: ipv4 ACL table RFC2698 GDR
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -327,7 +327,7 @@  Test Case 4: ipv4 ACL table RFC2698 DYR
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -378,7 +378,7 @@  Test Case 5: ipv4 ACL table RFC2698 DDD
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -426,7 +426,7 @@  Test Case 6: ipv4 with same CBS and PBS GDR
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -467,7 +467,7 @@  Test Case 7: ipv4 HASH table RFC2698
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table,
   ::
@@ -507,7 +507,7 @@  Test Case 8: ipv6 ACL table RFC2698
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table,
   ::
@@ -561,7 +561,7 @@  Test Case 9: multiple meter and profile
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=4 --txq=4 --portmask=0x10 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=4 --txq=4 --portmask=0x10 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -664,7 +664,7 @@  Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -755,7 +755,7 @@  Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
@@ -848,7 +848,7 @@  Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table
 
   ::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
 
   Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
   ::
diff --git a/test_plans/mtu_update_test_plan.rst b/test_plans/mtu_update_test_plan.rst
index b62ec15a..5a60746a 100644
--- a/test_plans/mtu_update_test_plan.rst
+++ b/test_plans/mtu_update_test_plan.rst
@@ -59,7 +59,7 @@  Assuming that ports ``0`` and ``1`` of the test target are directly connected
 to the traffic generator, launch the ``testpmd`` application with the following
 arguments::
 
-  ./build/app/testpmd -c ffffff -n 6 -- -i --portmask=0x3 --max-pkt-len=9600 \
+  ./build/app/dpdk-testpmd -c ffffff -n 6 -- -i --portmask=0x3 --max-pkt-len=9600 \
   --tx-offloads=0x00008000
 
 The -n command is used to select the number of memory channels. It should match the number of memory channels on that setup.
diff --git a/test_plans/multiple_pthread_test_plan.rst b/test_plans/multiple_pthread_test_plan.rst
index 8dad22d4..9603c494 100644
--- a/test_plans/multiple_pthread_test_plan.rst
+++ b/test_plans/multiple_pthread_test_plan.rst
@@ -81,7 +81,7 @@  Test Case 1: Basic operation
 To run the application, start the testpmd with the lcores all running with
 threads and also the unique core assigned, command as follows::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='0@8,(4-5)@9' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='0@8,(4-5)@9' -n 4 -- -i
 
 Using the command to make sure the lcore are init on the correct cpu::
 
@@ -90,11 +90,11 @@  Using the command to make sure the lcore are init on the correct cpu::
 Result as follows::
 
     PID     TID    %CPU   PSR COMMAND
-    31038   31038  22.5   8   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038   31039  0.0    8   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038   31040  0.0    9   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038   31041  0.0    9   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038   31042  0.0    8   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038   31038  22.5   8   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038   31039  0.0    8   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038   31040  0.0    9   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038   31041  0.0    9   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038   31042  0.0    8   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
 
 Their TIDs are for these threads as below::
 
@@ -134,11 +134,11 @@  Check forward configuration::
 Send packets continuous::
 
     PID    TID   %CPU   PSR COMMAND
-    31038  31038  0.6   8   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038  31039  0.0   8   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038  31040  1.5   9   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038  31041  1.5   9   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
-    31038  31042  0.0   8   ./x86_64-native-linuxapp-gcc/app/testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038  31038  0.6   8   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038  31039  0.0   8   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038  31040  1.5   9   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038  31041  1.5   9   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
+    31038  31042  0.0   8   ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores=0@8,(4-5)@9 -n 4 -- -i
 
 You can see TID 31040(Lcore 4), 31041(Lore 5) are running.
 
@@ -150,7 +150,7 @@  Give examples, suppose DUT have 128 cpu core.
 
 Case 1::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='0@8,(4-5)@(8-11)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='0@8,(4-5)@(8-11)' -n 4 -- -i
 
 It means start 3 EAL thread::
 
@@ -159,7 +159,7 @@  It means start 3 EAL thread::
 
 Case 2::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='1,2@(0-4,6),(3-4,6)@5,(7,8)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='1,2@(0-4,6),(3-4,6)@5,(7,8)' -n 4 -- -i
 
 It means start 7 EAL thread::
 
@@ -171,7 +171,7 @@  It means start 7 EAL thread::
 
 Case 3::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,CONFIG_RTE_MAX_LCORE-1)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,CONFIG_RTE_MAX_LCORE-1)@(4,5)' -n 4 -- -i
 
 (default CONFIG_RTE_MAX_LCORE=128).
 It means start 2 EAL thread::
@@ -180,7 +180,7 @@  It means start 2 EAL thread::
 
 Case 4::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,64-66)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,64-66)@(4,5)' -n 4 -- -i
 
 It means start 4 EAL thread::
 
@@ -188,7 +188,7 @@  It means start 4 EAL thread::
 
 Case 5::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='2-5,6,7-9' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='2-5,6,7-9' -n 4 -- -i
 
 It means start 8 EAL thread::
 
@@ -203,7 +203,7 @@  It means start 8 EAL thread::
 
 Case 6::    
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='2,(3-5)@3' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='2,(3-5)@3' -n 4 -- -i
 
 It means start 4 EAL thread::
 
@@ -212,7 +212,7 @@  It means start 4 EAL thread::
 
 Case 7::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,7-4)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,7-4)@(4,5)' -n 4 -- -i
 
 It means start 5 EAL thread::
 
@@ -224,19 +224,19 @@  Test Case 3: Negative Test
 --------------------------
 Input invalid commands to make sure the commands can't work::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0-,4-7)@(4,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(-1,4-7)@(4,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7-9)@(4,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,abcd)@(4,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7)@(1-,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7)@(-1,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7)@(4,5-8-9)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7)@(abc,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7)@(4,xyz)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0,4-7)=(8,9)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='2,3 at 4,(0-1,,4))' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='[0-,4-7]@(4,5)' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='(0-,4-7)@[4,5]' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='3-4 at 3,2 at 5-6' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='2,,3''2--3' -n 4 -- -i
-    ./x86_64-native-linuxapp-gcc/app/testpmd --lcores='2,,,3''2--3' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0-,4-7)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(-1,4-7)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7-9)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,abcd)@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7)@(1-,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7)@(-1,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7)@(4,5-8-9)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7)@(abc,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7)@(4,xyz)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0,4-7)=(8,9)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='2,3 at 4,(0-1,,4))' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='[0-,4-7]@(4,5)' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='(0-,4-7)@[4,5]' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='3-4 at 3,2 at 5-6' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='2,,3''2--3' -n 4 -- -i
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd --lcores='2,,,3''2--3' -n 4 -- -i
diff --git a/test_plans/ptpclient_test_plan.rst b/test_plans/ptpclient_test_plan.rst
index 7781bffc..31ba2b15 100644
--- a/test_plans/ptpclient_test_plan.rst
+++ b/test_plans/ptpclient_test_plan.rst
@@ -45,7 +45,11 @@  Assume one port is connected to the tester and "linuxptp.x86_64"
 has been installed on the tester.
 
 Case Config::
-    For support IEEE1588, need to set "CONFIG_RTE_LIBRTE_IEEE1588=y" in ./config/common_base and re-build DPDK.
+
+    Meson: For support IEEE1588, need to execute "sed -i '$a\#define RTE_LIBRTE_IEEE1588 1' config/rte_config.h",
+           and re-build DPDK.
+           $ CC=gcc meson -Denable_kmods=True -Dlibdir=lib  --default-library=static <build_target>
+           $ ninja -C <build_target>
 
 The sample should be validated on Forville, Niantic and i350 Nics. 
 
@@ -57,7 +61,7 @@  Start ptp server on tester with IEEE 802.3 network transport::
 
 Start ptp client on DUT and wait few seconds::
 
-    ./examples/ptpclient/build/ptpclient -c f -n 3 -- -T 0 -p 0x1
+    ./<build_target>/examples/dpdk-ptpclient -c f -n 3 -- -T 0 -p 0x1
 
 Check that output message contained T1,T2,T3,T4 clock and time difference
 between master and slave time is about 10us in niantic, 20us in Fortville,
@@ -79,7 +83,7 @@  Start ptp server on tester with IEEE 802.3 network transport::
 
 Start ptp client on DUT and wait few seconds::
 
-    ./examples/ptpclient/build/ptpclient -c f -n 3 -- -T 1 -p 0x1
+    ./<build_target>/examples/dpdk-ptpclient -c f -n 3 -- -T 1 -p 0x1
 
 Make sure DUT system time has been changed to same as tester.
 Check that output message contained T1,T2,T3,T4 clock and time difference
diff --git a/test_plans/ptype_mapping_test_plan.rst b/test_plans/ptype_mapping_test_plan.rst
index d157b670..fdabd191 100644
--- a/test_plans/ptype_mapping_test_plan.rst
+++ b/test_plans/ptype_mapping_test_plan.rst
@@ -61,7 +61,7 @@  Add print info to testpmd for case::
 
 Start testpmd, enable rxonly and verbose mode::
 
-        ./testpmd -c f -n 4 -- -i --port-topology=chained
+        ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i --port-topology=chained
 
 Test Case 1: Get ptype mapping
 ==============================
diff --git a/test_plans/qinq_filter_test_plan.rst b/test_plans/qinq_filter_test_plan.rst
index 7b0a8d14..488596ed 100644
--- a/test_plans/qinq_filter_test_plan.rst
+++ b/test_plans/qinq_filter_test_plan.rst
@@ -58,7 +58,7 @@  Testpmd configuration - 4 RX/TX queues per port
 
 #. set up testpmd with fortville NICs::
 
-      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --disable-rss
+      ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --disable-rss
 
 #. enable qinq::
 
@@ -91,7 +91,7 @@  Testpmd configuration - 4 RX/TX queues per port
 
 #. set up testpmd with fortville NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --disable-rss
 
 #. enable qinq::
 
@@ -134,7 +134,7 @@  Test Case 3: qinq packet filter to VF queues
  
 #. set up testpmd with fortville PF NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -a 81:00.0 -- -i --rxq=4 --txq=4
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -a 81:00.0 -- -i --rxq=4 --txq=4
 
 #. enable qinq::
 
@@ -160,7 +160,7 @@  Test Case 3: qinq packet filter to VF queues
 
 #. set up testpmd with fortville VF0 NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -a 81:02.0 -- -i --rxq=4 --txq=4
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -a 81:02.0 -- -i --rxq=4 --txq=4
 
 #. PMD fwd only receive the packets::
 
@@ -176,7 +176,7 @@  Test Case 3: qinq packet filter to VF queues
 
 #. set up testpmd with fortville VF1 NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -a 81:02.1 -- -i --rxq=4 --txq=4
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -a 81:02.1 -- -i --rxq=4 --txq=4
 
 #. PMD fwd only receive the packets::
 
@@ -211,7 +211,7 @@  Test Case 4: qinq packet filter with different tpid
  
 #. set up testpmd with fortville PF NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -a 81:00.0 -- -i --rxq=4 --txq=4
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -a 81:00.0 -- -i --rxq=4 --txq=4
 
 #. enable qinq::
 
@@ -241,7 +241,7 @@  Test Case 4: qinq packet filter with different tpid
 
 #. set up testpmd with fortville VF0 NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -a 81:02.0 -- -i --rxq=4 --txq=4
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -a 81:02.0 -- -i --rxq=4 --txq=4
 
 #. PMD fwd only receive the packets::
 
@@ -257,7 +257,7 @@  Test Case 4: qinq packet filter with different tpid
 
 #. set up testpmd with fortville VF1 NICs::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -a 81:02.1 -- -i --rxq=4 --txq=4
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -a 81:02.1 -- -i --rxq=4 --txq=4
 
 #. PMD fwd only receive the packets::
 
diff --git a/test_plans/qos_api_test_plan.rst b/test_plans/qos_api_test_plan.rst
index f8a77d4c..9102907e 100644
--- a/test_plans/qos_api_test_plan.rst
+++ b/test_plans/qos_api_test_plan.rst
@@ -90,7 +90,7 @@  Test Case: dcb 4 tc queue mapping
 =================================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-27 -n 4 --master-lcore=23 -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 23-27 -n 4 --master-lcore=23 -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
     testpmd> port stop all
     testpmd> port config 0 dcb vt off 4 pfc off
     testpmd> port config 1 dcb vt off 4 pfc off
@@ -115,7 +115,7 @@  Test Case: dcb 8 tc queue mapping
 =================================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-31 -n 4 --master-lcore=23 -- -i --nb-cores=8 --rxq=8 --txq=8 --rss-ip
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 23-31 -n 4 --master-lcore=23 -- -i --nb-cores=8 --rxq=8 --txq=8 --rss-ip
     testpmd> port stop all
     testpmd> port config 0 dcb vt off 8 pfc off
     testpmd> port config 1 dcb vt off 8 pfc off
@@ -148,7 +148,7 @@  Test Case: shaping 1 port 4 tc
 ==============================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-27 -n 4 --master-lcore=23 -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 23-27 -n 4 --master-lcore=23 -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
     testpmd> port stop all
     testpmd> port config 0 dcb vt off 4 pfc off
     testpmd> port config 1 dcb vt off 4 pfc off
@@ -191,7 +191,7 @@  Test Case:  shaping 1 port 8 tc
 ===============================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-31 -n 4 --master-lcore=23 -- -i --nb-cores=8 --rxq=8 --txq=8 --rss-ip
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 23-31 -n 4 --master-lcore=23 -- -i --nb-cores=8 --rxq=8 --txq=8 --rss-ip
     testpmd> port stop all
     testpmd> port config 0 dcb vt off 8 pfc off
     testpmd> port config 1 dcb vt off 8 pfc off
@@ -246,7 +246,7 @@  Test Case: shaping for port
 ===========================
 1. Start testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 23-27 -n 4 --master-lcore=23 -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 23-27 -n 4 --master-lcore=23 -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
     testpmd> port stop 1
 
 1. Add private shaper 0::
@@ -273,7 +273,7 @@  Test Case: dcb 4 tc queue mapping
 =================================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-7 -n 4 --master-lcore=3 -- -i --nb-cores=4 --rxq=4 --txq=4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-7 -n 4 --master-lcore=3 -- -i --nb-cores=4 --rxq=4 --txq=4 --disable-rss
     testpmd> vlan set filter off 0
     testpmd> vlan set filter off 1
     testpmd> port stop all
@@ -300,7 +300,7 @@  Test Case: dcb 8 tc queue mapping
 =================================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-11 -n 4 --master-lcore=3 -- -i --nb-cores=8 --rxq=8 --txq=8 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-11 -n 4 --master-lcore=3 -- -i --nb-cores=8 --rxq=8 --txq=8 --disable-rss
     testpmd> vlan set filter off 0
     testpmd> vlan set filter off 1
     testpmd> port stop all
@@ -335,7 +335,7 @@  Test Case: shaping for queue with 4 tc
 ======================================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-7 -n 4 --master-lcore=3 -- -i --nb-cores=4 --rxq=4 --txq=4 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-7 -n 4 --master-lcore=3 -- -i --nb-cores=4 --rxq=4 --txq=4 --disable-rss
     testpmd> vlan set filter off 0
     testpmd> vlan set filter off 1
     testpmd> port stop all
@@ -381,7 +381,7 @@  Test Case: shaping for queue with 8 tc
 ======================================
 1. Start testpmd and set DCB::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -l 3-11 -n 4 --master-lcore=3 -- -i --nb-cores=8 --rxq=8 --txq=8 --disable-rss
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-11 -n 4 --master-lcore=3 -- -i --nb-cores=8 --rxq=8 --txq=8 --disable-rss
     testpmd> vlan set filter off 0
     testpmd> vlan set filter off 1
     testpmd> port stop all
diff --git a/test_plans/queue_region_test_plan.rst b/test_plans/queue_region_test_plan.rst
index 1db71094..7e4c9ca6 100644
--- a/test_plans/queue_region_test_plan.rst
+++ b/test_plans/queue_region_test_plan.rst
@@ -79,7 +79,7 @@  Prerequisites
 
 4. start the testpmd::
 
-    ./x86_64-native-linuxapp-gcc/app/testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 1ffff -n 4 -- -i --rxq=16 --txq=16
     testpmd> port config all rss all
     testpmd> set fwd rxonly
     testpmd> set verbose 1