@@ -39,7 +39,6 @@ l2fwd-keepalive=target/examples/dpdk-l2fwd-keepalive
l3fwd=target/examples/dpdk-l3fwd
l3fwd-acl=target/examples/dpdk-l3fwd-acl
l3fwd-power=target/examples/dpdk-l3fwd-power
-l3fwd-thread=target/examples/dpdk-l3fwd-thread
link_status_interrupt=target/examples/dpdk-link_status_interrupt
ntb=target/examples/dpdk-ntb
packet_ordering=target/examples/dpdk-packet_ordering
@@ -104,7 +103,6 @@ l2fwd-keepalive=examples/l2fwd-keepalive/build/app/l2fwd-keepalive
l3fwd=examples/l3fwd/build/app/l3fwd
l3fwd-acl=examples/l3fwd-acl/build/app/l3fwd-acl
l3fwd-power=examples/l3fwd-power/build/app/l3fwd-power
-l3fwd-thread=examples/performance-thread/l3fwd-thread/build/app/l3fwd-thread
link_status_interrupt=examples/link_status_interrupt/build/app/link_status_interrupt
ntb=examples/ntb/build/app/ntb_fwd
packet_ordering=examples/packet_ordering/build/app/packet_ordering
@@ -285,7 +285,6 @@ The following are the test plans for the DPDK DTS automated test system.
packet_capture_test_plan
packet_ordering_test_plan
bbdev_test_plan
- performance_thread_test_plan
fips_cryptodev_test_plan
flow_filtering_test_plan
deleted file mode 100644
@@ -1,227 +0,0 @@
-.. Copyright (c) <2011-2019>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-=====================================
-Performance-thread performance Tests
-=====================================
-
-The Performance-Thread results are produced using ``l3fwd-thread`` application.
-
-For more information about Performance Thread sameple applicaton please refer to
-link: http://doc.dpdk.org/guides/sample_app_ug/performance_thread.html
-
-Prerequisites
-=============
-
-1. Hardware requirements:
-
- - For each CPU socket, each memory channel should be populated with at least 1x DIMM
- - Board is populated with 4x 1GbE or 10GbE ports. Special PCIe restrictions may
- be required for performance. For example, the following requirements should be
- met for Intel 82599 (Niantic) NICs:
-
- - NICs are plugged into PCIe Gen2 or Gen3 slots
- - For PCIe Gen2 slots, the number of lanes should be 8x or higher
- - A single port from each NIC should be used, so for 4x ports, 4x NICs should
- be used
-
- - NIC ports connected to traffic generator. It is assumed that the NIC ports
- P0, P1 (as identified by the DPDK application) are connected to the
- traffic generator ports TG0, TG1. The application-side port mask of
- NIC ports P0, P1 is noted as PORTMASK in this section.
-
-2. BIOS requirements:
-
- - Intel Hyper-Threading Technology is ENABLED
- - Hardware Prefetcher is DISABLED
- - Adjacent Cache Line Prefetch is DISABLED
- - Direct Cache Access is DISABLED
-
-3. Linux kernel requirements:
-
- - Linux kernel has the following features enabled: huge page support, UIO, HPET
- - Appropriate number of huge pages are reserved at kernel boot time
- - The IDs of the hardware threads (logical cores) per each CPU socket can be
- determined by parsing the file /proc/cpuinfo. The naming convention for the
- logical cores is: C{x.y.z} = hyper-thread z of physical core y of CPU socket x,
- with typical values of x = 0 .. 3, y = 0 .. 7, z = 0 .. 1. Logical cores
- C{0.0.1} and C{0.0.1} should be avoided while executing the test, as they are
- used by the Linux kernel for running regular processes.
-
-4. The application options to be used in below test cases are listed as well as the
-general description.::
-
- ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-thread [EAL options] -- \
- -p PORTMASK [-P]
- --rx(port,queue,lcore,thread)[,(port,queue,lcore,thread)]
- --tx(lcore,thread)[,(lcore,thread)]
- [--enable-jumbo] [--max-pkt-len PKTLEN]]
- [--no-lthreads]
-
- For other options please refer to URL memtioned above for detail explanation.
-
-5. Traffic generator requirements
-
-The flows need to be configured and started by the traffic generator:
-
- +------+---------+------------+---------------+------------+---------+
- | Flow | Traffic | MAC | MAC | IPV4 | IPV4 |
- | | Gen. | Src. | Dst. | Src. | Dest. |
- | | Port | Address | Address | Address | Address |
- +======+=========+============+===============+============+=========+
- | 1 | TG0 | Random MAC | DUT Port0 Mac | Random IP | 2.1.1.1 |
- +------+---------+------------+---------------+------------+---------+
- | 2 | TG1 | Random Mac | DUT port1 Mac | Random IP | 1.1.1.1 |
- +------+---------+------------+---------------+------------+---------+
-
-6. Test results table.
-
-Frame sizes should be configured from 64,128,256,512,1024,2000, etc
-
- +------------+---------+------------------+--------------+
- | Frame Size | S/C/T | Throughput(Mpps) | Line Rate(%) |
- +============+=========+==================+==============+
- | 64 | | | |
- +------------+---------+------------------+--------------+
- | 128 | | | |
- +------------+---------+------------------+--------------+
- | 256 | | | |
- +------------+---------+------------------+--------------+
- | 512 | | | |
- +------------+---------+------------------+--------------+
- | 1024 | | | |
- +------------+---------+------------------+--------------+
- | 2000 | | | |
- +------------+---------+------------------+--------------+
-
-
-Test Case: one_lcore_per_pcore performance
-==========================================
-
-1. Launch app with descriptor parameters::
-
- ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-thread \
- -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \
- --rx="(0,0,0,0)(1,0,0,0)" --tx="(1,0)" --no-lthread
-
- (Note: option "--stat-lcore" is not enabled in the automation scripts)
-
-2. Send traffic and verify performance.
-
-3. Repeat above tests with below command lines respectively
-
- +-----+---------------------------------------------------------------------------------------------------+
- | # | Command Line |
- +=====+===================================================================================================+
- | 1 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(1,0,1,1) --tx="(2,0)(3,1) \ |
- | | --no-lthread |
- +-----+---------------------------------------------------------------------------------------------------+
- | 2 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)" \ |
- | | --tx="(4,0)(5,1)(6,2)(7,3)" --no-lthread |
- +-----+---------------------------------------------------------------------------------------------------+
- | 3 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \ |
- | | --tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)" \ |
- | | --no-lthread |
- +-----+---------------------------------------------------------------------------------------------------+
-
-4. Check test results and full out the above result table.
-
-
-Test Case: n_lcore_per_pcore performance
-========================================
-
-1. Launch app with descriptor parameters::
-
- ./examples/performance-thread/l3fwd-thread/x86_64-native-linuxapp-gcc/l3fwd-thread \
- --lcores="2,(0-1)@0" -- -P -p 3 --max-pkt-len 2500 \
- --rx="(0,0,0,0)(1,0,0,0)" --tx="(1,0)"
-
- (Note: option "--stat-lcore" is not enabled in the automation scripts)
-
-2. Send traffic and verify performance both directional and bi-directional
-
-3. Repeat above tests with below command lines respectively
-
- +-----+---------------------------------------------------------------------------------------------------+
- | # | Command Line |
- +=====+===================================================================================================+
- | 1 | ./dpdk-l3fwd-thread -n 4 --lcores="(0-3)@0,4" -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(1,0,1,1) --tx="(2,0)(3,1) \ |
- | | --no-lthread |
- +-----+---------------------------------------------------------------------------------------------------+
- | 2 | ./dpdk-l3fwd-thread -n 4 --lcores="(0-7)@0,8" -- -P -p 3-P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(0,1,1,1)(1,0,2,2)(1,1,3,3)" \ |
- | | --tx="(4,0)(5,1)(6,2)(7,3)" --no-lthread |
- +-----+---------------------------------------------------------------------------------------------------+
- | 3 | ./dpdk-l3fwd-thread -n 4 --lcores="(0-15)@0,16" -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(0,1,1,1)(0,2,2,2)(0,3,3,3)(1,0,4,4)(1,1,5,5)(1,2,6,6)(1,3,7,7)" \ |
- | | --tx="(8,0)(9,1)(10,2)(11,3)(12,4)(13,5)(14,6)(15,7)" \ |
- | | --no-lthread |
- +-----+---------------------------------------------------------------------------------------------------+
-
-4. Check test results and full out the above result table.
-
-
-Test Case: n_lthread_per_pcore performance
-==========================================
-
-1. Launch app with descriptor parameters::
-
- ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-thread \
- -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \
- ----tx="(0,0)" --tx="(0,0)"
-
- (Note: option "--stat-lcore" is not enabled in the automation scripts)
-
-2. Send traffic and verify performance both directional and bi-directional
-
-3. Repeat above tests with below command lines respectively
-
- +-----+---------------------------------------------------------------------------------------------------+
- | # | Command Line |
- +=====+===================================================================================================+
- | 1 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(1,0,1,1) --tx="(0,0),(0,1)" |
- +-----+---------------------------------------------------------------------------------------------------+
- | 2 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(0,1,0,1)(1,0,0,2)(1,1,0,3)" \ |
- | | --tx="(0,0)(0,1)(0,2)(0,3)" |
- +-----+---------------------------------------------------------------------------------------------------+
- | 3 | ./dpdk-l3fwd-thread -c ff -n 4 -- -P -p 3 --max-pkt-len 2500 \ |
- | | --rx="(0,0,0,0)(0,1,0,1)(0,2,0,2)(0,3,0,3)(1,0,0,4)(1,1,0,5)(1,2,0,6)(1,3,0,7)" \ |
- | | --tx="(0,0)(0,1)(0,2)(0,3)(0,4)(0,5)(0,6)(0,7)" \ |
- +-----+---------------------------------------------------------------------------------------------------+
-
-4. Check test results and full out the above result table.
deleted file mode 100644
@@ -1,258 +0,0 @@
-# BSD LICENSE
-#
-# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-"""
-DPDK Test suite.
-Performance-Thread test script.
-"""
-import os
-import string
-
-import framework.utils as utils
-from framework.pktgen import PacketGeneratorHelper
-from framework.settings import HEADER_SIZE
-from framework.test_case import TestCase
-
-
-class TestPerformanceThread(TestCase):
-
- def set_up_all(self):
- """
- Run at the start of each test suite.
- """
- self.dut_ports = self.dut.get_ports(self.nic)
- global valports
- valports = [_ for _ in self.dut_ports if self.tester.get_local_port(_) != -1]
-
- # Verify that enough ports are available
- self.verify(len(valports) >= 2, "Insufficent Ports")
-
- self.port_mask = utils.create_mask(valports)
- self.socket = self.dut.get_numa_id(self.dut_ports[0])
-
- self.frame_sizes = self.get_suite_cfg()["frame_size"]
- self.nb_cores = self.get_suite_cfg()["cores"]
- self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] + HEADER_SIZE['tcp']
-
- # compile performance_thread app
- out = self.dut.build_dpdk_apps("./examples/performance-thread/l3fwd-thread")
- self.verify("Error" not in out, "compilation error 1")
- self.verify("No such file" not in out, "compilation error 2")
-
- # results table header
- self.test_results = {'header': [], 'data': []}
-
- # get dts output path
- if self.logger.log_path.startswith(os.sep):
- self.output_path = self.logger.log_path
- else:
- cur_path = os.path.dirname(
- os.path.dirname(os.path.realpath(__file__)))
- self.output_path = os.sep.join([cur_path, self.logger.log_path])
- # create an instance to set stream field setting
- self.pktgen_helper = PacketGeneratorHelper()
-
- def set_up(self):
- """
- Run before each test case.
- """
- pass
-
- def flows(self):
- """
- Return a list of packets that implements the flows described.
- """
- return [
- 'IP(src="1.2.3.4",dst="192.18.1.0")',
- 'IP(src="1.2.3.4",dst="192.18.1.1")',
- 'IP(src="1.2.3.4",dst="192.18.0.0")',
- 'IP(src="1.2.3.4",dst="192.18.0.1")',
- 'IP(src="1.2.3.4",dst="192.18.3.0")',
- 'IP(src="1.2.3.4",dst="192.18.3.1")',
- 'IP(src="1.2.3.4",dst="192.18.2.0")',
- 'IP(src="1.2.3.4",dst="192.18.2.1")']
-
- def create_cores(self, cores):
-
- core_config = "1S/{}C/1T".format(cores)
- core_list = self.dut.get_core_list(core_config, socket=self.socket)
- core_mask = utils.create_mask(core_list)
- return core_list, core_mask
-
- def config_rx_tx(self, cores, core_list):
-
- # config --tx and --tx params for performace thread app
- if cores == 2:
- rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + "({},{},{},{})".format(valports[1], 0,
- core_list[0], 0)
- tx = "({},{})".format(core_list[1], 0)
- elif cores == 4:
- rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + "({},{},{},{})".format(valports[1], 0,
- core_list[1], 1)
- tx = "({},{})".format(core_list[2], 0) + "," + "({},{})".format(core_list[3], 1)
- elif cores == 8:
- rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + \
- "({},{},{},{})".format(valports[0], 1, core_list[1], 1) + "," + \
- "({},{},{},{})".format(valports[1], 0, core_list[2], 2) + "," + \
- "({},{},{},{})".format(valports[1], 1, core_list[3], 3)
- tx = "({},{})".format(core_list[4], 0) + "," + "({},{})".format(core_list[5], 1) + "," + \
- "({},{})".format(core_list[6], 2) + "," + "({},{})".format(core_list[7], 3)
- elif cores == 16:
- rx = "({},{},{},{})".format(valports[0], 0, core_list[0], 0) + "," + \
- "({},{},{},{})".format(valports[0], 1, core_list[1], 1) + "," + \
- "({},{},{},{})".format(valports[0], 2, core_list[2], 2) + "," + \
- "({},{},{},{})".format(valports[0], 3, core_list[3], 3) + "," + \
- "({},{},{},{})".format(valports[1], 0, core_list[4], 4) + "," + \
- "({},{},{},{})".format(valports[1], 1, core_list[5], 5) + "," + \
- "({},{},{},{})".format(valports[1], 2, core_list[6], 6) + "," + \
- "({},{},{},{})".format(valports[1], 3, core_list[7], 7)
- tx = "({},{})".format(core_list[8], 0) + "," + "({},{})".format(core_list[9], 1) + "," + \
- "({},{})".format(core_list[10], 2) + "," + "({},{})".format(core_list[11], 3) + "," + \
- "({},{})".format(core_list[12], 4) + "," + "({},{})".format(core_list[13], 5) + "," + \
- "({},{})".format(core_list[14], 6) + "," + "({},{})".format(core_list[15], 7)
-
- lcore_config = "(%s-%s)@%s" % (core_list[0], core_list[-1], core_list[0])
- return lcore_config, rx, tx
-
- def create_pacap_file(self, frame_size):
- """
- Prepare traffic flow
- """
- dmac = [self.dut.get_mac_address(self.dut_ports[i]) for i in valports]
- smac = ["02:00:00:00:00:0%d" % i for i in valports]
- payload_size = frame_size - HEADER_SIZE['ip'] - HEADER_SIZE['eth']
- pcaps = {}
- for _port in valports:
- index = valports[_port]
- cnt = 0
- for layer in self.flows()[_port * 2:(_port + 1) * 2]:
- flow = ['Ether(dst="%s", src="%s")/%s/("X"*%d)' % (dmac[index], smac[index], layer, payload_size)]
- pcap = os.sep.join([self.output_path, "dst{0}_{1}.pcap".format(index, cnt)])
- self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, ','.join(flow)))
- self.tester.scapy_execute()
- if index not in pcaps:
- pcaps[index] = []
- pcaps[index].append(pcap)
- cnt += 1
- return pcaps
-
- def prepare_stream(self, pcaps):
- """
- create streams for ports,one port one stream
- """
- tgen_input = []
- for rxPort in valports:
- if rxPort % len(valports) == 0 or len(valports) % rxPort == 2:
- txIntf = self.tester.get_local_port(valports[rxPort + 1])
- port_id = valports[rxPort + 1]
- else:
- txIntf = self.tester.get_local_port(valports[rxPort - 1])
- port_id = valports[rxPort - 1]
- rxIntf = self.tester.get_local_port(valports[rxPort])
- for pcap in pcaps[port_id]:
- tgen_input.append((txIntf, rxIntf, pcap))
- return tgen_input
-
- def perf_test(self, params):
-
- # create result table
- header_row = ["Frame size", "S/C/T", "Throughput(Mpps)", "Line Rate(%)"]
- self.test_results["header"] = header_row
- self.result_table_create(header_row)
- self.test_results["data"] = []
- eal_param = ""
- for i in valports:
- eal_param += " -a %s" % self.dut.ports_info[i]['pci']
-
- for cores in self.nb_cores:
- core_list, core_mask = self.create_cores(cores)
- lcore_config, rx, tx = self.config_rx_tx(cores, core_list)
- app_name = self.dut.apps_name['l3fwd-thread']
- if self.running_case is "test_perf_n_lcore_per_pcore":
- cmdline = "{} -n 4 {} --lcores='{}' {} --rx='{}' --tx='{}'".format(app_name, eal_param, lcore_config, params, rx, tx)
- else:
- cmdline = "{} -c {} {} {} --rx='{}' --tx='{}'".format(app_name, core_mask, eal_param, params, rx, tx)
- self.dut.send_expect(cmdline, "L3FWD:", 120)
-
- for frame_size in self.frame_sizes:
- pcaps = self.create_pacap_file(frame_size)
- # send the traffic and Measure test
- tgenInput = self.prepare_stream(pcaps)
-
- vm_config = self.set_fields()
- # clear streams before add new streams
- self.tester.pktgen.clear_streams()
- # run packet generator
- streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100, vm_config, self.tester.pktgen)
- # set traffic option
- traffic_opt = {'delay': 15}
- _, pps = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
- self.verify(pps > 0, "No traffic detected")
- pps /= 1000000.0
- linerate = self.wirespeed(self.nic, frame_size, len(valports))
- percentage = pps * 100 / linerate
- data_row = [frame_size, "1S/{}C/1T".format(cores), str(pps), str(percentage)]
- self.result_table_add(data_row)
- self.test_results["data"].append(data_row)
- # stop application
- self.dut.send_expect("^C", "# ", 15)
- self.result_table_print()
-
- def test_perf_one_lcore_per_pcore(self):
- params = "-n 4 -- -P -p {} --max-pkt-len=2500 --no-lthread" .format(self.port_mask)
- self.perf_test(params)
-
- def test_perf_n_lthreads_per_pcore(self):
- params = "-n 4 -- -P -p {} --max-pkt-len=2500" .format(self.port_mask)
- self.perf_test(params)
-
- def test_perf_n_lcore_per_pcore(self):
- params = "-- -P -p {} --max-pkt-len 2500 --no-lthread" .format(self.port_mask)
- self.perf_test(params)
-
- def set_fields(self):
- """
- set ip protocol field behavior
- """
- fields_config = {'ip': {'src': {'action': 'random'}, }, }
- return fields_config
-
- def tear_down(self):
- """
- Run after each test case.
- """
- self.dut.kill_all()
-
- def tear_down_all(self):
- """
- Run after each test suite.
- """
- pass