diff --git a/test_plans/dcf_lifecycle_test_plan.rst b/test_plans/dcf_lifecycle_test_plan.rst
index a8701338..42729318 100644
--- a/test_plans/dcf_lifecycle_test_plan.rst
+++ b/test_plans/dcf_lifecycle_test_plan.rst
@@ -1078,9 +1078,6 @@ CVL DCF enable device reset API
 
 Description
 ===========
-The test plan includes ten test cases, such as two_testpmd_dcf_reset_port, two_testpmd_dcf_reset_device, two_testpmd_dcf_reset_port_detach, two_testpmd_dcf_reset_mtu,
-two_testpmd_dcf_reset_mac, one_testpmd_dcf_reset_port, one_testpmd_dcf_reset_device, one_testpmd_dcf_reset_port_detach, one_testpmd_dcf_reset_mtu, one_testpmd_dcf_reset_mac.
-
 DCF PMD need to support rte_eth_dev_reset.The reason is that when a DCF instance be killed, all the flow rules still exist in hardware. when DCF gets to reconnect, 
 It has already lost the flow context, and if the application wants to create new rules, they may fail because FW reports that the rules already exist.The current 
 workaround assumes that the user can turn off / turn on VF trust mode, so kernel PF will reset DCF by removing all old rules.The rte_eth_dev_reset API provides 
@@ -1100,44 +1097,39 @@ scapy: http://www.secdev.org/projects/scapy/
 
 General Set Up
 --------------
-1. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg,
-   then load driver::
-
-    # cp ice_comms-1.3.31.0.pkg /lib/firmware/updates/intel/ice/ddp/ice.pkg
-    # rmmod ice
-    # insmod ice.ko
-
-2. Compile DPDK::
+1. Compile DPDK::
 
-    # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static x86_64-native-linuxapp-gcc
-    # ninja -C x86_64-native-linuxapp-gcc -j 110
+    # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static <dpdk build dir>
+    # ninja -C <dpdk build dir> -j 110
 
-3. Get the pci device id and interface of DUT and tester. 
+2. Get the pci device id and interface of DUT and tester. 
+   For example, 0000:3b:00.0 and 0000:af:00.0 is pci device id,
+   ens785f0 and ens260f0 is interface::
 
-    # ./usertools/dpdk-devbind.py -s
+    <dpdk dir># ./usertools/dpdk-devbind.py -s
 
     0000:3b:00.0 'Ethernet Controller E810-C for SFP 1593' if=ens785f0 drv=ice unused=vfio-pci
     0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b' if=ens260f0 drv=i40e unused=vfio-pci
 
-4. Generate 4 VFs on PF0::
+3. Generate 4 VFs on PF0::
 
     # echo 4 > /sys/bus/pci/devices/0000:3b:00.0/sriov_numvfs
 
-5. Get VF pci device id of DUT.
+4. Get VF pci device id and interface of DUT.
 
     # ./usertools/dpdk-devbind.py -s
 
      0000:3b:01.0 'Ethernet Adaptive Virtual Function 1889' if=ens785f0v0 drv=iavf unused=vfio-pci
      0000:3b:01.1 'Ethernet Adaptive Virtual Function 1889' if=ens785f0v1 drv=iavf unused=vfio-pci
 
-6. Set VF0 as trust::
+5. Set VF0 as trust::
 
     # ip link set ens785f0 vf 0 trust on
 
-7. Bind the VF ports of DUT to dpdk::
-
-    # ./usertools/dpdk-devbind.py -b vfio-pci 3b:01.0 3b:01.1
+6. Bind the DUT port to dpdk::
 
+    <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
+    
 Test case
 =========
 
@@ -1147,11 +1139,21 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
 
 1. Launch the userland ``testpmd`` application on DUT as follows::
 
-    # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd  -v -c 0x6 -n 4 -a 0000:3b:01.0,cap=dcf --file-prefix=dcf -- -i
+    <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device id> -- -i 
 
+..note:: 
+
+    For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
+    For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf --file-prefix=dcf" for this test plan.
+  
 2. Launch another ``testpmd`` application on the VF1 of DUT as follows::
 
-    # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -v -c 0x18 -n 4 -a 0000:3b:01.1 --file-prefix=vf -- -i
+    <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device id> -- -i 
+
+..note:: 
+
+    For <EAL options>, you can use "-c 0x18 -n 4", you can also refer to testpmd doc for other setings.
+    For this test plan, you can use "0000:3b:01.1 --file-prefix=vf" for this test plan. 
 
 3. Set verbose in VF testpmd::
     
@@ -1164,7 +1166,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
 
 5. Validate a switch rule to VF1 in DCF testpmd::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1172,7 +1174,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
 
 6. Create a switch rule to VF1 in DCF testpmd and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1185,11 +1187,11 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-7. Send a matched packet in scapy to VF1, check the VF1 of DUT can receive the packet::
+7. Send a matched packet in scapy to VF1, check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst='C6:44:32:0A:EC:E1')/IP(src='192.168.0.2', dst='192.168.0.3')/("X"*64)],iface="ens260f0",count=1)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1197,20 +1199,37 @@ the VF1 of DUT::
   src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
   ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
 
-8. Check the process ID and kill DCF process::
+All the packets in this test plan use below settings:
+dst src: 00:11:22:33:44:55
+dst mac: C6:44:32:0A:EC:E1
+ipv4 src: 192.168.0.2
+ipv4 dst: 192.168.0.3
+
+Test Case 1: two_testpmd_dcf_reset_port
+---------------------------------------
+The test case resets DCF by killing DCF and resetting the port, and DCF should clean up all old rules.
+
+Test Steps
+~~~~~~~~~~
+1. Check the process ID and kill DCF process::
 
     # ps -ef |grep testpmd 
     # kill -9 #####
 
-9. Relaunch the userland ``testpmd`` application on DUT as follows::
+2. Relaunch the userland ``testpmd`` application on DUT as follows::
+
+    <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device id> -- -i 
+
+..note:: 
 
-    # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd  -v -c 0x6 -n 4 -a 0000:3b:01.0,cap=dcf --file-prefix=dcf -- -i
+    For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
+    For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf --file-prefix=dcf" for this test plan.
 
-10. Send a matched packet in scapy to VF1, DCF flow rule is still valid and check the VF1 of DUT can receive the packet::
+3. Send a matched packet in scapy to VF1, DCF flow rule is still valid and check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1218,31 +1237,26 @@ the VF1 of DUT::
   src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
   ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
 
-Test Case 1: two_testpmd_dcf_reset_port
----------------------------------------
-The test case resets DCF by resetting the port, and DCF should clean up all old rules.
-
-Test Steps
-~~~~~~~~~~
-1. Reset port in DCF testpmd::
+4. Reset port in DCF testpmd::
 
     testpmd> stop
     testpmd> port stop all
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
+    testpmd> flow list 0
 
-2. Validate a switch rule to VF1 in DCF testpmd::
+5. Validate a switch rule to VF1 in DCF testpmd::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
      Flow rule validated
 
-3. Create a switch rule to VF1 in DCF testpmd and list rules::
+6. Create a switch rule to VF1 in DCF testpmd and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1255,11 +1269,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-4. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet::
+7. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1284,10 +1298,11 @@ Test Steps
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
+    testpmd> flow list 0
 
 3. Validate a switch rule to VF1 in DCF testpmd::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1295,7 +1310,7 @@ Test Steps
 
 4. Create a switch rule to VF1 in DCF testpmd and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1308,11 +1323,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1339,10 +1354,11 @@ Test Steps
     testpmd> port reset 0
     testpmd> port start 0
     testpmd> start
+    testpmd> flow list 0
 
 3. Validate a switch rule to VF1 in DCF testpmd::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1350,7 +1366,7 @@ Test Steps
 
 4. Create a switch rule to VF1 in DCF testpmd and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1363,11 +1379,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1377,7 +1393,7 @@ the VF1 of DUT::
 
 Test Case 4: two_testpmd_dcf_reset_mtu
 --------------------------------------
-The test case resets DCF by reseting the mtu, and DCF should clean up all old rules.
+The test case resets DCF by resetting the mtu, and DCF should clean up all old rules.
 
 Test Steps
 ~~~~~~~~~~
@@ -1392,10 +1408,11 @@ Test Steps
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
+    testpmd> flow list 0
    
 3. Validate a switch rule to VF1 in DCF testpmd::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1403,7 +1420,7 @@ Test Steps
 
 4. Create a switch rule to VF1 in DCF testpmd and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1416,11 +1433,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1430,7 +1447,7 @@ the VF1 of DUT::
   
 Test Case 5: two_testpmd_dcf_reset_mac
 --------------------------------------
-The test case resets DCF by reseting mac addr, and DCF should clean up all old rules.
+The test case resets DCF by resetting mac addr, and DCF should clean up all old rules.
 
 Test Steps
 ~~~~~~~~~~
@@ -1445,10 +1462,11 @@ Test Steps
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
+    testpmd> flow list 0
 
 3. Validate a switch rule to VF1 in DCF testpmd::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1456,7 +1474,7 @@ Test Steps
 
 4. Create a switch rule to VF1 in DCF testpmd and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1469,11 +1487,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check the VF1 of DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 the VF1 of DUT::
 
@@ -1487,7 +1505,12 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
 
 1. Launch the userland ``testpmd`` application on DUT as follows::
 
-    # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -v -c 0x6 -n 4 -a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf -- -i
+    <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device id> -- -i 
+
+..note:: 
+
+    For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
+    For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf" for this test plan.
 
 2. Set verbose::
     
@@ -1500,7 +1523,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
 
 4. Validate a switch rule to VF1::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1508,7 +1531,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
 
 5. Create a switch rule to VF1 and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1521,11 +1544,11 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-6. Send a matched packet in scapy to VF1, check DUT can receive the packet::
+6. Send a matched packet in scapy to VF1, check DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 DUT::
 
@@ -1533,41 +1556,47 @@ DUT::
   src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
   ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
 
-7. Check the process ID and kill DCF process::
+Test Case 6: one_testpmd_dcf_reset_port
+---------------------------------------
+The test case resets DCF by killing DCF and resetting the port, and DCF should clean up all old rules.
+
+Test Steps
+~~~~~~~~~~
+1. Check the process ID and kill DCF process::
 
     # ps -ef |grep testpmd 
     # kill -9 #####
 
-8. Relaunch the userland ``testpmd`` application on DUT as follows::
+2. Relaunch the userland ``testpmd`` application on DUT as follows::
+
+    <dpdk build dir>/app/dpdk-testpmd <EAL options> -a <DUT port pci device id> -- -i 
+
+..note:: 
 
-    # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -v -c 0x6 -n 4 -a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf -- -i
+    For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
+    For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf" for this test plan.
 
-9. Set verbose::
+3. Set verbose::
     
      testpmd> set verbose 1
     
-10. Set fwd engine and start::
+4. Set fwd engine and start::
 
      testpmd> set fwd mac
      testpmd> start
+     testpmd> flow list 0
 
-11. Send a matched packet in scapy to VF1, DCF flow rule is cleared and check DUT can't receive the packet::
+5. Send a matched packet in scapy to VF1, DCF flow rule is cleared and check DUT can't receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 DUT::
 
     testpmd> 
 
-Test Case 6: one_testpmd_dcf_reset_port
----------------------------------------
-The test case resets DCF by resetting the port, and DCF should clean up all old rules.
-
-Test Steps
-~~~~~~~~~~
-1. Reset port in testpmd::
+6. Reset port in testpmd::
    
     testpmd> stop
     testpmd> port stop all
@@ -1575,17 +1604,17 @@ Test Steps
     testpmd> port start all
     testpmd> start
 
-2. Validate a switch rule to VF1::
+7. Validate a switch rule to VF1::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
      Flow rule validated
 
-3. Create a switch rule to VF1 and list rules::
+8. Create a switch rule to VF1 and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1598,11 +1627,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-4. Send a matched packet in scapy to VF1, and check DUT can receive the packet::
+9. Send a matched packet in scapy to VF1, and check DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 DUT::
 
@@ -1627,10 +1656,11 @@ Test Steps
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
+    testpmd> flow list 0
 
 3. Validate a switch rule to VF1::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1638,7 +1668,7 @@ Test Steps
 
 4. Create a switch rule to VF1 and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1651,11 +1681,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 DUT::
 
@@ -1682,10 +1712,11 @@ Test Steps
     testpmd> port reset 0
     testpmd> port start 0
     testpmd> start
+    testpmd> flow list 0
 
 3. Validate a switch rule to VF1::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1693,7 +1724,7 @@ Test Steps
 
 4. Create a switch rule to VF1 and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1706,11 +1737,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 DUT::
 
@@ -1735,10 +1766,11 @@ Test Steps
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
-   
+    testpmd> flow list 0    
+
 3. Validate a switch rule to VF1::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1746,7 +1778,7 @@ Test Steps
 
 4. Create a switch rule to VF1 and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1759,13 +1791,13 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
-DUT::
+:wqDUT::
 
     testpmd> port 1/queue 0: received 1 packets
   src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
@@ -1788,10 +1820,11 @@ Test Steps
     testpmd> port reset all
     testpmd> port start all
     testpmd> start
+    testpmd> flow list 0
 
 3. Validate a switch rule to VF1::
 
-     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1799,7 +1832,7 @@ Test Steps
 
 4. Create a switch rule to VF1 and list rules::
 
-     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+     testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
 
    Get the message::
 
@@ -1812,11 +1845,11 @@ Test Steps
    ID      Group   Prio    Attr    Rule
    0       0       0       i--     ETH IPV4 => VF
 
-5. Send a matched packet in scapy to VF1, and check DUT can receive the packet::
+5. Send a matched packet in scapy to VF1, and check DUT can receive the packet.
 
 Tester::
 
-    >>> sendp([Ether(src="00:11:22:33:44:55", dst="C6:44:32:0A:EC:E1")/IP(src="192.168.0.2", dst="192.168.0.3")/("X"*64)],iface="ens260f0",count=1,inter=0,verbose=False)
+    >>> sendp([Ether(src="<src mac>",dst="<dst mac>")/IP(src="<ipv4 src>",dst="<ipv4 dst>")/("X"*64)], iface="<tester interface>")
 
 DUT::
 
@@ -1824,4 +1857,4 @@ DUT::
   src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG  - sw ptype: L2_ETHER L3_IPV4  - l2_len=14 - l3_len=20 - Receive queue=0x0
   ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
 
-    
+
