@@ -90,7 +90,7 @@ Test Case 1: vf reset -- create two vfs on one pf
5. Run testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -- -i \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 -- -i \
--portmask=0x3
testpmd> set fwd mac
testpmd> start
@@ -159,11 +159,11 @@ Test Case 2: vf reset -- create two vfs on one pf, run testpmd separately
2. Start testpmd on two vf ports::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 \
--socket-mem 1024,1024 -a 81:02.0 --file-prefix=test1 \
-- -i --eth-peer=0,00:11:22:33:44:12 \
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf0 -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 \
--socket-mem 1024,1024 -a 81:02.1 --file-prefix=test2 \
-- -i
@@ -207,7 +207,7 @@ Test Case 3: vf reset -- create one vf on each pf
3. Start one testpmd on two vf ports::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -- -i \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 -- -i \
--portmask=0x3
4. Start forwarding::
@@ -234,7 +234,7 @@ Test Case 4: vlan rx restore -- vf reset all ports
1. Execute the step1-step3 of test case 1, then start the testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -- -i \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 -- -i \
--portmask=0x3
testpmd> set fwd mac
@@ -289,7 +289,7 @@ test Case 5: vlan rx restore -- vf reset one port
1. Execute the step1-step3 of test case 1, then start the testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -- -i \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 -- -i \
--portmask=0x3
testpmd> set fwd mac
@@ -429,7 +429,7 @@ Test Case 7: vlan tx restore
2. Run testpmd::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 -- -i \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 -- -i \
--portmask=0x3
3. Add tx vlan offload on VF1 port, take care the first param is port,
@@ -473,7 +473,7 @@ test Case 8: MAC address restore
3. Start testpmd on two vf ports::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 \
-- -i --portmask=0x3
4. Add MAC address to the vf0 ports::
@@ -544,7 +544,7 @@ test Case 9: vf reset (two vfs passed through to one VM)
bind them to igb_uio driver,and then start testpmd::
./usertools/dpdk-devbind.py -b igb_uio 00:05.0 00:05.1
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x0f -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0x0f -n 4 \
-a 00:05.0 -a 00:05.1 -- -i --portmask=0x3
5. Add MAC address to the vf0 ports, set it in mac forward mode::
@@ -618,14 +618,14 @@ test Case 10: vf reset (two vfs passed through to two VM)
bind the port to igb_uio, then start testpmd on vf0 port::
./tools/dpdk_nic_bind.py --bind=igb_uio 00:05.0
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0xf -n 4 \
-- -i --eth-peer=0,vf1port_macaddr \
login vm1, got VF1 pci device id in vm1, assume it's 00:06.0,
bind the port to igb_uio, then start testpmd on vf1 port::
./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf0 -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0xf0 -n 4 \
-- -i
5. Add vlan on vf0 in vm0, and set fwd mode::
@@ -46,7 +46,7 @@ Test Case: Test the MTU in virtio-net
=====================================
1. Launch the testpmd by below commands on host, and config mtu::
- ./testpmd -c 0xc -n 4 \
+ ./<build_target>/app/dpdk-testpmd -c 0xc -n 4 \
--vdev 'net_vhost0,iface=vhost-net,queues=1' \
-- -i --txd=512 --rxd=128 --nb-cores=1 --port-topology=chained
testpmd> set fwd mac
@@ -70,7 +70,7 @@ Test Case: Test the MTU in virtio-net
4. Bind the virtio driver to igb_uio, launch testpmd in VM, and verify
the mtu in port info is 9000::
- ./testpmd -c 0x03 -n 3 \
+ ./<build_target>/app/dpdk-testpmd -c 0x03 -n 3 \
-- -i --txd=512 --rxd=128 --tx-offloads=0x0 --enable-hw-vlan-strip
testpmd> set fwd mac
testpmd> start
@@ -1599,13 +1599,13 @@ Test Case 24: packed virtqueue vm2vm vectorized-tx path multi-queues test indire
1. Launch vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci \
+ ./<build_target>/app/dpdk-testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \
+ ./<build_target>/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set fwd rxonly
@@ -64,7 +64,6 @@ Prerequisites
to the pools numbers(inclusive) and the VLAN user priority field increments from
0 to 7 (inclusive) for each VLAN ID.
- Build vmdq_dcb example,
- make: make -C examples/vmdq_dcb RTE_SDK=`pwd` T=x86_64-native-linuxapp-gcc
meson: ./<build_target>/examples/dpdk-vmdq_dcb -c 0xff -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 --enable-rss
Test Case 1: Verify VMDQ & DCB with 32 Pools and 4 TCs
@@ -72,7 +71,6 @@ Test Case 1: Verify VMDQ & DCB with 32 Pools and 4 TCs
1. Run the application as the following::
- make: ./examples/vmdq_dcb/build/vmdq_dcb_app -c 0xff -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 --enable-rss
meson: ./<build_target>/examples/dpdk-vmdq_dcb -c 0xff -n 4 -- -p 0x3 --nb-pools 32 --nb-tcs 4 --enable-rss
2. Start traffic transmission using approx 10% of line rate.
@@ -98,7 +96,6 @@ Test Case 2: Verify VMDQ & DCB with 16 Pools and 8 TCs
2. Repeat Test Case 1, with `--nb-pools 16` and `--nb-tcs 8` of the sample application::
- make: ./examples/vmdq_dcb/build/vmdq_dcb_app -c 0xff -n 4 -- -p 0x3 --nb-pools 16 --nb-tcs 8 --enable-rss
meson: ./<build_target>/examples/dpdk-vmdq_dcb -c 0xff -n 4 -- -p 0x3 --nb-pools 16 --nb-tcs 8 --enable-rss
Expected result:
@@ -111,7 +108,6 @@ Expected result:
4. Repeat Test Case 1, with `--nb-pools 16` and `--nb-tcs 8` of the sample application::
- make: ./examples/vmdq_dcb/build/vmdq_dcb_app -c 0xff -n 4 -- -p 0x3 --nb-pools 16 --nb-tcs 8 --enable-rss
meson: ./<build_target>/examples/dpdk-vmdq_dcb -c 0xff -n 4 -- -p 0x3 --nb-pools 16 --nb-tcs 8 --enable-rss
Expected result: